MEAN WELL RSP-2000-48

Mean Well RSP-2000 SERIES 2000 Watt Enclosed with Fan Power Supply 2000W Power Supply with Single Output RSP-2000 series Measures: 11.61 x 5.00 x 1.61”” €  š “ š ‘ Bauart gepruft Sicherheit  š  ™ š  ˆ‹  egelma ge od o s be wac g www.tuv.com ID 2000000000 ˜ š š ˜ˆ‹   ■  ■  �‡Œ

‚ �  �­
‡Ž
 �      �‘‚ 
 ’ �‚ƒƒ
€ �…

‡‚‚ƒ ■  �Œ‡
 ‚
Š“ˆ”•‹ �

�­
…… �

 
–† €  …—‚…Ž‚ �  �Ž 
… ‡…‡‡‚ �­
 …‡
 �€‚ƒ‚ �…‚ �„ � † ■  „Ž  —“‚

Œ€†
† †˜  › ‰Œ
‡‚ †  €

 
˜  ƒ ƒ
† œ†ž‚ 

™ ˜ ℃ ‡œ„Ž ‡‡‚–ƒƒŸ
‚‡
ƒ


   

‚‚œ‡
 ‚œ……œ
–†œ˜ ■       
   …

‡‚ˆ ‰ ‰Š‰‹ …

†‚  File Name:RSP-2000-SPEC 2016-01-20 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-RSP-2000-power-supply.html h t t p: / / pow e r. sa ge r. c om Mean Well RSP-2000 SERIES 2000 Watt Enclosed with Fan Power Supply 2000W Power Supply with Single Output RSP-2000 series Measures: 11.61 x 5.00 x 1.61”” SPECIFICATION MODEL RSP-2000-12 RSP-2000-24 RSP-2000-48 DC VOLTAGE 12V 24V 48V RATED CURRENT 100A 80A 42A CURRENT RANGE 0 ~ 100A 0 ~ 80A 0 ~ 42A RATED POWER 1200W 1920W 2016W RIPPLE & NOISE (max.) Note.2 150mVp-p 200mVp-p 300mVp-p OUTPUT VOLTAGE ADJ. RANGE 10.5 ~ 14V 21 ~ 28V 42 ~ 56V VOLTAGE TOLERANCE Note.3±2.0% ±1.0% ±1.0% LINE REGULATION ±1.0% ±0.5% ±0.5% LOAD REGULATION ±1.0% ±0.5% ±0.5% SETUP, RISE TIME 1500ms, 60ms/230VAC at full load HOLD UP TIME (Typ.) 16ms/230VAC at 75% load 10ms/230VAC at full load VOLTAGE RANGE Note.5 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) 0.97/230VAC at full load EFFICIENCY (Typ.) 87% 90.5% 92% INPUT 13A/115VAC 7A/230VAC 16A/115VAC 10A/230VAC 16A/115VAC 10A/230VAC AC CURRENT (Typ.) Note.5 INRUSH CURRENT (Typ.) COLD START 50A LEAKAGE CURRENT <2mA / 240VAC 105 ~ 125% rated output power OVERLOAD Protection type : Constant current limiting, unit will shut down o/p voltage after 5 sec. re-power on to recover 14.7 ~ 17.5V 29.5 ~ 35V 57.6 ~ 67.2V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, recovers automatically after temperature goes down OVER TEMPERATURE Adjustment of output voltage is allowable to 40 ~ 115% of nominal output voltage. Please refer to the Function Manual. OUTPUT VOLTAGE PROGRAMMABLE(PV) Up to 8000W or (3+1) units. Please refer to the Function Manual. CURRENT SHARING 5V @ 0.3A, 12V @ 0.8A FUNCTION AUXILIARY POWER By electrical signal or dry contact Power ON:open Power OFF:short. Please refer to the Function Manual. REMOTE ON-OFF CONTROL Compensate voltage drop on the load wiring up to 0.5V. Please refer to the Function Manual. REMOTE SENSE The isolated TTL signal out. Please refer to the Function Manual. DC OK SIGNAL -35 ~ +70℃ (Refer to "Derating Curve") WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT ±℃ 0.03%/ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC WITHSTAND VOLTAGE ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Parameter Standard Test Level / Note Conducted EN55022 (CISPR22) / EN55011 (CISPR11) Class A EMC EMISSION Radiated EN55022 (CISPR22) / EN55011 (CISPR11) Class A Harmonic Current EN61000-3-2 ----- Voltage Flicker EN61000-3-3 ----- SAFETY & EN55024 , EN61204-3, EN61000-6-2 EMC Parameter Standard Test Level / Note (Note 4) ESD EN61000-4-2 Level 3, 8KV air ; Level 2, 4KV contact Radiated EN61000-4-3 Level 3 EFT / Burst EN61000-4-4 Level 3 EMC IMMUNITY Surge EN61000-4-5 Level 4, 2KV/Line-Line 4KV/Line-Earth Conducted EN61000-4-6 Level 3 Magnetic Field EN61000-4-8 Level 4 >95% dip 0.5 periods, 30% dip 25 periods, Voltage Dips and Interruptions EN61000-4-11 >95% interruptions 250 periods MTBF 159K hrs min. Telcordia SR-332 (Bellcore) ; 46.3K hrs min. MIL-HDBK-217F (25℃℃ )7F (25 ) OTHERS DIMENSION 295*127*41mm (L*W*H) PACKING 1.95Kg; 6pcs/12.7Kg/1.15CUFT         ℃
   NOTE    
  
  ­ € ‚   ƒ„   …     ­   ­   ƒ        
    †   ‡
 ˆ 
  ­    „ ‰Œ  Š   †   
‚  ‡‹ Ž­      ‡‘‡’ ­   “”‹
  …•• – — ­
    ‹­˜ Š  ­ ‹ File Name:RSP-2000-SPEC 2016-01-20 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-RSP-2000-power-supply.html h t t p: / / pow e r. sa ge r. c om Mean Well RSP-2000 SERIES 2000 Watt Enclosed with Fan Power Supply 2000W Power Supply with Single Output RSP-2000 series Measures: 11.61 x 5.00 x 1.61”” Block Diagram PFC fosc : 110KHz PWM fosc : 90KHz +S ACTIVE ORING RECTIFIERS RECTIFIERS POWER EMI +V INRUSH I/P & & FET FILTER CURRENT SWITCHING PFC FILTER LIMITING -V -S O.V.P. ORING FET CONTROL DETECTION PFC PWM PV CIRCUIT CONTROL CONTROL TRANSCEIVERS DA/DB DETECTION MCU MCU T-Alarm DATA CIRCUIT ISOLATION DC-OK O.T.P. FAN Remote ON-OFF AUX 12V/0.8A RECTIFIERS POWER & AUX POWER FILTER 5V/0.3A Static Characteristics MODEL 12V 24V 48V 100 INPUT 90 1200W 1920W 2016W 180~264VAC 100A 80A 42A 80 75 12V 1080W 1632W 1713.6W 70 115VAC 90A 68A 35.7A 65 24V,48V 1020W 1440W 1512W 100VAC 50 85A 60A 31.5A 40 960W 1248W 1310.4W 90VAC 80A 52A 27.3A 90 100 115 180 264 INPUT VOLTAGE (VAC) 60Hz Efficiency vs Load (48V Model) Derating Curve 94 100 92 90 80 for 180~264VAC 88 60 50 86 40 84 20 82 80 (HORIZONTAL) -35 -25 -10 0 15 30 50 60 70 10 20 30 40 50 60 70 80 90 100 AMBIENT TEMPERATURE (℃) LOAD ◎ The curve above is measured at 230VAC. File Name:RSP-2000-SPEC 2016-01-20 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-RSP-2000-power-supply.html h t t p: / / pow e r. sa ge r. c om LOAD (%) LOAD (%) EFFICIENCY (%) Mean Well RSP-2000 SERIES 2000 Watt Enclosed with Fan Power Supply 2000W Power Supply with Single Output RSP-2000 series Measures: 11.61 x 5.00 x 1.61”” Function Manual 1. Remote Sense ※ The Remote Sense compensates voltage drop on the load wiring up to 0.5V +V PIN2 -S PIN1 +S LOAD -V CN501 -V +V Sense lines should be twisted in pairs to minimize noise pick-up. ◎ The +S signal should be connected to the positive terminal of the load whereas -S signal to the negative terminal. 2. Output Voltage Programming (or, PV / remote voltage programming / remote adjust / margin programming / dynamic voltage trim) ※ In addition to the adjustment via the built-in potentiometer, the output voltage can be trimmed to 40~115% of the nominal voltage by applying EXTERNAL VOLTAGE. PIN2 -S PIN1 +S PIN3 PV EXTERNAL VOLTAGE (DC) -V +V CN501 PIN4 GND ◎+S & +V, -S & -V also need to be connected on CN501. Vout 100 115 Non-Linear 100 87 80 for 12V model 60 60 40 40 20 30 for 24V,48V V model 20 40 60 80 100 115 V 0 0.4 1 2 3 4 4.7 5 OUTPUT VOLTAGE (%) EXTERNAL VOLTAGE (DC) ◎ The rated current should change with the Output Voltage Programming accordingly. 3. Remote ON-OFF Control The power supply can be turned ON/OFF individually or along with other units by using the "Remote ON-OFF" function. PIN7 Remote ON-OFF Between Remote ON-OFF and +5V-AUX Power Supply Status switch Switch Open ON Switch Short OFF PIN11 +5V-AUX -V +V CN501 File Name:RSP-2000-SPEC 2016-01-20 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-RSP-2000-power-supply.html h t t p: / / pow e r. sa ge r. c om OUTPUT VOLTAGE(%) OUTPUT CURRENT (%) Mean Well RSP-2000 SERIES 2000 Watt Enclosed with Fan Power Supply 2000W Power Supply with Single Output RSP-2000 series Measures: 11.61 x 5.00 x 1.61”” 4.Current Sharing with Remote Sense RSP-2000 has the built-in active current sharing function and can be connected in parallel, up to 4 units, to provide higher output power as exhibited below : ※ The power supplies should be paralleled using short and large diameter wiring and then connected to the load. ※ Difference of output voltages among parallel units should be less than 0.2V. ※ The total output current must not exceed the value determined by the following equation: Maximum output current at parallel operation=(Rated current per unit)×× (Number of unit) 0.9 ※ Under parallel operation, the minimum output load should be greater than 5% of total output load; otherwise, it is likely that only one unit operates whereas other units may enter standby mode or their LED status indicators may not turn on. ※ When the total output current is less than 5% of the total rated current, or say (5% of Rated current per unit)×(Number of unit) the current shared among units may not be fully balanced. ※ CN502/CN504 Function pin connection PSU1 PSU2 PSU3 PSU4 Parallel CN502 CN504 CN502 CN504 CN502 CN504 CN502 CN504 1 unit X V 2 unit V V V V 3 unit V V V X V V 4 unit V VV VV X V X ◎V is CN502/CN504 connected to plug pin, X is CN502/CN504 not connected to plug pin. RSP-2000 RSP-2000 RSP-2000 RSP-2000 PSU1 PSU2 PSU3 PSU4 -V +V CN504 TB1 -V +V CN504 TB1 -V +V CN504 TB1 -V +V CN504 TB1 1 5 1 5 1 5 1 5 2 6 2 6 2 6 2 6 CN502 CN502 CN502 CN502 -V +V LOAD Fig 4.1 1 3 5 111 333 555 DA DB GND DA DB GND DA DB GND DA DB GND DA DB GND DA DB GND DA DB GND DA DB GND 2 4 6 222 444 666 PSU1 CN502 PSU2 CN502 PSU3 CN502 PSU4 CN502 If the lines of CN502 are too long, they should be twisted in pairs to avoid the noise. ◎ DA,DB and GND are connected mutually in parallel. File Name:RSP-2000-SPEC 2016-01-20 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-RSP-2000-power-supply.html h t t p: / / pow e r. sa ge r. c om ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣