MEAN WELL NSD15-48S15
Specifications
Manufacturer
MEAN WELL
Manufacturers Part #
NSD15-48S15
Lead Time
10 Week Lead Time
Series
NSD15-S
Factory Pack Quantity
1
Cooling Method
Convection
Dimensions
2.00 x 1.50 x 0.38"
Efficiency
85%
Input Type
DC
Input Voltage Nominal
48 VDC
Isolation
1500 VDC
Mechanical Style
Isolated
Mounting
Through Hole
Number of Outputs
1
Operating Temperature
- 25 to + 70°C
Output Amps 1
1 A
Output Voltage V1 Nominal
15 VDC
Power
15 W
Subcategory
DC-DC Converter
Datasheet
Extracted Text
15W DC-DC Regulated Single Output NSD15-S series ■�8��������/ ‧@�����/��������������*� ‧A����������/�0)������������=��7�������=��7���7����*� ‧��$$����:=������������ ‧B����,���3%:� ����� ‧������*�!�� �����������7������ ‧�������7����*���������*� ������� ‧B����,������������,�88�������� ‧�$$?� ���������!���,����������� ‧C�(����� ‧&�*)������!����� ‧��������(������� SPECIFICATION MODEL NSD15-12S3 NSD15-12S5 NSD15-12S12 NSD15-12S15 NSD15-48S3 NSD15-48S5 NSD15-48S12 NSD15-48S15 DC VOLTAGE 3.3V 5V 12V 15V 3.3V 5V 12V 15V RATED CURRENT 3.75A 3A 1.25A 1A 3.75A 3A 1.25A 1A CURRENT RANGE 0.18 ~ 3.75A 0.15 ~ 3A 0.06 ~ 1.25A 0.05 ~ 1A 0.18 ~ 3.75A 0.15 ~ 3A 0.06 ~ 1.25A 0.05 ~ 1A RATED POWER 12.375W 15W 15W 15W 12.375W 15W 15W 15W CAPACITIVE LOAD (max.) 3300uF OUTPUT RIPPLE & NOISE (max.) Note.2 100mVp-p(25% ~ 100% load) for 3.3V only 75mVp-p(25% ~ 100% load) VOLTAGE TOLERANCE Note.3 ±2.0% LINE REGULATION ±1.0% at 10% ~ 100% load LOAD REGULATION ±1.0% at 10% ~ 100% load TRIM OUTPUT (Typ.) +10% ±5.0% ±5.0% ±3.0% +10% ±5.0% ±5.0% ±3.0% SETUP TIME 100ms/RATED DC INPUT at full Load 48VDC RATED DC INPUT 12VDC 9.4 ~ 36VDC 18 ~ 72VDC VOLTAGE RANGE EFFICIENCY (Typ.) 73% 77% 81% 81% 77% 81% 84% 85% INPUT DC CURRENT 1.8A/12VDC 0.4A/48VDC SHUTDOWN IDLE CURRENT 20mA Above 105% rated output power OVERLOAD Protection type : Over power limiting, recovers automatically after fault condition is removed PROTECTION OVER VOLTAGE(CLAMP) 5.8 ~ 6.93V 5.8 ~ 7.5V 13.8 ~ 18V 17.25 ~ 22.5V 5.61 ~ 6.93V 5.5 ~ 7.5V 13.8 ~ 18V 17.25 ~ 22.5V Recovers automatically after fault condition is removed SHORT CIRCUIT Note.4 FUNCTION Logic "1" or open circuit : ON Logic "0" or short to PIN2 : OFF ON/OFF CONTROL -25 ~ +70℃ WORKING TEMP. 0% ~ 95% RH max. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 0 ~ 95% RH TEMP. COEFFICIENT ±℃ 0.03%/ (0~50℃) UL60950-1, EAC TP TC 004 approved, Design refer to TUV EN60950-1 SAFETY STANDARDS ISOLATION VOLTAGE I/P-O/P:1.5KVDC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH EMC (Note 5) EMC EMISSION Compliance to EN55032 (CISPR32) Class B, EAC TP TC 020 EMC IMMUNITY Compliance to EN61000-4-2,3,4,6,8; EN55024, light industry level, criteria A, EAC TP TC 020 MTBF 1734K hrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 50.8*38.1*9.82mm (2"*1.5"*0.387") (L*W*H) 0.03Kg; 180pcs/6.4Kg/0.97CUFT PACKING ��������������������������������������������������������������������������������������������℃�� ���!����������������� NOTE ���"������#������������������������$%&’�� �!���(���)�!������*�����+��(����������,(���������������(��)���$��� �#��-� �������������������� .������������/�����������������������������������*�������������������*�������� ���0)���������������������)���1$��������� ����)����(������������������������������������()��)�(����!������������������� ������2��������������)��3%������������!�����4�������!���������*��)����������� �����.$��5�.$���������������(��)������ ��)��6�������)�� ������2�������������!����,��� �������)������������������3%���������7����8���*�����������)�(���� ������� �����)����3%������������������ ������93%:�������*�� �������������(������������;�<����7����!������)���/==(((�����(�������> 1���������*�����$?���������������� ����0���,��0�����������������������7����*���8�����������(����*������!����2������()����)��������7����*�����)�*)����)����$���� -��3%�� ��������**������/ �$�& E E E 1�$�8 A0D ��� �� , , �����)����!������������������������*�� �.��℃℃ =�$$$��(��)� ������������������� �� =�$$$��(��)� ���������� �����������*����������)�*)����)����$$$�<1�$$ �>� File Name:NSD15-S-SPEC 2018-01-12 15W DC-DC Regulated Single Output NSD15-S series Mechanical Specification Unit:mm[inch] 50.8[2] 1.8[0.071] 1[0.039] 6 1 +VOUT +VIN 2 -VIN 7 -VOUT 4 CONTROL 8 TRIM 45.72 [1.8] 50.8 [2] Pin No. Assignment Pin No. Assignment Pin No. Assignment 1 +VIN 6 +VOUT 2 -VIN 7 -VOUT 3,5 No Pin 8 TRIM 4 CONTROL Block Diagram fosc : 400KHz RECTIFIERS POWER +VOUT EMI I/P & SWITCHING FILTER -VOUT FILTER DETECTION O.L.P. PWM TRIM CIRCUIT CONTROL CTRL O.V.P. Derating Curve ON/OFF Control & Output Trim 1 6 +VIN +VOUT 100 LOAD 2 7 0 ~ 100KΩ -VIN -VOUT 80 0 ~ 100KΩ 75 8 4 60 TRIM CTRL UP DOWN TRIMPOT 40 CONTROL INPUT.....................................PIN4 20 CONTROL COMMON................................PIN2 LOGIC COMPATIBILITY......CMOS OR OPEN COLLECTOR TTL -25 0 10 20 30 40 50 60 70 (HORIZONTAL) CONTROL VOLTAGE ON............+5.5VDC min OR OPEN CIRCUIT AMBIENT TEMPERATURE (℃) OFF......+2.5VDC max. OR SHORT TO PIN2 File Name:NSD15-S-SPEC 2018-01-12 10.8[0.425] LOAD (%) 38.1[1.5] 6.35[0.25] 10.16[0.4] 5.08[0.2] 13.33[0.525] 5.84[0.23] 3.81[0.15] 10.16[0.4] 10.16[0.4] 9.82[0.387]
Frequently asked questions
How does Electronics Finder differ from its competitors?

Is there a warranty for the NSD15-48S15?

Which carrier will Electronics Finder use to ship my parts?

Can I buy parts from Electronics Finder if I am outside the USA?

Which payment methods does Electronics Finder accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods