MEAN WELL SDM30-12S3
Specifications
Manufacturer
MEAN WELL
Manufacturers Part #
SDM30-12S3
Lead Time
10 Week Lead Time
Series
SDM30
Factory Pack Quantity
1
Cooling Method
Convection
Dimensions
2.00 x 2.00 x 0.63"
Driving Method
Constant Current
Efficiency
77%
Input Type
DC
Input Voltage Nominal
12 VDC
Isolation
1000 VDC
Mechanical Style
Isolated
Mounting
Through Hole
Number of Outputs
1
Operating Temperature
- 25 to + 85°C
Output Amps 1
5 A
Output Voltage V1 Nominal
3.3 VDC
Package Type
Enclosed
Power
16.5 W
Subcategory
DC-DC Converter
Datasheet
Extracted Text
30W DC-DC Single Output SDM 30 series ■ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ SPECIFICATION MODEL SDM30-12S3 SDM30-24S3 SDM30-48S3 SDM30-12S5 SDM30-24S5 SDM30-48S5 DC VOLTAGE 3.3V 5V RATED CURRENT 5A 5A CURRENT RANGE 0 ~ 5A 0 ~ 5A RATED POWER 16.5W 25W OUTPUT RIPPLE & NOISE (max.) Note.2 75mVp-p 75mVp-p VOLTAGE TOLERANCE Note.3 ±3.0% ±2.0% max. LINE REGULATION ±1.0% ±1.0% LOAD REGULATION ±1.0% ±1.0% TRIM OUTPUT ±13%(Typ.) output voltage RATED DC INPUT 12S: 12VDC 24S: 24VDC 48S: 48VDC VOLTAGE RANGE 12S: 9.2 ~ 18VDC 24S: 18~ 36VDC 48S: 36~ 72VDC EFFICIENCY (Typ.) 77% 79% 80% 77% 79% 80% INPUT DC CURRENT 12S:3.6A 24S:2A 48S:1A IDLE CURRENT 12S:35mA 24S/48S:30mA Above 105% rated output power OVERLOAD Protection type : Over power limiting, recovers automatically after fault condition is removed PROTECTION 3.8 ~ 4.95V 5.75 ~ 7.5V OVER VOLTAGE Protection type : Shut off o/p voltage, clamping by zener diode SHORT CIRCUIT Protection type : Constant current limiting, recovers automatically after fault condition is removed Logic "1" or open: power on Logic "0" short to Vin-: power off FUNCTION ON/OFF CONTROL WORKING TEMP. -25 ~ +85℃ (Refer to "Derating Curve") STORAGE TEMP., HUMIDITY -25 ~ +85℃, 0 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT ±0.03%/℃ (0~50℃) SAFETY STANDARDS Design refer to LVD, EAC TP TC 004 approved ISOLATION VOLTAGE I/P-O/P:1KVDC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25℃ / 70% RH EMC (Note 6) EMC EMISSION Compliance to EN55032 (CISPR32) Class B, EAC TP TC 020 Compliance to EN61000-2,3,4,6,8, EN55024, light industry level, criteria A, EAC TP TC 020 EMC IMMUNITY MTBF 322.4K hrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 50.8*50.8*16mm (2"*2"*0.63") (L*W*H) 0.1Kg; 150pcs/15.8Kg/0.97CUFT PACKING ℃ NOTE ≧ ℃℃ File Name:SDM30-SPEC 2018-01-12 30W DC-DC Single Output SDM 30 series ■ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ SPECIFICATION MODEL SDM30-12S12 SDM30-24S12 SDM30-48S12 SDM30-12S15 SDM30-24S15 SDM30-48S15 DC VOLTAGE 12V 15V RATED CURRENT 2.1A 2.5A 1.7A 2A CURRENT RANGE 0 ~ 2.1A 0 ~ 2.5A 0 ~ 1.7A 0 ~ 2A RATED POWER 25.2W 30W 25.5W 30W OUTPUT RIPPLE & NOISE (max.) Note.2 100mVp-p 100mVp-p VOLTAGE TOLERANCE Note.3 ±2.0% max. ±2.0% max. LINE REGULATION ±1.0% ±1.0% LOAD REGULATION ±1.0% ±1.0% TRIM OUTPUT ±13%(Typ.) output voltage RATED DC INPUT 12S: 12VDC 24S: 24VDC 48S: 48VDC VOLTAGE RANGE 12S: 9.2 ~ 18VDC 24S: 18~ 36VDC 48S: 36~ 72VDC EFFICIENCY (Typ.) 80% 82% 84% 80% 83% 85% INPUT DC CURRENT 12S:3.6A 24S:2A 48S:1A IDLE CURRENT 12S:35mA 24S/48S:30mA Above 105% rated output power OVERLOAD Protection type : Over power limiting, recovers automatically after fault condition is removed PROTECTION 13.8 ~ 18V 17.25 ~ 22.5V OVER VOLTAGE Protection type : Shut off o/p voltage, clamping by zener diode SHORT CIRCUIT Protection type : Constant current limiting, recovers automatically after fault condition is removed Logic "1" or open: power on Logic "0" short to Vin-: power off FUNCTION ON/OFF CONTROL -25 ~ +85℃ (Refer to "Derating Curve") WORKING TEMP. ENVIRONMENT STORAGE TEMP., HUMIDITY -25 ~ +85℃, 0 ~ 95% RH TEMP. COEFFICIENT ±0.03%/℃ (0~50℃) Design refer to LVD, EAC TP TC 004 approved SAFETY STANDARDS SAFETY & ISOLATION VOLTAGE I/P-O/P:1KVDC ISOLATION RESISTANCE EMC I/P-O/P:100M Ohms / 500VDC / 25℃ / 70% RH (Note 6) EMC EMISSION Compliance to EN55032 (CISPR32) Class B, EAC TP TC 020 EMC IMMUNITY Compliance to EN61000-2,3,4,6,8, EN55024, light industry level, criteria A, EAC TP TC 020 MTBF 322.4K hrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 50.8*50.8*16mm (2"*2"*0.63") (L*W*H) 0.1Kg; 150pcs/15.8Kg/0.97CUFT PACKING ℃ NOTE ≧ ℃℃ File Name:SDM30-SPEC 2018-01-12 30W DC-DC Single Output SDM 30 series Mechanical Specification Case No. SDM-30 Unit:mm 50.8 5.08 5.08 5.08 22.86 16 4 3 2 1 DIA 1mm BOTTOM VIEW 8 7 6 5 10.16 10.16 10.16 10.16 4.8(typ) Pin No. Assignment Pin No. Assignment Pin No. Assignment 1 +Vin 6 +Vout 2 -Vin 7 -Vout 3,5 No pin 8 Trim 4 Control ON/OFF Block Diagram fosc : 225KHz POWER RECTIFIERS +V EMI I/P SWITCH- & FILTER -V ING FILTER DETECTION O.L.P. PWM TRM CIRCUIT CONTROL C TRL O.V.P. Derating Curve External Output Trimming OUTPUT MAY OPTIONALLY BE EXTERNALLY TRIMMED(±13%) A FIXED RESISTER OR AN EXTERNAL TRIMPOT AS SHOWN 1 6 100 +VIN +VOUT For 48Sxx LOAD 10KΩ 80 2 7 VR -VIN -VOUT VR 60 4 8 For 24Sxx CTRL TRM UP DOWN TRIMPOT 40 For 12Sxx ON/OFF Control Pin 20 CONTROL INPUT.....................................PIN4 CONTROL COMMON................................PIN2 LOGIC COMPATIBILITY......CMOS OR OPEN COLLECTOR TTL -25 0 10 20 30 40 50 60 70 85 (HORIZONTAL) CONTROL VOLTAGE AMBIENT TEMPERATURE (℃) ON............+5.5VDC min OR OPEN CIRCUIT OFF......+2.5VDC max. OR SHORT TO PIN2 File Name:SDM30-SPEC 2018-01-12 LOAD (%) 45.72 2.54 50.8
Frequently asked questions
How does Electronics Finder differ from its competitors?

Is there a warranty for the SDM30-12S3?

Which carrier will Electronics Finder use to ship my parts?

Can I buy parts from Electronics Finder if I am outside the USA?

Which payment methods does Electronics Finder accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods