Name: MEAN WELL RCP-1600-12
Brand: MEAN WELL
SKU: RCP-1600-12

Description

RACK MOUNT POWER SUPPLIES 1500W 12V 125A FRONT END RECTIFIER

Part Number

RCP-1600-12

Price

Request Quote

Manufacturer

MEAN WELL

Lead Time

Request Quote

Category

Circuit Protection » AC-DC Power Supply

Specifications

Manufacturer

MEAN WELL

Manufacturers Part #

RCP-1600-12

Industry Aliases

RCP-1600-12

Series

RCP-1600

Factory Pack Quantity

Cooling Method

Air-Cooled

Dimensions

11.81 x 3.35 x 1.61"

Efficiency

88.50%

Isolation

3000 VAC

Mechanical Style

Hot-Swap

Mounting

Rack Mount

Operating Temperature

- 30 to + 70°C

Output Amps 1

125 A

Power

1500 W

Subcategory

AC-DC Power Supply

Datasheet

RCP-1600-SPEC.pdf

195 KiB

Download

Extracted Text

1600W Rack Mountable Front End Rectifier RCP-1600 series �� A C � C 9 Bauart gepruft Sicherheit 0"" C >* C . 8 (: �� egelma ge od os be wac g www.tuv.com ID 2000000000 #> C 0#0* C #! 8 (: �� ■ �� ■ �� ‧(��’��;�� ‧@�&��?�(A��7��!",*"� ‧�5�?��7�**"0)��**"). ��8��0""/’��&��*��: ‧6��;��&�� ‧9��&&��,0<� ‧;��&�� ‧=�� ‧6��=��;�+1��8��: ■ �� ‧’��>"""��&�� ,”��%��& ‧�� ) ‧6�� &��1��56�� ‧�� 8=��’76��: ‧�� ‧��?�@��=��=�� ‧�� =�� ‧�� ‧=��&�� ‧�� ‧*�� ■ �� !""�� #!$��%��&��’�� (��&�� 0 ��)*�� #�+��&��,"-)!./’��&&�� &��#�� &��&��1��%��&��2"℃#�� !""�� &��3��4��&��56��’76��1� ��1��8��)."""�� ,”��%��1��9�� (:1�� 1��3��1��1��# ■ �� !"## �� =�� =�� @�� ※�7��?� ,B��%��&1��9�� (1��# +�� 7�� 6��% �56�� @��% �’7 �’76�� 6��4�� File Name:RCP-1600-SPEC 2018-01-15 1600W Rack Mountable Front End Rectifier RCP-1600 series SPECIFICATION MODEL RCP-1600-12 RCP-1600-24 RCP-1600-48 DC VOLTAGE 12V 24V 48V RATED CURRENT 125A 67A 33.5A CURRENT RANGE 0 ~ 125A 0 ~ 67A 0 ~ 33.5A RATED POWER 1500W 1608W 1608W RIPPLE & NOISE (max.) Note.2 150mVp-p 200mVp-p 300mVp-p OUTPUT VOLTAGE ADJ. RANGE Note.6 11.5 ~ 15V 23.5 ~ 30V 47.5 ~ 58.8V VOLTAGE TOLERANCE Note.4 ±1.0% ±1.0% ±1.0% LINE REGULATION ±0.5% ±0.5% ±0.5% LOAD REGULATION ±0.5% ±0.5% ±0.5% SETUP, RISE TIME 1500ms, 60ms/230VAC at full load HOLD UP TIME (Typ.) 16ms / 230VAC at 75% load 10ms / 230VAC at full load VOLTAGE RANGE Note.5 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) 0.97/230VAC at full load EFFICIENCY (Typ.) 88.5% 91% 93% INPUT AC CURRENT (Typ.) Note.5 14A/115VAC 8A/230VAC 15A/115VAC 8.5A/230VAC INRUSH CURRENT (Typ.) COLD START 35A/230VAC LEAKAGE CURRENT <1.5mA / 230VAC 105 ~ 115% rated output power OVERLOAD Protection type : Constant current limiting, unit will shut down o/p voltage after 5 sec. re-power on to recover 15.75 ~ 18.75V 31.5 ~ 37.5V 63 ~ 75V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down OUTPUT VOLTAGE Adjustment of output voltage is allowable to 40 ~ 125% of nominal output voltage(60~125% for 12V). PROGRAMMABLE(PV) Note 6 Please refer to the Function Manual in following pages. OUTPUT CURRENT Adjustment of constant current level is allowable to 20 ~ 100% of rated current. Please refer to the Function Manual in following pages. PROGRAMMABLE(PC) Note 6 FUNCTION REMOTE ON-OFF CONTROL By electrical signal or dry contact Power ON:short Power OFF:open. Please refer to the Function Manual in following pages. Compensate voltage drop on the load wiring up to 0.5V. Please refer to the Function Manual in following pages. REMOTE SENSE 5V @ 0.3A, 12V @ 0.8A AUXILIARY POWER ALARM SIGNAL Isolated TTL signal output for T-Alarm, AC-OK and DC-OK WORKING TEMP. -30 ~ +70℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH non-condensing ENVIRONMENT TEMP. COEFFICIENT ±℃ 0.03%/ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1, EAC TP TC 004 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC (0.5KVAC for 12V) WITHSTAND VOLTAGE ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Parameter Standard Test Level / Note Conducted EN55032 (CISPR32) / EN55011 (CISPR11) Class B Radiated EN55032 (CISPR32) / EN55011 (CISPR11) Class A EMC EMISSION Harmonic Current EN61000-3-2 ----- Voltage Flicker EN61000-3-3 ----- SAFETY & EN55024 , EN61204-3, EN61000-6-2 EMC (Note 7) Parameter Standard Test Level / Note ESD EN61000-4-2 Level 3, 8KV air ; Level 2, 4KV contact Radiated EN61000-4-3 Level 3 EFT / Burst EN61000-4-4 Level 3 EMC IMMUNITY Surge EN61000-4-5 Level 4, 2KV/Line-Line 4KV/Line-Earth Conducted EN61000-4-6 Level 3 Magnetic Field EN61000-4-8 Level 4 >95% dip 0.5 periods, 30% dip 25 periods, Voltage Dips and Interruptions EN61000-4-11 >95% interruptions 250 periods MTBF 162.2K hrs min. Telcordia SR-332 (Bellcore) ; 39.3K hrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 300*85*41mm (L*W*H) 1.87Kg; 6pcs/12.2Kg/1.16CUFT PACKING #�’��7=+��)0"/’��1��)*℃��&��# NOTE )#��D��)"59E��&�� )B��"# �&�D�.2�&��# 0#�(��&��@��#��%�� *<# .#�+��?��1��# *#��#��%��&��# !#��/��&��56��’76��#�@/��&��56��’76��/��# 2#�+��&��4��#�’��5��3�� 2)"��C0!"�� &��%��#�+��&��4��&��5��#�;�� &��5��1��&��F�5��&��#G�8��?��#��#��: >#�+��&�0#*℃℃ � """��&��&�* � """��&��&��)"""�8!*""&�:# File Name:RCP-1600-SPEC 2018-01-15 1600W Rack Mountable Front End Rectifier RCP-1600 series Block Diagram PFC fosc : 90KHz PWM fosc : 70KHz +S ACTIVE ORING RECTIFIERS RECTIFIERS POWER +V EMI INRUSH I/P FET & & CURRENT FILTER SWITCHING PFC FILTER LIMITING -V -S O.V.P. ORING FET CONTROL DETECTION PFC PWM PV/PC CONTROL CIRCUIT CONTROL TRANSCEIVERS DA/DB T-Alarm DETECTION MCU MCU DATA CIRCUIT AC-OK ISOLATION DC-OK SDA/SCL O.T.P. (CANH/CANL) FAN Remote ON-OFF AUX 12V/0.8A RECTIFIERS POWER & AUX POWER FILTER 5V/0.3A Static Characteristics Derating Loads vs Input Voltage MODEL 12V 24V 48V 100 INPUT 90 1500W 1608W 1608W 180~264VAC 125A 67A 33.5A 80 1200W 1286.4W 1286.4W 70 115VAC 100A 53.6A 26.8A 60 1050W 1125.6W 1125.6W 50 100VAC 87.5A 46.9A 23.45A 40 900W 964.8W 964.8W 30 90VAC 75A 40.2A 20.1A 90 100 115 180 264 INPUT VOLTAGE (VAC) 60Hz Derating Curve Efficiency vs Load (48V Model) 94 93 100 92 91 80 90 230VAC 89 Input only 88 60 87 50 86 40 85 84 20 83 82 81 -30 -25 -10 0 15 30 50 60 70 (HORIZONTAL) 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% AMBIENT TEMPERATURE (℃) LOAD ◎ The curve above is measured at 230VAC. File Name:RCP-1600-SPEC 2018-01-15 LOAD (%) LOAD (%) EFFICIENCY (%) 1600W Rack Mountable Front End Rectifier RCP-1600 series Function Manual 1. Voltage Drop Compensation 1.1 Remote Sense ※ The Remote Sense compensates voltage drop on the load wiring up to 0.5V +V PIN30 +S LOAD PIN31 -S -V Sense lines should be twisted in pairs to minimize noise pick-up. ◎ The +S signal should be connected to the positive terminal of the load whereas -S signal to the negative terminal. 1.2 Local Sense ※�The +S,-S have to be connected to the +V(signal),-V(signal), respectively, as the following diagram, in order to get the correct output voltage if Remote Sense is not used. +V PIN29 -V(signal) LOAD PIN28 +V(signal) PIN30 +S -V PIN31 -S 2. Output Voltage Programming (or, PV / remote voltage programming / remote adjust / margin programming / dynamic voltage trim) ※ In addition to the adjustment via the built-in potentiometer, the output voltage can be trimmed to 40~125% of the nominal voltage by applying EXTERNAL VOLTAGE. PIN27 PV PIN29 -V(signal) EXTERNAL VOLTAGE (DC) Vout 100 125 80 100 Non-Linear 60 12V 40 60 20 40 V Others 40 60 80 100 125 V OUTPUT VOLTAGE (%) 0 0.4 1 4.7 5 ◎ The rated current should change with the Output Voltage Programming accordingly. EXTERNAL VOLTAGE (DC) ◎ For Remote Sense / Local Sense, please refer to “Voltage Drop Compensation” section. File Name:RCP-1600-SPEC 2018-01-15 OUTPUT VOLTAGE(%) OUTPUT CURRENT (%) 1600W Rack Mountable Front End Rectifier RCP-1600 series 3. Constant Current Level Programming (or, PC / remote current programming / dynamic current trim) ※ The constant current level can be trimmed to 20~100% of the rated current by applying EXTERNAL VOLTAGE. PIN29 -V(signal) PIN26 PC EXTERNAL VOLTAGE (DC) ◎ For Remote Sense / Local Sense, please refer to “Voltage Drop Compensation” section. Iout 110 100 Non-Linear 20 V 0.4 1 4.7 5 EXTERNALVOLTAGE(VDC) 4. Remote ON-OFF Control The power supply can be turned ON/OFF individually or along with other units by using the "Remote ON-OFF" function. switch PIN17 Remote ON-OFF Between Remote ON-OFF and +5V-AUX Power Supply Status Switch Short ON Switch Open OFF PIN13 +5V-AUX 5.PMBus Communication Interface RCP-1600 supports PMBus Rev. 1.1 with maximum 100KHz bus speed, allowing information reading, status monitoring, output trimming, etc. For details, please refer to the Function Manual. File Name:RCP-1600-SPEC 2018-01-15 OUTPUTCURRENT(%) 1600W Rack Mountable Front End Rectifier RCP-1600 series Mechanical Specification Case No.250 Unit:mm 300 9max. 41 5.8 12.5 11max. 3.6 7 CN1 Air flow SVR direction ※ LED Status Indicators LED Description Green The power supply functions normally. Red The LED will present a constant red light when the abnormal status (OTP, OLP, fan fail and charging timeout) arises. The LED will flash with the red light when the internal temperature reaches 60℃; under this condition, the unit still operates normally Red (Flashing) without entering OTP. (In the meantime, an alarm signal will be sent out through the PMBus interface.) ※ Input / Output Connector Pin No. Assignment(CN1) : Postronic PCIM34W13M400A1 13579 11 29 33 11 14 17 20 23 26 29 12 15 18 21 24 27 30 Mating Housing Postronic PCIM34W13F400A1 13 16 19 22 25 28 31 2468 10 13 31 32 34 Pin No. Function Description 1,2,3,4,6 -V Negative output terminal. 5,7,8,9,10 +V Positive output terminal. Auxiliary voltage output, 10.8~13.2V, referenced to GND-AUX (pin 12). 11 +12V-AUX The maximum load current is 0.8A. This output has the built-in "Oring diodes" and is not controlled by the Remote ON/OFF control. 12 GND-AUX Auxiliary voltage output GND. The signal return is isolated from the output terminals (+V & -V). Auxiliary voltage output, 4.5~5.5V, referenced to GND-AUX (pin 12). 13 +5V-AUX The maximum load current is 0.3A. This output has the built-in "Oring diodes" and is not controlled by the Remote ON/OFF control. SCL For PMBus model: Serial Clock used in the PMBus interface. (Note.2) 14 CANL For CANBus model: Data line used in CANBus interface. (Note.2) SDA For PMBus model: Serial Data used in the PMBus interface. (Note.2) 15 CANH For CANBus model: Data line used in CANBus interface. (Note.2) High (4.5 ~ 5.5V) : When the internal temperature exceeds the limit of temperature alarm, or when fan fails. 16 T-ALARM Low (-0.1 ~ 0.5V) : When the internal temperature is normal, and when fan normally works. The maximum sourcing current is 10mA and only for output(Note.2) Remote The unit can turn the output ON/OFF by electrical signal or dry contact between Remote ON/OFF and +5V-AUX. (Note.2) 17 ON-OFF Short (4.5 ~ 5.5V) : Power ON ; Open (0 ~ 0.5V) : Power OFF ; The maximum input voltage is 5.5V. High (4.5 ~ 5.5V) : When the Vout≦80%±5%. 18 DC-OK Low (-0.1 ~ 0.5V) : When Vout≧± 80% 5%. The maximum sourcing current is 10mA and only for output. (Note.2) High (4.5 ~ 5.5V) : When the input voltage is≧87Vrms . 19 AC-OK Low (-0.1 ~ 0.5V) : When the input voltage is≦75Vrms. The maximum sourcing current is 10mA and only for output. (Note.2) 20,21,22,23 A3,A2,A1,A0 PMBus / CANBus interface address lines. (Note.1) 24,25 DB,DA Differential digital signal for parallel control. (Note.1) 26 PC Connection for constant current level programming. (Note.1) 27 PV Connection for output voltage programming. (Note.1) Positive output voltage signal. 28 +V (Signal) It is for local sense; it cannot be connected directly to the load. Negative output voltage signal. 29 -V (Signal) It is for local sense; and certain function reference; it cannot be connected directly to the load. 30 +S Positive sensing for remote sense. 31 -S Negative sensing for remote sense. 32 FG AC Ground connection. 33 AC/L AC Line connection. 34 AC/N AC Neutral connection. Note1: Non-isolated signal, referenced to [-V(signal)]. Note2: Isolated signal, referenced to GND-AUX. File Name:RCP-1600-SPEC 2018-01-15 85 42.5 7.7 62.4 50 LED Status Indicator

Frequently asked questions

Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

MEAN WELL RCP-1600-12

Why buy from GID?

What they say about us

Related Products