Manufacturers
MOLEX 0011201197
Description
Conn FFC/FPC Connector SKT 11 POS 0.5mm Solder RA SMD T/R
0011201197
Part Number
0011201197
Price
Request Quote
Manufacturer
MOLEX
Lead Time
Request Quote
Category
Connectors » Connector FFC-FPC
Specifications
Manufacturer
Molex
Manufacturers Part #
0011201197
Industry Aliases
11201197, 11-20-1197
Sub-Category
FFC & FPC Connectors
Packaging
Tape and Reel
Factory Pack Quantity
1
Datasheet
Extracted Text
10 9 8 7 6 5 4 3 2 1 注記NOTES 1.使用材料 F F MATERIAL ハウジング：46ナイロン、ガラス充填、UL94V-0、白 HOUSING:PA46,GLASS FILLED,UL94V-0,WHITE アクチュエータ：ポリフェニレンサルファイド（PPS）、 ガラス充填、UL94V-0、黒 ACTUATOR:POLYPHENYLENE SULFIDE,GLASS FILLED,UL94V-0,BLACK ターミナル：リン青銅、ニッケル下地金めっき（t=0.2） TERMINAL:PHOSPHOR BRONZE,GOLD OVER NICKEL PLATING +0.1 0.5 0 金具：リン青銅、ニッケル下地錫めっき（t=0.2） FITTING NAIL: PHOSPHOR BRONZE,TIN OVER NICKEL PLATING 2.エンボステープ梱包時は、アクチュエータがロックした状態になります。 E E IN THE PACKAGE,ACTUATOR OF PART E NO.52745-**59 SHOULD BE LOCKED. ソルダーテール半田付け面のズレ量、及び金具半田付け面のズレ量は、 3 基準面Hに対して上方向に0.1MAXIMUM、下方向0.15MAXIMUMとする。 MISALIGNMENT OF SOLDER TAILS AND FITTING NAILS FROM DATUM-H. UPPER DIRECTON:0.1MAXIMUM LOWER DIRECTION:0.15 MAXIMUM 偶数極に適用 4 APPLY FOR EVEN CIRCUIT. パターン剥離止め金具 5 FITTING NAIL FOR PREVENTION OF PEELING OF P.W.B. PATTERN. D D 6 R0.3は、FPCの胴体部にかからないこと R0.3 MUST NOT BE OVERLAPED TO PATTERN OF FPC. 7.ELV 及び RoHS 適合品 ELV AND RoHS COMPLIANT 16.1 14.3 10.65 9.5 52745-2097 20 15.6 13.8 10.15 9 52745-1997 19 15.1 13.3 9.65 8.5 52745-1897 18 14.6 12.8 9.15 8 52745-1797 17 14.1 12.3 8.65 7.5 52745-1697 16 C C 13.6 11.8 8.15 7 52745-1597 15 13.1 11.3 7.65 6.5 52745-1497 14 C 12.6 10.8 7.15 6 52745-1397 13 12.1 10.3 6.65 5.5 52745-1297 12 11.6 9.8 6.15 5 52745-1197 11 11.1 9.3 5.65 4.5 52745-1097 K 10 接点部(上面) 10.6 8.8 5.15 4 52745-0997 9 CONTACT POINT 10.1 8.3 4.65 3.5 52745-0897 (UPPER SIDE) 8 9.6 7.8 4.15 3 52745-0797 7 5 金具 9.1 7.3 3.65 2.5 52745-0697 6 B FITTING NAIL B 8.1 6.3 2.65 1.5 52745-0497 4 EMBOSSED PACKAGE 0.85 極数 D C B (A) CKT. ORDER No. オーダー番号 CONNECTOR SERIES NO. : 52745-**59 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE CURRENT REV DESC: mm 10:1 GENERAL TOLERANCES GENERAL TOLERANCES (UNLESS SPECIFIED) (UNLESS SPECIFIED) EC NO: 600082 10 UNDER ± 0.2 0.5 FPC CONN. ZIF FOR ANGULAR TOL ± 3.0 ° DRWN: YCHEN128 2018/02/27 SMT R/A (UPPER CONTACT) GOLD PLATING 4 PLACES ± 0.2 10 OVER 30 UNDER ± 0.25 CHK'D: KTAKAHASHI 2018/03/14 3 PLACES ± 0.25 VIEW K 0.66 30 OVER ± 0.3 APPR: NUKITA 2018/03/14 PRODUCT CUSTOMER DRAWING 2 PLACES ± 0.3 A A INITIAL REVISION: DOCUMENT NUMBER DOC TYPE DOC PART REVISION ANGULAR ± 3 ° (金具部投影図) 1 PLACE ± DRWN: KTOJO 2005/02/23 2.455 (DETAIL OF FITTING NAIL) DRAFT WHERE APPLICABLE PSD 001 SD-52745-050 D 0 PLACES ± APPR: NUKITA 2005/03/16 THIRD ANGLE PROJECTION DRAWING SERIES MATERIAL NUMBER CUSTOMER SHEET NUMBER MUST REMAIN DRAFT WHERE APPLICABLE MUST REMAIN A3-SIZE 52745 SEE TABLE GENERAL MARKET 1 OF 2 WITHIN DIMENSIONS DOCUMENT STATUS P1 RELEASE DATE 2018/03/14 07:58:49 WITHIN DIMENSIONS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 10 9 8 7 6 5 4 3 2 1 0.5±0.1 1.02 1.28 0.74 9 8 7 6 5 4 3 2 1 ±0.03 0.3 ±0.03 0.3 仕上がり厚さ 仕上がり厚さ THICKNESS THICKNESS 0.5(N+1)±0.07 0.5(N+1)±0.07 0.5(N-1)±0.05 0.5±0.1 0.5±0.1 E E 0.5(N-1)±0.05 0.5±0.05 0.5±0.08 0.5±0.08 +0.04 (PITCH) 0.35 -0.03 0.5±0.05 (PITCH) 0.3±0.03 R0.3 6 D D 適合金めっきFPC推奨寸法 適合金めっきFFC推奨寸法 APPLICABLE FPC OF GOLD APPLICABLE FFC OF GOLD PLATING RECOMMENDED DIMENSION PLATING RECOMMENDED DIMENSION 仕上がり厚さ：0.3±0.03 仕上がり厚さ：0.3±0.03 THICKNESS: 0.3+0.03/-0.03 THICKNESS: 0.3+0.03/-0.03 0.5(N-1)±0.05 3.65 3.65 0.45MAX. パターンおよび 0.5±0.05 半田禁止エリア C C (PITCH) (0.3) (NON-ACCUMULATIVE) KEEPING OUT AREA OF PATTERN AND SOLDERING L 金具パターンエリア 1.25 FPC構成推奨仕様 FFC構成推奨仕様 SOLDERING AREA M コネクタ位置 OF FITTING NAIL 1.25 STRUCTURE OF FPC STRUCTURE OF FFC CONNECTOR 1.1 B B POSITION DETAIL L 参考基板レイアウト (マウント面) RECOMMENDED P.C.BOARD PATTERN DIMENSION(REF.) (MOUNTING SIDE) PATTERN THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE R0.303 CURRENT REV DESC: BOARD GENERAL TOLERANCES mm 5:1 (0.605) GENERAL TOLERANCES (UNLESS SPECIFIED) (UNLESS SPECIFIED) (FROM PATTERN EDGE) EC NO: 600082 10 UNDER ± --- 0.5 FPC CONN. ZIF FOR A ANGULAR TOL ± 3.0 ° A DRWN: YCHEN128 2018/02/27 SMT R/A (UPPER CONTACT) GOLD PLATING 4 PLACES ± 0.2 10 OVER 30 UNDER ± --- VIEW M CHK'D: KTAKAHASHI 2018/03/14 3 PLACES ± 0.25 30 OVER ± --- APPR: NUKITA 2018/03/14 PRODUCT CUSTOMER DRAWING (DETAIL OF FITTING NAIL 2 PLACES ± 0.3 INITIAL REVISION: DOCUMENT NUMBER DOC TYPE DOC PART REVISION ANGULAR ± --- ° ON PATTERN) 1 PLACE ± DRWN: KTOJO 2005/02/23 DRAFT WHERE APPLICABLE PSD 001 SD-52745-050 D 0 PLACES ± APPR: NUKITA 2005/03/16 THIRD ANGLE PROJECTION DRAWING SERIES MATERIAL NUMBER CUSTOMER SHEET NUMBER MUST REMAIN DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS A3-SIZE 52745 SEE TABLE GENERAL MARKET 2 OF 2 DOCUMENT STATUS P1 RELEASE DATE 2018/03/14 07:58:49 WITHIN DIMENSIONS FORMAT: master-tb-prod-A3 REVISION: H DATE: 2018/01/18 9 8 7 6 5 4 3 2 1 4±0.5 6±0.5 (0.3) 0.6MAX. 補強板 (STIFFENER BOARD) (0.3) 1.94MIN. (0.3) 4±0.5 6±0.5 補強板 (STIFFENER BOARD) (0.2) 2.2 3.05 0.8 補強板：ポリイミド REINFORCE BOARD: POLYMIDE 熱硬化接着剤 THERMOSETTING ADHESIVE ベースフィルム：ポリイミド(25μm) BASE FILM: POLYIMIDE(25μm) 熱硬化接着剤 THERMOSETTING ADHESIVE 導体部： 銅箔(35μm) COPPER FOIL (35μm) 熱硬化接着剤 THERMOSETTING ADHESIVE カバーレイ : ポリイミド(25μm) めっき：金めっき(0.２μm) COVER FILM: POLYIMIDE(25μm) 下地ニッケル(1-5μm) PLATING: GOLD(0.2μm) NICKEL UNDER(1-5μm) 補強板：ポリエステル系 REINFORCE BOARD: PET 接着剤(難燃ポリエステル系) ADHESIVE（FLAME-RETARDANT POLYESTER ADHESIVE) 絶縁テープ：ポリエステル系(25μm) INSULATING FILM: PET(25μm) 接着剤(難燃ポリエステル系) ADHESIVE（FLAME-RETARDANT POLYESTER ADHESIVE) 導体部： 銅箔(35μm) COPPER FOIL (35μm) 接着剤(難燃ポリエステル系) めっき：金めっき(0.２μm) ADHESIVE（FLAME-RETARDANT 下地ニッケル(1-5μm) POLYESTER ADHESIVE) PLATING: GOLD(0.2μm) 絶縁テープ：ポリエステル系(25μm) NICKEL UNDER(1-5μm) INSULATING FILM: PET(25μm)
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the 0011201197?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Conn FFC Connector RCP 8 POS 2.54mm Solder RA Thru-Hole Bag 0015254081
Conn FFC/FPC Connector F 10 POS 2.54mm IDT ST Cable Mount SL?äó Tube 0015388109
Conn FFC/FPC Connector SKT 14 POS 2.54mm IDT ST Cable Mount SL?äó Tube 0015388149
Conn FFC/FPC Connector SKT 16 POS 2.54mm IDT ST Cable Mount SL?äó Tube 0015388169
Conn FFC/FPC Connector SKT 20 POS 2.54mm IDT ST Cable Mount SL?äó Tube 0015388209
Conn FFC/FPC Connector F 21 POS 2.54mm IDT ST Cable Mount SL?äó Tube 0015388219
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods