MEAN WELL RSP-2400-48

MEAN WELL RSP-2400 SERIES 2400 Watt Enclosed with Fan Power Supply 2400W Power Supply with Single Output RSP-2400 series Measures: 10.95 x 7.00 x 2.50”” €  Ÿ ˆ Ÿ š Bauart gepruft Sicherheit ”‹ Ÿ ””†‹ Ÿ ž† ˜ ™  egelma ge od os be wac g www.tuv.com † Ÿ Ÿ † ˜ ™   ID 2000000000 ” ■  ■  �‰
‹Œ Ž‰ �  �­
‘…
 �      �š‚ 
† › �‚ƒƒ
€ �—

‘‚‚ƒ ■  �‰‘
 ‚
” ˆ˜ œ™ �

�­
—— �

 
•Š Š  —‡‚ �  �… 
— ‘—‘‘‚ �­
 —‘
 �€‚ƒ‚ �—‚ �„ � Š ■  „…  †‡ˆ ‚

‰ €Š
†   ‹Œ Ž‰ 
‘‚ Š  €

 
†  ƒ ƒ
Š ’Š“‚ 

 ” † ’℃ ‘’„…  ‘‘‚•ƒƒ–
‚‘
ƒ


  

‚‚’ ‘
 ‚’——’
•Š’† ■       
   —

‘‚˜ Ž Ž‹Ž™ —

Š‚  File Name:RSP-2400-SPEC 2016-02-24 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-RSP-2400-power-supply.html h t t p: / / pow e r. sa ge r. c om MEAN WELL RSP-2400 SERIES 2400 Watt Enclosed with Fan Power Supply 2400W Power Supply with Single Output RSP-2400 series Measures: 10.95 x 7.00 x 2.50”” SPECIFICATION MODEL RSP-2400-12 RSP-2400-24 RSP-2400-48 DC VOLTAGE 12V 24V 48V RATED CURRENT 166.7A 100A 50A CURRENT RANGE 0 ~ 166.7A 0 ~ 100A 0 ~ 50A RATED POWER 2000.4W 2400W 2400W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 200mVp-p OUTPUT VOLTAGE ADJ. RANGE 10.8 ~ 13.2V 22 ~ 28V 43 ~ 56V VOLTAGE TOLERANCE Note.3 ±1.0% ±1.0% ±1.0% LINE REGULATION ±0.5% ±0.5% ±0.5% LOAD REGULATION ±0.5% ±0.5% ±0.5% SETUP, RISE TIME 1000ms, 80ms at full load HOLD UP TIME (Typ.) 12ms at full load VOLTAGE RANGE 180 ~ 264VAC 254 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) 0.95/230VAC at full load INPUT EFFICIENCY (Typ.) 88% 90.5% 91.5% AC CURRENT (Typ.) 15.5A/180VAC 12A/230VAC INRUSH CURRENT (Typ.) 60A/230VAC LEAKAGE CURRENT <2.0mA / 240VAC 100 ~ 112% rated output power OVERLOAD (OLP) User adjustable continuous constant current limiting or constant current limiting with delay shutdown after 5 seconds, re-power on to recover 13.8 ~ 16.8V 28.8 ~ 33.6V 57.6 ~ 67.2V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, recovers automatically after temperature goes down OVER TEMPERATURE 2.4 ~ 13.2V 4.8 ~ 28V 9.6 ~ 56V OUTPUT VOLTAGE PROGRAMMABLE(PV) Please refer to the Function Manual. CURRENT SHARING Up to 7200W or (2+1) units. Please refer to the Function Manual. 12V@0.1A(Only for Remote ON-OFF control) FUNCTION AUXILIARY POWER Please refer to the Function Manual REMOTE ON-OFF CONTROL Compensate voltage drop on the load wiring up to 0.25V. Please refer to the Function Manual. REMOTE SENSE ALARM SIGNAL OUTPUT Power OK signal. Please refer to the Function Manual -20 ~ +70℃ (Refer to "Derating Curve") WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT ±℃ 0.05%/ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Parameter Standard Test Level / Note Conducted EN55022 (CISPR22) / EN55011 (CISPR11) Class A Radiated EN55022 (CISPR22) / EN55011 (CISPR11) Class A EMC EMISSION Harmonic Current EN61000-3-2 ----- Voltage Flicker EN61000-3-3 ----- SAFETY & EN55024 , EN61204-3, EN61000-6-2 EMC Parameter Standard Test Level / Note (Note 4) ESD EN61000-4-2 Level 3, 8KV air ; Level 2, 4KV contact Radiated EN61000-4-3 Level 3 EFT / Burst EN61000-4-4 Level 3 EMC IMMUNITY Surge EN61000-4-5 Level 4, 2KV/Line-Line 4KV/Line-Earth Conducted EN61000-4-6 Level 3 Magnetic Field EN61000-4-8 Level 4 >95% dip 0.5 periods, 30% dip 25 periods, Voltage Dips and Interruptions EN61000-4-11 >95% interruptions 250 periods MTBF 234.1K hrs min. Telcordia SR-332 (Bellcore) ; 83.9K hrs min. MIL-HDBK-217F (25℃℃ )7F (25 ) OTHERS DIMENSION 278*177.8*63.5mm (L*W*H) 3.3Kg; 4pcs/14.2Kg/1.81CUFT PACKING         ℃
   NOTE    
  
  ­ € ‚   ƒ„   …     ­   ­   ƒ        
    †   ‡
 ˆ 
  ­    „ ‰Œ  Š   †   
‚  ‡‹ Ž­      ‡‘‡’ ­   “”‹
  …•• – File Name:RSP-2400-SPEC 2016-02-24 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-RSP-2400-power-supply.html h t t p: / / pow e r. sa ge r. c om MEAN WELL RSP-2400 SERIES 2400 Watt Enclosed with Fan Power Supply 2400W Power Supply with Single Output RSP-2400 series Measures: 10.95 x 7.00 x 2.50”” Block Diagram PFC fosc : 88KHz PWM fosc : 100KHz +S ACTIVE RECTIFIERS RECTIFIERS POWER +V EMI INRUSH I/P & & CURRENT SWITCHING FILTER -V FILTER LIMITING PFC -S PFC O.V.P. CONTROL O.L.P. PWM DETECTION CONTROL O.T.P. CIRCUIT P OK REMOTE RC LOAD CONTROL SHARING CS FAN AUX RECTIFIERS POWER AUX POWER & FILTER Static Characteristics 100 MODEL 12V 24V 48V 90 INPUT 2000.4W 2400W 2400W 80 180~264VAC 166.7A 100A 50A 70 60 50 180 185 190 195 200 210 220 230 240 250 264 INPUT VOLTAGE (V) 60Hz Derating Curve Efficiency vs Load (48V Model) 92 100 90 88 80 86 84 60 50 82 40 80 78 20 76 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% -20 0 10 20 30 40 50 60 70 (HORIZONTAL) LOAD AMBIENT TEMPERATURE (℃) ※ The curve above is measured at 230VAC. File Name:RSP-2400-SPEC 2016-02-24 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-RSP-2400-power-supply.html h t t p: / / pow e r. sa ge r. c om LOAD (%) LOAD (%) EFFICIENCY (%) MEAN WELL RSP-2400 SERIES 2400 Watt Enclosed with Fan Power Supply 2400W Power Supply with Single Output RSP-2400 series Measures: 10.95 x 7.00 x 2.50”” Function Manual 1. Remote Sense ※ The Remote Sense compensates voltage drop on the load wiring up to 0.25V CN2 +V PIN8 +S PIN7 -S +V LOAD -V Sense lines should be twisted in pairs to minimize -V noise pick-up. ※ Caution: The power supply, by factory default(also the assumption for other sections), is shipped with, -S & -V on CN2, as well as +S & +V, shorted by connector. When activating the Remote Sense, the +S signal should be connected to the positive terminal of the load whereas -S signal to the negative terminal. 2. Output Voltage Programming (or, PV / remote voltage programming / remote adjust / margin programming / dynamic voltage trim) ※ In addition to the adjustment via the built-in potentiometer, the output voltage can be trimmed to 20~110%(Typ.) of the nominal voltage by applying EXTERNAL VOLTAGE. CN2 PIN7 -S PIN8 +S +V PIN3 PV EXTERNAL VOLTAGE (DC) -V PIN5 -S ◎ Connecting an external DC source between PV & -S on CN2, and +S & +V, -S & -V also need to be connected as exhibited above. Vout OVP >120% 120 100 100 80 80 Non-Linear MODEL 12V 24V 48V 60 60 PV Range 2.4 ~ 13.2V 4.8 ~ 28V 9.6 ~ 56V 40 40 20 20 V V 12345 6 20 40 60 80 100 120 EXTERNAL VOLTAGE (DC) OUTPUT VOLTAGE (%) ◎ Please do not adopt PWM signal as the EXTERNAL VOLTAGE. ◎ The rated current should change with the Output Voltage Programming accordingly. ※ Caution: (1)By factory default, the Output Voltage Programming is not activated, and PV(PIN3) and PS(PIN4) of CN2 are shorted by connector. Whenever this function is not needed to activate, as assumed in other sections’ diagrams, please keep PV(PIN3) and PS(PIN4) of CN2 shorted ; otherwise, the power supply will have no output. (2)PV(PIN3) and PS(PIN4) of CN1 or CN2 must be disconnected if “Output Voltage Programming” function is used; otherwise, the internal electrical components may be damaged, and the power supply unit may thus be out of order. File Name:RSP-2400-SPEC 2016-02-24 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-RSP-2400-power-supply.html h t t p: / / pow e r. sa ge r. c om OUTPUT VOLTAGE (%) OUTPUT CURRENT (%) MEAN WELL RSP-2400 SERIES 2400 Watt Enclosed with Fan Power Supply 2400W Power Supply with Single Output RSP-2400 series Measures: 10.95 x 7.00 x 2.50”” 3.Remote ON-OFF ※ Remote ON-OFF is activated by the configuration with respect to CN1,CN2 and CN3 as shown in the following diagram. CN2 PIN2 RC PIN1 RCG CN3 PIN7 AUXG PIN8 AUX ◎ By factory default, PV(PIN3) and PS(PIN4) on CN2 are shorted by connector; likewise, OLP(PIN9) and OL-SD(PIN10) on CN3 are shorted when shipped. Example 3.2(A): Using external voltage source AUX 12V 1KΩ RC Internal 12V typ. SW RCG AUXG Example 3.2(B): Using internal 12V auxiliary output AUX 1KΩ RC Internal 12V typ. RCG SW AUXG Example 3.2(C): Using internal 12V auxiliary output AUX 1KΩ 1KΩ RC Internal 12V typ. SW RCG AUXG ◎ Connection Method Example 3.2(A) Example 3.2(B) Example 3.2(C) Power supply output ON SW Open SW Open SW Close SW Logic Power supply output OFF SW Close SW Close SW Open File Name:RSP-2400-SPEC 2016-02-24 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-RSP-2400-power-supply.html h t t p: / / pow e r. sa ge r. c om MEAN WELL RSP-2400 SERIES 2400 Watt Enclosed with Fan Power Supply 2400W Power Supply with Single Output RSP-2400 series Measures: 10.95 x 7.00 x 2.50”” 4.Alarm Signal Output ※ Alarm signal is sent out through "P OK" & "P OK GND" and P OK2 & P OK GND2 pins on CN3. Please acknowledge an external voltage source is required for this function. CN3 PIN3 P OK GND2 PIN4 P OK2 PIN1 P OK GND PIN2 P OK ◎ By factory default, OLP(PIN9) and OL-SD(PIN10) on CN3 are shorted by connector when shipped. Function Description Output of alarm(P OK, Relay Contact) Output of alarm(P OK2, TTL Signal) The signal is "Low" when the power supply is above Low Low 80% of the rated output voltage, or, say, Power OK (0.5V max at 500mA) (0.5V max at 10mA) P OK The signal turns to be "High" when the power supply High or open High or open is under 80% of the rated output voltage, or, say, (External applied voltage, 500mA max.) (External applied voltage, 10mA max.) Power Fail Table 4.1 Explanation of alarm P OK P OK2 R R V 0.1uF V P OK GND External voltage and R P OK GND2 External voltage and R (The max. sink is 500mA and 20V) (The max. sink is 10mA and 30V) Fig. 4.1 Internal circuit of P OK (Relay, total is 10W) Fig. 4.2 Internal circuit of P OK2 (Open collector method) File Name:RSP-2400-SPEC 2016-02-24 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-RSP-2400-power-supply.html h t t p: / / pow e r. sa ge r. c om