MEAN WELL RSP-3000-28MO
Specifications
Manufacturer
MEAN WELL
Manufacturers Part #
RSP-3000-28MO
Factory Pack Quantity
1
Datasheet
Extracted Text
CLICK HERE TO REQUEST PRICE | DELIVERY | SAMPLE | SUPPORT Mean Well RSP-3000 Series 3000 Watt Power Supply 3000W�Single�Output�Power�Supply Measures: 10.95 x 7 x 2.50” RSP-3000 series Western/Midwest Region Eastern Region (866) 588-1750 2390 Owen Street 1900 West Park Drive, Suite 280 www.powergatellc.com Santa Clara, CA 95054 Westborough, MA 01581 Fax (408) 588-1751 sales@powergatellc.com Fax (508) 983-1444 ���������� ��������������������� �������������������������������������� ������������������������� ������������������������������������ ����������������������������������������������������������������������� ����������� ����������������������������������������������������������������� ������������������������������������������������������������������������� � ����������������������������� ����������������������������� �������������������������������������������������� ����������������������������������������������������� ������������������������������ ������������������������������ ���������������� SPECIFICATION MODEL RSP-3000-12 RSP-3000-24 RSP-3000-48 DC�VOLTAGE 12V 24V 48V RATED�CURRENT 200A 125A 62.5A CURRENT�RANGE 0�~�200A 0�~�125A 0�~�62.5A RATED�POWER 2400W 3000W 3000W RIPPLE�&�NOISE�(max.) Note.2 150mVp-p 150mVp-p 200mVp-p OUTPUT VOLTAGE ADJ.�RANGE 22�~�28V 43�~�56V 10.8�~�13.2V VOLTAGE�TOLERANCE Note.3 1.0% 1.0% 1.0% LINE�REGULATION 0.5% 0.5% 0.5% LOAD�REGULATION 0.5% 0.5% 0.5% SETUP,�RISE�TIME 1000ms,�80ms�at�full�load HOLD�UP TIME (Typ.) 10ms�at�full�load VOLTAGE�RANGE 180�~�264VAC����������254�~�370VDC FREQUENCY RANGE 47�~�63Hz POWER�FACTOR (Typ.) 0.95/230VAC�at�full�load INPUT EFFICIENCY (Typ.) 86% 90% 90.5% AC�CURRENT (Typ.) 20A/180VAC����������16A/230VAC INRUSH�CURRENT (Typ.) 60A/230VAC LEAKAGE�CURRENT <2.0mA /�240VAC 100�~�112% rated�output�power OVERLOAD User�adjustable�continuous�constant�current�limiting�or�constant�current�limiting�with�delay�shutdown�after�5�seconds,�re-power�on�to�recover 13.8�~�16.8V 28.8�~�33.6V 57.6�~�67.2V PROTECTION OVER�VOLTAGE Protection�type�:�Shut�down�o/p�voltage,�re-power�on�to�recover 90 5 (12V),�110 5 (24V),�105 5 (48V)���(TSW1:�detect�on�heatsink�of�power�transistor) OVER�TEMPERATURE 90 5 (12V),�85 5 (24V),�75 5 (48V)��(TSW2�:�detect�on�heatsink�of�o/p�diode) Protection�type�:�Shut�down�o/p�voltage,�recovers�automatically�after�temperature�goes�down 12V@0.1A(Only�for�Remote�ON/OFF�control) AUXILIARY POWER(AUX) Please�see�the�Function�Manual REMOTE�ON/OFF�CONTROL Please�see�the�Function�Manual FUNCTION ALARM�SIGNAL OUTPUT 2.4�~�13.2V 4.8�~�28V 9.6�~�56V OUTPUT�VOLTAGE�TRIM CURRENT�SHARING Please�see�the�Function�Manual -20�~�+70 (Refer�to�"Derating�Curve") WORKING�TEMP. 20~90%�RH�non-condensing WORKING�HUMIDITY STORAGE�TEMP.,�HUMIDITY -40�~�+85 ,�10�~�95%�RH ENVIRONMENT TEMP.�COEFFICIENT 0.05%/ (0�~�50 ) 10�~�500Hz,�2G�10min./1cycle,�60min.�each�along�X, Y,�Z�axes VIBRATION SAFETY STANDARDS UL60950-1, TUV�EN60950-1�approved WITHSTAND�VOLTAGE I/P-O/P:3KVAC�����I/P-FG:1.5KVAC�����O/P-FG:0.5KVAC SAFETY & ISOLATION�RESISTANCE I/P-O/P,�I/P-FG,�O/P-FG:100M�Ohms�/�500VDC /�25 /�70%�RH EMC (Note�4) EMC�EMISSION Compliance�to�EN55022�(CISPR22) Class�B,�EN61000-3-2,-3 EMC�IMMUNITY Compliance�to EN61000-4-2,3,4,5,6,8,11,�EN55024,�light�industry�level,�criteria A MTBF 104.5K�hrs�min.������MIL-HDBK-217F�(25 ) OTHERS DIMENSION 278*177.8*63.5mm�(L*W*H) 4Kg;�4pcs/16Kg/1.89CUFT PACKING ����������������������������������������������������������������������������������������� ����������������������� NOTE ���������������������������������������������������������������������������������������������������������������������������������������� ������������������������������������������������������������������������������ ��������������������������������������������������������������������������������������������������������������������������������������������������������� ������������������������������������������������������������������������������������������������������������������������� ����������������������������������������� File�Name:RSP-3000-SPEC���2011-12-19 (866) 588-1750 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product www.powergatellc.com and part number under their unique parameters and environments to ensure a product will work properly and reliably. sales@powergatellc.com CLICK HERE TO REQUEST PRICE | DELIVERY | SAMPLE | SUPPORT Mean Well RSP-3000 Series 3000 Watt Power Supply Measures: 10.95 x 7 x 2.50” Western/Midwest Region Eastern Region 3000W�Single�Output�Power�Supply (866) 588-1750 RSP-3000 series 2390 Owen Street 1900 West Park Drive, Suite 280 www.powergatellc.com Santa Clara, CA 95054 Westborough, MA 01581 Fax (408) 588-1751 sales@powergatellc.com Fax (508) 983-1444 Mechanical�Specification Case�No.982B�����������Unit:mm 278 236.3 27 40 CN1 CN2 CN3 8 6 4 2 8 6 4 2 10 8 6 4 2 7 5 3 1 7 5 3 1 9 7 5 3 1 8-M4(Both�Sides)�L=5mm 236.3 27 OUTPUT 4-M4�L=5mm +V -V CN1 CN2 CN3 8 6 4 2 8 6 4 2 10 8 6 4 2 7 5 3 1 7 5 3 1 9 7 5 3 1 Air�flow direction INPUT 16max. AC�Input Terminal�Pin�No. Assignment Control�Pin�No. Assignment(CN1,CN2)�:�HRS�DF11-8DP-2DS or�equivalent Pin�No. Assignment Pin�No. Assignment Pin�No. Assignment Mating�Housing Terminal 1 AC/L 1 RCG 5,7 -S 2 AC/N 2 RC CS(Current�Share) 6 HRS�DF11-8DS HRS�DF11-**SC or�equivalent or�equivalent 3 PV 8 +S FG 3 4 PS RCG:�Remote�ON/OFF�Ground -S�:�-Remote�Sensing RC���: Remote�ON/OFF�����������������������������������CS:�Load�Share PV����:Output�Voltage�External�Control����������+S:�+Remote�Sensing PS���:�Reference�Voltage Terminal Control�Pin�No. Assignment(CN3)�:�HRS�DF11-10DP-2DS or�equivalent Pin�No. Assignment Pin�No. Assignment Pin�No. Assignment Pin�No. Assignment Mating�Housing Terminal P OK�GND P OK2 AUXG OL-SD 1 4 7 10 HRS�DF11-10DS HRS�DF11-**SC 2 P OK5 RCG8 AUX or�equivalent or�equivalent 3 P OK�GND26 RC9 OLP P OK�GND:�Power�OK�Ground RCG:�Remote�ON/OFF�Ground AUX: Auxiliary�Output P OK:�Power�OK�Signal�(Relay�Contact) RC:�Remote�ON/OFF OLP:�OLP/OL-SD:OLP mode�select P OK2:�Power�OK�Signal�(TTL Signal) AUXG: Auxiliary�Ground PFC�fosc�:�88KHz Block�Diagram PWM�fosc�:�100KHz +S ACTIVE RECTIFIERS RECTIFIERS POWER +V EMI INRUSH I/P & & CURRENT SWITCHING FILTER -V FILTER PFC LIMITING -S PFC O.V.P. CONTROL O.L.P. PWM DETECTION CONTROL O.T.P. CIRCUIT P OK REMOTE RC LOAD CONTROL SHARING CS FAN AUX RECTIFIERS POWER AUX�POWER & FILTER (12V/0.1A) File�Name:RSP-3000-SPEC���2011-12-19 (866) 588-1750 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product www.powergatellc.com and part number under their unique parameters and environments to ensure a product will work properly and reliably. sales@powergatellc.com 162 7.9 38 12.5 13 10 4 20 63.5 177.8 LED SVR + TB1 1 2 3 CLICK HERE TO REQUEST PRICE | DELIVERY | SAMPLE | SUPPORT Mean Well RSP-3000 Series 3000 Watt Power Supply Measures: 10.95 x 7 x 2.50” Western/Midwest Region Eastern Region 3000W�Single�Output�Power�Supply (866) 588-1750 RSP-3000 series 2390 Owen Street 1900 West Park Drive, Suite 280 www.powergatellc.com Santa Clara, CA 95054 Westborough, MA 01581 Fax (408) 588-1751 sales@powergatellc.com Fax (508) 983-1444 Derating�Curve Static�Characteristics Ta=25 100 80 100 60 90 50 80 40 70 20 60 -20 0 10 20 30 40 50 60 70 (HORIZONTAL) 180 185 190 195 200 210 220 230 240 250 264 AMBIENT�TEMPERATURE�( ) INPUT�VOLTAGE�(V)�60Hz Function�Manual 1.Remote�ON/OFF (1)Remote�ON/OFF�control�becomes�available�by�applying�voltage�in�CN1�&�CN2�&�CN3. (2)Table�1.1�shows�the�specification�of�Remote�ON/OFF�function. (3)Fig.1.2�shows�the�example�to�connect�Remote�ON/OFF�control�function. Table�1.1�Specification�of�Remote�ON/OFF Connection�Method Fig.�1.2(A) Fig.�1.2(B) Fig.�1.2(C) Output�on SW�Open SW�Open SW�Close SW�Logic Output�off SW�Close SW�Close SW�Open Fig.1.2�Examples�of�connecting�remote�ON/OFF (A)Using�external�voltage�source (B)Using�internal�12V�auxiliary�output AUX AUX 12V 1K 1K RC RC 12V�typ. 12V�typ. SW RCG RCG SW AUXG AUXG (C)Using�internal�12V�auxiliary�output AUX 1K 1K RC 12V�typ. SW RCG AUXG File�Name:RSP-3000-SPEC���2011-12-19 (866) 588-1750 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product www.powergatellc.com and part number under their unique parameters and environments to ensure a product will work properly and reliably. sales@powergatellc.com LOAD�(%) LOAD�(%) CLICK HERE TO REQUEST PRICE | DELIVERY | SAMPLE | SUPPORT Mean Well RSP-3000 Series 3000 Watt Power Supply 3000W Single Output Power Supply RSP-3000 series Measures: 10.95 x 7 x 2.50” Western/Midwest Region Eastern Region (866) 588-1750 2390 Owen Street 1900 West Park Drive, Suite 280 www.powergatellc.com Santa Clara, CA 95054 Westborough, MA 01581 Fax (408) 588-1751 sales@powergatellc.com Fax (508) 983-1444 2.AlarmSignalOutput (1)Alarm signal is sent out through "POK" & "POK GND" and POK2 & POK GND2 pins. (2)An external voltage source is required for this function. (3)Table 2.1 explain the alarm function built-in the power supply. Function Description Output of alarm(POK, Relay Contact) Output of alarm(POK2,TTLSignal) The signal is "Low" when the power supply isabove Low (0.5V max at 500mA) Low (0.5V max at 10mA) 80% of the rated output voltage-Power OK POK The signal turns to be "High" when the power supply High or open High or open is under 80% of the rated output voltage-Power Fail (External applied voltage, 500mAmax.) (External applied voltage, 10mAmax.) Table 2.1 Explanation of alarm POK POK2 R R V 0.1uF V POK GND POK GND2 External voltage and R External voltage and R (The max. sink is 500mAand 20V) (The max. sink is 10mAand 30V) Fig. 2.2 Internal circuit of POK (Relay, total is 10W) Fig. 2.3 Internal circuit of POK2 (Open collector method) 3.OutputVoltageTRIM (1)Connecting an external DC source between PV & -S on CN1 or CN2, and+S & +V, -S & -V also need to be connected that is shown in Fig. 3.1. (2)Adjustment of output voltage is possible between 20~110%(Typ.) of the rated output which is shown in Fig. 3.2. Reducing output current is requiredwhen the output voltage is trimmed up. Vout OVP>120% 120 +S 100 100 +V LOAD 80 80 -V Non-Linear -S 60 60 PV 40 40 1~6V -S 20 20 V V 1 2 3 4 5 6 20 40 60 80 100 120 Fig. 3.1Add on 1~6V external voltage EXTERNALVOLTAGE(DC) OUTPUTVOLTAGE(%) Fig. 3.2 Output voltage trimming File Name:RSP-3000-SPEC 2011-12-19 (866) 588-1750 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product www.powergatellc.com and part number under their unique parameters and environments to ensure a product will work properly and reliably. sales@powergatellc.com OUTPUTVOLTAGE(%) OUTPUTCURRENT(%) CLICK HERE TO REQUEST PRICE | DELIVERY | SAMPLE | SUPPORT Mean Well RSP-3000 Series 3000 Watt Power Supply 3000W�Single�Output�Power�Supply RSP-3000 Measures: 10.95 x 7 x 2.50” series Western/Midwest Region Eastern Region (866) 588-1750 2390 Owen Street 1900 West Park Drive, Suite 280 www.powergatellc.com Santa Clara, CA 95054 Westborough, MA 01581 Fax (408) 588-1751 sales@powergatellc.com Fax (508) 983-1444 4.Current�Sharing (1)Parallel�operation�is�available�by�connecting�the�units�shown�as�below (+S,-S�and�CS�are�connected�mutually�in�parallel): (2)The�voltage�difference�among�each�output�should�be�minimized�that�less�than 2%�is�required. (3)The�total�output�current�must�not�exceed�the�value�determined�by�the�following�equation. (Output�current�at�parallel�operation)=(The�rated�current�per�unit)�x�(Number�of�unit)�x�0.9 (4)�In�parallel�operation�3�units�is�the�maximum,�please�consult�the�manufacturer�for�other�applications. (5)�When�remote�sensing�is�used�in�parallel�operation,�the�sensing�wire�must�be�connected�only�to�the�master�unit. (6)�Wires�of�remote�sensing�should�be�kept�at�least�10�cm�from�input�wires. No.1(Master) +V CN1 +S -S -V CS +S -S CS CN2 AC/L AC/N +S +V Load -V No.2(Slave) -S +V CN1 +S -S -V CS +S -S CS CN2 AC/L AC/N No.3(Slave) +V CN1 +S -S -V CS +S -S CS CN2 AC/L AC/N (7)�When�in�parallel�operation,�the�minimum�output�load�should�be�greater�than�2%�of�total�output�load. (Min.�Load�>3%�rated�current�per�unit number�of�unit) (8)�Under�parallel�operation,�the�"output�voltage�trim"�function�is�not�available. 5.Select�O.L.P mode (1)Remove�the�shorting�connector�on�CN3�that�is�shown�in�Fig�5.1,�the�O.L.P.�mode�will�be�"continuous�constant�current�limiting". (2)Insert�the�shorting�connector�on�CN3�that�is�shown�in�Fig�5.2,�the�O.L.P.�mode�will�be�"constant�current�limiting�with�delay�shutdown�after�5�seconds, re-power�on�to�recover. OL-SD OL-SD OLP OLP Fig.�5.1�Remove�the�CN3 Fig.�5.2�Insert�the�CN3 OLP Mode�:�constant�current��limiting OLP Mode�:�constant�current��limiting�with�delay�shutdown�after�5�seconds File�Name:RSP-3000-SPEC���2011-12-19 (866) 588-1750 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product www.powergatellc.com and part number under their unique parameters and environments to ensure a product will work properly and reliably. sales@powergatellc.com CLICK HERE TO REQUEST PRICE | DELIVERY | SAMPLE | SUPPORT Mean Well RSP-3000 Series 3000 Watt Power Supply 3000W�Single�Output�Power�Supply RSP-3000 Measures: 10.95 x 7 x 2.50” series Western/Midwest Region Eastern Region (866) 588-1750 2390 Owen Street 1900 West Park Drive, Suite 280 www.powergatellc.com Santa Clara, CA 95054 Westborough, MA 01581 Fax (408) 588-1751 sales@powergatellc.com Fax (508) 983-1444 6.Three�Phase�Connect FIG. A:�3 3W�220VAC�SYSTEM (STANDARD�MODEL FOR�STOCK) R R L1 FG1 N1 S L2 FG2 N2 T L3 FG3 N3 S N (NC) FG T FIG.�B:�3 4W�220/380VAC�SYSTEM R R L1 FG1 N1 S L2 FG2 N2 T L3 N FG3 N3 N S FG T FIG.�C:�3 4W�190/110VAC�SYSTEM R R L1 FG1 N1 S L2 FG2 N2 N (N.C.) T L3 FG3 N3 S (NC) N FG T File�Name:RSP-3000-SPEC���2011-12-19 (866) 588-1750 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product www.powergatellc.com and part number under their unique parameters and environments to ensure a product will work properly and reliably. sales@powergatellc.com 190V 110V 380V 220V 220V 220V
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the RSP-3000-28MO?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Manufacturers







What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods