MEAN WELL PB-600-48

MEAN WELL PB-600 SERIES 600 Watt Battery Charger Power Supply 600W Intelligent Single Output Battery Charger PB-600 series Measures: 9.06 x 6.22 x 2.64” ■‚‡ �     �
 � �  �­€  ‚ �€ƒ‚ƒ‚„…† �ƒ‡ˆ€ ‰Š€€Š€  �‹Œ �ŠŠ‚‚ �   �    �Ž Bauart gepruft Sicherheit egelma ge od os be wac g www.tuv.com ID 2000000000 SPECIFICATION MODEL PB-600-12 PB-600-24 PB-600-48 BOOST CHARGE VOLTAGE Vboost 14.4V 28.8V 57.6V FLOAT CHARGE VOLTAGE Vfloat 13.8V 27.6V 55.2V RECOMMENDED BATTERY OUTPUT 135 ~ 400AH 70 ~ 210AH 35 ~ 105AH CAPACITY(AMP HOURS)(Note 4) BATTERY TYPE Open & Sealed Lead Acid OUTPUT CURRENT 40A 21A 10.5A VOLTAGE RANGE 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) 0.95/230VAC 0.98/115VAC at full load INPUT EFFICIENCY (Typ.) 86% 87% 89% AC CURRENT (Typ.) 6.8A/115VAC 3.4A/230VAC INRUSH CURRENT (Typ.) 25A/115VAC 50A/230VAC LEAKAGE CURRENT <3.5mA / 240VAC 16 ~ 18V 32 ~ 35V 64.5 ~ 69.5V OVER VOLTAGE PROTECTION Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down REMOTE CONTROL Open: Normal work Short: Stop Charging LEAKAGE CURRENT FROM BATTERY (Typ.) 1mA FAST CHARGE 2 / 3 / 8 stage selectable FUNCTION CHARGER OK Relay contact (RY15) OUTPUT OK Relay contact (RY13) TEMPERATURE SENSE By NTC WORKING TEMP. -20 ~ +60℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT -40 ~ +85℃, 10 ~ 95% RH STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT ±℃ 0.05%/ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL1012, TUV EN60335-1, EN60335-2-29 (except for 48V), EN60950-1(48V only) approved SAFETY STANDARDS WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE EMC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH (Note 3) EMC EMISSION Compliance to EN55022 class B (CISPR22), EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024; light industry level, criteria A MTBF 135.6K hrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 230*158*67mm(L*W*H) 2.2Kg; 6pcs/14.2Kg/1.76CUFT PACKING   ‘ ƒ€ ‹ ’‹ NOTE
  Š“ 
…”   
℃   “ Ž    ŽŽ‘ “‘  ‹ € •“ ’–ƒ— ƒ˜˜Ž Ž File Name:PB-600-SPEC 2015-12-15 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-PB-600-power-supply.html h t t p: / / pow e r. sa ge r. c om Power Stage 8/3/2 12 34 56 78 9 10 MEAN WELL PB-600 SERIES 600 Watt Battery Charger Power Supply 600W Intelligent Single Output Battery Charger PB-600 series Measures: 9.06 x 6.22 x 2.64” Mechanical Specification Case No.805C Unit:mm 230 145 42.5 67 7 ON/OFF SWITCH INLET Air flow 48 direction 24.1 ※ LED Loading Indicator Status Table Status Steady Flashing Color Red Abnormal status Orange Charging Green Full Charging ※ Control Pin No. Assignment(CN100) : HRS DF11-10DP-2DS or equivalent 7 1 9 5 3 Mating Housing HRS DF11-10DS or equivalent 10 8 6 4 2 Terminal HRS DF11-**SC or equivalent CN100 Pin No. Function Description RY13 : Battery Bank OK relay. 1,2 RY13 Relay contact rating(max.) : 30V/1A resistive. ; "Short" when the battery is full, "Open" when the battery is still charging. RY15 : Charger OK relay. 5,6 RY15 Relay contact rating(max.) : 30V/1A resistive. ; "Short" when the unit is working properly, "Open" when the unit is failure or the protection function is activating. 7 NTC / GND : Temperature sense GND Temperature sensor comes along with the charger can be connected to the unit to allow temperature compensation of the NTC(5KΩ) 8 charging voltage RTH Remote ON/OFF function. 9,10 RC- / RC+ Turn the output on and off by electrical or dry contact between pin 10 (RC+) and pin 9(RC-). "Open" : Normal work ; "Short" : Stop charging File Name:PB-600-SPEC 2015-12-15 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-PB-600-power-supply.html h t t p: / / pow e r. sa ge r. c om 158 67 33 9 ON OFF AC INPUT MEAN WELL PB-600 SERIES 600 Watt Battery Charger Power Supply Measures: 9.06 x 6.22 x 2.64” 600W Intelligent Single Output Battery Charger PB-600 series Block Diagram PFC : 95KHz PWM fosc : 60KHz ACTIVE RECTIFIER RECTIFIER POWER EMI INRUSH +V I/P & & CURRENT FILTER SWITCHING PFC FILTER LIMITING PFC REVERSE CONTROL PWM DETECTION CURRENT MCU CONTROL DETECTION 2/8 STAGE SELECT AUX FAN POWER REMOTE RC CONTROL OTP Bank OK RY13 Charger OK RY15 Derating Curve Static Characteristics 100 100 90 80 80 70 60 60 40 50 20 40 90 95 100 115 264 -20 0 10 20 30 40 50 60 70 (HORIZONTAL) AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (VAC) 60Hz Charging Curve 2 Stage 3 Stage Start Start Vboost Vboost Vfloat Charge Voltage Charge Voltage 100% 100% 10% 10% Charge Current Constant Current Constant Voltage Charge Current Constant Current Constant Voltage Float stage 1 stage 2 stage 1 stage 2 stage 3 Orange Green Orange Green Color of LED Color of LED State PB-600-12 PB-600-24 PB-600-48 State PB-600-12 PB-600-24 PB-600-48 Constant Constant 40A 21A 10.5A 40A 21A 10.5A Current Current Vboost 14.4V 28.8V 57.6V Vboost 14.4V 28.8V 57.6V Vfloat 13.8V 27.6V 55.2V ◎ Suitable for lead-acid batteries (flooded, Gel and AGM) and ◎ Suitable for lead-acid batteries (flooded, Gel and AGM) and Li-ion batteries (lithium iron and lithium manganese). Li-ion batteries (lithium iron and lithium manganese). File Name:PB-600-SPEC 2015-12-15 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-PB-600-power-supply.html h t t p: / / pow e r. sa ge r. c om LOAD (%) LOAD (%) MEAN WELL PB-600 SERIES 600 Watt Battery Charger Power Supply Measures: 9.06 x 6.22 x 2.64” 600W Intelligent Single Output Battery Charger PB-600 series 8 Stage Pulse Soft Start Analysis Recond Float Maintain Constant Current Constant Voltage Charge Voltage Charge Current stage 1 stage 2 stage 3 stage 4 stage 5 stage 6 stage 7 stage 8 Color of LED Orange Green Loading Indicator ◎ Suitablefor lead-acid batteries (flooded, Gel and AGM). ◎ “stage 1”(Pulse) and “stage 2"(Soft Start) provide battery rescue function. CN100 2,3, or 8 stage charging select 1 RY13 RY13 2 (1)The charger features user selectable 2,3, or 8 stage charging. The charging profile is selected by moving the slide switch NC NC Power on the back panel. Stage 8/3/2 RY15 RY15 Switch Charging mode 12 GND RTH Right 2 stage charging 34 56 78 9 10 Middle 3 stage charging 9 10 RC- RC+ Left 8 stage charging + - (2)Please choose the "3 stage" selection when the charger Battery is used to charge the batteries and power the loads in the same time. Function Manual 1.Remote Control The charger can be turned ON/OFF by using the CN100 "Remote Control" function. 1 RY13 RY13 2 Between RC+(pin10) and RC-(pin9) Charging NC NC Power SW Open ON Stage 8/3/2 RY15 RY15 SW Short OFF GND RTH 12 34 56 78 9 10 9 10 RC- RC+ SW + - Battery File Name:PB-600-SPEC 2015-12-15 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-PB-600-power-supply.html h t t p: / / pow e r. sa ge r. c om MEAN WELL PB-600 SERIES 600 Watt Battery Charger Power Supply 600W Intelligent Single Output Battery Charger PB-600 series Measures: 9.06 x 6.22 x 2.64” 2.Charger OK Relay(RY15) CN100 Charger Between pin5 and pin6(RY15) 1 RY13 RY13 2 Power Work normally ON (Short) Stage 8/3/2 NC NC Failure or protection function OFF (Open) activated RY15 RY15 12 34 56 78 GND RTH 9 10 10 9 RC- RC+ + - RY15 Battery 3.Output OK Relay (RY13) CN100 1.Bank OK (RY13) 1 2 Bank Between pin1 and pin2(RY13) Color of LED RY13 RY13 Power Battery Full ON (Short) Green NC NC Stage 8/3/2 Charging OFF (Open) Orange RY15 RY15 12 34 56 GND RTH 78 9 10 9 RC- RC+ 10 RY13 + - Battery 4.Temperature compensation CN100 Temperature sensor comes along with the charger can 1 RY13 RY13 2 be connected to the unit to allow temperature compensation Power Stage 8/3/2 of the charging voltage. NC NC If the sensor is not used, the charger still works normally. RY15 RY15 12 34 56 78 9 10 GND RTH RC- RC+ 9 10 + - Battery NTC The temperature sensor can either be attached to the battery or placed in its surrounding environment. Installation Manual Please refer to the manual of PB-600. File Name:PB-600-SPEC 2015-12-15 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-PB-600-power-supply.html h t t p: / / pow e r. sa ge r. c om