MEAN WELL PLD-60-2000B

MEAN WELL PLD-60 SERIES 60 Watt LED Power Supply 60W Single Output LED Power Supply PLD-60 series Measures: 5.04 x 2.36 x 1.24”” ■ † ˆ �…   ƒ†‡  �‡   �ƒˆ ‰  Š ‹   �‡      �†    �Œƒ
  �‡Ⅱ    †Ž �‰    � ‘     �  �  �­       IP42 SPECIFICATION MODEL PLD-60-500B PLD-60-700B PLD-60-1050B PLD-60-1400B PLD-60-1750B PLD-60-2000B PLD-60-2400B RATED CURRENT 500mA 700mA 1050mA 1400mA 1750mA 2000mA 2400mA OPERATING VOLTAGE RANGE 70 ~ 108V 50 ~ 86V 34 ~ 57V 25 ~ 43V 20 ~ 34V 18 ~ 30V 15 ~ 25V CURRENT ACCURACY ±5.0% OUTPUT RATED POWER 54W 60.2W 59.85W 60.2W 59.5W 60W 60W RIPPLE & NOISE (max.) Note.1 10.2Vp-p 5.6Vp-p 3.8Vp-p 3.4Vp-p 3.3Vp-p 2.4Vp-p 2.4Vp-p NO LOAD OUTPUT VOLTAGE (max.) 118V 100V 63V 50V 50V 35V 35V SETUP TIME 500ms / 230VAC at full load VOLTAGE RANGE 180~295VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.9/230VAC, PF>0.9/277VAC at full load (Please refer to "Power Factor Characteristic" curve) TOTAL HARMONIC DISTORTION THD< 20% when output loading≧60%(PLD-60-500B loading≧65%)at 230VAC input and output loading≧75% at 277VAC input INPUT EFFICIENCY (Typ.) 88% 87% 87% 86% 86% 86% 85% AC CURRENT (Typ.) 0.6A/230VAC 0.5A/277VAC INRUSH CURRENT(Typ.) COLD START 25A (twidth=60μs measured at 50% Ipeak) at 230VAC MAX. No. of PSUs on 16A 32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.5mA / 240VAC SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed. PROTECTION OVER TEMPERATURE Shut down o/p voltage, auto-recovery -30 ~ +45℃ (Refer to "Derating Curve") WORKING TEMP. 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80℃, 10 ~ 95% RH TEMP. COEFFICIENT ±℃ 0.03%/ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS ENEC EN61347-1, EN61347-2-13 independent, EN62384, IP42 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH EMC EMC EMISSION Compliance to EN55015, EN61000-3-2 Class C ; EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level(Surge 2KV), criteria B EMC IMMUNITY MTBF 458.852Khrs min. MIL-HDBK-217F (25℃) 128*60*31.5mm (L*W*H) OTHERS DIMENSION 0.34Kg;30pcs/11.2Kg/0.58CUFT PACKING                      
   NOTE                 ­ €   ‚    ƒ    „                  File Name:PLD-60-SPEC 2015-08-21 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-PLD-60-power-supply.html h t t p: / / pow e r. sa ge r. c om MEAN WELL PLD-60 SERIES 60 Watt LED Power Supply 60W Single Output LED Power Supply PLD-60 series Measures: 5.04 x 2.36 x 1.24”” Mechanical Specification Case No. Unit:mm 3 128 150±10 UL1430 18AWG V+(RED) V-(BLACK) 7.3 7.3 75±5 T case 2 AC/N(BLUE) H03VVH2-F 0.75mm X2C 10 AC/L(BROWN) 3 ※ T case: Max. Case Temperature. Block Diagram fosc :60KHz(230VAC) RECTIFIERS EMI FILTER POWER +V I/P & & SWITCHING -V RECTIFIERS FILTER DETECTION CIRCUIT O.L.P. PWM & PFC CONTROL O.C.P. Derating Curve Static Characteristics 100 100 90 80 80 70 60 50 60 40 50 20 40 -30 -25 -5 0 15 30 40 45 50 60 (HORIZONTAL) 180 295 AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (V) File Name:PLD-60-SPEC 2015-08-21 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-PLD-60-power-supply.html h t t p: / / pow e r. sa ge r. c om 2-ψ8.9 2-ψ3.6 LOAD (%) 15.3 60 20 15.3 1.9 LOAD (%) 31.5 MEAN WELL PLD-60 SERIES 60 Watt LED Power Supply 60W Single Output LED Power Supply PLD-60 series Measures: 5.04 x 2.36 x 1.24”” Power Factor Characteristic Constant Current Mode 0.96 0.94 0.92 0.9 230V 0.88 277V 0.86 0.84 0.82 50% 60% 70% 80% 90% 100% (60W) LOAD EFFICIENCY vs LOAD (PLD-60-500B) PLD-60 series possess superior working efficiency that up to 88% can be reached in field applications. 100 90 80 70 60 230V 50 40 277V 30 20 10 0 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD File Name:PLD-60-SPEC 2015-08-21 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-PLD-60-power-supply.html h t t p: / / pow e r. sa ge r. c om EFFICIENCY (%) PF