MEAN WELL RST-10000-48

GL OBAL POWER SOL UTIONS MEAN WELL GL OBAL POWER SOL UTIONS RST-10000 Series 10,000 Watt Power Supply 10000W Single Output Power Supply RS T-100 00 series Measures: 21.26 x 16.70 x 3.29” Bauartgepruft Sicherheit egelma ge od o s bewac g www.tuv.com ID 2000000000 ■ Features ■ Applications ‧3ψ 3-wire / △ 196~305VAC or 3ψ 4-wire / Y 340~530VAC ‧Industrial control equipments wide input range ‧ Automation equipments ‧Built-in active PFC function ‧ Laser engravers ‧High efficiency up to 91% ‧ Telecommunication systems ‧Protections: Short circuit / Overload / Over voltage / Over temperature / Fan fail ‧Forced air cooling by built-in fan with speed control function ‧Output voltage can be trimmed between 20~120% by 1~6VDC external control signal ‧Output current can be trimmed between 20~100% by 1~5VDC external control signal ‧Current sharing up to 2 units ‧Alarm signal output (relay contact and open collector signal): AC fail, DC OK, fan fail, OTP ‧Built-in 12V/0.1A auxiliary output for remote control ‧Built-in remote ON/OFF control ‧Built-in remote sense function ‧5 years warranty ■ Description RST-10000 is one 10000W single output enclosed type AC/DC power supply series. This series accepts the wide range 3-phase AC input (3ψ△ 3-wire / 196~305VAC or 3ψ 4-wire / Y 340~530VAC) and supplies 24VDC,36VDC and 48VDC at the output. RST-10000 particularly provides the wide range adjustment function for output voltage and current by means of an external control signal; moreover, RST-10000 offers two overload protection mechanisms, the “continuous constant current limiting” mode and the “constant current limiting with delay shutdown after 5 seconds” mode, well providing the flexibility for high power system design. RST-10000 has the built-in active PFC function and the working efficiency is high up to 91%. With the built- in fan, the entire series can supply the full load output under 50℃ ambient temperature. The parallel function is built to transmit an even higher power with up to 2 units. Other functions include the remote sense function, the 12V/0.1A auxiliary power, the alarm signal output (both relay contact and open collector signal) for AC fail, DC OK, fan fail and over temperature protection, and etc. RST-10000 series acquires the major global safety regulation certificates. ■ Model Encoding Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. RST - 10000- 24 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 Output voltage sales@powergatellc.com http://www.powergatellc.com/mean-well-rst-10000-power-supply.html ww w. po w ergatellc . c o m Output wattage Series name File Name:RST-10000-SPEC 2014-11-03 GL OBAL POWER SOL UTIONS MEAN WELL GL OBAL POWER SOL UTIONS RST-10000 Series 10,000 Watt Power Supply 10000W Single Output Power Supply RS T- 100 00 ser ies Measures: 21.26 x 16.70 x 3.29” SPECIFICATION MODEL RST-10000-24 RST-10000-36 RST-10000-48 DC VOLTAGE 24V 36V 48V RATED CURRENT 400A 276A 210A CURRENT RANGE 0 ~ 400A 0 ~ 276A 0 ~ 210A RATED POWER 9600W 9936W 10080W RIPPLE & NOISE (max.) Note.2 150mVp-p 200mVp-p 200mVp-p OUTPUT VOLTAGE ADJ. RANGE Note.4 23.5 ~ 28.8V 35 ~ 43.2V 47 ~ 57.6V VOLTAGE TOLERANCE Note.3 ±1.0% ±1.0% ±1.0% LINE REGULATION ±0.5% ±0.5% ±0.5% LOAD REGULATION ±0.5% ±0.5% ±0.5% SETUP, RISE TIME 2200ms, 80ms at full load HOLD UP TIME (Typ.) 20ms / 230VAC at 75% load 14ms / 230VAC at full load VOLTAGE RANGE 3ψ△ 3-wire / 196 ~ 305VAC or 3ψ 4-wire / Y 340 ~ 530VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) 0.95/230VAC(400VAC) at full load INPUT EFFICIENCY (Typ.) 89% 90% 91% AC CURRENT (Typ.) 30A/230VAC(3ψ△ 3-wire / ) 18A/400VAC(3ψ 4-wire / Y) INRUSH CURRENT (Typ.) 100A/△230VAC(Y 400VAC) LEAKAGE CURRENT <7mA /△305VAC(Y 530VAC) 100 ~ 112% rated output power OVERLOAD User adjustable continuous constant current limiting or constant current limiting with delay shutdown after 5 seconds, re-power on to recover PROTECTION 30 ~ 33.6V 45 ~ 50.4V 60 ~ 67.2V OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down 12V@0.1A(Only for Remote ON/OFF control) AUXILIARY POWER(AUX) Please refer to the Function Manual REMOTE ON/OFF CONTROL ALARM SIGNAL OUTPUT Please refer to the Function Manual FUNCTION OUTPUT VOLTAGE TRIMMING Adjustment of output voltage is allowable between 20 ~ 120% by 1 ~ 6VDC external control signal OUTPUT CURRENT TRIMMING Adjustment of output current is allowable between 20 ~ 100% by 1 ~ 5VDC external control signal CURRENT SHARING Please refer to the Function Manual -30 ~ +70℃ (Refer to "Derating Curve") WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH TEMP. COEFFICIENT ±℃ 0.03%/ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved WITHSTAND VOLTAGE Note.5 I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE Note.5 I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH EMC (Note 6) EMC EMISSION Compliance to EN55022 (CISPR22) Class A, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria A MTBF 18.7K hrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 540*424*83.5mm (L*W*H) 23.5Kg; 1pcs/23.5Kg/2.45CUFT PACKING 1. All parameters NOT specially mentioned are measured at △230VAC(Y 400VAC) input, rated load and 25℃ of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Adjusted through potentiometer. 5. During withstandards voltage and isolation resistance testing, the screw “A” shall be temporarily removed, and shall be istalled back after the testing. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 sales@powergatellc.com http://www.powergatellc.com/mean-well-rst-10000-power-supply.html ww w. po w ergatellc . c o m File Name:RST-10000-SPEC 2014-11-03 GL OBAL POWER SOL UTIONS MEAN WELL GL OBAL POWER SOL UTIONS RST-10000 Series 10,000 Watt Power Supply 10000W Single Output Power Supply RS T-100 00 series Measures: 21.26 x 16.70 x 3.29” Block Diagram PFC fosc : 70KHz PWM fosc : 100KHz +S RECTIFIERS RECTIFIERS POWER EMI +V I/P & & FILTER SWITCHING -V PFC FILTER -S DETECTION O.T.P. PFC CIRCUIT FG CONTROL CURRENT CONTROL LIMIT CIRCUIT O.V.P. CS PV PC RC ISOLATOR DC-OK & AC-FAIL RELAY FAN-FAIL OTP RECTIFIERS AUX AUX POWER & POWER (+12V/0.1A) FILTER FAN Derating Curve Static Characteristics 100 80 100 60 90 50 80 40 70 20 60 -30 0 10 20 30 40 50 60 70 (HORIZONTAL) 3ψ△ 196 210 220 230 240 250 260 270 280 290 305 3Y ψ 340 360 380 400 420 440 460 480 500 515 530 AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (V) 60Hz File Name:RST-10000-SPEC 2014-11-03 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 sales@powergatellc.com http://www.powergatellc.com/mean-well-rst-10000-power-supply.html ww w. po w ergatellc . c o m GL OBAL POWER SOL UTIONS MEAN WELL GL OBAL POWER SOL UTIONS RST-10000 Series 10,000 Watt Power Supply 10000W Single Output Power Supply RS T-100 00 series Measures: 21.26 x 16.70 x 3.29” Function Description of CN992, 993 Pin No. Function Description 1 CS- Current sharing signal. When units are connected in parallel, the CS pins of the units should be connected to allow current balance between units. Please refer to the Function Manual section for details. 2 CS+ 3 +S The +S signal should be connected to the positive terminal of the load. The +S and -S leads should be twisted in pair to minimize noise pick-up effect. The maximum line drop compensation is 0.5V. 5 -S 4 PV- Connect to external DC voltage source for output voltage trimming. Output voltage can be trimmed between 20 ~ 120% of the rated output voltage. Please refer to the Function Manual section for details. 6 PV+ 7 PC- Connect to external DC voltage source for output current trimming. Output current can be trimmed between 20 ~ 100% of the rated output current. Please refer to the Function Manual section for details. 9 PC+ 8 RC- The output can be turned ON/OFF by the electrical signal between RC+ and RC-. Please refer to the Function Manual section for details. 10 RC+ Function Description of CN991 Pin No. Function Description Auxiliary voltage output, 11.4~12.6V, referenced to pin 3(GND-AUX). 12V-AUX 1 The maximum load current is 0.1A. This output is not controlled by the "Remote ON/OFF" function. 2 DC-OK2-GND Alarm signal of DC-OK. Open collector signal. Low when the PSU turns on. The maximum sink current is 10mA and the maximum external voltage is 20V. 4 DC-OK2 Auxiliary voltage output GND. GND-AUX 3 The signal return is isolated from the output terminals (+V & -V). PSU output +V signal. 5 +V Alarm signal of AC fail. 6 AC-FAIL2-GND Open collector signal. Low when the PSU input voltage is too low. The maximum sink current is 10mA and the maximum external AC-FAIL2 voltage is 20V. 8 -V 7 PSU output -V signal. Alarm signal of OTP. 9 OTP2 Open collector signal. Low when the PSU over temperature protection occurs. The maximum sink current is 10mA and the maximum 11 OTP2-GND external voltage is 20V. FAN-FAIL2 10 Alarm signal of fan fail. Open collector signal. Low when the internal fan fails. The maximum sink current is 10mA and the maximum external voltage is 20V. 12 FAN-FAIL2-GND Alarm signal of OTP. 13 OTP1 Normally open contact. "Short" when the PSU over temperature protection occurs. Relay contact rating(maximum) is 30V/1A 15 OTP1-GND resistive. 14 DC-OK1 Alarm signal of DC-OK. Normally open contact. "Short" when the PSU turns on. Relay contact rating(maximum) is 30V/1A resistive. DC-OK1-GND 16 17 AC-FAIL1-GND Alarm signal of AC-fail. Normally open contact. "Short" when the PSU input voltage is too low. Relay contact rating(maximum) is 30V/1A resistive. AC-FAIL1 19 18 FAN-FAIL1-GND Alarm signal of fan fail. Normally open contact. "Short" when the internal fan fails. Relay contact rating(maximum) is 30V/1A resistive. FAN-FAIL1 20 Function Manual 1. Remote ON/OFF Control The PSU can be turned ON/OFF by using the "Remote ON/OFF" function. SW 12V-AUX Between ON/OFF(CN992 or CN993 pin10) and 12V-AUX(CN991 pin1) Output Status RC+ RST-10000 SW close (Short) PSU ON RC- GND-AUX SW open (Open) PSU OFF Table 1.1 Fig 1.1 File Name:RST-10000-SPEC 2014-11-03 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 sales@powergatellc.com http://www.powergatellc.com/mean-well-rst-10000-power-supply.html ww w. po w ergatellc . c o m GL OBAL POWER SOL UTIONS MEAN WELL GL OBAL POWER SOL UTIONS RST-10000 Series 10,000 Watt Power Supply 10000W Single Output Power Supply RS T-100 00 series Measures: 21.26 x 16.70 x 3.29” 2. Remote Sense The remote sense function compensates the voltage drop on the cable, between the PSU and the load, up to 0.3V. If the remote sense function is not required, +S and +V, as well as -S and -V, need to be connected to be free from noise and interference. (+S and +V, -S and -V are connected as factory default setting) +V +V +S RST-10000 LOAD -S -V -V Senselinesshouldbetwistedinpairs Fig 2.1 3. Select PV mode (Output Voltage Trimming) 1 2 3 (1) SVR mode ON OFF (a)Have the DIP switch position-3 set as (b)O utput voltage can be trimmed by SVR. 1 2 3 (2) PV mode ON OFF (a)Have the DIP switch position-3 set as (b) Connect an external DC source between PV+ and PV- on CN992 or CN993. (c) +S and +V, as well as -S and -V, need to be connected as shown in Fig 3.1. (d) Trimming of output voltage is allowed between 20~120%(Typ.) of the rated output voltage as is shown in Fig 3.2. Vout +S 120 +V LOAD 100 -V RST-10000 -S 80 PV+ Non-Linear 1~6V 60 PV- 40 Fig 3.1 20 V 1 2 3 4 5 6 4. Select PC Mode (Output Current Trimming) 1 2 3 EXTERNALVOLTAGE(VDC) (1) Default OLP value ON OFF Fig 3.2 (a)Have the DIP switch position-2 set as (b) Output current is set default value. 1 2 3 (2) PC mode ON OFF (a)Have the DIP switch position-2 set as (b)Connect an external voltage source between PC+ and PC- on CN992 or CN993 as shown in Fig 4.1. (c)T rimming of output current is allowed between 20~100%(Typ.) of the rated output current as shown in Fig 4.2. Iout +S 100 +V LOAD -V 80 RST-10000 -S Non-Linear 60 PC+ 1~5V PC- 40 Fig 4.1 20 V 1 2 3 4 5 EXTERNALVOLTAGE(VDC) Fig 4.2 File Name:RST-10000-SPEC 2014-11-03 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 sales@powergatellc.com http://www.powergatellc.com/mean-well-rst-10000-power-supply.html ww w. po w ergatellc . c o m GL OBAL POWER SOL UTIONS MEAN WELL GL OBAL POWER SOL UTIONS RST-10000 Series 10,000 Watt Power Supply 10000W Single Output Power Supply RS T-100 00 series Measures: 21.26 x 16.70 x 3.29” 5. Select OLP Mode 1 2 3 (1) Continuous Constant Current mode ON Have the DIP switch position-1 set as O F , F and RST-10000 will work in continuous constant current mode when the output is overloaded or short-circuited. 1 2 3 (2) Delay Shutdown mode ON Have the DIP switch position-1 set as O F , F and RST-10000 will shut down after 5 seconds of constant current operation, when the output is overloaded or short-circuited. 6. Front Panel Indicators LED Description GREEN(LED1) LED on when output voltage is OK RED(LED2) LED on when any protection occurs Table 6.1 7. Alarm Signal Output There are 4 alarm signals on CN991, and each signal can select two types of output circuit. (1) Relay contact output Normally open contact. "Short" when the alarm arises. Relay contact rating(maximum) is 30V/1A resistive. R V Fig 7.1 (2) Open collector output An external voltage source is required for this function that is shown in Fig 7.2. These signals are isolated from output. The maximum sink current is 10mA and the maximum external voltage is 20V (there is a built-in 24V zener diode in inner circuitry). 10KΩx4pcs 12V-AUX DC-OK2 DC-OK2-GND AC-FAIL2 RST-10000 AC-FAIL2-GND Application OTP2 Circuit OTP2-GND FAN-FAIL2 FAN-FAIL2-GND GND-AUX Fig 7.2 File Name:RST-10000-SPEC 2014-11-03 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 sales@powergatellc.com http://www.powergatellc.com/mean-well-rst-10000-power-supply.html ww w. po w ergatellc . c o m GL OBAL POWER SOL UTIONS MEAN WELL GL OBAL POWER SOL UTIONS RST-10000 Series 10,000 Watt Power Supply 10000W Single Output Power Supply RS T-100 00 series Measures: 21.26 x 16.70 x 3.29” 8. Current Sharing (1) Parallel operation is available by connecting the units shown as follows. (+S,-S and CS+, CS- and RC+, RC- are connected mutually in parallel.) (2) The voltage difference among each output should be minimized that less than 0.2V is required. (3) The total output current must not exceed the value determined by the following equation. (Output current at parallel operation)=(The rated current per unit)x(Number of unit)x0.9 (4) In parallel operation 2 units is the maximum, please consult the manufacturer for other applications. (5) When the remote sense function is used in parallel operation, the sensing wire must be connected only to the master unit. (6) Wires of the remote sense function should be kept at least 30 cm from input wires. (7) When in parallel operation, the minimum output load should be greater than 5% of the total output load. (Min. Load) >(5% rated current per unit) x (number of unit) CN991 CN991 12V 12V -AUX -AUX GND G ND -AUX -AUX CN992 CN992 CS+ CS+ CS- CS- +S +S -S -S RC+ RC+ RC- RC- CN993 CN993 CS+ CS+ CS- CS- +S +S -S -S RC+ RC+ RC- RC- +V +V +S +V Load -V -S -V -V File Name:RST-10000-SPEC 2014-11-03 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 sales@powergatellc.com http://www.powergatellc.com/mean-well-rst-10000-power-supply.html ww w. po w ergatellc . c o m GL OBAL POWER SOL UTIONS MEAN WELL GL OBAL POWER SOL UTIONS RST-10000 Series 10,000 Watt Power Supply 10000W Single Output Power Supply RS T-100 00 series Measures: 21.26 x 16.70 x 3.29” 9. AC Power Connection ◎ψ 3 3-wire / △ 230VAC T RST-10000 N3 L3 N2 L2 N1 L1 S FG R Fig 9.1 ◎ψ 3 4-wire / Y 400VAC T RST-10000 N3 L3 N2 N L2 N1 L1 S FG R Fig 9.2 File Name:RST-10000-SPEC 2014-11-03 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 sales@powergatellc.com http://www.powergatellc.com/mean-well-rst-10000-power-supply.html ww w. po w ergatellc . c o m GL OBAL POWER SOL UTIONS MEAN WELL GL OBAL POWER SOL UTIONS RST-10000 Series 10,000 Watt Power Supply 10000W Single Output Power Supply RS T-100 00 series Measures: 21.26 x 16.70 x 3.29” Mechanical Specification Case No.234A Unit:mm 540 488 21 CN993 CN992 CN991 1 3 5 7 9 1 3 5 7 9 1 3 5 7 9 1113 15 17 19 2 4 6 8 10 2 4 6 8 10 2 4 6 8 1012 14 16 18 20 4-M4 L=5mm 68.75 7.4 405 102.9 + 8-M4 L=5mm 60 +V Air flow direction -V TB1 1 2 3 4 5 6 22max 7.1 7 540 488 21 4-M4 L=5mm Screw "A" Terminal Pin No. Assignment Control Pin No. Assignment(CN992,CN993) : HRS DF11-10DP-2DS or equivalent Pin No. Assignment Pin No. Assignment Pin No. Assignment Pin No. Assignment Mating Housing Terminal 1 AC/L1 4 AC/N2 CS- PV+ 1 6 2 AC/N1 5 AC/L3 2 CS+ PC- 7 HRS DF11-10DS HRS DF11-**SC 3 AC/L2 6 AC/N3 3 +S 8 RC- or equivalent or equivalent 4 PV- 9 PC+ 5 -S 10 RC+ Control Pin No. Assignment(CN991) : HRS DF11-20DP-2DS or equivalent Mating Housing Terminal Pin No. Assignment Pin No. Assignment Pin No. Assignment Pin No. Assignment 12V-AUX AC-FAIL2-GND OTP2-GND DC-OK1-GND 1 6 11 16 2 DC-OK2-GND -V 12 FAN-FAIL2-GND AC-FAIL1-GND 7 17 HRS DF11-20DS HRS DF11-**SC GND-AUX 8 AC-FAIL2 OTP1 18 FAN-FAIL1-GND 3 13 or equivalent or equivalent DC-OK2 9 OTP2 DC-OK1 19 AC-FAIL1 4 14 +V 10 FAN-FAIL2 OTP1-GND 20 FAN-FAIL1 5 15 DIP Switch Position Assignment(DIP-SW): Please refer to the Function Manual. Position Assignment Position Assignment 1 2 3 ON DIP-SW PIN2:PC 1 OLP mode 3 PV mode OFF DIP-SW PIN3:PV 2 PC mode Installation Manual Please refer to : http://www.meanwell.com/webnet/search/InstallationSearch.html File Name:RST-10000-SPEC 2014-11-03 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 sales@powergatellc.com http://www.powergatellc.com/mean-well-rst-10000-power-supply.html ww w. po w ergatellc . c o m