EHS20-012-0S - MURATA POWER SOLUTIONS

Image of MURATA POWER SOLUTIONS EHS20-012-0S

Description

24 W, 36 -75 VDC Vin, Single Output, 1.2 VDC@20 A DC-DC Converter
EHS20-012-0S

Part Number

EHS20-012-0S

Price

Request Quote

Manufacturer

MURATA POWER SOLUTIONS

Lead Time

Request Quote

Category

Capacitors » DC-DC Converter

Specifications

Manufacturer

Murata Power Solutions

Manufacturers Part #

EHS20-012-0S

Lead Time

16 Week Lead Time

Series

EHS20-012

Factory Pack Quantity

Dimensions

2.30 x 0.82 x 0.37"

Efficiency

85%

Input Voltage Nominal

48 VDC

Isolation

1500 VDC

Mechanical Style

Isolated

Mounting

Through Hole

Number of Outputs

Operating Temperature

- 40 to + 90°C

Output Amps 1

20 A

Output Voltage V1 Nominal

1.2 VDC

Power

24 W

Subcategory

DC-DC Converter

Datasheet

cdc_ehs20-012.pdf

287 KiB

Download

Extracted Text

E Class Converters EHS20 – 1.2V Model Model 1.2V Units Parameter Output Voltage Setpoint 1.18 – 1.22 Vdc Line/Load Regulation Max 0.1% / 0.2% % Vo Output total regulation 1.16 – 1.24 Vdc Output adjust (note 4) 90-110 %Vo,nom Remote-sense Comp. 10% V Output Ripple & Noise (note 2) Max 100 mVp-p Output Current 0-20 A Efficiency (48V, Full load, 25C) Typ 85% % 1,000-10,000 External Capacitance μF Transient Response (typ) (note 3) 150 mV ΔVo 400 25% step, 1A/μs Ts μs Over-voltage trip point (latching) 1.5 – 1.8 V Over-current trip point (non-latching) Typ 25 A All specifications, waveforms, charts at Ta=25C, Vin=48V, unless otherwise specified 1 EHS20-012-6200991518 E Class Converters Murata Power Solutions EHS20 – 1.2V Model Parameter Conditions Min. Typ. Max. Units Input Input Voltage (Vin) 36 48 75 Vdc Reflected Ripple Current See note (1) 25 ‘mA p-p 2 Inrush Transient 0.2 A s 100mS 10% duty Input Voltage Transient 100 V cycle Undervoltage Lockout Turn-on 32 35 Vdc (non-latching)Turn-off 31 34 Vdc Over-voltage lockout (non-latching)Turn-off 77 81 Vdc Isolation Input-Output 1500 Vdc Resistance; input-output 10 Mohm Temperature Operating Ambient -40 90 °C Storage -40 125 °C Protection Over-Temperature (non-latching)Measured on PCB 130 °C Physical Information Dimensions 2.30”L x 0.82” W x 0.37”H (58.4 x 20.8 x 9.3 mm) Calculated at 40C ambient, (Bellcore) 1,000,000 Hrs EHS15/20 Series MTBF Demonstrated at 40C ambient with 90% confidence: 2,800,000 Hrs Complies with IEC/EN/CSA/UL 60950, provides basic insulation, input to output. Safety c-UL-us (US and Canada) recognized, TUV certified (Bauart). 2 EHS20-012-6200991518 E Class Converters Murata Power Solutions EHS20 – 1.2V Model EHS20-012 Thermal Derating EHS20-012 Thermal Derating Airflow from Vin to Vo, Tj = 120ºC Airflow from Vo(-) to Vo(+), Tj= 120ºC 25 25 20 20 15 15 400 LFM 300 LFM 400 LFM 300 LFM 10 200 LFM 100 LFM 10 200 LFM 100 LFM 5 5 25 35 45 55 65 75 85 25 35 45 55 65 75 85 Ambient Temperature [ºC] Ambient Temperature [ºC] EHS20-012 Enable with Pre-Bias EHS20-012 Efficiency 95 90 85 80 75 70 65 Vin=36V 60 Vin=48V Vin=75V 55 Output Voltage @ 0.2 V/div., 2 ms/div. 50 Prebias voltage =0.6 Vdc. Input Voltage 48 V 45 Load = 0 A, Load capacitance = 10000 uF. 40 4 6 8 1012141618 2022 24 Iout [Adc] EHS20-012 Trim-up and Trim-down Resistance Trim Up/Down Formula : 1.2V model 1000 5.10 Vnom() 100 % 510 Rup (1.2 V) Rup 10.2 K Rdown (1.2 V) 0.6 % % Where ( Vout Vnom) 100 and, Vout = Target output voltage 100 % Vnom Where 510 ( Vnom Vout) 100 Rdown() % 10.2 K % Vnom % 10 0% 2% 4% 6% 8% 10% Delta (%) 3 EHS20-012-6200991518 Output Current [A] Efficiency [%] Output Current [A] Resistance (Kohms E Class Converters Murata Power Solutions EHS20 – 1.2V Model EHS20- 012 Startup Sequence from Enable EHS20- 012 Startup Sequence from Vin Top Trace: Vout @ 0.5 V/div. Top Trace: Vout @ 0.5 V/div. Bot. Trace: Vin @ 50V/div. Bot. Trace: Venable @ 2 V/div. Horiz. @ 50 ms/div. Horiz. @ 5 ms/div. Load: 20 A. Turn-on delay: 110mS Load: 20 A, 10000 uF Turn-on delay: 4.38 ms EHS20-012 Transient Response 50-75% step ,1A/μs EHS20-012 Transient Response 50- 25% step, 1A/μs CH1: Vout AC coupled CH1: Vout AC coupled CH2 : Step up Current (2A/div) CH2 : Step down Current (2A/div) EHS20- 012 Input Reflected Ripple Current EHS20-012 Output Ripple Voltage, Io=20A Input Current @ 5 mA/div., 20 us/div. (9.2 mApp) Input Voltage: 48 V, Load Current: 20 A Note: see test circuit on following page. 4 EHS20-012-6200991518 E Class Converters Murata Power Solutions EHS20 – 1.2V Model Notes: 1. Input Reflected Ripple is specified when measured with the filter shown below i i s c L2 Vin 12uF DC-DC Converter 220uF, 33uF, ESR<0.1 Ohm s ESR<0.7 Ohm s @ 100kHz @ 100kHz RTN 2. Output Ripple and noise is specified when measured with a 10uF tantalum and a 1uF ceramic capacitor at the converter output pins 3. Transient response is specified with a 470uF tantalum capacitor at the output of the converter 4. Trim resistor connection: Rtrim-up connected from Vo adj to Vo(+), Rtrim –down connected from Vo adj to Vo(-). EHS20-012 Enable Pin Connection Table ENABLE POWER SUPPLY DISABLE POWER SUPPLY NEGATIVE LOGIC VERSION 0V < Venable < 0.8V 2.5V < Venable < 15V (internal pull-up > 50Kohms @ (external pull-up > 1Kohms) 5V) POSITIVE LOGIC VERSION 2.5V < Venable < 15V 0V < Venable < 0.8V (external pull-up > 1Kohms) (internal pull-up > 50Kohms @ 5V) Note: Power Supply has internal pull-up resistor. Enable pin is in a valid “high” state if left open-circuit. Safety considerations The EHS series of converters are certified to IEC/EN/CSA/UL 60950. If this product is built into information technology equipment, the installation must comply with the above standard. An external input fuse (5A to 30A recommended), must be used to meet the above requirements. The output of the converter [Vo(+)/Vo(-)] is considered to remain within SELV limits when the input to the converter meets SELV or TNV-2 requirements. The converters and materials meet UL 94V-0 flammability ratings. 5 EHS20-012-6200991518 E Class Converters Murata Power Solutions EHS20 – 1.2V Model Part Number Designations 6 EHS20-012-6200991518

Frequently asked questions

Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products