MEAN WELL RCP-1UI

MEAN WELL 1000W Front End Power System RCP-1000 series RCP-1000 SERIES 1000 Watt Front End Power Supply Power Supply Measures: 11.61 x 5.00 x 1.61”  ™ Ÿ Ÿ ’ Bauart gepruft Sicherheit € ˜ Ÿ
€ž Ÿ ƒ
‰
‹Œ  egelma ge od o s be wac g www.tuv.com ID 2000000000

…‚ Ÿ ˜ Ÿ
…‚
‰
‹Œ   ■   ■    �‹ Ž �—–‹™ š ‚ ˜
�‘ Ž  �›–š˜˜€€ ˜˜€ƒ �’  Š “ �Ž   �” �‘”†‰Œ �  • 
   ”  ■    € �”   � � –—   ” ”  �   ” �     �”   � �˜ �     �   ■   

    ­€‚ƒ„…    †‚ …℃ 
‡ˆ   †  ‰Š 
 ” †
‹Œ† † ‡†† … ■   

 € ‘–—†      € –”†   { ”  ” — Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. ※š–
 œ †
‹†…– ……  Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-RCP-1000-power-supply.html File Name:RCP-1000 h t t p: -SPEC / / pow 2016- e r.01-30 sa ge r. c om MEAN WELL RCP-1000 SERIES 1000 Watt Front End Power Supply Power Supply 1000W Front End Power System RCP-1000 series Measures: 11.61 x 5.00 x 1.61” SPECIFICATION MODEL RCP-1000-12 RCP-1000-24 RCP-1000-48 DC VOLTAGE 12V 24V 48V RATED CURRENT 60A 40A 21A CURRENT RANGE 0 ~ 60A 0 ~ 40A 0 ~ 21A RATED POWER 720W 960W 1008W RIPPLE & NOISE (max.) Note.2 150mVp-p 200mVp-p 300mVp-p OUTPUT VOLTAGE ADJ. RANGE(SVR) 11.6 ~ 12.4V 23.2 ~ 24.8V 46.3 ~ 49.7V VOLTAGE TOLERANCE Note.3±1.0% ±1.0% ±1.0% LINE REGULATION ±0.5% ±0.5% ±0.5% LOAD REGULATION ±0.5% ±0.5% ±0.5% SETUP, RISE TIME 1000ms, 60ms/230VAC at full load HOLD UP TIME (Typ.) 16ms/230VAC at full load VOLTAGE RANGE Note.5 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 81% 87% 89% INPUT AC CURRENT (Typ.) 8.5A/115VAC 4.5A/230VAC 10.5A/115VAC 5.5A/230VAC 11A/115VAC 5.5A/230VAC INRUSH CURRENT (Typ.) COLD START 50A LEAKAGE CURRENT <1.1mA / 230VAC 105 ~ 125% rated output power OVERLOAD Protection type : Constant current limiting, recovers automatically after fault condition is removed 13.2 ~ 16.2V 26.4 ~ 32.4V 52.8 ~ 64.8V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down 5V @ 0.3A AUXILIARY POWER By electrical signal or dry contact ON:short OFF:open REMOTE ON-OFF CONTROL REMOTE SENSE Compensate voltage drop on the load wiring up to 0.5V FUNCTION OUTPUT VOLTAGE PROGRAMMABLE Adjustment of output voltage is allowable to 90 ~ 110% of nominal output voltage. Please refer to the Function Manual. The isolated TTL signal out, Please refer to the Installation Manual DC OK SIGNAL The isolated TTL signal out, Please refer to the Installation Manual AC OK SIGNAL OVER TEMP WARNING Logic " High" for over temperature warning, Please refer to the Installation Manual, isolated signal -20 ~ +60℃ (Refer to "Derating Curve") WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT ±℃ 0.02%/ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.7KVDC WITHSTAND VOLTAGE ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Parameter Standard Test Level / Note Conducted EN55022 (CISPR22) / EN55011 (CISPR11) Class B Radiated EN55022 (CISPR22) / EN55011 (CISPR11) Class B EMC EMISSION Harmonic Current EN61000-3-2 ----- Voltage Flicker EN61000-3-3 ----- EN55024 , EN61204-3, EN61000-6-2 SAFETY & Parameter Standard Test Level / Note EMC (Note 4) ESD EN61000-4-2 Level 3, 8KV air ; Level 2, 4KV contact Radiated EN61000-4-3 Level 3 EFT / Burst EN61000-4-4 Level 3 EMC IMMUNITY Surge EN61000-4-5 Level 4, 2KV/Line-Line 4KV/Line-Earth Conducted EN61000-4-6 Level 3 Magnetic Field EN61000-4-8 Level 4 >95% dip 0.5 periods, 30% dip 25 periods, Voltage Dips and Interruptions EN61000-4-11 >95% interruptions 250 periods MTBF 274K hrs min. Telcordia SR-332 (Bellcore) ; 107.3K hrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 295*127*41mm (L*W*H) 1.93Kg; 6pcs/12.6Kg/1.04CUFT PACKING         ℃
   NOTE    
  
  ­ € ‚   ƒ„   …     ­   ­   ƒ        
    †   ‡
 ˆ 
  ­    „ ‰Œ  Š   †   
‚  ‡‹ Ž­      ‡‘‡’ ­   “”‹
  …•• – — ­
    ‹­˜ Š  ­ ‹ File Name:RCP-1000-SPEC 2016-01-30 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-RCP-1000-power-supply.html h t t p: / / pow e r. sa ge r. c om MEAN WELL RCP-1000 SERIES 1000 Watt Front End Power Supply Power Supply 1000W Front End Power System RCP-1000 series Measures: 11.61 x 5.00 x 1.61” Block Diagram PFC fosc : 110KHz PWM fosc : 90KHz +S ACTIVE POWER RECTIFIERS RECTIFIERS EMI +V INRUSH ORING I/P & SWITCH- & CURRENT FILTER DIODE -V PFC ING FILTER LIMITING -S CURRENT O.L.P. CURRENT SHARE SHARE DETECTION PFC PWM CIRCUIT CONTROL CONTROL V_TRIM 2 2 I C FUNCTION O.V.P. I C OPTIONAL RECTIFIERS REMOTE CONTROL ON-OFF ON/OFF AC_OK DETECTION DC_OK CIRCUIT T_ALARM FAN AUX AUX POWER RECTIFIERS POWER (5V/0.3A) & FILTER AUX GND Static Characteristics 100 MODEL 12V 24V 48V INPUT 90 720W 960W 1008W 180~264VAC 60A 40A 21A 80 720W 960W 1008W 115VAC 70 60A 40A 21A 60 720W 960W 1008W 100VAC 60A 40A 21A 50 648W 864W 907.2W 90VAC 40 54A 36A 18.9A 90 95 100 115 264 INPUT VOLTAGE (VAC) 60Hz Efficiency vs Load (48V Model) Derating Curve 95 100 90 85 80 80 60 75 40 70 20 65 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% -20 0 10 20 30 40 50 60 70 LOAD AMBIENT TEMPERATURE (℃) ◎ The curve above is measured at 230VAC. File Name:RCP-1000-SPEC 2016-01-30 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-RCP-1000-power-supply.html h t t p: / / pow e r. sa ge r. c om LOAD (%) LOAD (%) EFFICIENCY (%) MEAN WELL RCP-1000 SERIES 1000 Watt Front End Power Supply Power Supply 1000W Front End Power System RCP-1000 series Measures: 11.61 x 5.00 x 1.61” Function Manual 1. Voltage Drop Compensation 1.1 Remote Sense The remote sense compensates voltage drop on the load wiring up to 0.5V. +V +V 8 +S RCP-1000 9 LOAD -S -V -V Sense lines should be twisted in pairs 1.2 Local Sense ※The +S,-S have to be connected to the +V,-V, respectively, as the following diagram, in order to get the correct output voltage if Remote Sense is not used. 22 +V 20 +S RCP-1000 25 -V 21 -S 2. Remote ON/OFF Control The power supply can be turned ON/OFF together or separately by using the "Remote ON-OFF" function. Between Remote ON-OFF and -S Power Supply Status REMOTE 7 Switch Short ON ON-OFF RCP-1000 Switch Open OFF 9 -S PIN7 REMOTE ON/OFF PIN8 +S PIN9 -S File Name:RCP-1000-SPEC 2016-01-30 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-RCP-1000-power-supply.html h t t p: / / pow e r. sa ge r. c om MEAN WELL RCP-1000 SERIES 1000 Watt Front End Power Supply Power Supply 1000W Front End Power System RCP-1000 series Measures: 11.61 x 5.00 x 1.61” 3. Output Voltage Programming (or, PV / remote voltage programming / remote adjust / margin programming / dynamic voltage trim) ※ In addition to the adjustment via the built-in potentiometer, the output voltage can be trimmed to 90~110% of the nominal voltage by applying EXTERNAL RESISTANCE. +V PIN8 +S 8 PIN 13 V-TRIM +S PIN9 -S R1 13 V-TRIM RCP-1000 LOAD R2 9 -S -V ◎ +S & +V, -S & -V also need to be connected on CN501 3.1 RCP-1000-12 Vout (%) Vout (%) 100 110 98 108 96 106 94 104 92 102 90 100 R1 (Ω) R2 (Ω) 180K 240K 350K 560K 1.2M NC min. 0.1W NC 300K 120K 62K 31K 13K min. 0.1W 3.2 RCP-1000-24 Vout (%) Vout (%) 100 110 98 108 96 106 94 104 92 102 90 100 R1 (Ω) R2 (Ω) 560K 750K 1M 1.6M 3.3M NC min. 0.1W NC 330K 130K 62K 30K 10K min. 0.1W 3.3 RCP-1000-48 Vout (%) Vout (%) 100 110 98 108 96 106 94 104 92 102 90 100 R1 (Ω) R2 (Ω) 1.3M 1.7M 2.4M 3.6M 7.6M NC min. 0.1W NC 345K 140K 70K 36K 15K min. 0.1W 2 4. I C Bus Interface Option  ※For the details of I C option, please refer to the Installation Manual. File Name:RCP-1000-SPEC 2016-01-30 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-RCP-1000-power-supply.html h t t p: / / pow e r. sa ge r. c om 46 MEAN WELL RCP-1000 SERIES 1000 Watt Front End Power Supply Power Supply 1000W Front End Power System RCP-1000 series Measures: 11.61 x 5.00 x 1.61” Mechanical Specification Case No. 952A Unit:mm 295 41 7.1 12.5 24 5 max. SVR CN501 Air flow direction ※ LED Status Indicators & Corresponding Signal at Function Pins Function LED * Signal PSU Output Description AC-OK ON When input voltage≧± 82V 4V 0 ~ 0.5V ON AC-NG OFF 4.5 ~ 5.5V When input voltage≦± 82V 4V OFF DC-OK ON When output voltage≧± 80% 5% of Vo rated. 0 ~ 0.5V ON DC-NG OFF When output voltage≦± 80% 5% of Vo rated. 4.5 ~ 5.5V ON T-OK ---- When the internal temperature (TSW1 & TSW2 short) is within safe limit 0 ~ 0.5V ON T-ALARM ---- When the internal temperature (TSW1 or TSW2 open) exceeds the limit of temperature alarm 4.5 ~ 5.5V OFF *Signal between function pin and "-V". ※ Input / Output Connector Pin No. Assignment(CN501) : Postronic PCIB24W9M400A1 1 3 57 10 13 16 19 23 Mating Housing Postronic PCIB24W9F400A1 2 4 6 9 12 15 18 21 22 24 Pin No. Function Description 1,2,4 +V(signal) Positive output voltage. 3,5,6 -V(signal) Negative output voltage.  7 RemoteON-OFF Each unit can separately turn the output on and off by electrical or dry contact . Short: ON, Open:OFF. 8 +S Positive sensing for Remote Sense. 9 -S Negative sensing for Remote Sense. Low : When input voltage is≧82Vrms +/-4V. 10 AC-OK (Note.1) High : When input voltage in≦82Vrms +/-4V. High : When Vout≦80%+/-5%. 11 DC-OK (Note.1) Low : When Vout≧80%+/-5% Current sharing signal. 12 CS When units are connected in parallel, the CS pins of the units should be connected to allow current balance between units. 13 V-TRIM Connection for output voltage programming. High : When the internal temperature is within safe limit. 14 T-ALARM (Note.1) Low : 10℃ below the thermal shut down limit. Auxiliary voltage output, 4.3~5.3V, referenced to GND-AUX(pin 7). 15 +5V-AUX The maximum load current is 0.3A. This output has the built-in "Oring diodes" and is not controlled by the remote ON/OFF control. Auxiliary voltage output GND. 16 GND-AUX The signal return is isolated from the output terminals (+V & -V). 17 SCL Serial clock used in the I C interface option. Refer to the Instruction Manual. (Note.1)  18 SDA Serial data used in the I C interface option. Refer to the Instruction Manual. (Note.1)  19,20,21 A0,A1,A2 I C interface address lines. Refer to the Instruction Manual. 22 FG AC Ground connection. 23 AC/L AC Line connection. 24 AC/N AC Neutral connection. Note1: Non-isolated signal, referenced to the output terminal -V. Installation Manual Please refer to the manual of RCP-1000. File Name:RCP-1000-SPEC 2016-01-30 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-RCP-1000-power-supply.html h t t p: / / pow e r. sa ge r. c om 127 66 46.3 39.1 3.6 DC OK AC OK