MEAN WELL TS-3000-248B
Specifications
Manufacturer
MEAN WELL
Manufacturers Part #
TS-3000-248B
Lead Time
10 Week Lead Time
Industry Aliases
TS-3000-248B
Series
TS-3000
Factory Pack Quantity
1
Application
DC/AC Inverter
Cooling Method
Air-Cooled
Dimensions
18.38 x 11.14 x 3.94"
Environmental Conditions
General Purpose
Industry
Industrial, OEM/Commercial
Input Type
DC
Input Voltage Nominal
12, 24, 48
Mechanical Style
Enclosed
Number of Outputs
1
Operating Temperature
0 to +50°C, derate linearly to 60% power from 40 to 50°C
Output Voltage V1 Nominal
230 V
Power
3000 W
Subcategory
DC-AC Inverter
Datasheet
Extracted Text
Mean Well TS-3000 SERIES 3000 Watt Inverter Power Supply 3000W True Sine Wave DC-AC Inverter TS-3000 series Measures: 18.38 x 11.14 x 3.94” ■ƒ � � � � � € ‚‚ �‚ � €‚‚‚‚ ‚ �ƒ„…‚‚€†„…‚ †‚ †€… † †‡‚†‚ †ˆ‰Š �ˆ‚ƒ€‚‹‚‹ ‚ Œ€‹ ‚ ………… �‚€ ‚ Ž …ƒ‘’ E13 � SPECIFICATION MODEL TS-3000-112□ TS-3000-124□ TS-3000-148□ TS-3000-212□ TS-3000-224□ TS-3000-248□ RATED POWER (Typ.) 3000W MAXIMUM OUTPUT POWER (Typ.) 3450W for 180 sec. / 4500W for 10 sec. / surge power 6000W for 30 cycles Factory setting set at 110VAC Factory setting set at 230VAC AC VOLTAGE 100 / 110 / 115 / 120VAC selectable by setting button S.W 200 / 220 / 230 / 240VAC selectable by setting button S.W FREQUENCY 60±0.1Hz 50/60Hz selectable by setting button S.W 50±0.1Hz 50/60Hz selectable by setting button S.W OUTPUT WAVEFORM Note.7 True sine wave (THD<3%) AC REGULATION (Typ.) ±3% SAVING MODE (Typ.) Default disabled. Load≦5W will be changed to standby mode FRONT PANEL INDICATOR Battery voltage level, output load level, saving mode, fault and operation status BAT. VOLTAGE 12V 24V 48V 12V 24V 48V VOLTAGE RANGE (Typ.) Note.3,6 10.5 ~ 15VDC 21 ~ 30VDC 42 ~ 60VDC 10.5 ~ 15VDC 21 ~ 30VDC 42 ~ 60VDC 150A 75A DC CURRENT (Typ.) Note.4 300A 300A 150A 75A INPUT NO LOAD DISSIPATION (Typ.)≦10W @ standby saving mode OFF MODE CURRENT DRAW (Typ.)≦1mA EFFICIENCY (Typ.) Note.1 88% 90% 91% 89% 91% 92% BATTERY TYPES Open & sealed lead acid battery FUSE 40A*12 40A*6 20A*6 40A*12 40A*6 20A*6 BATTERY 11.3V 22.5V 45V 11.3V 22.5V 45V BAT. LOW ALARM Note.6 INPUT 10.5V 21V 42V 10.5V 21V 42V BAT. LOW SHUTDOWN Note.6 PROTECTION By internal fuse open REVERSE POLARITY 90℃± 5℃ 85℃± 5℃ 85℃± 5℃ 80℃± 5℃ 75℃± 5℃ 75℃± 5℃ OVER TEMPERATURE Protection type : Shut down o/p voltage, re-power on to recover OUTPUT SHORT Protection type : Shut down o/p voltage, re-power on to recover OUTPUT 105 ~ 115% load for 180 sec., 115% ~ 150% load for 10 sec. PROTECTION OVER LOAD (Typ.) Protection type : Shut down o/p voltage, re-power on to recover CIRCUIT BREAKER AC output receptacle:15A GFCI PROCTECTION Optional (Only type F) None WORKING TEMP. Note.2 0 ~ +40℃ @ 100% load ; 60℃ @ 50% load WORKING HUMIDITY 20% ~ 90% RH non-condensing ENVIRONMENT o -30 ~ +70℃ / -22 ~ +158 F, 10 ~ 95% RH STORAGE TEMP., HUMIDITY VIBRATION 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes None SAFETY STANDARDS UL458 (only for Type G ) LVD None EN60950-1 SAFETY & WITHSTAND VOLTAGE Bat I/P - AC O/P:3.0KVAC AC O/P - FG:1.5KVAC EMC ISOLATION RESISTANCE Bat I/P - AC O/P, Bat I/P - FG, AC O/P - FG: 100M ohms / 500VDC / 25℃/ 70% RH EMC EMISSION Compliance to FCC class A Compliance to EN55022 class A, 72/ 245/ CEE, 95/ 54/ CE, E-Mark EMC IMMUNITY None Compliance to EN61000-4-2,3,4,5,6,8,11 CONTROL WIRING RJ11 -RS232 (Option) OTHERS DIMENSION 466.8*283.5*100mm (L*W*H) PACKING 12.9Kg; 1pcs/14Kg/1.49CUFT ‘…“ ‘‹‚‚ ‘ ”‹”‹’”‚ … NOTE … ‘… …‡ … •…‰ ‹‚‚ ‘”‹•”‹•–”‚ … ’…ˆ‚‚€ € ‚ ‹’℃€€ … … ‚ ‚ ‚€ ‚ƒ‘‘†‘→±…’”—‘•†•→±‘”—‘•–†•–→±” ˜… ‹‚‚ ‘ ‹‹’”‚ … File Name:TS-3000-SPEC 2015-06-24 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-TS-3000-power-supply.html h t t p: / / pow e r. sa ge r. c om P P r r e r e r k k e e a a s s e e s s r r B B t t Mean Well TS-3000 SERIES 3000 Watt Inverter Power Supply 3000W True Sine Wave DC-AC Inverter TS-3000 series Measures: 18.38 x 11.14 x 3.94” A :TYPE A OUTLET TS 3000 112 A B :TYPE B OUTLET 12:12VDC TS:True sine wave inverter C :TYPE C OUTLET Bat. Voltage: 24:24VDC D :TYPE D OUTLET 48:48VDC E :TYPE E OUTLET F :TYPE F OUTLET 1:110VAC O/P Wattage:3000W Output: G :TYPE G TERMINAL 2:230VAC AC Output Receptacle (optional) Receptacle type (Terminal only) TYPE-A TYPE-B TYPE-C TYPE-D TYPE-E TYPE-F TYPE-G Country USA EUROPE AUSTRALIA U.K JAPAN GFCI ----- E13 E13 E13 Certificate (Expect for 48V input) Mechanical Specification Derating Curve Unit:mm 161.84 100 122.44 80 60 40 20 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE (℃) CURVE 1 Air flow Air flow direction direction 100 80 60 7.5 40 20 10.5VDC 11.5VDC 15VDC (HORIZONTAL) 21VDC 23VDC 30VDC 42VDC 46VDC 60VDC BATTERY INPUT VOLTAGE (V) CURVE 2 AC Receptacle ON OFF BATTERY LOAD 100 100 Setting INVERTER On 0 0 Bat Low Saving Chassis Cat.No.(1GG1HS-212) Ground Wire Range(10-4 AWG Str Cu Soldered Wires) Torque (17.7-26.5 in lb) Remote port AC OUTPUT 31.29 Type-A Note: When the load current is >15A, must use output terminal connection which can be found inside the AC output panel of the inverter. AC Receptacle ON OFF BATTERY LOAD 100 100 Setting INVERTER On 0 0 Bat Low Saving Chassis Cat.No.(1GG1HS-212) Wire Range(10-4 AWG Str Ground Cu Soldered Wires) Torque (17.7-26.5 in lb) 273 Remote port AC OUTPUT 283.5 31.29 Type-B File Name:TS-3000-SPEC 2015-06-24 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/mean-well-TS-3000-power-supply.html h t t p: / / pow e r. sa ge r. c om o o t t i i u R u R c c e e r r s s i i e e C C t t 100 7 31.6 12 34 46 286.2 90.3 466.8 13 13 LOAD (%) LOAD (%) Reverse Polarity Will Damage The Unit. POS NEG
Frequently asked questions
How does Electronics Finder differ from its competitors?

Is there a warranty for the TS-3000-248B?

Which carrier will Electronics Finder use to ship my parts?

Can I buy parts from Electronics Finder if I am outside the USA?

Which payment methods does Electronics Finder accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods