MEAN WELL SD-500 SERIES 500 Watt Chassis Mount DC-DC Converter 500W Single Output DC-DC Converter SD-500 series Measures: 8.46 x 4.53 x 1.97” ■“ ‰ �  ’ „   „ �› ‰œ
‰   „—
‰œ‡
‰‡
œ ™ �š ‰žƒ ˜’˜’’„˜’  ˜•  — ™ �
•˜• �“ „ †  ‚ƒ    �  Ÿž„  �¡ † †““  �¡ †    �ˆ‚  SPECIFICATION MODEL SD-500L-12 SD-500L-24 SD-500L-48 SD-500H-12 SD-500H-24 SD-500H-48 DC VOLTAGE 12V 24V 48V 12V 24V 48V RATED CURRENT 40A 21A 10.5A 40A 21A 10.5A CURRENT RANGE 0 ~ 40A 0 ~ 21A 0 ~ 10.5A 0 ~ 40A 0 ~ 21A 0 ~ 10.5A RATED POWER 480W 504W 504W 480W 504W 504W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p OUTPUT VOLTAGE ADJ. RANGE 11 ~ 15V 23 ~ 30V 46 ~ 60V 11 ~ 15V 23 ~ 30V 46 ~ 60V VOLTAGE TOLERANCE Note.3 ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME 500ms, 50ms at full load 72 ~ 144VDC VOLTAGE RANGE Note.5 19 ~ 72VDC EFFICIENCY (Typ.) 86% 88% 89% 87% 89% 90% INPUT DC CURRENT (Typ.) 24.2A/19VDC 24.8A/24VDC 12A/48VDC 8A/72VDC 6A/96VDC CURRENT (AT NO LOAD) Max. 0.2A/48VDC Max. 0.1A/96VDC INRUSH CURRENT (Typ.) 60A/48VDC 60A/96VDC 105 ~ 125% rated output power OVERLOAD Protection type : Constant current limiting, shut down o/p voltage after about 5 sec., re-power on to recover 16 ~ 19V 30.8 ~ 35.2V 62 ~ 68V 16 ~ 19V 30.8 ~ 35.2V 62 ~ 68V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, recovers automatically after temperature goes down OVER TEMPERATURE Please refer to function manual REMOTE ON/OFF CONTROL FUNCTION OUTPUT OK SIGNAL Open collector signal low when PSU turns on, max. sink current :10mA -20 ~ +60℃ (Refer to "Derating Curve") WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH TEMP. COEFFICIENT ±℃ 0.02%/ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS IEC60950-1 CB approved by TUV WITHSTAND VOLTAGE I/P-O/P:2KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH EMC (Note 4) EMC EMISSION Compliance to EN55022 (CISPR22) Class B EMC IMMUNITY Compliance to EN61000-4-2,3,4,6,8, light industry level, criteria A MTBF 196.3K hrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 215*115*50mm (L*W*H) 1.15Kg; 12pcs/14.8Kg/0.92CUFT PACKING        
℃   NOTE
  
 ­€ ‚ƒ  „
… ‚†‚ ‚ƒ   ‡   ˆ ‰     „   „   ƒ‚    ‚ƒƒ‚    Š  ƒ‹  Œ   „ƒ   ˆ ˆ Ž ‚ƒƒ‘ ƒ Š   † ƒ‹ ’ “„   ƒ‚ ƒ‹ ”‹ • „  ‚ –—’ ƒ‰˜˜‚‚‚ ‚™  „  ‚  ’„šƒ‘ƒ „ ’ File Name:SD-500-SPEC 2015-08-06 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-SD-500-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om MEAN WELL SD-500 SERIES 500 Watt Chassis Mount DC-DC Converter 500W Single Output DC-DC Converter SD-500 series Measures: 8.46 x 4.53 x 1.97” Mechanical Specification Case No. 912A Unit:mm 117.5 32.5 150 27.5 177.5 7 6 5 4 LED +V ADJ. 2 1 CN3 47.7 4-M4 L=5mm 6 5 3 5-M3 L=3mm 2 1 15 215 32.5 150 14 max. Air flow direction 6-M4 L=5mm Control Pin No. Assignment (CN3) : HRS DF11-6DP-2DS or equivalent DC Input Terminal Pin No. Assignment Pin No. Assignment Pin No. Assignment Pin No. Assignment Pin No. Assignment Mating Housing Terminal 1 DC INPUT V+ 4,5 -V 1 +S 4 GND JST SPHD-002T-P0.5 HRS DF11-6DS 2 DC INPUT V- 6,7 +V 2 -S 5 RC or equivalent or equivalent 3 FG 36 OUTPUT OK RCG Block Diagram BOOST fosc : 65KHz +S PWM fosc : 110KHz ACTIVE POWER RECTIFIERS +V EMI INRUSH I/P SWITCH- & BOOST CURRENT FILTER -V FILTER ING LIMITING -S BOOST O.V.P. CONTROL O.L.P. PWM DETECTION O.T.P. CONTROL CIRCUIT OUTPUT REMOTE ON/OFF CONTROL AUX FAN POWER Derating Curve Static Characteristics 100 100 90 80 80 75 70 60 only for SD-500L-12 60 for SD-500L for SD-500H 40 50 20 40 -20 0 10 20 30 40 45 50 60 70 19 24 36 48 72 96 144 (HORIZONTAL) AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (VDC) File Name:SD-500-SPEC 2015-08-06 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-SD-500-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om LOAD (%) 135 10 8.6 LOAD (%) 38.95 C L 16 25 10 95 50 32.5 50 50.5 115 MEAN WELL SD-500 SERIES 500 Watt Chassis Mount DC-DC Converter 500W Single Output DC-DC Converter SD-500 series Measures: 8.46 x 4.53 x 1.97” Function Description of CN3 Pin No. Function Description Positive sensing. The +S signal should be connected to the positive terminal of the load. The +S and -S leads should be twisted in pair to 1 +S minimize noise pick-up effect. The maximum line drop compensation is 0.5V. Negative sensing. The -S signal should be connected to the negative terminal of the load. The -S and +S leads should be twisted in pair to 2 -S minimize noise pick-up effect. The maximum line drop compensation is 0.5V. Open collector signal, reference to pin4(GND). Low when PSU turns on. The maximum sink current is 10mA and the maximum 3 O/P OK external voltage is 13V. 4 GND These pins connect to the negative terminal (-V). 5 RC Remote ON/OFF 6 RCG Remote ON/OFF ground Function Manual 1.Remote ON/OFF (1)Remote ON/OFF control becomes available by applying voltage in CN3 (2)Table 1.1 shows the specification of Remote ON/OFF function (3)Fig.1.2 shows the example to connect Remote ON/OFF control function Table 1.1 Specification of Remote ON/OFF Connection Method Fig. 1.2(A) Fig. 1.2(B) Output on SW Open V=0~0.8Vdc Output off SW Close V=4~10Vdc Fig.1.2 Examples of connecting remote ON/OFF (A)Using external voltage source (B)Using external voltage source 5V 1KΩ 1KΩ RC RC V SW RCG RCG 2.Output OK signal "Output OK" is an open collector signal. It indicates the output status of the PSU. It can operate in two ways : One is sinking current from external signal ; the other is sending out a voltage signal. 2-1 Sink current : The maximum sink current is 10mA and the maximum external voltage is 13V. 2-2 Voltage signal : +V ADJ. CN3 +Vo +Vo -Vo -Vo TB1 Between O/P OK(pin3) and GND(pin4) Output Status 0 ~ 0.5V ON 1 5 12 ~ 13V OFF 2 6 CN3 1 5 +S O/P OK RC -S GND RCG 2 6 File Name:SD-500-SPEC 2015-08-06 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-SD-500-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om MEAN WELL SD-500 SERIES 500 Watt Chassis Mount DC-DC Converter 500W Single Output DC-DC Converter SD-500 series Measures: 8.46 x 4.53 x 1.97” 3.Remote Sense The remote sensing compensates voltage drop on the load wiring up to 0.5V. +V ADJ. CN3 +Vo +Vo -Vo -Vo TB1 1 5 2 6 CN3 1 5 Sense lines should LOAD be twisted in pairs +S -S +S O/P OK RC (pin1) (pin2) + - -S GND RCG 2 6 File Name:SD-500-SPEC 2015-08-06 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-SD-500-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om