MEAN WELL SDR-480P-24

SEMI F47 MEAN WELL SDR-480P SERIES 480 Watt DIN Rail Mount Power Supply 480W Single Output Industrial DIN RAILwith PFC and Parallel Function SDR-480P series Measures: 5.06 x 4.93 x 3.35” ■  � € ‚ ”…•–†—˜ �‚€  ™…š  ­ ­ �
šŽ   �›„  ‰“  “œ™… �“   ž€   Ÿ‰ Ÿ‰‰ ‚Ÿ‰ �  ‚ ‰  �›„      ‚   �   ’Šž„
٠
 
�¡¢
”–   ‡ ˜ ‰ �ˆŒ„Œ„–ˆ
”„˜  ‰ �›„ ’£   �š  „  �­  PQ .. GL SPECIFICATION MODEL SDR-480P-24 SDR-480P-48 DCVOLTAGE 24V 48V RATEDCURRENT 20A 10A CURRENTRANGE 0 ~ 20A 0 ~ 10A RATEDPOWER 480W 480W PEAKCURRENT 30A 15A PEAKPOWER Note.6 720W (3sec.) OUTPUT RIPPLE&NOISE(max.) Note.2 100mVp-p 120mVp-p VOLTAGEADJ.RANGE 24 ~ 28V 48 ~ 55V VOLTAGETOLERANCE Note.3 1.2% 1.0% LINEREGULATION 0.5% 0.5% LOADREGULATION 1.0% 1.0% SETUP,RISETIME 1500ms, 150ms/230VAC 3000ms, 150ms/115VAC at full load HOLDUPTIME(Typ.) 14ms/230VAC at full load VOLTAGERANGE Note.7 90 ~ 264VAC 127 ~ 370VDC FREQUENCYRANGE 47 ~ 63Hz POWERFACTOR(Typ.) 0.94/230VAC 0.99/115VAC at full load EFFICIENCY(Typ.) 94% INPUT ACCURRENT(Typ.) 5A/115VAC 2.5A/230VAC INRUSHCURRENT(Typ.) 40A/115VAC 80A/230VAC LEAKAGECURRENT <0.6mA/ 240VAC Normally works within 110 ~ 150% rated output power formore than 3 secondsand then shut down o/p voltage with auto-recovery OVERLOAD >150% rated power, constant current limiting with auto-recovery within 2 seconds and may cause to shut down if over 2 seconds 29 ~ 33V 56 ~ 65V OVERVOLTAGE PROTECTION Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery 105℃℃ 5 (TSW : detect on heatsink of power switch) OVERTEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down 60Vdc/0.3A, 30Vdc/1A, 30Vac/0.5Aresistive load DCOKREALYCONTACTRATINGS(max.) FUNCTION Please see the Function Manual CURRENTSHARING -25 ~ +70℃ (Refer to "Derating Curve") WORKINGTEMP. Note.5 20 ~ 95% RH non-condensing WORKINGHUMIDITY STORAGETEMP.,HUMIDITY -40 ~ +85℃, 10 ~ 95% RH ENVIRONMENT TEMP.COEFFICIENT 0.03%/℃ (0 ~ 50℃) VIBRATION Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X,Y, Z axes; Mounting: Compliance to IEC60068-2-6 SAFETYSTANDARDS UL508,TUV EN60950-1 approved WITHSTANDVOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5KVAC SAFETY& ISOLATIONRESISTANCE I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25℃/ 70% RH EMC EMCEMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 (Note4) Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), EN61204-3, heavy industry level, criteriaA, EMCIMMUNITY SEMI F47, GLapproved MTBF 112.9K hrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 85.5*125.2*128.5mm (W*H*D) PACKING 1.6Kg; 8pcs/13.8Kg/0.9CUFT       
℃   NOTE     ­€ ‚ƒ­„­ ­€…†          ‚   ‚  …€ ­    ­€ €­    ‡ € ‡  „ € ˆ ‰
Š    …   €  
 € ‚€  ­€    ­€ ­ Š  €‹  ‰ €  
     Œ Ž ­ ‘ €‰‚  ­€  ‘ € ­ †’ ‚   ­ ‰ ‚“ € Ž€ ‚ ‰   FileName:SDR-480P-SPEC 2012-06-04 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-SDR-480P-power-supply.html h t t p: / / pow e r. sa ge r. c om DC OK DC OK + +VADJ 35 MEAN WELL SDR-480P SERIES 480 Watt DIN Rail Mount Power Supply 480W Single Output Industrial DIN RAILwith PFC and Parallel Function SDR-480P series Measures: 5.06 x 4.93 x 3.35” MechanicalSpecification Case No.984A Unit:mm 125.2 TB2 1 2 3 TB1 4 1 5 6 2 7 8 3 Terminal Pin No. Assignment (TB1) Pin No. Assignment 1 FG 2 AC/N 3 AC/L Terminal Pin No. Assignment (TB2) Pin No. Assignment ADMISSIBLE DIN-RAIL:TS35/7.5 ORTS35/15 1,2 DC OUTPUT+V 3,4 DC OUTPUT-V 5,6 Relay Contact 7 P+ (currene share) 8 P- (currene share) BlockDiagram DC OK RECTIFIERS EMI FILTER POWER PFC +V I/P & & SWITCHING CIRCUIT -V RECTIFIERS FILTER O.C.P. U.V.P. O.L.P. DETECTION FG PWM & PFC CIRCUIT PFC CONTROL CONTROL O.V.P. DCOKRelayContact Contact Close PSU turns on / DC OK. Contact Open PSU turns off / DC Fail. Contact Ratings (max.) 30V/1Aresistive load. FileName:SDR-480P-SPEC 2012-06-04 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-SDR-480P-power-supply.html h t t p: / / pow e r. sa ge r. c om 85.5 128.5 MEAN WELL SDR-480P SERIES 480 Watt DIN Rail Mount Power Supply 480W Single Output Industrial DIN RAILwith PFC and Parallel Function SDR-480P series Measures: 5.06 x 4.93 x 3.35” PeakLoading (1) (2) 720W 720W 480W 240W 50 sec. 3 sec. 15 sec. 3 sec. DeratingCurve OutputderatingVSinputvoltage 100 150 90 For 3 sec. (typ.) 120 80 100 70 60 Continuous 80 50 60 40 -25 0 10 20 30 40 50 60 70 (VERTICAL) 90 100 110 135 155 230 264 AMBIENTTEMPERATURE(℃) INPUTVOLTAGE(V)60Hz FunctionManual 1. Current sharing (1)Parallel operation is available by connecting the units shown as below (P+,P- are connected mutually in parallel) : (2)The voltage difference among each output should be minimized that less than 0.2V is required. (3)The total output current must not exceed the value determined by the following equation (Output current at parallel operation) =(The rated current per unit) x (Number of unit) x 0.9. (4)In parallel operation 8 units is the maximum, please consult the manufacture for other applications. (5)When in parallel operation, the minimum output load should be greater than 3% of total output load. (Min. load > 3% rated current per unit x number of unit) + LOAD - + - DC OK P+ P- + - DC OK P+ P- + - DC OK P+ P- + - DC OK P+ P- + - DC OK P+ P- + --- DC OK P+ P- + DC OK P+ P- + DC OK P+ P- PSU PSU PSU PSU PSU PSU PSU PSU FileName:SDR-480P-SPEC 2012-06-04 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-SDR-480P-power-supply.html h t t p: / / pow e r. sa ge r. c om LOAD(%) LOAD(%)