MEAN WELL RPD-75A

75W  Dual Output Medical Grade RPD-75 series   + +     ■  ■  ‧5"×3" compact size ‧ ‧Medical safety approved (2 x MOPP) accroding to ‧ ANSI/AAMI ES60601-1 and IEC/EN60601-1 ‧ ‧Free air convection for rated power and 23.5CFM forced air ‧ convection for peak load ‧EMI class B for class Ⅰ configuration ‧Extremely low leakage current ‧Protections: Short circuit / Overload / Over voltage ‧Lifetime > 140K hours ‧3 years warranty Description RPD-75 is a 75W highly reliable green PCB type medical power supply with a high power density on the 5” by 3” footprint. It accepts 90~264VAC input and offers dual output voltages . RPD-75 is able to be used for ClassⅠ (with FG) system design. The extremely low leakage current is μ less than 150 A. In addition, it conforms to international medical regulations (2*MOPP) and EMC EN55011.       File Name:RPD-75-SPEC 2018-01-12 75W  Dual Output Medical Grade RPD-75 series SPECIFICATION MODEL RPD-75A RPD-75B OUTPUT NUMBER CH1 CH2 CH1 CH2 DC VOLTAGE 5V 12V 5V 24V RATED CURRENT 7A 3A 5A 2A CURRENT RANGE 1 ~ 9.5A 0.3 ~ 4A 1 ~ 6.8A 0.2 ~ 2.7A RATED POWER 71W 73W PEAK LOAD (23.5CFM) 95.5W 98.8W OUTPUT RIPPLE & NOISE (max.) Note.2 80mVp-p 120mVp-p 80mVp-p 120mVp-p VOLTAGE ADJ. RANGE CH1: 4.75 ~ 5.5V CH1: 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 ±2.0% ±6.0% ±2.0% ±6.0% LINE REGULATION ±0.5% ±1.0% ±0.5% ±1.0% LOAD REGULATION ±1.5% ±3.0% ±1.5% ±3.0% SETUP, RISE TIME 500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load HOLD UP TIME (Typ.) 90ms/230VAC 20ms/115VAC at full load VOLTAGE RANGE 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz 77% 79% EFFICIENCY (Typ.) INPUT AC CURRENT (Typ.) 1.5A/115VAC 1A/230VAC INRUSH CURRENT (Typ.) COLD START 25A/115VAC 50A/230VAC LEAKAGE CURRENT Note.4 Earth leakage current < 150 μA/264VAC , Touch current < 100 μA/264VAC 140 ~ 180% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION Ch1: 5.7 ~ 6.8V OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover -20 ~ +70℃ (Refer to "Derating Curve") WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH non-condensing ±0.03%/℃ (0 ~ 50℃) TEMP. COEFFICIENT VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes OPERATING ALTITUDE Note.5 3000 meters IEC60601-1, EAC TP TC 004, UL ANSI/AAMI ES60601-1, CAN/CSA-C22.2 No. 60601-1:14 - Edition 3 approved, SAFETY STANDARDS TUV EN60601-1 approved Primary-Secondary:2xMOPP, Primary-Earth:1xMOPP ISOLATION LEVEL WITHSTAND VOLTAGE I/P-O/P:4KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Parameter Standard Test Level / Note EN55011 (CISPR11) Class B Conducted emission EMC EMISSION EN55011 (CISPR11) Class B Radiated emission EN61000-3-2 Class A Harmonic current SAFETY & EN61000-3-3 ----- Voltage flicker EMC EN60601-1-2 (Note 8) Parameter Standard Test Level / Note ESD EN61000-4-2 Level 4, 15KV air ; Level 4, 8KV contact Level 3, 10V/m( 80MHz~2.7GHz ) EN61000-4-3 RF field susceptibility Table 9, 9~28V/m( 385MHz~5.78GHz ) EN61000-4-4 EFT bursts Level 3, 2KV EMC IMMUNITY EN61000-4-5 Surge susceptibility Level 4, 4KV/Line-FG ; 2KV/Line-Line EN61000-4-6 Conducted susceptibility Level 3, 10V EN61000-4-8 Magnetic field immunity Level 4, 30A/m 100% dip 1 periods, 30% dip 25 periods, EN61000-4-11 Voltage dip, interruption 100% interruptions 250 periods MTBF 569.9K hrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION (L*W*H) 127*76.2*31mm or 5" * 3" *1.22" inch 0.25Kg; 63pcs/17.3Kg/1.46CUFT PACKING ℃  μ  μ    ℃℃ NOTE       File Name:RPD-75-SPEC 2018-01-12 75W  Dual Output Medical Grade RPD-75 series Block Diagram fosc : 65KHz RECTIFIERS +V2 & FILTER RECTIFIERS RECTIFIERS EMI POWER +V1 I/P & & FILTER SWITCHING COM FILTER FILTER DETECTION FG CIRCUIT O.L.P. CONTROL O.V.P. Derating Curve 133 23.5CFM Forced air Cooling 100 Convection Cooling 80 50 20 -20 0 10 20 30 40 50 60 70 (HORIZONTAL) AMBIENT TEMPERATURE (℃) Output Derating VS Input Voltage 100 90 80 70 60 50 40 90 95 100 115 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:RPD-75-SPEC 2018-01-12 LOAD (%) LOAD (%) 4-ψ3.8 75W  Dual Output Medical Grade RPD-75 series Mechanical Specification Top View Unit:mm FAN 23.5CFM min. M2 HS3 M1 CN2 1 2 HS1 CN1 3 4 3 5 2 6 1 7 HS2 8 AC FUSE T2.5/250V FS2 FS1 115.8 5.6 127 Side View AC Input Connector (CN1) : JST B3P-VH or equivalent Assignment Mating Housing Terminal Pin No. 1 AC/N JST VHR JST SVH-21T-P1.1 2 No Pin or equivalent or equivalent 3 AC/L DC Output Connector (CN2) : JST B8P-VH or equivalent Pin No. Assignment Mating Housing Terminal 1,2 V1 3,4,5 COM JST VHR JST SVH-21T-P1.1 or equivalent or equivalent 6,7 V2 8 NC : Grounding Required 1.HS1,HS2,HS3 cannot be shorted. 2.M1 is safety ground. For better EMC performance,Please secure an electrical connection between M1,M2 and chassis grounding. Installation Manual Please refer to : http://www.meanwell.com/manual.html File Name:RPD-75-SPEC 2018-01-12 76.2 3max. 31 64.75 5.7 15cm