MEAN WELL P25A14-R1BU

25W AC-DC Dual Output Desktop P25A-D s e ri e s Features : 3 pole AC inlet IEC320-C14 Class power (with earth pin) Protections: Short circuit / Overload / Over voltage / Over temp. Fully enclosed plastic case Fix switching frequency and regulation Topology: Top switch circuit LED indicator for power on Approvals: UL / CUL / TUV / CB / CE 1 year warranty TUV geprUfre Rheinland Product Safety Sicherheit SPECIFICATION ORDER NO. P25A13-R1B P25A14-R1B P25A16-R1B SAFETY MODEL NO. PSU25A-13 PSU25A-14 PSU25A-16 DC VOLTAGE Note.2 5V 12V 5V 15V 5V 24V RATED CURRENT 2.5A 1.0A 2.5A 0.8A 2.5A 0.5A CURRENT RANGE 0.5 ~ 2.5A 0.1 ~ 1.0A 0.5 ~ 2.5A 0.1 ~0.8A 0.5 ~ 2.5A 0.1 ~ 0.5A RATED POWER 25W 25W 25W RIPPLE & NOISE (max.) Note.3 50mVp-p 100mVp-p 50mVp-p 100mVp-p 50mVp-p 100mVp-p OUTPUT VOLTAGE ADJ. RANGE Fixed VOLTAGE TOLERANCE Note.4 5.0% 5.0% 5.0% 5.0% 5.0% 5.0% LINE REGULATION Note.5 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION Note.6 4.0% 4.0% 4.0% 4.0% 4.0% 4.0% SETUP, RISE, HOLD UP TIME 200ms, 50ms, 16ms at full load VOLTAGE RANGE 90 ~ 264VAC 135 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 70% 72% 74% INPUT AC CURRENT 0.8A / 100VAC INRUSH CURRENT (max.) 60A / 230VAC LEAKAGE CURRENT(max.) 0.75mA / 240VAC 115 ~ 160% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed +5V: 110 ~ 140% rated output voltage PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover IC1Tj135 OVER TEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down 0 ~ +40 (Refer to output load derating curve) WORKING TEMP. WORKING HUMIDITY 20% ~ 90% RH non-condensing STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT 0.03% / (0 ~ 50 ) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS UL1950, CSA22.2, EN60950-1 Approved WITHSTAND VOLTAGE I/P-O/P:3KVAC , I/P-FG:1.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P,I/P-FG:100M Ohms / 500VDC / 25 / 70% RH EMC Compliance to EN55022(CISPR22) class B EMI CONDUCTION & RADIATION (Note. 7) HARMONIC CURRENT Compliance to EN61000-3-2,3 EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,11, Light industry level, criteria A MTBF 520K hrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION 108*67*36mm (L*W*H) 0.3kg ; 54pcs/ 20kg/ CARTON PACKING Standard type R1B: DIN 5PIN for stock ; Other type available by customer requested PLUG CONNECTOR CABLE Standard type UL2464 18AWG*3C shield wire*1C with 5fts length for stock; Other type available by customer requested 1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. NOTE 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 20% to 100% rated load. 7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:P25A-D-SPEC 2007-03-01 25W AC-DC Dual Output Desktop P25A-D s e ri e s Mechanical Specification Unit:mm UL2464 18AWG 1530+100/-0 MALE CABLE PLUG 106 36 54.8 10.2 POWER LED 108 Plug Assignment 69.9 18 Standard plug: R1B (option) PIN NO OUTPUT 1 COM 3 o 45 2 5 2 COM 4 3 1 3 +5VDC R1 4 COM AC FG 5 +Vout NAME PLATE RUBBER FOOTX4 Derating Curve Static Characteristics 100 100 80 70 60 50 0 10 20 30 40 0 60 70 80 90 100 260 Ta ( ) INPUT VOLTAGE File Name:P25A-D-SPEC 2007-03-01 LOAD (%) 67 45 36 SWITCHING ADAPTOR 42 67 LOAD (%) 33.5