MEAN WELL PCD-60-2000B
Specifications
Manufacturer
MEAN WELL
Manufacturers Part #
PCD-60-2000B
Industry Aliases
PCD-60-2000B
Series
PCD-60
Factory Pack Quantity
1
Application
LED Power Supply
Compliance
General Safety
Cooling Method
Convection
Dimensions
5.04 x 2.36 x 1.24"
Dimming Capability
Yes
Driving Method
Constant Current
Efficiency
85%
Environmental Conditions
General Purpose
Industry
LED Lighting
Input Type
180-295 VAC
IP Rating
IP30
Mechanical Style
LED Power Supply
Number of Outputs
1
Operating Temperature
-30 to +60°C, derate linearly from 50-60°C to 50% power
Output Amps 1
2 A
Output Voltage V1 Nominal
18-30 V
Package Type
Plastic
PFC
PFC
Power
60 W
Subcategory
AC-DC Power Supply
Datasheet
Extracted Text
MEAN WELL PCD-60 SERIES 60 Watt LED Power Supply Measures: 5.04 x 2.36 x 1.24” 60W Single Output AC Dimmable LED Power Supply PCD-60 series ■ ‹ Œ �…† �‡ˆ €‰…† �Š ƒ‹† �† �ƒŒ Ž ‘ ’ �† �‹ �‰ƒ �†Ⅱ ‹“ �Ž � ” � � � IP42 SPECIFICATION MODEL PCD-60-500B PCD-60-700B PCD-60-1050B PCD-60-1400B PCD-60-1750B PCD-60-2000B PCD-60-2400B RATED CURRENT 500mA 700mA 1050mA 1400mA 1750mA 2000mA 2400mA OPERATING VOLTAGE RANGE 70 ~ 108V 50 ~ 86V 34 ~ 57V 25 ~ 43V 20 ~ 34V 18 ~ 30V 15 ~ 25V CURRENT ACCURACY ±5.0% RATED POWER 54W 60.2W 59.85W 60.2W 59.5W 60W 60W OUTPUT RIPPLE & NOISE (max.) Note.1 10.2Vp-p 5.6Vp-p 3.8Vp-p 3.4Vp-p 3.3Vp-p 2.4Vp-p 2.4Vp-p NO LOAD OUTPUT VOLTAGE (max.) 118V 100V 63V 50V 50V 35V 35V SETUP TIME 500ms / 230VAC at full load VOLTAGE RANGE 180~295VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.9/230VAC, PF>0.9/277VAC at full load (Please refer to "Power Factor Characteristic" curve) TOTAL HARMONIC DISTORTION THD< 20% when output loading≧≧ 60%(PCD-60-500B loading 65%)at 230VAC input and output loading≧75% at 277VAC input INPUT EFFICIENCY (Typ.) 87% 86% 86% 85% 85% 85% 84% AC CURRENT (Typ.) 0.6A/230VAC 0.5A/277VAC INRUSH CURRENT(Typ.) COLD START 13A (twidth=50μs measured at 50% Ipeak) at 230VAC MAX. No. of PSUs on 16A 32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.5mA / 240VAC SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed. PROTECTION OVER TEMPERATURE Shut down o/p voltage, auto-recovery -30 ~ +45℃ (Refer to "Derating Curve") WORKING TEMP. 20 ~ 95% RH non-condensing WORKING HUMIDITY -40 ~ +80℃, 10 ~ 95% RH ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT ±℃ 0.03%/ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS ENEC EN61347-1, EN61347-2-13 independent, EN62384, IP42 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH EMC EMC EMISSION Compliance to EN55015, EN61000-3-2 Class C ; EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level(Surge 2KV), criteria B EMC IMMUNITY MTBF 358.030Khrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 128*60*31.5mm (L*W*H) 0.35Kg;30pcs/11.5Kg/0.58CUFT PACKING NOTE € ‚ ƒ „ File Name:PCD-60-SPEC 2015-08-21 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-PCD-60-power-supply.html h t t p: / / pow e r. sa ge r. c om MEAN WELL PCD-60 SERIES 60 Watt LED Power Supply Measures: 5.04 x 2.36 x 1.24” 60W Single Output AC Dimmable LED Power Supply PCD-60 series Mechanical Specification Case No.:PCD40A Unit:mm 3 128 150±10 UL1430 18AWG V+(RED) V-(BLACK) 7.3 7.3 75±5 T case 2 AC/N(BLUE) H03VVH2-F 0.75mm X2C 10 AC/L(BROWN) 3 ※ T case: Max. Case Temperature. Block Diagram fosc :60KHz(230VAC) EMI FILTER RECTIFIERS POWER +V I/P & & SWITCHING -V RECTIFIERS FILTER DETECTION CIRCUIT O.L.P. PWM & PFC CONTROL O.C.P. Derating Curve Static Characteristics 100 100 90 80 80 70 60 50 60 40 50 20 40 (HORIZONTAL) -30 -25 -5 0 15 30 40 45 50 60 295 180 AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (V) File Name:PCD-60-SPEC 2015-08-21 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-PCD-60-power-supply.html h t t p: / / pow e r. sa ge r. c om 2-ψ8.9 2-ψ3.6 LOAD (%) 15.3 60 20 15.3 LOAD (%) 1.9 31.5 MEAN WELL PCD-60 SERIES 60 Watt LED Power Supply Measures: 5.04 x 2.36 x 1.24” 60W Single Output AC Dimmable LED Power Supply PCD-60 series Power Factor Characteristic Constant Current Mode 0.96 0.94 0.92 0.9 230V 0.88 277V 0.86 0.84 0.82 50% 60% 70% 80% 90% 100% (60W) LOAD EFFICIENCY vs LOAD (PCD-60-500B) PCD-60 series possess superior working efficiency that up to 87% can be reached in field applications. 100 90 80 70 60 230V 50 40 277V 30 20 10 0 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD File Name:PCD-60-SPEC 2015-08-21 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-PCD-60-power-supply.html h t t p: / / pow e r. sa ge r. c om PF EFFICIENCY (%) MEAN WELL PCD-60 SERIES 60 Watt LED Power Supply Measures: 5.04 x 2.36 x 1.24” 60W Single Output AC Dimmable LED Power Supply PCD-60 series AC Dimming Operation ◎ The following diagram depicts a typical installation utilizing the PCD-60 : Io 0A TRIAC Based Dimmer MW PCD-60 Under direct driving, the power supply will work in "constant current mode (CC)" and output voltage of the power supply will be clamped by sum of forward voltage (VF) of the LED strip. ◎ Dimmer Compatibility Chart Manufacturer Dimmer Model LUTRON SKYLARK SF-12P-277 (277VAC / 60Hz) LUTRON DVF-103P-277 (277VAC / 60Hz) JUNG Licht-Management 225 TDE (230VAC / 50Hz) JUNG Licht-Management 225 NV DE (230VAC / 50Hz) BERKER Tronic-Drehdimmer 286710 (230-240VAC / 50Hz) CLIPSAL 32E450UDM (220-240VAC / 50Hz) CLIPSAL NO 32E450TM (220-240VAC / 50Hz) CLIPSAL NO 32E450LM (220-240VAC / 50Hz) CLIPSAL Cat 400T (230-240VAC / 50Hz) Conduction angle: 30 degrees(min.) / 180 degrees(max.) File Name:PCD-60-SPEC 2015-08-21 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-PCD-60-power-supply.html h t t p: / / pow e r. sa ge r. c om
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the PCD-60-2000B?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Manufacturers







What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods