Name: MEAN WELL RHP-1UT-A
Brand: MEAN WELL
SKU: RHP-1UT-A

Description

RACK MOUNT POWER SUPPLIES RACK SHELF FOR 1600W TERMINAL BLOCK

Part Number

RHP-1UT-A

Price

Request Quote

Manufacturer

MEAN WELL

Lead Time

Request Quote

Category

Circuit Protection » AC-DC Power Supply

Specifications

Manufacturer

MEAN WELL

Manufacturers Part #

RHP-1UT-A

Industry Aliases

Series

RHP-1U

Factory Pack Quantity

Mechanical Style

Open / Enclosed Frame

Subcategory

AC-DC Power Supply

Datasheet

RHP-1U RACK SYSTEM-spec.pdf

230 KiB

Download

Extracted Text

1600~8000W 1U Distributed Power/Charger System RHP-1U Rack System ��<�� = ?$� ? Bauart gepruft Sicherheit ."6 ? --# ? -- ’��( �� egelma ge od os be wac g www.tuv.com ID 2000000000 �- - ? �> . ? � >.’��( �� ■ �� ■ �� ‧��)��/&��0�1�� ‧<�� ‧��+2��%��)��"##$�� ‧$��0�� *###$��)�� ‧9��)�� ‧3��)�� ‧<&��!�� ‧!��’��( ‧$�� ‧��4�� ‧9�� ’3��&/5��( ‧6�� ■ �� !��"##$%� �&��"##��’��%��(��&��"##�� $��)�� %��*###$��)��+”�� %��%��,-###$��.�� ■ �� $��%��&�� !�� "# ! � � ’ &�� &�� !��"##$�� 3��)�� 78�/&�7��’79&.,#�&�-( 78�/&�7��’79&.,#�&�-( :8�:�� :8�:�� *@8�4�A�� !�� 8�� ’��8��; !�� 8�&��( :�� &�� 5�� 4�� 7��!�� &/5 &/5�� B�� File Name:RHP-1U RACK SYSTEM-SPEC 2018-01-15 1600~8000W 1U Distributed Power/Charger System RHP-1U Rack System SPECIFICATION - Power Supply System MODEL RHP-8K1U -12 RHP-8K1U -24 RHP-8K1U -48 RECTIFIER RCP-1600-12 RCP-1600-24 RCP-1600-48 RACK SHELF RHP-1UI-A or RHP-1UT-A OUTPUT VOLTAGE 12V 24V 48V OUTPUT MAX. OUTPUT CURRENT 625A 335A 167.5A MAX. OUTPUT POWER Note.5 7500W 8040W 8040W VOLTAGE RANGE Note.6 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz 14A/115VAC 8A/230VAC 15A/115VAC 8.5A/230VAC 15A/115VAC 8.5A/230VAC AC CURRENT (Typ.) per RECTIFIER INPUT LEAKAGE CURRENT per RECTIFIER <1.5mA / 230VAC Note.8 OUTPUT VOLTAGE PROGRAMMABLE(PV) Adjustment of output voltage is allowable to 40 ~ 125% of nominal output voltage(60~125% for 12V). Please refer to the Function Manual. Adjustment of constant current level is allowable to 20 ~ 100% of rated current. Please refer to the Function Manual. CONSTANT CURRENT LEVEL PROGRAMMABLE(PC) REMOTE ON-OFF CONTROL By electrical signal or dry contact ON:short OFF:open FUNCTION Compensate voltage drop on the load wiring up to 0.5V REMOTE SENSE 5V @ 0.3A, 12V @ 0.8A AUXILIARY POWER Isolated TTL signal output for T-Alarm, AC-OK and DC-OK ALARM SIGNAL WORKING TEMP. -30 ~ +70℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH non-condensing ENVIRONMENT TEMP. COEFFICIENT ±℃ 0.03%/ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1, EAC TP TC 004 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC (0.5KVAC for 12V) WITHSTAND VOLTAGE ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Parameter Standard Test Level / Note Conducted EN55032 (CISPR32) / EN55011 (CISPR11) Class B EMC EMISSION Radiated EN55032 (CISPR32) / EN55011 (CISPR11) Class A Harmonic Current EN61000-3-2 Class A Voltage Flicker EN61000-3-3 ----- EN55024 , EN61204-3, EN61000-6-2 SAFETY & Parameter Standard Test Level / Note EMC (Note 4) ESD EN61000-4-2 Level 3, 8KV air ; Level 2, 4KV contact Radiated EN61000-4-3 Level 3 EFT / Burst EN61000-4-4 Level 3 EMC IMMUNITY Surge EN61000-4-5 Level 4, 2KV/Line-Line 4KV/Line-Earth Conducted EN61000-4-6 Level 3 Magnetic Field EN61000-4-8 Level 4 >95% dip 0.5 periods, 30% dip 25 periods, Voltage Dips and Interruptions EN61000-4-11 >95% interruptions 250 periods DIMENSION Rack 365*482.6*44(L*W*H, with mounting bracket) ; 365*440*44(L*W*H, without mounting bracket) OTHERS PACKING 5.5Kg; 3pcs/17.5Kg/2.11CUFT � �/��53:��,.#C/&��%��,6℃�� NOTE , ��D��,#4��,E��# ��D�->�� %��)��!�9&�� 7�� )��6F . �:��8��%�� - �:��B�� /��94&��A�� ###��?�.##�� :��B��94&��)�� 1�� 94&��%��G947�� 2�’��)��800�� ( 6 �3��&��"##�� " �<��)�� > ��%��)��)�� 7��)��%��#F * �:��B��)��B�� + �:��. 6℃℃ 0�###��6 0�###��,###�’"6##��( File Name:RHP-1U RACK SYSTEM-SPEC 2018-01-15 1600~8000W 1U Distributed Power/Charger System RHP-1U Rack System SPECIFICATION - Charger System MODEL RHB-8K1U -12 RHB-8K1U -24 RHB-8K1U -48 CHARGER RCB-1600-12 RCB-1600-24 RCB-1600-48 RACK SHELF RHP-1UI-A or RHP-1UT-A BOOST CHARGE VOLTAGE(Vboost)(default) 14.4V 28.8V 57.6V OUTPUT FLOAT CHARGE VOLTAGE(Vfloat)(default) 13.8V 27.6V 55.2V CURRENT RANGE 0 ~ 500A 0 ~ 275A 0 ~137.5A VOLTAGE RANGE Note.2 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz 14A/115VAC 8A/230VAC 15A/115VAC 8.5A/230VAC 15A/115VAC 8.5A/230VAC AC CURRENT (Typ.) per CHARGER INPUT LEAKAGE CURRENT per CHARGER <1.5mA / 230VAC Note.5 OUTPUT VOLTAGE PROGRAMMABLE(PV) Adjustment of output voltage is allowable to 75 ~ 125% of nominal output voltage. Please refer to the Function Manual. Adjustment of output current is allowable to 20 ~ 100% of rated current. Please refer to the Function Manual. OUTPUT CURRENT PROGRAMMABLE(PC) REMOTE ON-OFF CONTROL By electrical signal or dry contact ON:short OFF:open FUNCTION AUXILIARY POWER 5V @ 0.3A, 12V @ 0.8A ALARM SIGNAL The isolated TTL signal out, Please refer to Installation Manual -3mV /℃ / cell / (12V = 6 cells ; 24V = 12 cells ; 48V = 24 cells) TEMPERATURE COMPENSATION WORKING TEMP. -30 ~ +70℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH non-condensing ENVIRONMENT TEMP. COEFFICIENT ±℃ 0.03%/ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1, EAC TP TC 004 approved SAFETY STANDARDS WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC (0.5KVAC for 12V) SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH EMC (Note 4) EMC EMISSION Compliance to EN55032 (CISPR32) Conduction Class B, Radiation Class A ; EN61000-3-2,-3, EAC TP TC 020 Compliance to EN61000-4-2,3,4,5,6,8,11, EN61000-6-2 (ENe 50082-2), Heavy industry lev l, criteria A, EAC TP TC 020 EMC IMMUNITY DIMENSION Rack 365*482.6*44(L*W*H, with mounting bracket) ; 365*440*44(L*W*H, without mounting bracket) OTHERS 5.5Kg; 3pcs/17.5Kg/2.11CUFT PACKING � �/��53:��,.#C/&��%��,6℃�� NOTE , �<��)�� . �:��B�� /��94&��A�� ###��?�.##�� :��B��94&��)�� 1�� 94&��%��G947�� 2�’��)��800�� ( - �3��&��"##�� 6 �:��B��)��B�� " �:��. 6℃℃ 0�###��6 0�###��,###�’"6##��( File Name:RHP-1U RACK SYSTEM-SPEC 2018-01-15 1600~8000W 1U Distributed Power/Charger System RHP-1U Rack System Function Manual 1. Voltage Drop Compensation (Only for power supply system) 1.1 Remote Sense The remote sense compensates voltage drop on the load wiring up to 0.5V. +V +V CN2 1 +S RHP-1U System 2 LOAD -S -V -V Sense lines should be twisted in pairs 1.2 Local Sense Notice : The +S,-S have to be connected to the +V(signal),-V(signal),respectively, in order to get the correct output voltage if the remote sensing is not used. 3 CN2 +V 1 +S RHP-1U System 2 -V 4 -S 2. Output Voltage Programming (or, PV / remote voltage programming / remote adjust / margin programming / dynamic voltage trim) ※ In addition to the adjustment via the built-in potentiometer, the output voltage can be trimmed by applying EXTERNAL VOLTAGE. 100 1 CN2 +S 75 +V LOAD -V RHP-1U System 2 60 -S 26 PV 40 EXTERNAL VOLTAGE (DC) CN1 -V signal 24 20 +S & +V, -S & -V also need to be connected on CN1. (Only for power supply system) V 20 40 60 80 100 125 OUTPUT VOLTAGE (%) (Only for power supply system) RCP-1600-48 RCP-1600-24 RCP-1600-12 RCB-1600-48 RCB-1600-24 RCB-1600-12 60 30 15 60 30 15 Non-Linear Non-Linear 48 24 12 48 24 12 7.2 9 19.2 9.6 36 18 V V 0 0 0 0.4 1 4.7 5 0 0 0 0.4 1 4.7 5 EXTERNAL VOLTAGE (DC) EXTERNAL VOLTAGE (DC) ◎ For power supply system ◎ For charger system File Name:RHP-1U RACK SYSTEM-SPEC 2018-01-15 OUTPUT VOLTAGE(%) OUTPUT VOLTAGE(%) OUTPUT CURRENT (%) 1600~8000W 1U Distributed Power/Charger System RHP-1U Rack System 3. Output Current Programming (or, PC / remote current programming / dynamic current trim) ※ The output current can be trimmed to 20~100% of the rated current by applying EXTERNAL VOLTAGE. 1 CN2 +S +V LOAD -V RHP-1USystem -S 2 PC EXTERNAL 25 VOLTAGE CN1 -VSignal 24 +S & +V, -S & -V also need to be connected on CN1. (Only for power supply system) Iout Iout 110 100 100 Non-Linear Non-Linear 20 20 V V 0.4 1 4.7 5 0.4 1 4.7 5 EXTERNALVOLTAGE(VDC) EXTERNALVOLTAGE(VDC) ◎ For power supply system ◎ For charger system 4. Remote ON-OFF Control The PSU can be turned ON/OFF together or separately by using the "Remote ON/OFF" function. 33 CN1 ON/OFF A CN1 ON/OFF A 77 Between ON/OFF and +5V-AUX Output ON/OFF B ON/OFF B 11 11 ON/OFF C ON/OFF C 15 15 RHP-1U System RHP-1U System SW Open OFF ON/OFF D ON/OFF D 19 19 ON/OFF E ON/OFF E 21 21 +5V-AUX +5V-AUX SW Short ON 5.PMBus Communication Interface RCP-1600/RCB-1600 supports PMBus Rev. 1.1 with maximum 100KHz bus speed, allowing information reading, status monitoring, output trimming, etc. For details, please refer to the Function Manual. File Name:RHP-1U RACK SYSTEM-SPEC 2018-01-15 OUTPUTCURRENT(%) OUTPUT CURRENT (%) 1600~8000W 1U Distributed Power/Charger System RHP-1U Rack System Mechanical Specification Case No.242A Unit:mm 4222 6 3211 5 ADDRESS ADDRESS ADDRESS ADDRESS ADDRESS SWITCH SWITCH SWITCH SWITCH SWITCH CN1 CN2 4 2 26 2 E D C 3 1 25 1 B JK1 A RHP-1UT FG 10 N 8.2 L FG 10 N 8.2 L FG 10 N 8.2 L FG 10 N 8.2 L FG 10 N 8.2 L 4-M8 L=16 8 1 1 8 ADDRESS ADDRESS ADDRESS ADDRESS ADDRESS SWITCH SWITCH SWITCH SWITCH SWITCH CN2 CN1 4 2 26 2 3 1 25 1 E D C B JK1 A RHP-1UI IEC320-C14 IEC320-C14 IEC320-C14 IEC320-C14 IEC320-C14 4-M8 L=16 440 5-M4 L=4 5-M4 L=4 1 1 11.65 20.7 11.65 20.7 SVR SVR SVR SVR SVR 11.6 20.7 11.6 20.7 22 22 1 1 1 1 8.4 14 max. 35 Air flow direction Module E Module D Module C Module B Module A 10.2 STATUS STATUS STATUS STATUS STATUS 466.2 482.6 Chassis of RHP-1U RACK Mounting Surface ※ Mounting Instruction Hole No. Recommended Screw Size MAX. Penetration Depth L Recommended mounting torque 1 M4 4mm 7~10Kgf-cm Mounting Screw L File Name:RHP-1U RACK SYSTEM-SPEC 2018-01-15 365 306 24 7.65 44 7 306 29.5 7.4 24 7.65 1600~8000W 1U Distributed Power/Charger System RHP-1U Rack System ※ LED Status Indicators & Corresponding Signal at Function Pins ◎ For power supply system LED Description Green The power supply functions normally. Red The LED will present a constant red light when the abnormal status (OTP, OLP, fan fail and charging timeout) arises. The LED will flash with the red light when the internal temperature reaches 60℃; under this condition, the unit still operates normally Red (Flashing) without entering OTP. (In the meantime, an alarm signal will be sent out through the PMBus interface.) ◎ For charger system LED Description Green Float (stage 3) Orange Charging (stage 1 or stage 2) Red The LED will present a constant red light when the abnormal status (OTP, OLP, fan fail and charging timeout) arises. The LED will flash with the red light when the internal temperature reaches 60℃; under this condition, the unit still operates normally Red (Flashing) without entering OTP. (In the meantime, an alarm signal will be sent out through the PMBus interface.) ※ Connector Pin No. Assignment(CN1) : HRS DF11-26DP-2DS 26 2 Mating Housing HRS DF11-26DS or equivalent Terminal HRS DF11-**SC or equivalent 25 1 Pin No. Function Description High (4.5 ~ 5.5V) : When the input voltage is≧87Vrms . 1,5,9,13,17 AC-OK Low (-0.1 ~ 0.5V) : When the input voltage is≦75Vrms. The maximum sourcing current is 10mA and only for output. (Note.2) For power supply system High (4.5 ~ 5.5V) : When the Vout≦80%±5%. Low (-0.1 ~ 0.5V) : When Vout≧± 80% 5%. The maximum sourcing current is 10mA and only for output. (Note.2) 2,6,10,14,18 DC-OK For charger system High (4.5 ~ 5.5V) : When the Vout≦8V/16V/32V ±1V. Low (-0.1 ~ 0.5V) : When Vout≧8V/16V/32V ±1V. The maximum sourcing current is 10mA and only for output. (Note.2) DC OK is associated with battery low protection. Remote The unit can turn the output ON/OFF by electrical signal or dry contact between Remote ON-OFF and +5V-AUX. (Note.2) 3,7,11,15,19 ON-OFF Short (4.5 ~ 5.5V) : Power ON ; Open (0 ~ 0.5V) : Power OFF ; The maximum input voltage is 5.5V. High (4.5 ~ 5.5V) : When the internal temperature exceeds the limit of temperature alarm, or when fan fails. 4,8,12,16,20 T-ALARM Low (-0.1 ~ 0.5V) : When the internal temperature is normal, and when fan normally works. The maximum sourcing current is 10mA and only for output(Note.2) Auxiliary voltage output, 4.5~5.5V, referenced to GND-AUX (pin 22). 21 +5V-AUX The maximum load current is 0.3A. This output has the built-in "Oring diodes" and is not controlled by the remote ON/OFF control. 22 GND-AUX Auxiliary voltage output GND. The signal return is isolated from the output terminals (+V & -V). Auxiliary voltage output, 10.8~13.2V, referenced to GND-AUX (pin 22). 23 +12V-AUX The maximum load current is 0.8A. This output has the built-in "Oring diodes" and is not controlled by the remote ON/OFF control. 24 -V(Signal) Negative output voltage. For local sense use only; It can't be connected directly to the load. 25 PC Connection for output current programming. The current can be trimmed within its defined range. (Note.1) 26 PV Connection for output voltage programming. The voltage can be trimmed within its defined range. (Note.1) Note.1: Non-isolated signal, referenced to [-V(signal)]. Note.2: Isolated signal, referenced to GND-AUX. ※ Connector Pin No. Assignment(CN2) : HRS DF11-4DP-2DS 4 2 Mating Housing HRS DF11-4DS or equivalent Terminal HRS DF11-**SC or equivalent 3 1 ◎ For power supply system Positive sensing. The +S signal should be connected to the positive terminal of the load. The +S and -S leads should be 1 +S twisted in pair to minimize noise pick-up effect. The maximum line drop compensation is 0.5V. Negative sensing. The -S signal should be connected to the negative terminal of the load. The -S and +S leads should be 2 -S twisted in pair to minimize noise pick-up effect. The maximum line drop compensation is 0.5V. 3 +V(Signal) Positive output voltage. For local sense use only, can't be connected directly to the load. 4 -V(Signal) Negative output voltage. For local sense use only, can't be connected directly to the load. ◎ For charger system 1RTH+ Temperature sense associated with the temperature compensation funcion. 2RTH- 3,4 NC Not use. File Name:RHP-1U RACK SYSTEM-SPEC 2018-01-15 1600~8000W 1U Distributed Power/Charger System RHP-1U Rack System ※ Connector Pin No. Assignment(JK1) : RJ45 8 positions 8 1 1 8 Pin No. Function Description 1,2 DA,DB Differential digital signal for parallel control. (Note.1) Negative output voltage signal. 3 -V(signal) It is for local sense and certain function reference; it cannot be connected directly to the load. 4 CONTROL Remote ON-OFF control pin used in the PMBus interface. (Note.2) 5 NC Retain for future use. SDA For PMBus model: Serial Data used in the PMBus interface. (Note.2) 6 CANH For CANBus model: Data line used in CANBus interface. (Note.2) SCL For PMBus model: Serial Clock used in the PMBus interface. (Note.2) 7 CANL For CANBus model: Data line used in CANBus interface. (Note.2) 8 GND-AUX Auxiliary voltage output GND. The signal return is isolated from the output terminals (+V & -V). Note.1: Non-isolated signal, referenced to [-V(signal)]. Note.2: Isolated signal, referenced to GND-AUX. File Name:RHP-1U RACK SYSTEM-SPEC 2018-01-15

Frequently asked questions

Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

MEAN WELL RHP-1UT-A

Why buy from GID?

What they say about us

Related Products