D2U5T-H3-5000-380-HU3C AC-DC Three Phase Power Converter PRODUCT OVERVIEW The D2U5T-H3-5000-380-HU3C is a High Efficiency 3500/5000 watt, power factor corrected three phase power supply for 230/480Vac lines with a 380V high voltage (HVDC) main output and a selectable 5V or 3.3V (20W) standby. The unit is provided with Droop Sharing and up to three (3) power modules may be operated in parallel. The power module is hot pluggable. The module is able to protect and recover from over temperature faults, and has status LEDs on the front panel and additional logic and PMBus status signals. Their 2U package and >16.5W/cubic inch power density make them ideal for delivering reliable, efficient power to servers, workstations, storage systems and other 380V HVDC distributed power systems. An optional power shelf is also available that accommodates up to three (3) power modules. ORDERING GUIDE FEATURES Model Number Power Main Output Standby Output Airflow  5KW (480Vac), 3.5KW (230Vac) Output 3.3V or 5V Power D2U5T-H3-5000-380-HU3C 5000W 380V Front to Back (Selectable)  Very High Efficiency; 95.4% @ 50% FL  380V High Voltage Main Output INPUT CHARACTERISTICS  3.3V or 5V Standby Output Parameter Conditions Min Typ Max Units  Nominal Dim’s: 5.1"(W) x 18"(L) x 3.3" (2U 47 50/60 63 Hz Input Frequency  16.5 watts/cubic inch power density 180 264 Vac Range 1   N+1 redundant (including hot docking) Input Voltage Operating Range Range 2 320 528 Vac   Droop sharing on Main Output Range 1 170 Vac  Over-voltage, over-current, over- Turn-on Voltage (Ramp-up) Range 2 280 Vac temperature protections 150 Vac  Internal cooling fan Range 1 Turn-off Voltage (Ramp-down) 260 Vac   I2C Bus Interface with status indicators Range 2  Optional 19" power shelf Maximum Input Current 13 Arms  RoHS compliant Inrush Current Cold Start 30 Apk  Two-year warranty 600W, 230 Vac 0.992 Power Factor, Range 1, 60Hz 0.998 1750W (50%), 230 Vac 0.998 3500W (100%), 230 Vac 0.910 600W, 480 Vac Power Factor, Range 2, 60Hz 2500W (50%), 480 Vac 0.995 5000W (100%), 480 Vac 0.995 www.murata-ps.com/en/3d/acdc.html OVERALL CHARACTERISTICS www.murata-ps.com/en/3d/acdc.html Parameter Conditions Min Typ Max Units www.murata-ps.com/en/3d/acdc.html Range 1 3500 www.murata-ps.com/en/3d/acdc.html Output Power W Range 2 5000 www.murata-ps.com/en/3d/acdc.html 700W (20%), 230Vac 89.5 www.murata-ps.com/en/3d/acdc.html Efficiency, Range 1 1750W (50%), 230Vac 93.6 3500W (100%), 230Vac 94.2 Available now at: % 500W (20%), 230Vac 92.6 www.murata-ps.com/en/3d/acdc.html Efficiency, Range 2 2500W (50%), 230Vac 95.4 5000W (100%), 230Vac 95.4 The following curves represent the achieved efficiency performance for the D2U5T-H3-5000-380-Hu3C product compared against a recognized industry standard for efficiency rating. The D2U5T-H3-5000-380-HU3C offers performance in excess of the industry standard limit as a required percentage of loading. Test methodology as per Ecova Generalized Test Protocol for Calculating the Energy Efficiency of Internal AC-DC and DC-DC Power Supplies Revision 6.7 CB Test Certificate For full details go to and Test Report www.murata-ps.com/rohs www.murata-ps.com/support D2U5T-H3-5000-380-HU3C.A02 Page 1 of 8 D2U5T-H3-5000-380-HU3C AC-DC Three Phase Power Converter EFFICIENCY PERFORMANCE CURVES OUTPUT VOLTAGE CHARACTERISTICS Min Typ Max Units Output Parameter Conditions 380V Output Current 0 9.2 Adc Range 1 0 13.34 Range 2 Voltage Set Point 380 Vdc @4.6A Range 1 380 @6.67A Range 2 Voltage Droop 7 Min to Max Current, Range 1 11 Min to Max Current, Range 2 0.1 % Line Regulation 1 1 Vp-p Ripple Voltage & Noise 100 1000 μF Load Capacitance 3.3 Vdc Voltage Set Point 3.3VSB 3.14 3.46 Line and Load Regulation 2 75 mVp-p Ripple Voltage & Noise 20MHz Bandwidth 0 6 A Output Current 20 1000 μF Load Capacitance 5 Vdc Voltage Set Point 5VSB 4.76 5.24 Line and Load Regulation 100 mVp-p Ripple Voltage & Noise2 20MHz Bandwidth 0 4 A Output Current 20 1000 μF Load Capacitance 1 Ripple and noise are measured with 22nF (U2J 630V) ceramic + 15 μF (UCC KXJ) of electrolytic de-coupling capacitors at the output connector load side. A short coaxial cable with 50ohm scope termination is used. 2 Ripple and noise are measured with 0.1 uF of ceramic capacitance and 10 uF of tantalum capacitance across the power supply outputs at the output connector load side. A short coaxial cable with 50ohm scope termination is used. www.murata-ps.com/support D2U5T-H3-5000-380-HU3C.A02 Page 2 of 8 D2U5T-H3-5000-380-HU3C AC-DC Three Phase Power Converter OUTPUT CHARACTERISTICS Parameter Conditions Min Typ Max Units Startup Time AC ramp up 3 s 380V, 50-100% load step, 0.1A/μs di/dt 15 Vp-p Transient Response 5VSB, 50-100% load step, 1A/μs di/dt 250 mVp-p 3.3VSB, 50-100% load step, 1A/μs di/dt 165 mVp-p Current sharing accuracy (up to 3 in parallel) 380V @100% load +/-10 % Hot Swap Transients All outputs within regulation 380V @100% load 25 Holdup Time ms VSB @100% Load 500 GENERAL CHARACTERISTICS Min Typ Max Units Parameter Conditions -40 70 °C Storage Temperature Range -15 50 °C Operating Temperature Range 10 90 % Operating Humidity Non-condensing 5 90 % Storage Humidity Non-condensing (Without derating at 40°C) 3000 Altitude m (Without derating at 50°C) 1800 Shock 30G non-operating Sinusoidal Vibration 0.5G, 5 – 500 Hz hrs MTBF Calculated per Telcordia SR-332 @40°C 220K 7 kg Weight CAN/CSA C22.2 No 60950-1-07, Am.1:2011, Am 2:2014 ANSI/UL 60950-1-2014 Safety Approvals IEC60950-1:2005 (2nd Ed.), Am 1:2009 + Am 2:2013 EN 60950-1:2006+A11:2009 +A1:2010 +A12:2011 +A2:2013 Input Fuses Power Supply has one internal 16A/500V fast blow fuse on each of the three AC line inputs. Material Flammability UL 94V0 PROTECTION CHARACTERISTICS Output Parameter Conditions Min Typ Max Units Over-temperature (intake) Auto-restart 57 60 63 °C Over Voltage Latching 418 445 V Over Current Range 1 Hiccup or Latching 105 130 % 380V Over Current Range 2 Hiccup or Latching 105 130 % Over Voltage Latching 3.9 4.3 V 3.3VSB Over Current Hiccup 6.3 9 A Over Voltage Latching 5.6 6.0 V 5VSB Over Current Hiccup 4.2 6 A www.murata-ps.com/support D2U5T-H3-5000-380-HU3C.A02 Page 3 of 8 D2U5T-H3-5000-380-HU3C AC-DC Three Phase Power Converter EMISSIONS AND IMMUNITY Characteristic Standard Compliance Input Current Harmonics IEC/EN 61000-3-2 Complies Conducted Emissions Class A, 6dB margin FCC 47 CFR Parts 15 Radiated Emissions (in the application) CISPR 22 EN55022 Class A, 6dB margin ESD Immunity IEC/EN 61000-4-2 Level 3 criteria A Radiated Field Immunity IEC/EN 61000-4-3 Level 3 criteria B Electrical Fast Transients/Burst Immunity IEC/EN 61000-4-4 Level 3 criteria A Surge Immunity IEC/EN 61000-4-5 Level 3 criteria A RF Conducted Immunity IEC/EN 61000-4-6 Level 3 criteria A Magnetic Field Immunity IEC/EN 61000-4-8 3 A/m criteria B 400Vrms Input Voltage 54V & VSB Outputs, Performance a) 100% load, Phase 0°, Dip 100% Duration 10ms 50% load, Phase 0°, Dip 100% Duration 20ms Voltage Dips & Interruptions 54V & VSB Outputs, Performance b) IEC/EN 61000-4-11 100% load, Phase 0°, Dip 100% Duration >10ms Any Load, Phase 0°, Dip 100% Duration >100ms Any valid Input Voltage, any load Voltage imbalance 54V & VSB Outputs, Performance a) (Circuit will stop when input voltage imbalance exceeds Dip 30% on single Phase or Line, Duration 100ms 8% for more than 100ms. Unit will restart when 54V & VSB Outputs, Performance b) imbalance returns below 8%) Dip 30% on single Phase or Line, Duration >100ms ISOLATION CHARACTERISTICS Min Typ Max Units Parameter Conditions 3000 Vrms Input to Output – Reinforced Insulation Safety Rating/Test Voltage 1500 Vrms Input to Chassis – Basic 1150 Vrms Output to Chassis – Basic www.murata-ps.com/support D2U5T-H3-5000-380-HU3C.A02 Page 4 of 8 D2U5T-H3-5000-380-HU3C AC-DC Three Phase Power Converter STATUS INDICATORS (LEDs) Status Indicators Input OK (Green) Output OK (Green) Fault4 (Yellow) AC input voltage is not present Off Off Off AC present and within the required operational range Solid Green Blinking Off Standby – ON; Main Output – OFF (disabled) Blinking Green at 1Hz rate AC present, but its level is not within the required operational range Off Off (0.5s on, 0.5s off) Blinking Green at 1Hz rate When hot-unplugging the power supply from a power shelf3 Off Off (0.5s on, 0.5s off) AC present and within the required operational range Standby – ON and within the specified regulation range Solid Green Solid Green Off Main Output – ON and within the specified regulation range AC present and within the required operational range Standby – ON and within the specified regulation range Main Output – ON and within the specified regulation range Solid Green Solid Green On Power supply is in a power limit or in an overcurrent condition. Any warning Levels (Input UV/OV, OC, Inlet Temp, Output and STBY OV/UV, OC, OTP, FAN) No Change No Change Blinking 1Hz Any Fault Levels (Input UV/OV, OC, Inlet Temp, Output and STBY OV/UV, OC, OTP, FAN) Depends on PS Status Depends on PS Status Depends on PS Status 3 The Input OK LED blinks to indicate that there is still energy inside the power supply until the input bulk capacitors are completely discharged or the housekeeping circuit is shut down. 4 The Fault LED and PS Fault signal shall be turned on to indicate that there is one or more of the following internal faults currently detected inside the power supply:  VSB out of range  Output stage OT  Fan fault  ORING fault (Output voltage less than bus voltage)  OC shutdown  OT shutdown  OV shutdown  Input stage OT  Fault induced shutdown occurred  Thermal sensor fault  Vout out of range  PFC Boost Vbulk fault As soon as all of the above faults are removed and the power supply operates normally, the Fault LED and PS Fault signal shall be turned off. LED Definition: Three LEDs shall be located on the front faceplate; these are: LED Status Input OK = ON Output OK = ON Fault = ON www.murata-ps.com/support D2U5T-H3-5000-380-HU3C.A02 Page 5 of 8 D2U5T-H3-5000-380-HU3C AC-DC Three Phase Power Converter Control Signals Signal (I/O) Description 5 Internal 10K pull-up resistor to internal VDD. PS_ON_H  Leaving signal pin open = Main Output ON  Tying signal pin to GND = Main Output OFF. 5 Short pin; internal 10K pull-up resistor to internal VDD. PS_KILL  Leaving signal pin open = All Outputs off  Tying signal pin to GND = All Outputs enabled. 5 Internal 10K pull-up resistor to internal VDD. PS_FAULT_L  PSU Fault Status .5 Internal 10K pull-up resistor to internal VDD PWR_GOOD_H  Main Output Status OK 5 Internal 10K pull-up resistor to internal VDD. STBY_SEL_IN  Leaving signal pin open = +5VSTBY  Tying signal pin to GND = +3V3STBY 5 Internal 10K pull-up resistor to internal VDD. AC_OK_H  AC OK Status 5 Internal 10K pull-up resistor to internal VDD. SMB_ALERT_L  SMB Alert signal output 5 VDD depends on Standby Voltage selection of either 3.3V or 5V. OUTPUT CONNECTOR Connector: FCI Power Blade Part # 51915-424 www.murata-ps.com/support D2U5T-H3-5000-380-HU3C.A02 Page 6 of 8 D2U5T-H3-5000-380-HU3C AC-DC Three Phase Power Converter OUTPUT CONNECTOR & SIGNAL PIN ASSIGNMENT Connector: FCI Power Blade Part # 51915-424 Power Blade Number Signal Function Signal Direction P13 -VOUT_PRE-CHARGE Hot Swap Pre Charge Output P12 -VOUT 380Vdc Return Output P11 +VOUT_PRE-CHARGE Hot Swap Pre Charge Output P10 +VOUT 380Vdc Output P9 Not fitted - - P8 Not fitted - - P7 AC1 AC Line Voltage Ph 1 Input P6 Not fitted - - P5 AC2 AC Line Voltage Ph 2 Input P4 Not fitted - - P3 AC3 AC Line Voltage Ph 3 Input P2 Not fitted - - P1 GND Safety Ground Input Signal Pin Number Signal Function Signal Direction A1 A1 I2C Address Bit 1 Signal Input A2 PS_FAULT_L PSU Fault Status Output A3 A0 I2C Address Bit 0 Signal Input A4 PS_PRESENT PSU Seated into Connector Output A5 SCL I2C Clock Signal Bi-Directional A6 SGND Signal ground (return) Output B1 A2 I2C Address Bit 2 Signal Input B2 PS_ON_H Enable PSU Input B3 +VSB +3.3V/5V STBY Out Output B4 SDA I2C Data Signal Bi-Directional Enable PSU B5 PS_KILL Input Shortest pin of the connector B6 VSB_RTN VSTBY_RTN Output C1 STBY_SEL_IN Selects +3V3 or +5VSTBY Input C2 AC_OK_H AC(DC) OK Status Output C3 +VSB +3.3V/5V STBY Out Output C4 +VSB +3.3V/5V STBY Out Output C5 VSB_RTN VSTBY_RTN Output C6 VSB_RTN VSTBY_RTN Output D1 SMB_ALERT_L SMB Alert signal output Output D2 PWR_GOOD_H Power OK Status Output D3 +VSB +3.3V/5V STBY Out Output D4 +VSB +3.3V/5V STBY Out Output D5 VSB_RTN VSTBY_RTN Output D6 VSB_RTN VSTBY_RTN Output MATING CONNECTOR Supplier Press Fit, Straight Press Fit, Right Angle Solder Straight Solder Right Angle FCI 51938-826LF www.murata-ps.com/support D2U5T-H3-5000-380-HU3C.A02 Page 7 of 8 D2U5T-H3-5000-380-HU3C AC-DC Three Phase Power Converter MECHANICAL DIMENSIONS 455.90 ±0.75 #6-32 CAPTIVE SCREW (2X) 1.50 141.60 ±0.25 129.60 ±0.50 6.00 ±0.25 486.60 REF 4.97 ±0.30 22.89 ±0.40 11.00 ±0.35 (2X) 151.60 ±0.50 Dimensions: 5.1" x 18"x 3.3" [129.5mm x 455.9mm x 84.5mm] OPTIONAL ACCESSORIES Description Part Number 12V D2U5T-380 Output Connector Card D2U5T-380-CONC APPLICATION NOTES Document Number Description Link ACAN-62 D2U5T-380-CONC Customer Interface Connector Card http://power.murata.com/datasheet?/data/apnotes/acan-62.pdf PMBusTM Communication Protocol for: ACAN-63 http://power.murata.com/datasheet?/data/apnotes/acan-63.pdf D2U5T-H3-5000-380-Hu3C This product is subject to the following operating requirements Murata Power Solutions, Inc. and the Life and Safety Critical Application Sales Policy: 11 Cabot Boulevard, Mansfield, MA 02048 -1151 U.S.A. Refer to: http://www.murata-ps.com/requirements/ ISO 9001 and 14001 REGISTERED Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2016 Murata Power Solutions, Inc. www.murata-ps.com/support D2U5T-H3-5000-380-HU3C.A02 Page 8 of 8 66.50 REF 18.00 ±0.35 (2X) 9.00 ±0.25 67.00 ±0.25 84.50 ±0.50 77.21 ±0.40