D2U5T-H3-7000-54-HU4C www.murata-ps.com AC-DC Three Phase Power Converter PRODUCT OVERVIEW The D2U5T-H3-7000-54-HU4C is a High Effi ciency 3500/7000 watt, power factor corrected, three phase power converter for 230/480VAC lines with a 54VDC main output and a 5V or 3.3V (20W) selectable standby output. The unit is provided with droop sharing and up to three supplies may be operated in parallel. The supply is hot pluggable. It recovers from over temperature faults, and has status LEDs on the front panel in addition to logic and PMBus status signals. The 2U package and 23.1W/cubic inch power density make them ideal for delivering reliable, effi cient power to servers, workstations, storage systems, broadcast transmitters and many other applications. ORDERING GUIDE Power Output Model Number Main Output Standby Output Airfl ow at 480Vac 3.3V or 5V D2U5T-H3-7000-54-HU4C 7000W 54V Back to front (selectable) FEATURES  7KW (480VAC), 3.5KW (230VAC) Output Power INPUT CHARACTERISTICS Parameter Conditions Min Typ Max Units  High Effi ciency; 96% @ 50% FL Input Frequency 47 50/60 63 Hz  54VDC Main Output Range 1 180 264 Vac Input Voltage Operating Range  3.3V or 5V Standby Output Range 2 320 525 Vac  Range 1 176 Vac Dims: 5.1"(W) x 18"(L) x 3.3" (2U) Turn-on Voltage (Ramp-up) Range 2 280 Vac  23.1 watts/cubic inch power density Range 1 150 Vac Turn-off Voltage (Ramp-down)  N+1 redundant (including hot docking) Range 2 260 Vac  Droop sharing on Main Output Maximum Input Current 15 Arms Inrush Current Cold Start 30 Apk  Over-voltage, over-current, over-temperature 600W 0.930 protections Power Factor, Range 1, 230Vac, 60Hz 1750W (50% FL) 0.990  Internal cooling fan 3500W (100% FL) 0.995 2  I C Bus Interface with status indicators 600W, 480Vac 0.850  Power Factor, Range 2, 480Vac, 60Hz 3500W (50% FL) 0.990 RoHS compliant 7000W (100% FL) 0.995  Two-year warranty OVERALL CHARACTERISTICS Parameter Conditions Min Typ Max Units Range 1 3500 Output Power W Range 2 7000 700W (20%), 230 Vac 89.0 Effi ciency, Range 1 1750W (50%), 230 Vac 93.5 3500W (100%), 230 Vac 94.0 % 1400W (20%), 480 Vac 94.2 Effi ciency, Range 2* 3500W (50%), 480 Vac 96.0 www.murata-ps.com/en/3d/acdc.html 7000W (100%), 480 Vac 95.5 www.murata-ps.com/en/3d/acdc.html www.murata-ps.com/en/3d/acdc.html * See graph on page 8. www.murata-ps.com/en/3d/acdc.html www.murata-ps.com/en/3d/acdc.html www.murata-ps.com/en/3d/acdc.html Available now at www.murata-ps.com/en/3d/acdc.html CB Test Certifi cate and Test Report For full details go to www.murata-ps.com/rohs www.murata-ps.com/support D2U5T-H3-7000-54-HU4C.B01 Page 1 of 8 D2U5T-H3-7000-54-HU4C AC-DC Three Phase Power Converter OUTPUT VOLTAGE CHARACTERISTICS Output Parameter Conditions Min Typ Max Units Range 1 0 64.8 Output Current Adc Range 2 0 129.6 @32.4A Range 1 54 Voltage Set Point @64.8A Range 2 54 Vdc 54V Min to Max Current, Range 1 1. 5V Voltage Droop Min to Max Current, Range 2 3.0V Line Regulation 0.1 % 1 Ripple Voltage & Noise 0.5 Vp-p Load Capacitance 470 5000 μF Voltage Set Point 3.30 Vdc Line and Load Regulation 3.14 3.46 2 3.3VSB Ripple Voltage & Noise 20MHz Bandwidth 100 mVp-p Output Current 0 6 A Load Capacitance 20 1000 μF Voltage Set Point 5.00 Vdc Line and Load Regulation 4.76 5.24 2 5VSB Ripple Voltage & Noise 20MHz Bandwidth 100 mVp-p Output Current 0 4 A Load Capacitance 20 1000 μF 1 Ripple and noise are measured with 2.2µF (X7R 100V) ceramic + 180μF (UCC EKY) of electrolytic de-coupling capacitors at the output connector load side. A short coaxial cable with 50Ω scope termination is used. 2 Ripple and noise are measured with 0.1µF of ceramic capacitance and 10 µF of tantalum capacitance across the power supply outputs at the output connector load side. A short coaxial cable with 50Ω scope termination is used. C1 2.2µF X7R 100V T1 + COAX + C2 RG587U 180µF 63V UCC EKY R1 54V Output SCOPE 50Ω – T2 + COAX RG587U + R2 VSB SCOPE 50Ω C3 C4 100NF X7R 25V 10µF 10V TANT – OUTPUT CHARACTERISTICS Parameter Conditions Min Typ Max Units Startup Time AC ramp up 3 s 54V, 50-100% load step, 0.1A/μs di/dt 2.4 Vp-p 3 Transient Response 5VSB, 50-100% load step, 1A/μs di/dt 250 mVp-p 3.3VSB, 50-100% load step, 1A/μs di/dt 250 mVp-p Current sharing accuracy (up to 3 in parallel) 54V @100% load +/-10 % Hot Swap Transients All outputs within regulation 54V @100% load 12 Holdup Time ms VSB @100% Load 100 3 Minimum output capacitance to be 470µF (low ESR). www.murata-ps.com/support D2U5T-H3-7000-54-HU4C.B01 Page 2 of 8 D2U5T-H3-7000-54-HU4C AC-DC Three Phase Power Converter GENERAL CHARACTERISTICS Parameter Conditions Min Typ Max Units Storage Temperature Range -40 70 °C Operating Temperature Range 0 50 °C Operating Humidity Non-condensing 10 90 % Storage Humidity Non-condensing 5 90 % Altitude (without de-rating at 40°C) 3000 m Altitude (without de-rating at 50°C) 1800 Shock 30G non-operating Sinusoidal Vibration 0.5G, 5 – 500 Hz MTBF Calculated per Telcordia SR-332 @40°C 250K hrs Weight 7 kg c-CSA-us (CSA 60950-1-07/UL 60950-1, Second Edition) TÜV EN 60950-1:2006+A11+A1+A12 Safety Approvals IEC 60950-1:2005 (2nd Ed) + A1:2009, and EN 60950-1:2006/A11:2009/A1:2010/A12:2011 Input Fuses One internal 16A/500V fast blow fuse on each of the three AC line inputs Material Flammability UL 94V0 Airflow Direction From Back (connector side) to Front. Optional Front to Back. PROTECTION CHARACTERISTICS Output Parameter Conditions Min Typ Max Units Over-temperature (intake) Auto-restart 52 55 63 °C Over Voltage Latching, toggling ON/OFF switch unlatches 58 60 62 V 54V Over Current Ranges 1 &2 Hiccup mode. Restart every 500msec. Recovers once load drops below OCP level 105 130 % Over Voltage Latching, AC OFF/ON cycling required to unlatch 3.9 4.3 V 3.3VSB Over Current Constant Current Limit (Latches if Output drops below 2V). Hiccup is optional 6.3 9 A Over Voltage Latching, AC OFF/ON cycling required to unlatch 5.6 6.0 V 5VSB Over Current Constant Current Limit (Latches if Output drops below 3V). Hiccup is optional 4.2 6 A EMISSIONS AND IMMUNITY Characteristic Standard Compliance Input Current Harmonics IEC/EN 61000-3-2 Complies Conducted Emissions Class A, 6dB margin FCC 47 CFR Parts 15 CISPR 22 EN55022 Radiated Emissions (in the application) Class A, 6dB margin ESD Immunity IEC/EN 61000-4-2 Level 3 criteria A Radiated Field Immunity IEC/EN 61000-4-3 Level 3 criteria B Electrical Fast Transients/Burst Immunity IEC/EN 61000-4-4 Level 3 criteria A Surge Immunity IEC/EN 61000-4-5 Level 3 criteria A RF Conducted Immunity IEC/EN 61000-4-6 Level 3 criteria A Magnetic Field Immunity IEC/EN 61000-4-8 3 A/m criteria B 400Vrms Input Voltage 54V & VSB Outputs, Performance a) 100% load, Phase 0°, Dip 100% Duration 10ms Voltage Dips & Interruptions 50% load, Phase 0°, Dip 100% Duration 20ms 54V & VSB Outputs, Performance b) 100% load, Phase 0°, Dip 100% Duration >10ms IEC/EN 61000-4-11 Any Load, Phase 0°, Dip 100% Duration >100ms Any valid Input Voltage, any load Voltage imbalance 54V & VSB Outputs, Performance a) (Circuit will stop when input voltage imbalance exceeds 8% for more Dip 30% on single Phase or Line, Duration 100ms than 100ms. Unit will restart when imbalance returns below 8%) 54V & VSB Outputs, Performance b) Dip 30% on single Phase or Line, Duration >100ms www.murata-ps.com/support D2U5T-H3-7000-54-HU4C.B01 Page 3 of 8 D2U5T-H3-7000-54-HU4C AC-DC Three Phase Power Converter ISOLATION CHARACTERISTICS Parameter Conditions Min Typ Max Units Input to Output – Reinforced 3000 Vrms Insulation Safety Rating/Test Voltage Input to Chassis – Basic 1500 Vrms Output to Chassis – Functional 500 Vdc STATUS INDICATORS (LEDs) 5 Status Indicators Input OK (Green) Output OK (Green) Fault (Yellow) AC present and within the regulation range; Solid Green Blinking Off Standby - ON; Main Output – OFF Blinking Green at 1Hz rate AC present, but its level is not within the required regulation range Off Off (0.5s on, 0.5s off) Blinking Green at 1Hz rate 4 When hot-unplugging the power supply from a power shelf Off Off (0.5s on, 0.5s off) AC input voltage is not present Off Off Off AC present and within the regulation range; Solid Green Solid Green Off Standby – ON, Main Output – ON and both within the regulation range AC present and within the regulation range; Solid Green Solid Green On Standby - ON; Main Output - ON; power supply is in a power limit or in an overcurrent condition. Any warning Levels (Input UV/OV, OC, Inlet Temp, Output and STBY OV/UV, OC, OTP, FAN) No Change No Change Blinking 1Hz Any Fault Levels (Input UV/OV, OC, Inlet Temp, Output and STBY OV/UV, OC, OTP, FAN) Depends on PS Status Depends on PS Status On 4 The Input OK LED blinks to indicate that there is still energy inside the power supply until the input bulk capacitors are completely discharged or the housekeeping circuit is shut down. 5 The Fault LED and PS Fault signal shall be turned on to indicate that there is one or more of the following internal faults currently detected inside the power supply: • VSB out of range • Output stage OT • Fan fault • ORING fault (Output voltage less than bus voltage) • OC shutdown • OT shutdown • OV shutdown • Input stage OT • Fault induced shutdown occurred • Thermal sensor fault • Vout out of range • PFC Boost Vbulk fault As soon as all of the above faults are removed and the power supply operates normally, the Fault LED and PS Fault signal shall be turned off. LED Definition: Three LEDs shall be located on the front faceplate, and these are: LED Status Input OK = ON Output OK = ON Fault = ON www.murata-ps.com/support D2U5T-H3-7000-54-HU4C.B01 Page 4 of 8 D2U5T-H3-7000-54-HU4C AC-DC Three Phase Power Converter Control Signals Signal (I/O) Description 6 Internal 10K pull-up resistor to internal VDD PS_ON_H (Input) • Leaving signal pin open = Main Output ON • Tying signal pin to GND = Main Output OFF 6 Short pin; internal 10K pull-up resistor to internal VDD PS_KILL (Input) • Leaving signal pin open = All Outputs off • Tying signal pin to GND = All Outputs enabled 6 Internal 10K pull-up resistor to internal VDD PS_FAULT_L (Output) • PSU Fault Status 6 Internal 10K pull-up resistor to internal VDD PWR_GOOD_H (Output) • Main Output Status OK I_SHARE (Input/output -bus) Analog representation of main output current; can be left open if not used 6 Internal 10K pull-up resistor to internal VDD STBY_SEL_IN (Input) • Leaving signal pin open = +5V STBY • Tying signal pin to GND = 3V3STBY 6 Internal 10K pull-up resistor to internal VDD AC_OK_H (Output) • AC OK Status 6 Internal 10K pull-up resistor to internal VDD SMB_ALERT_L (Output) • SMB Alert signal output 6 VDD depends on Standby Voltage selection of either 3.3V or 5V. AC POWER CONNECTOR Header Positronic PLS5W5F1000 Position Part Number Function 1 Positronic: FS612N2 Safety Ground 2 Positronic: FS612N2 AC Line Voltage Ph 1 Contacts 3 - Not fitted 4 Positronic: FS612N2 AC Line Voltage Ph 2 5 Positronic: FS612N2 AC Line Voltage Ph 3 1.795 [45.59] 1 2 3 0.802 [20.36] 0.401 [10.18] 4 5 2X Ø0.100 [Ø2.54] THRU 1.295 [32.89] www.murata-ps.com/support D2U5T-H3-7000-54-HU4C.B01 Page 5 of 8 D2U5T-H3-7000-54-HU4C AC-DC Three Phase Power Converter CUSTOMER AC POWER CONNECTOR Header Positronic PLS5W5M1000 Position Part Number Function 1 Positronic: MS612N Safety Ground 2 Positronic: MS612N-228.2 AC Line Voltage Ph 1 3 - Not fitted Contacts 4 Positronic: MS612N-228.2 AC Line Voltage Ph 2 5 Positronic: MS612N-228.2 AC Line Voltage Ph 3 NOTE: The Safety Ground MUST mate first. The Customer SHALL use the longer pin specified for position 1 and the shorter pins specified for positions 2, 4 and 5. 1.795±0.020 [45.59±0.51] 3 2 1 0.802 [20.36] 5 4 0.401 [10.18] 2X Ø0.100 [Ø2.54] THRU 1.295 [32.89] OUTPUT CONNECTOR Connector: FCI Power Blade. Right Angle Header, 24 Signal Pins & 12 Power Blades. Part # 51939-486LF Mating connector option #1: FCI Power Blade. Right Angle Connector, 24 Signal Pins & 12 Power Blades. Part # 51915-132 Mating connector option #2: FCI Power Blade. Straight Connector, 24 Signal Pins & 12 Power Blades. Part # 51940-323 POWER SIGNAL ROWS 1 2 3 4 5 6 E1 P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 E2 D UUUUHH C TTTTGG PA PA B SSSS F F A RRRRE E www.murata-ps.com/support D2U5T-H3-7000-54-HU4C.B01 Page 6 of 8 D2U5T-H3-7000-54-HU4C AC-DC Three Phase Power Converter OUTPUT CONNECTOR & SIGNAL PIN ASSIGNMENT Connector: FCI Power Blade Part # 51939-486LF Power Blade Number Signal Function Signal Direction P12 +VOUT 54Vdc Output P11 +VOUT 54Vdc Output P10 +VOUT 54Vdc Output P9 -VOUT 54Vdc Return Output P8 -VOUT 54Vdc Return Output P7 -VOUT 54Vdc Return Output P6 -VOUT 54Vdc Return Output P5 -VOUT 54Vdc Return Output P4 -VOUT 54Vdc Return Output P3 +VOUT 54Vdc Output P2 +VOUT 54Vdc Output P1 +VOUT 54Vdc Output Signal Pin Number Signal Function Signal Direction A1 A1 I2C Address Bit 1 Signal Input A2 PS_FAULT_L PSU Fault Status Output A3 A0 I2C Address Bit 0 Signal Input A4 VSB_RTN VSTBY_RTN Output A5 SCL I2C Clock Signal Bi-Directional A6 VOUT_SENSE+ VOUT_SENSE+ Input B1 A2 I2C Address Bit 2 Signal Input B2 PS_ON_H Enable PSU Input B3 +VSB +3.3V/5V STBY Out Output B4 VSB_RTN VSTBY_RTN Output Enable PSU B5 PS_KILL Input Shortest pin of the connector B6 N/A Reserved No User Connection Output C1 STBY_SEL_IN Selects +3V3 or +5VSTBY Input C2 AC_OK_H AC(DC) OK Status Output C3 +VSB +3.3V/5V STBY Out Output C4 VSB_RTN VSTBY_RTN Output C5 SDA I2C Data Signal Bi-Directional C6 VOUT_SENSE- VOUT_SENSE- Input D1 SMB_ALERT_L SMB Alert signal output Output D2 PWR_GOOD_H Power OK Status Output D3 +VSB +3.3V/5V STBY Out Output D4 VSB_RTN VSTBY_RTN Output D5 VSB_RTN VSTBY_RTN Output D6 VSB_RTN VSTBY_RTN Output www.murata-ps.com/support D2U5T-H3-7000-54-HU4C.B01 Page 7 of 8 D2U5T-H3-7000-54-HU4C AC-DC Three Phase Power Converter MECHANICAL DIMENSIONS Dimensions: 5.1" x 18"x 3.3" [129.5mm x 455.9mm x 84.5mm] EFFICIENCY 97 96 95 94 93 480VAC 92 91 90 0 10 20 30 40 50 60 70 80 90 100 Full Load (%) OPTIONAL ACCESSORIES Description Part Number 54V D2U5T Output Connector Card D2U5T-54-CONC APPLICATION NOTES Document Number Description Link TM ACAN-55 D2U5T PMBus Communication Protocol http://power.murata.com/datasheet?/data/apnotes/acan-55.pdf ACAN-56 D2U5T Output Interface Connector Card http://power.murata.com/datasheet?/data/apnotes/acan-56.pdf This product is subject to the following operating requirements Murata Power Solutions, Inc. and the Life and Safety Critical Application Sales Policy: 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Refer to: http://www.murata-ps.com/requirements/ ISO 9001 and 14001 REGISTERED Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2017 Murata Power Solutions, Inc. www.murata-ps.com/support D2U5T-H3-7000-54-HU4C.B01 Page 8 of 8 Efficiency (%)