Name: MEAN WELL RSP-1600-48
Brand: MEAN WELL
SKU: RSP-1600-48

Description

1600 W, SINGLE OUTPUT, 48 V@33.5 A INDUSTRIAL ENCLOSED AC-DC POWER SUPPLY

Part Number

RSP-1600-48

Price

Request Quote

Manufacturer

MEAN WELL

Lead Time

Request Quote

Category

Circuit Protection » AC-DC Power Supply

Specifications

Manufacturer

MEAN WELL

Manufacturers Part #

RSP-1600-48

Industry Aliases

RSP-1600-48

Series

RSP-1600

Factory Pack Quantity

Application

General Purpose

Connection Type

Terminal

Cooling Method

Air-Cooled

Dimensions

11.81 x 3.35 x 1.60"

Efficiency

93%

Environmental Conditions

General Purpose

Industry

Industrial

Input Type

AC - Class I

Input Voltage Nominal

100-240 VAC

Isolation

3000 VAC

Mechanical Style

Open / Enclosed Frame

Mounting

Chassis Mount

Number of Outputs

Operating Temperature

-40 to +85°C (see derating curve)

Output Amps 1

33.5 A

Output Voltage V1 Nominal

48 V

Package Type

Enclosed

PFC

Yes

Power

1600 W

Subcategory

AC-DC Power Supply

Weight

2.1

Datasheet

RSP-1600-SPEC.pdf

381 KiB

Download

Extracted Text

1600W Power Supply with Single Output RSP-1600 series ��,�� 8 A � A = Bauart gepruft Sicherheit -�� A @% A )� :�"; ,, egelma ge od os be wac g www.tuv.com ��@ A A ��:�"; ��! ID 2000000000 -�-% ■ �� ■ �� ‧"��+� ��6�� ‧��#��7�"8�.5�9.��’%�� ‧.0�7�.5�%%�-$��%%�$) ��:��!��-��*�� #� �%��; ‧<��+��6��#�� ‧=��!��##��’-> ‧6� �� /��/��#�� ■ �� ‧4��+�� +�� ,,�/�� ‧6�� ,�� ‧��+�� !� ��’��:%?�; ‧&��,�� ,�� ,�� ‧<�� ,��45�466�� ,�� ‧8�� ,��!�� ‧��#�� 2�� 4��4&�� ,�� ‧� ��7��!� �� 4+� ��4+� �+�� ‧��/ �� 4+� ��,�� ‧�� ‧4��0<�� 5<�� ‧��, ‧%�� ■ �� !��"�� #��!��!� - �� $%��! ��&!�� #� �’�($�)*��+��##� ��!��,�� !��!��,��,��# �,��!�� .��!�,��/��!��!� ,�� #��0� ��+� 1�� +��+��#��2�/��/��3��+� ��/��#�� !��!�� ,,��1��+�� !� ��1� �,��45�466�� 1��2�� 1�� ■ �� !"#$$! �� ,,�� 4��+��:�$*�$)*�$C*�-�*�)@*; 4�� ,� &�� ,,�� 5�� <��B 5�� 9��B �0 �0<�� <�� 3�� 5 ��5<�� <�� 3�� File Name:RSP-1600-SPEC 2018-01-15 1600W Power Supply with Single Output RSP-1600 series SPECIFICATION MODEL RSP-1600-12 RSP-1600-24 RSP-1600-27 RSP-1600-36 RSP-1600-48 DC VOLTAGE 12V 24V 27V 36V 48V RATED CURRENT 125A 67A 59A 44.5A 33.5A CURRENT RANGE 0 ~ 125A 0 ~ 67A 0 ~ 59A 0 ~ 44.5A 0 ~ 33.5A RATED POWER 1500W 1608W 1593W 1602W 1608W RIPPLE & NOISE (max.) Note.2 150mVp-p 200mVp-p 200mVp-p 250mVp-p 300mVp-p OUTPUT VOLTAGE ADJ. RANGE 11.5 ~ 15V 23.5 ~ 30V 26.5 ~ 33.5V 35.5 ~ 45V 47.5 ~ 58.8V VOLTAGE TOLERANCE Note.4 ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME 1500ms, 60ms/230VAC at full load HOLD UP TIME (Typ.) 16ms / 230VAC at 75% load 10ms / 230VAC at full load VOLTAGE RANGE Note.5 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) 0.97/230VAC at full load EFFICIENCY (Typ.) 89% 91.5% 92% 92% 93% INPUT AC CURRENT (Typ.) Note.5 14A/115VAC 8A/230VAC 15A/115VAC 8.5A/230VAC INRUSH CURRENT (Typ.) COLD START 35A/230VAC LEAKAGE CURRENT <2mA / 230VAC 105 ~ 115% rated output power OVERLOAD Protection type : Constant current limiting, unit will shut down o/p voltage after 5 sec. re-power on to recover 15.75 ~ 18.75V 31.5 ~ 37.5V 35.2 ~ 41.9V 47.2 ~ 56.3V 63 ~ 75V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down Adjustment of output voltage is allowable to 40 ~ 125% of nominal output voltage (60 ~ 125% for 12V). OUTPUT VOLTAGE PROGRAMMABLE(PV) Note 6 Please refer to the Function Manual. OUTPUT CURRENT Adjustment of constant current level is allowable to 20 ~ 100% of rated current. Please refer to the Function Manual. PROGRAMMABLE(PC) Note 6 FUNCTION 5V @ 0.3A, 12V @ 0.8A AUXILIARY POWER By electrical signal or dry contact Power ON:short Power OFF:open. Please refer to the Function Manual REMOTE ON-OFF CONTROL Compensate voltage drop on the load wiring up to 0.5V. Please refer to the Function Manual REMOTE SENSE ALARM SIGNAL Isolated signal output for T-alarm and DC OK -30 ~ +70℃ (Refer to "Derating Curve") WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH non-condensing ENVIRONMENT TEMP. COEFFICIENT ±℃ 0.03%/ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1, EAC TP TC 004 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC WITHSTAND VOLTAGE ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Parameter Standard Test Level / Note Conducted EN55032 (CISPR32) / EN55011 (CISPR11) Class B Radiated EN55032 (CISPR32) / EN55011 (CISPR11) Class A EMC EMISSION Harmonic Current EN61000-3-2 Class A Voltage Flicker EN61000-3-3 ----- SAFETY & EN55024 , EN61204-3, EN61000-6-2 EMC Parameter Standard Test Level / Note (Note 7) ESD EN61000-4-2 Level 3, 8KV air ; Level 2, 4KV contact Radiated EN61000-4-3 Level 3 EFT / Burst EN61000-4-4 Level 3 EMC IMMUNITY Surge EN61000-4-5 Level 4, 2KV/Line-Line 4KV/Line-Earth Conducted EN61000-4-6 Level 3 Magnetic Field EN61000-4-8 Level 4 >95% dip 0.5 periods, 30% dip 25 periods, Voltage Dips and Interruptions EN61000-4-11 >95% interruptions 250 periods MTBF 160.9K hrs min. Telcordia SR-332 (Bellcore) ; 42.1K hrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 300*85*41mm (L*W*H) 2.1Kg;6pcs/13.6Kg/1.03CUFT PACKING �� ,�� 54&��,�� ,�� $-�*��1� ��$%℃��#��,/��,�� NOTE $��D�� ,�� $�0=E��#�/��!�/��$F�� ,��!��#�D�)C�#�� -��"�� #��!��+��,��/��!��!� ��!��!��.��!��9��/��B�� ,�� +��!�� ,� ��!��%>� )��&�� 7�� 1�� %�� ,��/�� +��!��B��!�� +��#� �,� �� *��#��!�� 0<��5<��*��#��!�� !� �� 0<��5<�� *�� C��&!�� ,��!��!��/��#��3��,��!��.0�� /��2��/��,��!�� C$�,,A-��,,�,��!��,,��#��!��B��&!��#��3��,��,��/�� #� ,��!��,��.0�� +��6� ��!�� #� ,��!��.0��1�� #� ��G.09��#��,�� H�:��+��/��!��7��,��,; @��&!��,/��,�� #�-�%℃℃ ��,��!�#��,��#�% ��,��!�#��,��#� �� !��!� ��!��$��,:�%��#�;� File Name:RSP-1600-SPEC 2018-01-15 1600W Power Supply with Single Output RSP-1600 series Block Diagram PFC fosc : 90KHz PWM fosc : 70KHz +S ACTIVE ORING RECTIFIERS RECTIFIERS POWER +V EMI INRUSH I/P FET & & CURRENT FILTER SWITCHING PFC FILTER LIMITING -V -S O.V.P. ORING FET CONTROL DETECTION PFC PWM PV/PC CONTROL CIRCUIT CONTROL TRANSCEIVERS DA/DB T-Alarm DETECTION MCU MCU DATA CIRCUIT DC-OK ISOLATION SDA/SCL or O.T.P. ( CANH/CANL FAN Remote ON-OFF AUX 12V/0.8A RECTIFIERS POWER & AUX POWER FILTER 5V/0.3A Static Characteristics MODEL 12V 24V 27V 36V 48V 100 INPUT 90 1500W 1608W 1593W 1602W 1608W 180~264VAC 125A 67A 59A 44.5A 33.5A 80 1200W 1286.4W 1274.4W 1281.6W 1286.4W 70 115VAC 100A 53.6A 47.2A 35.6A 26.8A 60 1050W 1125.6W 1115.1W 1121.4W 1125.6W 50 100VAC 87.5A 46.9A 41.3A 31.15A 23.45A 40 900W 964.8W 955.8W 961.2W 964.8W 30 90VAC 75A 40.2A 35.4A 26.7A 20.1A 90 100 115 180 264 INPUT VOLTAGE (VAC) 60Hz Derating Curve Efficiency vs Load (48V Model) 94 93 92 100 91 90 80 230VAC 89 Input only 88 60 87 50 86 40 85 84 20 83 82 -30 -25 -10 0 15 30 50 60 70 (HORIZONTAL) 81 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% AMBIENT TEMPERATURE (℃) LOAD ◎ The curve above is measured at 230VAC. File Name:RSP-1600-SPEC 2018-01-15 LOAD (%) LOAD (%) EFFICIENCY (%) ( 1600W Power Supply with Single Output RSP-1600 series Function Manual 1. Voltage Drop Compensation 1.1 Remote Sense ※ The Remote Sense compensates voltage drop on the load wiring up to 0.5V +V PIN15 +S LOAD PIN16 -S -V -V CN1 +V Sense lines should be twisted in pairs to minimize noise pick-up. ◎ The +S signal should be connected to the positive terminal of the load whereas -S signal to the negative terminal. 1.2 Local Sense ※�The +S,-S have to be connected to the +V(signal), -V(signal), respectively, as the following diagram, in order to get the correct output voltage if Remote Sense is not used. +V PIN13 +V(signal) LOAD PIN15 +S -V PIN14 -V(signal) PIN16 -S -V +V CN1 2. Output Voltage Programming (or, PV / remote voltage programming / remote adjust / margin programming / dynamic voltage trim) ※ In addition to the adjustment via the built-in potentiometer, the output voltage can be trimmed by applying EXTERNAL VOLTAGE. PIN14 -V(signal) PIN12 PV -V CN1 +V EXTERNAL VOLTAGE (DC) Vout 100 125 80 100 Non-Linear 60 12V 40 60 20 40 V Others 40 60 80 100 125 V OUTPUT VOLTAGE (%) 0 0.4 1 4.7 5 ◎ The rated current should change with the Output Voltage Programming accordingly. EXTERNAL VOLTAGE (DC) ◎ For Remote Sense / Local Sense, please refer to “Voltage Drop Compensation” section. File Name:RSP-1600-SPEC 2018-01-15 OUTPUT VOLTAGE(%) OUTPUT CURRENT (%) 1600W Power Supply with Single Output RSP-1600 series 3. Constant Current Level Programming (or, PC / remote current programming / dynamic current trim) ※ The constant current level can be trimmed to 20~100% of the rated current by applying EXTERNAL VOLTAGE. Iout 110 100 Non-Linear PIN11 PC PIN14 -V(signal) -V CN1 +V EXTERNAL VOLTAGE (DC) 20 ◎ For Remote Sense / Local Sense, please refer to “Voltage Drop Compensation” section. V 0.4 1 4.7 5 EXTERNALVOLTAGE(VDC) 4. Remote ON-OFF Control ※ The power supply can be turned ON/OFF individually or along with other units by using the "Remote ON-OFF" function. Between Remote ON-OFF and +5V-AUX Power Supply Status PIN3 +5V-AUX switch Switch Short ON Switch Open OFF PIN4 Remote ON-OFF -V CN1 +V 5. Alarm Signal Output ※ There are 2 alarm signals, DC OK and T-ALARM, in TTL signal form, on CN1. These signals are isolated from output. The maximum sink current is 10mA. PIN5 DC OK Application Circuit PIN6 T-ALARM -V CN1 +V PIN2 GND-AUX File Name:RSP-1600-SPEC 2018-01-15 OUTPUTCURRENT(%) 1600W Power Supply with Single Output RSP-1600 series 6.Current Sharing with Remote Sense RSP-1600 has the built-in active current sharing function and can be connected in parallel, up to 6 units, to provide higher output power as exhibited below : ※ The power supplies should be paralleled using short and large diameter wiring and then connected to the load. ※ Difference of output voltages among parallel units should be less than 0.2V. ※ The total output current must not exceed the value determined by the following equation: Maximum output current at parallel operation=(Rated current per unit)×× (Number of unit) 0.9 ※ When the total output current is less than 5% of the total rated current, or say (5% of Rated current per unit)×(Number of unit) the current shared among units may not be balanced. ※ Under parallel operation ripple of the output voltage may be higher than the SPEC at light load condition. It will go back to normal ripple level once the output load is more than 5%. ※ CN500/SW1 Function pin connection PSU1 PSU2 PSU3 PSU4 PSU5 PSU6 Parallel CN500 SW1 CN500 SW1 CN500 SW1 CN500 SW1 CN500 SW1 CN500 SW1 1 unit X ON 2 unit V ON V ON 3 unit V ONVV OFF ON 4 unit V V OFF V OFF V ON ON 5 unit V ON V OFF V OFF V OFF V ON 6 unit V ON V OFF V OFFVV OFF OFF V ON (V : CN500 connected ; X : CN500 not connected.) RSP-1600 RSP-1600 RSP-1600 RSP-1600 RSP-1600 RSP-1600 PSU1 PSU2 PSU3 PSU4 PSU5 PSU6 -V -V -V -V -V -V TB1 TB1 TB1 TB1 TB1 TB1 +V +V +V +V +V +V -V +V LOAD Fig 5.1 1 3511111 33333 55555 DA DB -V(signal) DA DB -V(signal) DA DB -V(signal) DA DB -V(signal) DA DB -V(signal) DA DB -V(signal) DA DB -V(signal) DA DB -V(signal) DA DB -V(signal) DA DB -V(signal) DA DB -V(signal) DA DB -V(signal) 24622222 44444 66666 PSU1 CN500 PSU6 CN500 PSU2 CN500 PSU3 CN500 PSU4 CN500 PSU5 CN500 If the lines of CN500 are too long, they should be twisted in pairs to avoid the noise. ◎ DA,DB and -V(signal) are connected mutually in parallel. ◎ For Remote Sense / Local Sense, please refer to “Voltage Drop Compensation” section. File Name:RSP-1600-SPEC 2018-01-15 ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣ 7 8 1 2 1 15 16 2 CN1 CN500 ψ6.5 1600W Power Supply with Single Output RSP-1600 series Mechanical Specification Case No.250 Unit:mm 5.8 252 30 2-M4 L=5 20 1 1 28 -V 38 +V Air flow LED SVR direction SW1 (Top View) 1 2 I/P 3 2 2 2-M4 L=5 2-M3 12 max. 252 5.8 300 1 1 (Bottom View) 3-M3 L=4 1 16.1 264.7 Chassis of RSP-1600 Mounting Surface ※ Mounting Instruction Hole No. Recommended Screw Size MAX. Penetration Depth L Recommended mounting torque 1 M3 6mm 6~8Kgf-cm 2 M4 7mm 7~10Kgf-cm Mounting Screw ※ Control Pin No. Assignment(CN1) : HRS DF11-16DP-2DS or equivalent 1 15 Mating Housing HRS DF11-16DS or equivalent Terminal HRS DF11-**SC or equivalent 2 16 Pin No. Function Description Auxiliary voltage output, 10.6~13.2V, referenced to GND-AUX (pin2). 1 +12V-AUX The maximum load current is 0.8A. This output has the built-in "Oring diodes" and is not controlled by “Remote ON-OFF”. Auxiliary voltage output GND. 2 GND-AUX The signal return is isolated from the output terminals (+V & -V). Auxiliary voltage output, 4.5~5.5V, referenced to GND-AUX (pin2). 3 +5V-AUX The maximum load current is 0.3A. This output has the built-in "Oring diodes" and is not controlled by “Remote ON-OFF Remote The unit can turn the output ON/OFF by electrical signal or dry contact between Remote ON/OFF and +5V-AUX. (Note.2) 4 ON-OFF Short (4.5 ~ 5.5V) : Power ON ; Open (0 ~ 0.5V) : Power OFF ; The maximum input voltage is 5.5V. High (4.5 ~ 5.5V) : When the Vout≦± 80% 5%. 5 DC-OK Low (-0.1 ~ 0.5V) : When Vout≧± 80% 5%. The maximum sourcing current is 10mA and only for output. (Note.2) High (4.5 ~ 5.5V) : When the internal temperature exceeds the limit of temperature alarm, or when Fan fails. 6 T-ALARM Low (-0.1 ~ 0.5V) : When the internal temperature is normal, and when Fan normally works. The maximum sourcing current is 10mA and only for output(Note.2) NC For standard model: Retain for future use. 7,8,9 A0,A1,A2 For PMBus / CANBus model: PMBus / CANBus interface address lines. (Note.1) 10 NC Retain for future use. 11 PC Connection for constant current level programming. (Note.1) 12 PV Connection for output voltage programming. (Note.1) Positive output voltage signal. 13 +V (Signal) It is for local sense; it cannot be connected directly to the load. Negative output voltage signal. 14 -V (Signal) It is for local sense and certain function reference; it cannot be connected directly to the load. 15 +S Positive sensing for remote sense. 16 -S Negative sensing for remote sense. Note.1: Non-isolated signal, referenced to [-V(signal)]. Note.2: Isolated signal, referenced to GND-AUX. File Name:RSP-1600-SPEC 2018-01-15 29.6 13 21.6 2 9 10 70 7.5 42.5 22.8 22.8 41 85 1600W Power Supply with Single Output RSP-1600 series ※ LED Status Indicators LED Description Green The power supply functions normally. Red Abnormal status (Over temperature protection, Overload protection, Fan fail.) ※ AC Input Terminal Pin No. Assignment Pin No. Assignment Diagram Maximum mounting torque 1 FG 2 AC/N 8Kgf-cm 3 AC/L ※ Control Pin No. Assignment(CN500) : HRS DF11-8DP-2DS or equivalent 1 7 Mating Housing HRS DF11-8DS or equivalent Terminal HRS DF11-**SC or equivalent 2 8 Pin No. Function Description 1,2 DA Differential digital signal for parallel control. 3,4 DB Differential digital signal for parallel control. Negative output voltage signal. 5,6 -V (Signal) It is for certain function reference; it cannot be connected directly to the load. NC For standard model: None. 7 SDA For PMBus model: Serial Data used in the PMBus interface. (Note) CANH For CANBus model: Data line used in CANBus interface. (Note) NC For standard model: None. 8 SCL For PMBus model: Serial Clock used in the PMBus interface. (Note) CANL For CANBus model: Data line used in CANBus interface. (Note) Note: Isolated signal, referenced to GND-AUX. ※ Control Pin No. Assignment(SW1) Pin No. Function Description Terminal 1,2 SW1 is the selector of terminal resistor that is designed for DA/DB signals and parallel control function. resistance Installation Manual Please refer to : http://www.meanwell.com/manual.html File Name:RSP-1600-SPEC 2018-01-15

Frequently asked questions

Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

MEAN WELL RSP-1600-48

Why buy from GID?

What they say about us

Related Products