MEAN WELL SPV-1500-48

MEAN WELL SPV-1500 SERIES 1500 Watt Enclosed with Fan Power Supply 1500W Single Output Power Supply SPV-1500 series Measures: 10.95 x 5.00 x 3.29” ■Ž … �™ ‹  •Ž  ­ �š›   ­ �  ‹ ­   ­ �œ ‚ ‹˜Ž  ˜ŽžŸ �˜ …›  •‹•‹‹­•‹  �Ž ­

‚ —

 ­  �­  ¡¢•   �  ‹­ 

  £¤£‹  �    ­ ƒ¢” ¥– �­    �œ ‚  • ˆ    �œ ‚ ‚ŽŽ  �œ ‚    �  Bauart gepruft Sicherheit egelma ge od os be wac g www.tuv.com ID 2000000000 SPECIFICATION MODEL SPV-1500-12 SPV-1500-24 SPV-1500-48 DC VOLTAGE 12V 24V 48V RATED CURRENT 125A 63A 32A CURRENT RANGE 0 ~ 125A 0 ~ 63A 0 ~ 32A RATED POWER 1500W 1512W 1536W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 200mVp-p OUTPUT VOLTAGE ADJ. RANGE ±5% typical adjustment by VR, 20% ~ 110% (typ.) adjustment by 1~6VDC external control signal VOLTAGE TOLERANCE Note.3 ±1.0% LINE REGULATION ±0.5% LOAD REGULATION ±0.5% SETUP, RISE TIME 1500ms, 100ms at full load HOLD UP TIME (Typ.) 10ms at full load 14ms at full load 16ms at full load VOLTAGE RANGE Note.5 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) 0.95/230VAC 0.98/115VAC at full load INPUT EFFICIENCY (Typ.) 86.5% 90% 90% AC CURRENT (Typ.) 17A/115VAC 8A/230VAC INRUSH CURRENT (Typ.) 30A/115VAC 60A/230VAC LEAKAGE CURRENT <2.0mA / 240VAC 105 ~135% rated output power OVERLOAD Protection type : Constant current limiting, recovers automatically after fault condition is removed 13.8 ~ 16.8V 30 ~ 34.8V 57.6 ~ 67.2V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover 105℃±5℃ (TSW2 ) detect on heatsink of power transistor OVER TEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down 12V@0.1A(Only for Remote ON/OFF control) AUXILIARY POWER(AUX) Please see the Function Manual REMOTE ON/OFF CONTROL FUNCTION Please see the Function Manual ALARM SIGNAL OUTPUT 2.4 ~ 13.2V OUTPUT VOLTAGE TRIM 4.8 ~ 28V 9.6 ~ 56V -20 ~ +70℃ (Refer to "Derating Curve") WORKING TEMP. 20~90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH TEMP. COEFFICIENT ±℃ 0.05%/ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH EMC (Note 4) EMC EMISSION Compliance to EN55022 (CISPR22), EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A EMC IMMUNITY MTBF 109K hrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION 278*127*83.5mm (L*W*H) 3.0Kg; 4pcs/13Kg/1.19CUFT PACKING         ℃
   NOTE    
  
  ­ € ‚    ƒ„    …     ­   ­   ƒ        
    †   ‡
 ˆ 
  ­    „ ‰Œ  Š   †   
‚  ‡‹ Ž­      ‡‘‡’ ­   “”‹
  …•• – — ­
    ‹­˜ Š  ­ ‹ File Name:SPV-1500-SPEC 2015-07-14 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-SPV-1500-power-supply.html h t t p: / / pow e r. sa ge r. c om MEAN WELL SPV-1500 SERIES 1500 Watt Enclosed with Fan Power Supply 1500W Single Output Power Supply SPV-1500 series Measures: 10.95 x 5.00 x 3.29” Mechanical Specification Case No.943A Unit:mm 240 11.2 16 max. 38 8-M4 L=5(Both Sides) 278 240 11.2 OUTPUT +V 4-M4 L=5 -V CN1 CN2 CN3 886 664 442 22 7 553 331 11 7 5 Air flow I/P LED direction SVR 1 2 3 AC Input Terminal Pin No. Assignment Control Pin No. Assignment(CN1,CN2) : HRS DF11-8DP-2DS or equivalent Pin No. Assignment Pin No. Assignment Pin No. Assignment Mating Housing Terminal 1 FG RCG -S 1 5,7 HRS DF11-8DS HRS DF11-**SC 2 AC/N 2 RC2 LS(Current Share) 6 or equivalent or equivalent 3 AC/L 3 PV 8 +S 4 PS RCG: Remote ON/OFF Ground -S: -Remote Sensing RC2: Remote ON/OFF LS: Load Share PV: Output voltage external control +S: +Remote Sensing PS: Reference voltage terminal, PS and PV are connected when shipping Control Pin No. Assignment(CN3) : HRS DF11-6DP-2DS or equivalent Pin No. Assignment Pin No. Assignment Mating Housing Terminal P OK GND AUXG 14 HRS DF11-6DS HRS DF11-**SC 25 P OK RC1 or equivalent or equivalent 36 RCG AUX P OK GND: Power OK Ground AUXG: Auxiliary Ground P OK: Power OK Signal RC1: Remote ON/OFF RCG: Remote ON/OFF Ground AUX: Auxiliary Output PFC fosc : 70KHz Block Diagram PWM fosc : 100KHz +S ACTIVE RECTIFIERS RECTIFIERS EMI POWER +V INRUSH I/P & & CURRENT SWITCHING FILTER -V FILTER LIMITING PFC -S PFC O.V.P. CONTROL O.L.P. PWM DETECTION CONTROL O.T.P. CIRCUIT P OK REMOTE RC LOAD CONTROL SHARING LS FAN AUX RECTIFIERS POWER & AUX POWER FILTER (12V/0.1A) File Name:SPV-1500-SPEC 2015-07-14 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-SPV-1500-power-supply.html h t t p: / / pow e r. sa ge r. c om 83.5 127 93 38.1 22.7 17.5 13 10 4 16 MEAN WELL SPV-1500 SERIES 1500 Watt Enclosed with Fan Power Supply 1500W Single Output Power Supply SPV-1500 series Measures: 10.95 x 5.00 x 3.29” Derating Curve Static Characteristics 100 Others 80 100 90 60 50 12V 80 40 70 20 60 -20 0 10 20 30 40 45 50 60 70 (HORIZONTAL) 90 100 120 140 150 160 180 200 220 240 264 AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (V) 60Hz Function Manual 1.Remote ON/OFF (1)Remote ON/OFF control becomes available by applying voltage in CN1 & CN2 & CN3 (2)Table 1.1 shows the specification of Remote ON/OFF function (3)Fig.1.2 shows the example to connect Remote ON/OFF control function Table 1.1 Specification of Remote ON/OFF Connection Method Fig. 1.2(A) Fig. 1.2(B) Fig. 1.2(C) Output on SW Open SW Open SW Close SW Logic Output off SW Close SW Close SW Open Fig.1.2 Examples of connecting remote ON/OFF (A)Using external voltage source (B)Using internal 12V auxiliary output AUX AUX 2.2KΩ 2.2KΩ RC1 RC1 5V 150Ω 150Ω RC2 RC2 12V typ. 12V typ. 620Ω SW RCG RCG SW AUXG AUXG (C)Using internal 12V auxiliary output AUX 2.2KΩ RC1 150Ω RC2 12V typ. SW RCG AUXG File Name:SPV-1500-SPEC 2015-07-14 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-SPV-1500-power-supply.html h t t p: / / pow e r. sa ge r. c om LOAD (%) LOAD (%) MEAN WELL SPV-1500 SERIES 1500 Watt Enclosed with Fan Power Supply 1500W Single Output Power Supply SPV-1500 series Measures: 10.95 x 5.00 x 3.29” 2.Alarm Signal Output P OK (1)Alarm signal is sent out through "P OK" & "P OK GND" pins (2)An external voltage source is required for this function. The maximum applied voltage is 50V and the maximum sink current is 10mA R (3)Table 2.1 explains the alarm function built-in the power supply 0.1uF 100KΩ V Function Description Output of alarm(P OK) The signal is "Low" when the power supply is above Low 15% of the rated output voltage-Power OK (0.5V max at 10mA) P OK High or open The signal turns to be "High" when the power supply (External applied voltage P OK GND External voltage and R is under 15% of the rated output voltage-Power Fail 10mA max.) (The max. sink is 10mA and 50V) Fig. 2.2 Internal circuit of P OK (Open collector method) Table 2.1 Explanation of alarm function 3.External Voltage Control Vout OVP 120%(Typ.) 120 +S 100 100 +V +V LOAD -V 80 80 Non-Linear -V -S 60 60 40 40 PV 1~6V 20 20 -S V V PS 123456 20 40 60 80 100 120 EXTERNAL VOLTAGE (DC) OUTPUT VOLTAGE (%) Note: (1)Reference voltage terminal, PS and PV are connected when shipping (2)+S & +V, -S & -V also need to be connected on CN1 or CN2. 4.Current Sharing No.1(Master) (1)Parallel operation is available by connecting the units shown as below V+ +S (+S,-S and LS are connected mutually in parallel): -S CN1 LS V- (2)The voltage difference among each output should be minimized that less than 0.2V is required +S -S CN2 LS (3)The total output current must not exceed the value determined by the following equation AC/L AC/N (Output current at parallel operation)=(The rated current per unit) x (Number of unit) x 0.9 (4) In parallel operation 3 units is the maximum, please consult the manufacturer for other applications (5) When remote sensing is used in parallel operation, the sensing wire must be connected only No.2(Slave) to the master unit V+ +S -S CN1 Note : In parallel connection, maybe only one unit (master) operate if the total output load is LS V- +S less than 5% of rated load condition. -S CN2 LS The other PSUs (slaves) may go into standby mode and their output LEDs will not turn on. AC/L AC/N (6)Under parallel operation, the "output voltage trim" function is not available. +S +V Load No.3(Slave) -V -S V+ +S -S CN1 LS V- +S -S CN2 LS AC/L AC/N File Name:SPV-1500-SPEC 2015-07-14 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-SPV-1500-power-supply.html h t t p: / / pow e r. sa ge r. c om OUTPUT VOLTAGE (%) OUTPUT CURRENT (%)