MEAN WELL RSP-750-24

Mean Well RSP-750 SERIES 750 Watt Enclosed with Fan Power Supply 750W Power Supply with Single Output RSP-750 series Measures: 9.84 x 5.00 x 1.61” ‰  œ – œ †  œ  “ œ  ‘•  —” œ œ —‘•   ■   ■    �‚ƒ

„ �  �­
‚…
 �      �†„ 
 ‡ �„ˆˆ
‰ �Š

‚„
„ˆ ■    �­
ŠŠ �


‹Œ ‰  ŠŽ„ �

 �… 
Š ‚Š‚‚„ �  Š‚
 �­
 �Š„ �€ � Œ ■   €…“ “ –„

ƒ‰Œ
— ˜ ’ƒ 
‚„ Œ  ‰

 
—  ˆ ˆ
Œ  ™Œš„ 

“ — ‚™ ℃ €…“  ‚‚„‹ˆˆ›
„‚
ˆ


  

„„™ ŠŠ™
‹Œ™— ■   
   Š

‚„‘ ’ ’ ’ ’ “’”’• Š

Œ„  File Name:RSP-750-SPEC 2016-03-11 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-RSP-750-power-supply.html h t t p: / / pow e r. sa ge r. c om Mean Well RSP-750 SERIES 750 Watt Enclosed with Fan Power Supply 750W Power Supply with Single Output RSP-750 series Measures: 9.84 x 5.00 x 1.61” SPECIFICATION MODEL RSP-750-5 RSP-750-12 RSP-750-15 RSP-750-24 RSP-750-27 RSP-750-48 DC VOLTAGE 5V 12V 15V 24V 27V 48V RATED CURRENT 100A 62.5A 50A 31.3A 27.8A 15.7A CURRENT RANGE 0 ~ 100A 0 ~ 62.5A 0 ~ 50A 0 ~ 31.3A 0 ~ 27.8A 0 ~ 15.7A RATED POWER 500W 750W 750W 751.2W 750.6W 753.6W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p OUTPUT VOLTAGE ADJ. RANGE 4.75 ~ 5.5V 10 ~ 13.5V 13.5 ~ 16.5V 20 ~ 26.4V 24 ~ 30V 43 ~ 55V VOLTAGE TOLERANCE Note.3 ±2.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±2.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME 1000ms, 50ms at full load HOLD UP TIME (Typ.) 16ms/230VAC 16ms/115VAC at full load VOLTAGE RANGE Note.5 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) 0.97/230VAC 0.98/115VAC at full load INPUT EFFICIENCY (Typ.) 82% 87% 89% 90.5% 90.5% 92% AC CURRENT (Typ.) 5V : 5.6A/115VAC 2.8A/230VAC 12V~48V : 8.2A/115VAC 3.9A/230VAC INRUSH CURRENT (Typ.) 25A/115VAC 40A/230VAC LEAKAGE CURRENT <2.0mA / 240VAC 105 ~ 125% rated output power OVERLOAD Protection type : Constant current limiting, recovers automatically after fault condition is removed 5.75 ~ 6.75V 13.8 ~ 16.8V 17 ~ 20.5V 27.6 ~ 32.4V 31 ~ 36.5V 56.6 ~ 66.2V PROTECTION OVER VOLTAGE (OVP) Protection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, recovers automatically after temperature goes down OVER TEMPERATURE OUTPUT VOLTAGE PROGRAMMABLE(PV) Adjustment of output voltage is allowable to 40 ~ 110% of nominal output voltage. Please refer to the Function Manual. Adjustment of output voltage is allowable to 40 ~ 110% of rated current. Please refer to the Function Manual. OUTPUT CURRENT PROGRAMMABLE(PC) 12V @ 0.1A ; tolerance :±10% FUNCTION AUXILIARY POWER Power on : short between Remote ON-OFF(pin13) & 12V-AUX(pin14) on CN50 Power off : open between Remote ON-OFF(pin13) & 12-AUX(pin14) on CN50 REMOTE ON-OFF CONTROL The TTL signal out, power supply turn on = 0 ~ 1V ; power supply turn off = 3.3 ~ 5.6V DC OK SIGNAL WORKING TEMP. -30 ~ +70℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT ±℃ 0.03%/ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Parameter Standard Test Level / Note Conducted EN55022 (CISPR22) / EN55011 (CISPR11) Class B Radiated EN55022 (CISPR22) / EN55011 (CISPR11) Class B EMC EMISSION Harmonic Current EN61000-3-2 ----- Voltage Flicker EN61000-3-3 ----- SAFETY & EN55024 , EN61204-3, EN61000-6-2 EMC (Note 4) Parameter Standard Test Level / Note ESD EN61000-4-2 Level 3, 8KV air ; Level 2, 4KV contact Radiated EN61000-4-3 Level 3 EFT / Burst EN61000-4-4 Level 3 EMC IMMUNITY Surge EN61000-4-5 Level 4, 2KV/Line-Line 4KV/Line-Earth Conducted EN61000-4-6 Level 3 Magnetic Field EN61000-4-8 Level 4 >95% dip 0.5 periods, 30% dip 25 periods, Voltage Dips and Interruptions EN61000-4-11 >95% interruptions 250 periods MTBF 336.9K hrs min. Telcordia SR-332 (Bellcore) ; 109.1K hrs min. MIL-HDBK-217F (25℃℃ )7F (25 ) OTHERS DIMENSION 250*127*41mm (L*W*H) 1.64Kg; 6pcs/10.8Kg/1.1CUFT PACKING         ℃
   NOTE    
  
  ­ €‚    ƒ„   …     ­   ­   ƒ        
    †   ‡
 ˆ 
  ­    „ ‰Œ  Š   †   
‚  ‡‹ Ž­      ‡‘‡’ ­   “”‹
  …•• – — ­
    ‹­˜ Š  ­ ‹ Œ  ­ 
­­  ­‹‹­   ˜‹­  ­ ‹­‹‹­‹­     ’ ­­      ˜‹­ ‹  ™   ‹­‹  File Name:RSP-750-SPEC 2016-03-11 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-RSP-750-power-supply.html h t t p: / / pow e r. sa ge r. c om Mean Well RSP-750 SERIES 750 Watt Enclosed with Fan Power Supply 750W Single Output Power Supply RSP-750 series Measures: 9.84 x 5.00 x 1.61” Block Diagram PFC fosc : 90KHz PWM fosc : 70KHz +S ACTIVE RECTIFIERS RECTIFIERS EMI POWER +V INRUSH I/P & & CURRENT SWITCHING FILTER -V LIMITING PFC FILTER -S O.L.P. DETECTION PFC PWM DC OK CIRCUIT CONTROL CONTROL PV O.V.P. RECTIFIERS REMOTE ON-OFF CONTROL ON/OFF FAN AUX AUX POWER(12V/0.1A) RECTIFIERS POWER & AUX GND FILTER Static Characteristics MODEL 100 5V 12V 15V INPUT 90 500W 750W 750W 100~264VAC 100A 62.5A 50A 80 450W 675W 675W 70 90VAC 90A 56.25A 45A 60 MODEL 24V 27V 48V INPUT 50 751.2W 750.6W 753.6W 40 100~264VAC 31.3A 27.8A 15.7A 90 95 100 115 264 676.08W 675.54W 678.24W 90VAC 28.17A 25.02A 14.13A INPUT VOLTAGE (VAC) 60Hz Efficiency vs Load (48V Model) Derating Curve 95 100 90 80 85 60 230V 50 80 40 75 20 70 -30 0 10 20 30 40 50 60 70 (HORIZONTAL) 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% AMBIENT TEMPERATURE (℃) LOAD ※ The curve above is measured at 230VAC. File Name:RSP-750-SPEC 2016-03-11 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-RSP-750-power-supply.html h t t p: / / pow e r. sa ge r. c om LOAD (%) LOAD (%) EFFICIENCY (%) Mean Well RSP-750 SERIES 750 Watt Enclosed with Fan Power Supply 750W Single Output Power Supply RSP-750 series Measures: 9.84 x 5.00 x 1.61” Function Manual 1.Remote Sense The remote sensing compensates voltage drop on the load wiring up to 0.5V. CN50 1 3 5 7 13 REMOTE +S -S PV PC DC_OK GND ON-OFF TB1 CN50 +VS -VS PS PO GND G-AUX 12V-AUX 1 13 28 4 6 14 2 14 -V +V LOAD PIN1 +S PIN3 -S - + Fig 1.1 ◎ The +S signal should be connected to the positive terminal of the load whereas -S signal to the negative terminal. ◎ By factory default, on CN50, Remote ON-OFF (pin13) and 12V-AUX (pin14), PV(pin5) and PS (pin6), and PC (pin7) and PO (pin8, respectively, are shorted when shipped. The power supply will have no output if the shorting connector is not assembled unless certain functin needs to be activated. 2.Remote ON-OFF ※ The power supply can be turned ON/OFF by using the “Remote ON-OFF” function. CN50 13 57 13 TB1 REMOTE CN50 +S -S PV PC DC_OK GND SW ON-OFF 1 13 +VS -VS PS PO GND G-AUX 12V-AUX 24 68 14 2 14 -V +V LOAD - + Fig 2.1 Between Remote ON-OFF(pin13) and 12V-AUX(pin14) Power Supply Status SW close (Short) ON SW open (Open) OFF ◎ When multiple power supplies need to turn ON/OFF simultaneously by Remote ON-OFF control, -S & -V on CN50, as well as +S & +V, on each power supply should be connected. File Name:RSP-750-SPEC 2016-03-11 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-RSP-750-power-supply.html h t t p: / / pow e r. sa ge r. c om Mean Well RSP-750 SERIES 750 Watt Enclosed with Fan Power Supply 750W Single Output Power Supply RSP-750 series Measures: 9.84 x 5.00 x 1.61” 3. Output Voltage Programming (or, PV / remote voltage programming / remote adjust / margin programming / dynamic voltage trim) ※ In addition to the adjustment via the built-in potentiometer, the output voltage can be trimmed to 40~110% of the nominal voltage by applying EXTERNAL VOLTAGE. OVP 120%(Typ.) Vout 120 110 External Voltage (2~5.5VDC) 100 80 Non-Linear CN50 13 57 11 13 60 REMOTE +S -S PV PC DC_OK GND ON-OFF 40 +VS -VS PS PO GND G-AUX 12V-AUX 20 UVP 10%(Typ.) 24 8 14 PV(Referenced to GND) 1 2 3 4 5 5.5 6 EXTERNAL VOLTAGE (VDC) Fig 3.1 ◎ If EXTERNAL VOLTAGE (VDC) <0.5V,the power supply may enter under voltage protection; it needs to be restarted to work. ※ Caution: By factory default, the Output Voltage Programming is not activated, and PV (pin5) and PS(pin6) are shorted by connector. Whenever this function is not needed to activate, as assumed in other sections’ diagrams, please keep PV (pin5) and PS(pin6) shorted ; other wise, the power supply will have no output. 4. Output Current Programming (or, PC / remote current programming / dynamic current trim) ※ The output current can be trimmed to 40~110% of the rated current by applying EXTERNAL VOLTAGE. Io 115%(Typ.) Io 120 110 External Voltage (2~5.5VDC) 100 13 5 7 CN50 11 13 80 Non-Linear REMOTE +S -S PV PC DC_OK GND ON-OFF 60 +VS -VS PS PO GND G-AUX 12V-AUX 40 24 6 14 20 PC(Referenced to GND) 1 2 3 4 5 5.5 6 EXTERNAL VOLTAGE (VDC) Fig 4.1 ※ Caution: By factory default, the Output Current Programming is not activated, and PC(pin7) and PO(pin8) are shorted by connector. Whenever this function is not needed to activate, as assumed in other sections’ diagrams, please keep PC(pin7) and PO(pin8) shorted ; otherwise, the power supply will have no output. TB1 CN50 1 13 2 14 -V +V LOAD - + File Name:RSP-750-SPEC 2016-03-11 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-RSP-750-power-supply.html h t t p: / / pow e r. sa ge r. c om OUTPUT VOLTAGE (%) OUTPUT CURRENT (%)