Name: MEAN WELL PSC-35A
Brand: MEAN WELL
SKU: PSC-35A

Description

35.88 W, Double Output, 13.8 VDC@1.7 A | 13.8 VDC@0.9 A Open Frame AC-DC Power Supply

Part Number

PSC-35A

Price

Request Quote

Manufacturer

MEAN WELL

Lead Time

Request Quote

Category

Circuit Protection » AC-DC Power Supply

Specifications

Manufacturer

MEAN WELL

Manufacturers Part #

PSC-35A

Series

PSC-35

Factory Pack Quantity

Cooling Method

Convection

Dimensions

3.33 x 2.00 x 0.94"

Efficiency

84%

Isolation

3000 VAC

Mechanical Style

Open / Enclosed Frame

Mounting

PCB

Number of Outputs

Operating Temperature

- 30 to + 70°C

Output Amps 1

1.7 A

Output Amps 2

0.9 A

Output Voltage V1 Nominal

13.8 VDC

Output Voltage V2 Nominal

13.8 VDC

Package Type

Open Frame

Power

35.88 W

Subcategory

AC-DC Power Supply

Datasheet

PSC-35-SPEC.pdf

157 KiB

Download

Extracted Text

35W Single Output with Battery Charger(UPS Function) PSC-35 series Bauartgepruft Sicherheit egelma ge od os be wac g www.tuv.com ID 2000000000 ■ �� ■ �� ‧�� ‧��!�"�� ‧�� ‧#$#%&’%��(� ‧�� ‧)�� *��+�� ‧�� ,��#-&��.�&/�.�0 ‧�� ‧��!��!�� ‧�� ‧�� !�� +��1�� ‧��1��2�� ‧��+��1�� ‧3445�1��+�� ‧’�� ■ �� #-��#-6��!7�� .�� +�� 849�� ’:;9��+��"��1��$�<��.��.� ��.��+��$ ��#-��11��=:5>�� #4℃℃ ��?4 $�@�� 1��.��2��+�� >��.�� . ��1��$��#-��+��,#$#%�&�’%0�� *��$ ■ �� { �� File Name:PSC-35-SPEC 2018-01-12 35W Single Output with Battery Charger(UPS Function) PSC-35 series ��#-� �� /��.� /��.��>� �>��/�� /��. ��.��/�� /�� SPECIFICATION MODEL PSC-35A PSC-35B OUTPUT NUMBER CH1 CH2 CH1 CH2 DC VOLTAGE 13.8V 13.8V 27.6V 27.6V RATED CURRENT 1.7A 0.9A 0.85A 0.45A CURRENT RANGE 0 ~ 2.6A -------- 0 ~ 1.3A -------- RATED POWER 35.88W 35.88W RIPPLE & NOISE (max.) Note.2 120mVp-p -------- 240mVp-p -------- OUTPUT VOLTAGE ADJ. RANGE CH1: 12 ~ 15V CH1: 24 ~ 29V VOLTAGE TOLERANCE Note.3 ±1.0% -------- ±1.0% -------- LINE REGULATION ±0.5% -------- ±0.5% -------- LOAD REGULATION ±0.5% -------- ±0.5% -------- SETUP, RISE TIME Note.4 800ms, 50ms/230VAC 1600ms, 50ms/115VAC at full load HOLD UP TIME (Typ.) 50ms/230VAC 10ms/115VAC at full load VOLTAGE RANGE 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz 86% EFFICIENCY (Typ.) 84% INPUT AC CURRENT (Typ.) 0.75A/115VAC 0.5A/230VAC INRUSH CURRENT (Typ.) COLD START 20A/115VAC 40A/230VAC LEAKAGE CURRENT <1mA / 240VAC 105 ~ 150% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION CH1:14.49 ~ 19.5V CH1:28.98 ~ 39.5V OVER VOLTAGE Protection type : Shut down O/P Voltage, repower on to recover BATTERY CUT OFF 10±0.5V 20±1V TTL open collector output, ON : AC OK ; OFF : AC Fail ; Ice : max. 30mA@ 50VDC AC OK FUNCTION TTL open collector output, ON : Battery Low ; OFF : Battery OK ; Ice : max. 30mA@ 50VDC BATTERY LOW Battery low voltage : < 11V Battery low voltage : < 22V -30 ~ +70℃ (Refer to "Derating Curve") WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -20 ~ +85℃, 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT ±℃ 0.03%/ (0~50℃) on CH1 output VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1, EAC TP TC 004 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC SAFETY & EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH (Note 4) Compliance to EN55032 (CISPR32) Class B, EN61000-3-2,-3, EAC TP TC 020 EMC EMISSION EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A, EAC TP TC 020 MTBF 658.4 K hrs min. MIL-HDBK-217F (25℃) PCB:84.6*50.8*24mm (L*W*H) ; Enclosed type:86.4*59.6*30mm (L*W*H) OTHERS DIMENSION PACKING PCB:0.092Kg;90pcs/9.28Kg/0.97CUFT ; Enclosed type: 0.145Kg;100pcs/15.5Kg/1.03CUFT 3$��A�@��’#49��.��’-℃��1��+��$ NOTE ’$�B��C��’4)D(��1�+�� +��3’%�� 4$3�1�C�;?�1��$ #$�@��.��$ ;$�*��1��1��$�@��A!�""�� 1��$ -$�D��D�3.D�’��+��$ :$�D��D�3��1�� $ ?$�@�� +��1��E��$�@��1��E��+��1�� )��$�"�� 1��)��.��1��F�)<��1�� $G ��,��+��!! $�� $��0 =$��@��+��1�#$-℃℃ !3444�� 1��1�- !3444�� 1��1�� ’444�,:-441�0$ File Name:PSC-35-SPEC 2018-01-12 35W Single Output with Battery Charger(UPS Function) PSC-35 series Block Diagram AC OK ALARM Bat. Low CIRCUIT RECTIFIERS RECTIFIERS POWER +V EMI I/P & & SWITCHING FILTER -V FILTER FILTER Bat. + Bat. - DETECTION FG CIRCUIT Battery Charger O.L.P. CONTROL & O.V.P. Back Up Control Output Derating Output Derating VS Input Voltage 100 100 PCB only 90 80 Enclosed type 80 60 70 60 40 50 20 40 -30 0 10 20 30 40 45 50 60 70 (HORIZONTAL) 90 95 100 115 120 140 160 180 200 220 240 264 AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (VAC) 60Hz Suggested Application 1.Backup connection for AC interruption (1) Please refer to the Fig1.1 for suggested connection. The power supply charges the battery and provides energy to the load at the same time when the AC main is OK. The battery starts to supply power to the load when the AC mains fails. A : 12V - B : 24V + Battery Bat- Bat+ +V + Load -V - Fig 1.1 Suggested system connection File Name:PSC-35-SPEC 2018-01-12 LOAD (%) LOAD (%) 86.38 2-M3 L=4 23.28 37.6 2-M3 6 2-M3 L=4 74.38 35W Single Output with Battery Charger(UPS Function) PSC-35 series 2.Alarm Signal for AC OK and Battery Low (1) Alarm Signal is sent out through " AC OK " & " Battery Low " pins. (2) An external voltage source is required for this function. The maximum applied voltage is 50V and the maximum sink current is 30mA. (3) Table2.1 explains the alarm function built in the power supply AC OK (Battery low) Function Description Output of alarm Low The signal is "Low" when the power supply turns on (0.3V max. at 30mA) AC OK R The signal turns to be "High" when the power High or open(External applied V supply turns OFF voltage 50V max.) The signal is "Low" when the voltage of Low (0.3V max. at 30mA) Battery battery is under A:11V, B:22V Low High or open(External applied The signal is "High" when the voltage of Pin6 DC output com External voltage and R voltage 50V max.) battery is above A:11V, B:22V (The max. Sink is 30mA and 50V) Table 2.1 Explanation of Alarm Signal Fig 2.2 Internal circuit of AC OK (Battery Low) Unit:mm Mechanical Specification Cover: No.235A-T 84.6 77.8 3.175 AC FUSE T2.0A/250V FS1 SVR1 3 1 2 2 1 FS100 3 T4A/250V CN1 4 5 HS1 6 CN2 4-ψ3.3 Mylar film 3$D�3.D�’��+��$ ’$D�3��1�� $ #$��H��E�� 4. -V and Bat- can not be shorted AC Input Connector (CN1) : JST B3P-VH or equivalent Pin No. Assignment Mating Housing Terminal 1 AC/N JST VHR JST SVH-21T-P1.1 2 No Pin or equivalent or equivalent 3 AC/L DC Output Connector (CN2) : JST B6P-VH or equivalent Pin No. Assignment Pin No. Assignment Mating Housing Terminal 1 Bat. Low 4 Battery + JST VHR JST SVH-21T-P1.1 2 AC OK 5 +V or equivalent or equivalent 36 Battery - -V L-Bracket: Installation Manual 235A-D Please refer to : http://www.meanwell.com/manual.html File Name:PSC-35-SPEC 2018-01-12 27.06 59.6 50.8 3 max. 24 44.45 3.175 15 30

Frequently asked questions

Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

MEAN WELL PSC-35A

Why buy from GID?

What they say about us

Related Products