MEAN WELL LPF-90D-48

MEAN WELL LPF-90D SERIES 90 Watt LED Power Supply 90W Single Output Switching Power Supply LPF-90D series Measures: 6.34 x 2.40 x 1.42” ■ ‹ „ �Ž‘   • ‹   ™  š �›€ ‘ …‹   �     ˜œ �…  „ Š   • ‘  • ‘ ‘   • ‘  �       ‘  �‹     �‹   ‡…“ƒ ‘ ™ “š �Ⅱ     ‹ˆ �    � Œ Œ‰† †‘      Ⅰ  †‘        �›€       ™ž  …Ÿ    š �Š   Œ‰†      ‘      �             �Š    •  •     �       IP67 ™   ‚–‚ š ™ ”   ‚–‚ š   SPECIFICATION MODEL LPF-90D-15 LPF-90D-20 LPF-90D-24 LPF-90D-30 LPF-90D-36 LPF-90D-42 LPF-90D-48 LPF-90D-54 DC VOLTAGE 15V 20V 24V 30V 36V 42V 48V 54V CONSTANT CURRENT REGION Note.4 9 ~ 15V 12 ~ 20V 14.4 ~ 24V 18 ~ 30V 21.6 ~ 36V 25.2 ~ 42V 28.8 ~ 48V 32.4 ~ 54V RATED CURRENT 5A 4.5A 3.75A 3A 2.5A 2.15A 1.88A 1.67A RATED POWER 75W 90W 90W 90W 90W 90.3W 90.24W 90.18W 200mVp-p RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 200mVp-p 200mVp-p 200mVp-p 200mVp-p OUTPUT VOLTAGE TOLERANCE Note.3 ±4.0% ±4.0% ±4.0% ±4.0% ±4.0% ±4.0% ±4.0% ±4.0% ±0.5% ±0.5% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±1.5% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME Note.7 1200ms, 200ms / 115VAC at 95% load 500ms, 200ms / 230VAC at 95% load HOLD UP TIME (Typ.) 16ms/230VAC 16ms/115VAC at full load VOLTAGE RANGE Note.5 90 ~ 305VAC 127 ~ 431VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.97/115VAC, PF>0.96/230VAC, PF>0.95/277VAC at full load (Please refer to "Power Factor Characteristic" curve) TOTAL HARMONIC DISTORTION THD< 20% when output loading≧≧ 60% at 115VAC/230VAC input and output loading 75% at 277VAC input INPUT EFFICIENCY (Typ.) 89.5% 90.5% 90.5% 90.5% 90.5% 89% 90% 90.5% AC CURRENT (Typ.) 0.95A / 115VAC 0.5A / 230VAC 0.4A / 277VAC INRUSH CURRENT(Typ.) COLD START 70A(twidth=435μs measured at 50% Ipeak) at 230VAC MAX. No. of PSUs on 16A 4 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 277VAC 95 ~ 108% OVER CURRENT Note.4 Protection type : Constant current limiting, recovers automatically after fault condition is removed 47 ~ 53V 59 ~ 65V 18 ~ 21V 23 ~ 27V 28 ~ 34V 34 ~ 38V 41 ~ 46V 54 ~ 60V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, re-power on to recover WORKING TEMP. -40 ~ +70℃ (Refer to "Derating Curve") 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80℃, 10 ~ 95% RH TEMP. COEFFICIENT ±℃ 0.03%/ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750(type”HL”), CSA C22.2 No.250.13-12, ENEC EN61347-1, EN61347-2-13 independent, EN62384, J61347-1, J61347-2-13, SAFETY STANDARDS IP67 approved ; Design refer to UL60950-1, TUV EN60950-1 WITHSTAND VOLTAGE I/P-O/P:3.75KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH EMC EMC EMISSION Compliance to EN55015, EN61000-3-2 Class C (≧60% load) ; EN61000-3-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level(surge 2KV), criteria B MTBF 267.2Khrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 161*61*36mm (L*W*H) 0.7Kg; 20pcs/15Kg/0.73CUFT PACKING                 ℃    NOTE 
               ­  €      ‚ƒ       „                ‚ …   ­†
‡‡ˆ ‰†Š ‹ Œ‰† †ŽŒ‰­  †        ‘   … ’         “ Š               ”  … ‘      ‘   ƒ Œ               •‹‹              –                       — Š ‰               —   €— ‰ †‘         ˜ †     Œ‰†                ‘    —    ‰…         ”  Œ‰†                    File Name:LPF-90D-SPEC 2016-02-18 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-LPF-90D-power-supply.html h t t p: / / pow e r. sa ge r. c om MEAN WELL LPF-90D SERIES 90 Watt LED Power Supply 90W Single Output Switching Power Supply LPF-90D series Measures: 6.34 x 2.40 x 1.42” Mechanical Specification Case No.LPF-90A Unit:mm 161 4 300±20 300±20 AC/L(Brown) +V(Red) AC/N(Blue) -V(Black) SJTW 18AWG×2C DIM+(Blue) T case Style 2464 18AWG×4C DIM-(White) 91 4 ※ T case: Max. Case Temperature. Recommend Mounting Direction Block Diagram fosc : 100KHz RECTIFIERS EMI FILTER POWER PFC +V I/P & & SWITCHING CIRCUIT -V RECTIFIERS FILTER DIM+ O.L.P. DIM- O.T.P. O.L.P. DETECTION CIRCUIT PWM & PFC CONTROL O.V.P. Derating Curve Static Characteristics 100 100 90 80 80 230VAC Input only 70 60 60 40 50 20 40 -40 -25 -10 0 15 30 50 60 70 (HORIZONTAL) 90 100 125 135 145 155 165 175 180 200 230 305 AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (V) 60Hz File Name:LPF-90D-SPEC 2016-02-18 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-LPF-90D-power-supply.html h t t p: / / pow e r. sa ge r. c om ψ4.5 ψ4.5 LOAD (%) 4 61 9 LOAD (%) 4 36 MEAN WELL LPF-90D SERIES 90 Watt LED Power Supply 90W Single Output Switching Power Supply LPF-90D series Measures: 6.34 x 2.40 x 1.42” Power Factor Characteristic Constant Current Mode 1 0.99 0.98 277V A C 230V A C 0.97 115V A C 0.96 0.95 50% 60% 70% 80% 90% 100% (90W) LOAD EFFICIENCY vs LOAD (48V Model) LPF-90D series possess superior working efficiency that up to 90.5% can be reached in field applications. 92 91 90 89 88 87 86 277VAC 85 84 230VAC 83 115VAC 82 81 80 79 78 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD DRIVING METHODS OF LED MODULE This LED power supply is suggested to work in constant current mode area (CC) to drive the LEDs. In the constant current region, the highest voltage at the output of the driver 100 depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL. Constant Current area 60 (min.) Hiccup Protection 50 100 Io (%) Typical LED power supply I-V curve File Name:LPF-90D-SPEC 2016-02-18 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-LPF-90D-power-supply.html h t t p: / / pow e r. sa ge r. c om PF EFFICIENCY (%) Vo(%) MEAN WELL LPF-90D SERIES 90 Watt LED Power Supply 90W Single Output Switching Power Supply LPF-90D series Measures: 6.34 x 2.40 x 1.42” DIMMING OPERATION AC/L(Brown) +V(Red) AC/N(Blue) LPF-90D -V(Black) DIM+(Blue) DIM-(White) ※ Built-in 3 in 1 dimming function, IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistance or 1 ~ 10Vdc or 10V PWM signal between DIM+ and DIM-. ※ Please DO NOT connect "DIM-" to "-V". ※ Reference resistance value for output current adjustment (Typical) Single driver 10KΩ 20KΩ 30KΩ 40KΩ 50KΩ 60KΩ 70KΩ 80KΩ 90KΩ 100KΩ OPEN Resistance Multiple drivers value (N=driver quantity for synchronized 10KΩ/N 20KΩ/N 30KΩ/N 40KΩ/N 50KΩ/N 60KΩ/N 70KΩ/N 80KΩ/N 90KΩ/N 100KΩ/N ----- dimming operation) Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 95%~108% ※ 1 ~ 10V dimming function for output current adjustment (Typical) Dimming value 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V OPEN Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 95%~108% ※ 10V PWM signal for output current adjustment (Typical): Frequency range:100Hz ~ 3KHz Duty value 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% OPEN Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 95%~108% ※ Using the built-in dimming function on LPF-90D can't turn the lighting fixture totally dark. Please refer to the connection method below to achieve 0% brightness of the lighting fixture connecting to the LED power supply unit. Dimming connection diagram for turning the lighting fixture ON/OFF : NL Switch Adjuster Relay 10~100K Ohms resistance 1~10V DC Voltage 10V PWM Signal Blue DIM+ White AC/L DIM- Brown LPF-90D Black V(-) AC/N Red LED Lighting Fixture Blue V(+) Using a switch and relay can turn ON/OFF the lighting fixture. 1.Output constant current level can be adjusted through output cable by connecting a resistor or 1~10Vdc or 10V PWM signal between DIM+ and DIM-. 2.The LED lighting fixture can be turned ON/OFF by the switch. File Name:LPF-90D-SPEC 2016-02-18 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-LPF-90D-power-supply.html h t t p: / / pow e r. sa ge r. c om