MEAN WELL MSP-200-36

Mean Well MSP-200 SERIES 200 Watt Enclosed Power Supply 200W Single Output Medical Type MSP-200 series Measures: 7.83 X 3.86 X 1.50” ■Ž … �Ÿ ‹  •Ž  ­ �¡ ‚ ‹˜Ž  ˜Ž¢£ �­   ž£¤ �š   ­    �˜ …¥  •‹•‹‹­•‹  � ­
 ‹ �¡ ‚      ­  �Ÿž �‹”˜‹– �¡ ‚ ‚ŽŽ  �¥ 
¦ �¡ ‚    �   ™š”Œ– �  SPECIFICATION MODEL MSP-200-3.3 MSP-200-5 MSP-200-7.5 MSP-200-12 MSP-200-15 MSP-200-24 MSP-200-36 MSP-200-48 DC VOLTAGE 3.3V 5V 7.5V 12V 15V 24V 36V 48V RATED CURRENT 40A 35A 26.7A 16.7A 13.4A 8.4A 5.7A 4.3A CURRENT RANGE 0 ~ 40A 0 ~ 35A 0 ~ 26.7A 0 ~ 16.7A 0 ~ 13.4A 0 ~ 8.4A 0 ~ 5.7A 0 ~ 4.3A RATED POWER 132W 175W 200.3W 200.4W 201W 201.6W 205.2W 206.4W RIPPLE & NOISE (max.) Note.2 80mVp-p 90mVp-p 100mVp-p 120mVp-p 150mVp-p 150mVp-p 250mVp-p 250mVp-p OUTPUT VOLTAGE ADJ. RANGE 2.8 ~ 3.8V 4.3 ~ 5.8V 6.8 ~ 9V 10.2 ~ 13.8V 13.5 ~ 18V 21.6 ~ 28.8V 28.8 ~ 39.6V 40.8 ~ 55.2V VOLTAGE TOLERANCE Note.3 ±2.0% ±2.0% ±2.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.3% ±0.3% ±0.2% ±0.2% ±0.2% LOAD REGULATION ±1.5% ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME 1000ms, 50ms/230VAC 2500ms, 50ms/115VAC at full load HOLD UP TIME (Typ.) 16ms/230VAC 16ms/115VAC at full load VOLTAGE RANGE Note.5 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.95/230VAC PF>0.99/115VAC at full load INPUT EFFICIENCY (Typ.) 80% 84% 86% 88% 88% 88% 89% 89% AC CURRENT (Typ.) 2.2A/115VAC 1.1A/230VAC INRUSH CURRENT (Typ.) 35A/115VAC 70A/230VAC LEAKAGE CURRENT Note.7 Earth leakage current < 300 A/264VAC , Touch leakage current < 100μ A/264VAC μ 105 ~ 135% rated output power OVERLOAD Protection type : Constant current limiting, recovers automatically after fault condition is removed 3.96 ~ 4.62V 6 ~ 7V 9.4 ~ 10.9V 14.4 ~ 16.8V 18.8 ~ 21.8V 30 ~ 34.8V 41.4 ~ 48.6V 57.6 ~ 67.2V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, recovers automatically after temperature goes down OVER TEMPERATURE 5VSB : 5V@0.3A ; tolerance±5%, ripple : 50mVp-p(max.) 5V STANDBY FUNCTION REMOTE CONTROL RC+/RC- : 4 ~10V or open = power on ; 0 ~ 0.8V or short = power off -40 ~ +70℃ (Refer to "Derating Curve") WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH TEMP. COEFFICIENT ±℃ 0.03%/ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS ANSI/AAMI ES60601-1, IEC60601-1 approved ISOLATION LEVEL Primary-Secondary: 2×MOOP, Primary-Earth: 1×MOOP SAFETY & WITHSTAND VOLTAGE I/P-O/P:4KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH (Note 4) EMC EMISSION Compliance to EN55011 (CISPR11) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN60601-1-2 MTBF 209.4K hrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 199*98*38mm (L*W*H) PACKING 0.77Kg; 18pcs/14.9Kg/0.9CUFT         ℃
   NOTE    
  
  ­ € ‚    ƒ„    …     ­   ­   ƒ        
    †   ‡
 ˆ 
  ­    Œ‰Œ  Š   †   
‚  ‡‹ Ž­      ‡‘‡’ ­   “”‹
  …•• – — ­
    ‹­˜ Š  ­ ‹ Œ   ™š  ›‚”   –œž  „       —    File Name:MSP-200-SPEC 2016-02-24 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-MSP-200-power-supply.html h t t p: / / pow e r. sa ge r. c om 1 5 2 6 3-M3 ψ3.5 ψ3.5 Mean Well MSP-200 SERIES 200 Watt Enclosed Power Supply 200W Single Output Medical Type MSP-200 series Measures: 7.83 X 3.86 X 1.50” Mechanical Specification Case No.902E Unit:mm 197 1 2 3 4 5 6 7 LED CN100 Terminal Pin No. Assignment SVR1 Pin No. Assignment Pin No. Assignment 1 AC/L 4,5 DC OUTPUT -V 57.5 120 4.5 2 AC/N 6,7 DC OUTPUT +V 199 3 FG 6.5 190 Connector Pin No. Assignment (CN100) : HRS DF11-6DP-2DS or equivalent Pin No. Assignment Mating Housing Terminal 1 RC+ 2 RC- 3 AUX HRS DF11-6DS HRS DF11-**SC 13max. 4 AUXG or equivalent or equivalent 28 150.75 5 +S 6 -S fosc :70KHz Block Diagram RECTIFIERS AUX AUX & POWER AUXG FILTER +S ACTIVE RECTIFIERS RECTIFIERS EMI +V INRUSH POWER & I/P & FILTER CURRENT SWITCHING -V PFC FILTER LIMITING -S DETECTION O.L.P. O.T.P. CIRCUIT FG O.V.P. PFC PWM CONTROL CONTROL RC+ REMOTE CONTROL RC- Derating Curve Output Derating VS Input Voltage 100 125 100 90 80 80 70 60 60 40 50 20 40 -40 0 10 20 30 40 50 60 70 (HORIZONT (HORIZONTAL) AL) 85 100 125 135 155 264 AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (V) 60Hz File Name:MSP-200-SPEC 2016-02-24 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-MSP-200-power-supply.html h t t p: / / pow e r. sa ge r. c om 4-M3 LOAD (%) 8.2 9.5 9 18.5 LOAD(%) 9 80 18 9.5 3.5 3.5 28.5 85.5 7 38 98 Mean Well MSP-200 SERIES 200 Watt Enclosed Power Supply 200W Single Output Medical Type MSP-200 series Measures: 7.83 X 3.86 X 1.50” Function Description of CN100 Pin No. Function Description 1 RC+ Turns the output on and off by electrical or dry contact between pin 2 (RC-). Short: Power OFF, Open: Power ON. RC- 2 Remote control ground. Auxiliary voltage output, 4.75~5.25V, referenced to pin 4(AUXG). The maximum load current is 0.3A. This output is not controlled by the 3 AUX "remote ON/OFF control". Auxiliary voltage output ground. The signal return is isolated from the output terminals (+V & -V). 4 AUXG Positive sensing. The +S signal should be connected to the positive terminal of the load. The +S and -S leads should be twisted in pair to 5 +S minimize noise pick-up effect. The maximum line drop compensation is 0.5V. Negative sensing. The -S signal should be connected to the negative terminal of the load. The -S and +S leads should be twisted in pair to 6 -S minimize noise pick-up effect. The maximum line drop compensation is 0.5V. Function Manual 1.Remote Control The PSU can be turned ON/OFF by using the "Remote ON/OFF" function Between RC-(pin2) and RC+(pin1) Output Status SW ON (Short) OFF SW OFF (Open) ON CN100 1 RC+ AUX +S 5 SW 2 RC- AUXG -S 6 -V -V +V +V CN100 1 3 5 2 4 6 LOAD - + Fig 1.1 2.Remote Sense The remote sensing compensates voltage drop on the load wiring up to 0.5V. -V -V +V +V CN100 1 3 5 2 4 6 CN100 RC+ AUX +S 1 5 Sense lines should 2 RC- AUXG -S 6 LOAD +S be twisted in pairs -S (Pin5) (Pin6) - + Fig 2.1 File Name:MSP-200-SPEC 2016-02-24 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-MSP-200-power-supply.html h t t p: / / pow e r. sa ge r. c om