MEAN WELL PLP-30-48

MEAN WELL PLP-30 SERIES 30 Watt LED Power Supply 30W Single Output LED Power Supply P L P -30 seri e s Measures: 4.00 x 2.00 x 1.05” ■ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ Bauartgepruft Sicherheit egelma ge od o s bewac g www.tuv.com   ID 2000000000 SPECIFICATION MODEL PLP-30-12 PLP-30-24 PLP-30-48 DC VOLTAGE 12V 24V 48V CONSTANT CURRENT REGION Note.5 9 ~ 12V 18 ~ 24V 36 ~ 48V RATED CURRENT 2.5A 1.3A 0.63A CURRENT RANGE 0 ~ 2.5A 0 ~ 1.3A 0 ~ 0.63A RATED POWER 30W 31.2W 30.24W OUTPUT RIPPLE & NOISE (max.) Note.2 2Vp-p 2.4Vp-p 4.8Vp-p CURRENT ADJ. RANGE 1.875 ~ 2.5A 0.975 ~ 1.3A 0.475 ~ 0.63A VOLTAGE TOLERANCE Note.3 ±10% LINE REGULATION ±3.0% LOAD REGULATION ±5.0% SETUP TIME 500ms / 230VAC 1200ms / 115VAC at full load VOLTAGE RANGE Note.4 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.9 at 75 ~ 100% load , 115VAC / 230VAC TOTAL HARMONIC DISTORTION THD< 20% when output loading≥60% at 115VAC/230VAC input INPUT EFFICIENCY (Typ.) 83% 85.5% 86.5% AC CURRENT (Typ.) 0.4A/115VAC 0.2A/230VAC INRUSH CURRENT (max.) COLD START 25A(twidth=45 s measured at 50% Ipeak) at 230VAC μ MAX.No. of PSUs on 16A 64units (circuit breaker of type B) / 64 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 240VAC 100 ~ 110% OVER CURRENT Note.5 Protection type : Constant current limiting, recovers automatically after fault condition is removed PROTECTION SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed. 15 ~ 18V 28 ~ 33V 57 ~ 63V OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover -30 ~ +70℃ (Refer to "Derating Curve") WORKING TEMP. 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80℃, 10 ~ 95% RH TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS UL8750, TUV EN61347-1, EN61347-2-13, CSA C22.2 No. 250.0-08(except for 48V) approved ; design refer to UL60950-1 WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC SAFETY & I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH ISOLATION RESISTANCE EMC EMC EMISSION Compliance to EN55015, EN61000-3-2 Class C(≧75% load); EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024,EN61547, light industry level, criteria A EMC IMMUNITY MTBF 580.8K hrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 101.6*50.8*26.6mm (L*W*H) 0.12Kg; 108pcs/13Kg/0.89CUFT PACKING ℃ NOTE              File Name:PLP-30-SPEC 2016-01-11 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-PLP-30-power-supply.html h t t p: / / pow e r. sa ge r. c om 4-ψ3.2 MEAN WELL PLP-30 SERIES 30 Watt LED Power Supply 30W Single Output LED Power Supply PL P-30 se ri e s Measures: 4.00 x 2.00 x 1.05” Mechanical Specification Unit:mm 101.6 3.175 95.25 AC FUSE HS2 FS1 T1A /250V M2 1 2 3 CN1 CN2 1 2 SVR1 M3 M1 HS1 1.HS1,HS2 cannot be shorted. 2.HS1 must have safety isolation distance with system case. 3.M1 is safety ground. For better EMC performance,Please secure an electrical connection between M1,M2,M3,and chassis grounding. AC Input Connector (CN1) : JST B3P-VH or equivalent DC Output Connector (CN2) : JST B2P-VH or equivalent Pin No. Assignment Mating Housing Terminal Pin No. Assignment Mating Housing Terminal 1 AC/L 1 +V JST VHR JST SVH-21T-P1.1 JST VHR JST SVH-21T-P1.1 2 No Pin 2 -V or equivalent or equivalent or equivalent or equivalent 3 AC/N : Grounding Required Block Diagram fosc : 90KHz(115VAC) 120KHz(230VAC) EMI FILTER RECTIFIERS +V POWER I/P & & SWITCHING -V RECTIFIERS FILTER DETECTION CIRCUIT FG O.L.P. PWM & PFC CONTROL O.C.P. O.V.P. Derating Curve Static Characteristics 100 100 90 80 80 70 60 50 60 40 50 20 40 -30 -25 -5 0 20 40 50 60 70 (HORIZONTAL) 90 100 125 135 145 155 165 175 180 200 230 264 AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (V) 60Hz File Name:PLP-30-SPEC 2016-01-11 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-PLP-30-power-supply.html h t t p: / / pow e r. sa ge r. c om LOAD (%) . 50.8 3max. 26.6 . 3.175 44.45 LOAD (%) MEAN WELL PLP-30 SERIES 30 Watt LED Power Supply 30W Single Output LED Power Supply PL P-30 se ri e s Measures: 4.00 x 2.00 x 1.05” Power Factor Characteristic Constant Current Mode 1.00 0.98 0.96 0.94 0.92 0.90 230V 0.88 115V 0.86 0.84 0.82 0.80 0.78 50% 60% 70% 80% 90% 100% (30W) LOAD EFFICIENCY vs LOAD (48V Model) PLP-30 series possess superior working efficiency that up to 86.5% can be reached in field applications. 90 88 86 84 82 80 78 76 74 72 70 230V 68 66 115V 64 62 60 58 56 54 52 50 48 46 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD DRIVING METHODS OF LED MODULE This LED power supply is suggested to work in constant current mode area (CC) to drive the LEDs. In the constant current region, the highest voltage at the output of the driver وﮭ ﮭ depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL. Constant Current area 75 (min.) Hiccup Protection 50 100 Io (%) Typical LED power supply I-V curve File Name:PLP-30-SPEC 2016-01-11 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-PLP-30-power-supply.html h t t p: / / pow e r. sa ge r. c om PF EFFICIENCY (%) IJo(%)