MEAN WELL PSC-60B-C

MEAN WELL PSC-60 SERIES 60 Watt Battery Charger Power Supply 60W Single Output with Battery Charger(UPS Function) PSC-60 series Measures: 5.00 x 3.00 x 1.22” ■ � �      �  �  
 � �
 �
  �­  Bauart gepruft Sicherheit egelma ge od os be wac g www.tuv.com ID 2000000000 SPECIFICATION  ”   Ÿ“† ¡“Ÿ† Ÿ– MODEL PSC-60A PSC-60B OUTPUT NUMBER CH1 CH2 CH1 CH2 DC VOLTAGE 13.8V 13.8V 27.6V 27.6V RATED CURRENT 2.8A 1.5A 1.4A 0.75A CURRENT RANGE 0 ~ 4.3A -------- 0 ~ 2.15A -------- RATED POWER 59.34W 59.34W RIPPLE & NOISE (max.) Note.2 120mVp-p -------- 240mVp-p -------- OUTPUT VOLTAGE ADJ. RANGE CH1: 12 ~ 15V CH1: 24 ~ 29V VOLTAGE TOLERANCE Note.3 ±1.0% -------- ±1.0% -------- LINE REGULATION ±0.5% -------- ±0.5% -------- LOAD REGULATION ±0.5% -------- ±0.5% -------- SETUP, RISE TIME Note.4 800ms, 50ms/230VAC 1600ms, 50ms/115VAC at full load HOLD UP TIME (Typ.) 50ms/230VAC 10ms/115VAC at full load VOLTAGE RANGE 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz 84% EFFICIENCY (Typ.) 84% INPUT AC CURRENT (Typ.) 1.6A/115VAC 1A/230VAC INRUSH CURRENT (Typ.) COLD START 30A/115VAC 60A/230VAC LEAKAGE CURRENT <1mA / 240VAC 105 ~ 150% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION CH1:14.49 ~ 18.63V CH1:28.98 ~ 37.26V OVER VOLTAGE Protection type : Hiccup mode, recovers automatically after fault condition is removed 10.5±0.5V 21±1V BATTERY CUT OFF TTL open collector output, ON : AC OK ; OFF : AC Fail ; Ice : max. 30mA@ 50VDC AC OK FUNCTION TTL open collector output, ON : Battery Low ; OFF : Battery OK ; Ice : max. 30mA@ 50VDC BATTERY LOW Battery low voltage : < 11V Battery low voltage : < 22V -20 ~ +70℃ (Refer to "Derating Curve") WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85℃, 10 ~ 95% RH TEMP. COEFFICIENT ±0.03%/℃℃ (0~50 ) on CH1 output VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH (Note 7) EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A EMC IMMUNITY MTBF 589.7K hrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION PCB:101.6*50.8*29mm (L*W*H) ; Enclosed type:103.4*62*37mm (L*W*H) PACKING PCB:0.13Kg; 96pcs/13.5Kg/0.89CUFT ; Enclosed type:0.29Kg; 45pcs/14Kg/0.67CUFT €‚ƒ­„…†­‡ 
 ℃ € NOTE ­€ˆ‰­ Š‹
  
­Œ      €‰Ž‘ € „€ƒ†€ Ž€’ €ƒ‚    € ‡€Š“Š†Š­
 € ”€Š“Š   € ‘€ƒ     
 •€ – 
—
  „”˜ „”    “€ƒ •
  – €     – †™– š €›œ
  € €ž File Name:PSC-60-SPEC 2015-08-06 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-PSC-60-power-supply.html h t t p: / / pow e r. sa ge r. c om 103.4 2-M3 L=4 24.2 55 4.2 2-M3 12.7 2-M3 L=4 95 2-ψ3.5 78 MEAN WELL PSC-60 SERIES 60 Watt Battery Charger Power Supply 60W Single Output with Battery Charger(UPS Function) PSC-60 series Measures: 5.00 x 3.00 x 1.22” Mechanical Mechanical Specification Specification Unit:mm Unit:mm 101.6 Cover: 95.25 3.175 No.998A -T M2 HS2 FS1 AC FUSE SVR1 T2.5A/250V 3 1 2 2 1 3 CN1 4 5 6 CN2 M1 HS1 4-ψ3.3 Mylar film          
     AC Input Connector (CN1) : JST B3P-VH or equivalent Pin No. Assignment Mating Housing Terminal L-Bracket: 1 AC/N No.998A -D JST VHR JST SVH-21T-P1.1 2 No Pin or equivalent or equivalent 3 AC/L DC Output Connector (CN2) : JST B6P-VH or equivalent Pin No. Assignment Pin No. Assignment Mating Housing Terminal 1 Bat. Low 4 Battery + JST VHR JST SVH-21T-P1.1 2 AC OK 5 DC Output + or equivalent or equivalent 36 Battery - DC Output COM : Grounding Required Block Diagram AC OK ALARM Bat. Low CIRCUIT RECTIFIERS RECTIFIERS POWER +V EMI I/P & & SWITCHING FILTER -V FILTER FILTER Bat. + Bat. - DETECTION FG CIRCUIT Battery Charger O.L.P. CONTROL & O.V.P. Back Up Control File Name:PSC-60-SPEC 2015-08-06 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-PSC-60-power-supply.html h t t p: / / pow e r. sa ge r. c om 30.85 62 50.8 3 max. 29 44.45 3.175 18 14.5 37 MEAN WELL PSC-60 SERIES 60 Watt Battery Charger Power Supply 60W Single Output with Battery Charger(UPS Function) PSC-60 series Measures: 5.00 x 3.00 x 1.22” Output Derating Output Derating VS Input Voltage 100 100 PCB only 90 80 80 Enclosed tpye 60 70 60 40 50 20 40 (HORIZONTAL) -20 0 10 20 30 35 40 50 60 70 90 95 100 115 120 140 160 180 200 220 240 264 AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (VAC) 60Hz Suggested Application 1.Backup connection for AC interruption (1) Please refer to the Fig1.1 for suggested connection. The power supply charges the battery and provides energy to the load at the same time when the AC main is OK. The battery starts to supply power to the load when the AC mains fails. A : 12V - B : 24V + Battery Bat- Bat+ + DC+ Load - DC- Fig 1.1 Suggested system connection 2.Alarm Signal for AC OK and Battery Low (1) Alarm Signal is sent out through " AC OK " & " Battery Low " pins. (2) An external voltage source is required for this function. The maximum applied voltage is 50V and the maximum sink current is 30mA. (3) Table2.1 explains the alarm function built in the power supply AC OK (Battery low) Function Description Output of alarm Low The signal is "Low" when the power supply (0.3V max. at 30mA) turns on AC OK R The signal turns to be "High" when the power High or open(External applied V supply turns OFF voltage 50V max.) The signal is "Low" when the voltage of Low Battery battery is under A:11V, B:22V (0.3V max. at 30mA) Low High or open(External applied The signal is "High" when the voltage of Pin6 DC output com External voltage and R voltage 50V max.) battery is above A:11V, B:22V (The max. Sink is 30mA and 50V) Table 2.1 Explanation of Alarm Signal Fig 2.2 Internal circuit of AC OK (Battery Low) File Name:PSC-60-SPEC 2015-08-06 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-PSC-60-power-supply.html h t t p: / / pow e r. sa ge r. c om LOAD (%) LOAD (%)