MEAN WELL S-100

100W Single Output Switching Power Supply S-100 s e ri e s Features : AC input range selectable by switch Protections: Short circuit / Overload Cooling by free air convection 100% full load burn-in test Fixed switching frequency at 25KHz Low cost High reliability 1 year warranty SPECIFICATION MODEL S-100-3 S-100-5 S-100-7.5 S-100-10 S-100-12 S-100-15 S-100-18 S-100-24 S-100-27 S-100-36 S-100-48 DC VOLTAGE 3V 5V 7.5V 10V 12V 15V 18V 24V 27V 36V 48V RATED CURRENT 20A 20A 13.6A 10A 8.5A 6.7A 5.6A 4.5A 3.7A 2.7A 2A CURRENT RANGE 0 ~ 20A 0 ~ 20A 0 ~ 13.6A 0 ~ 10A 0 ~ 8.5A 0 ~ 6.7A 0 ~ 5.6A 0 ~ 4.5A 0 ~ 3.7A 0 ~ 2.7A 0 ~ 2A RATED POWER 60W 100W 102W 100W 102W 100.5W 100.8W 108W 99.9W 97.2W 96W RIPPLE & NOISE (max.) Note.2 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p OUTPUT VOLTAGE ADJ. RANGE 2.85 ~ 3.3V 4.75 ~ 5.5V 6.75 ~ 8.25V 9 ~ 11V 10.8 ~ 13.2V 13.5 ~ 16.5V 16.2 ~ 19.8V 21.6 ~ 26.4V 26 ~ 32V 32.4 ~ 39.6V 43.2 ~ 52.8V VOLTAGE TOLERANCE Note.3 2.0% 2.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.3% 0.3% 0.3% 0.3% 0.2% 0.2% 0.2% 0.2% LOAD REGULATION 0.5% 0.5% 0.5% 0.3% 0.3% 0.3% 0.3% 0.2% 0.2% 0.2% 0.2% SETUP, RISE TIME 200ms, 80ms at full load HOLD UP TIME (Typ.) 24ms at full load VOLTAGE RANGE 85 ~ 132VAC/180 ~ 264VAC selected by switch 255 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 70% 78% 80% 80% 81% 81% 82% 84% 84% 84% 84% INPUT 1.9A/115VAC 0.96A/230VAC AC CURRENT (Typ.) INRUSH CURRENT (Typ.) COLD START 27A/115VAC 54A/230VAC LEAKAGE CURRENT <1mA / 240VAC 105 ~ 150% rated output power (130 ~ 180% of rated output power for S-100-5, S-100-36 ; 150 ~ 200% of rated output power for S-100-7.5 ) PROTECTION OVERLOAD Protection type : Shut down o/p voltage, re-power on to recover -10 ~ +60 (Refer to output load derating curve) WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT -20 ~ +85 , 10 ~ 95% RH STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 0.03%/ (0 ~ 50 VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes Design refer to UL1012 SAFETY STANDARDS WITHSTAND VOLTAGE I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Design refer to FCC Part15 J Conduction Class B MTBF 322.4K hrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION 199*98*38mm (L*W*H) 0.62Kg; 20pcs/13.6Kg/0.8CUFT PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. File Name:S-100-SPEC 2008-04-10 3.5 3.5 3-M3 100W Single Output Switching Power Supply S-100 s e ri e s Mechanical Specification Case No. 902 Unit:mm 197 1 2 3 4 5 6 7 57.5 120 4.5 199 6.5 190 Terminal Pin No. Assignment Pin No. Assignment Pin No. Assignment 1 AC/L 4,5 DC OUTPUT -V 2 AC/N 6,7 DC OUTPUT +V 3 FG 22 157 Block Diagram fosc : 25KHz 230 115 RECTIFIERS RECTIFIERS EMI POWER +V I/P & & FILTER SWITCHING -V FILTER FILTER O.C.P. FG PWM DRIVER CONTROL Derating Curve Static Characteristics (24V) Ta=25 350 32 S-100-12~48 100 300 28 80 S-100-3.3,5 250 24 S-100-7.5 20 200 60 150 16 40 12 100 20 8 50 -10 0 10 20 30 40 50 60 (VERTICAL) 80 85 90 95 100 105 110 115 120 125 130 -10 0 45 55 (HORIZONTAL) 160 170 180 190 200 210 220 230 240 250 260 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) 60Hz File Name:S-100-SPEC 2008-04-10 4-M3 9 8.2 9.5 12 LOAD (%) 18 9 80 OUTPUT VOLTAGE (V) 18 9.5 3.5 3.5 28.5 85.5 7 38 98 OUTPUT RIPPLE (mVp-p)