HPR1XXVC www.murata-ps.com 0.75 Watt Single Output DC/DC Converter Discontinued The HPR1XXVC Series uses advanced circuit HPR1XXVC Series. The high efficiency of the of the series, although a >1mA minimum load design and packaging technol‑ HPR1XXVC Series means less internal power is needed to realize published ogy to deliver superior reliability and perfor‑ dissipation, as low as 190mW. specifications. mance. A 170kHz push‑pull With reduced heat dissipation the HPR1XXVC The HPR1XXVC Series provides the user a oscillator is used in the input stage. Beat‑ Series can operate at higher temperatures with low cost converter without sacrificing reliabil‑ frequency oscillation problems are reduced no degradation. In addition, the high efficiency ity. The use of surface mounted devices and when using the HPR1XXVC Series with high of the HPR1XXVC Series means the series is advanced manufacturing technologies make 3 frequency isolation amplifiers. able to offer greater than 10 W/inch of output it possible to offer premium performance and Reduced parts count and high power density. Operation down low cost. efficiency add to the reliability of the to no load will not impact the reliability SPECIFICATIONS All specifications are typical at T = +25°C nominal input voltage unless otherwise specified. A PRODUCT SELECTION CHART Input Current Nominal Rated Rated Reflected Input Output Output Rated Load Efficiency Model Ripple Current No Load Recommended Alternatives Voltage Voltage Current Typ. VDC VDC mA mA mAp‑p % Discontinued HPR117VC 15 ±15 ±25 8 63 5 79 MEA1D1515DC HPR100VC 5 5 150 20 216 10 69 NKE0505DC / NME0505DC HPR105VC 5 ±15 ±25 20 200 5 75 NMA0515DC / MEA1D0515DC HPR101VC 5 12 62 20 212 5 70 NKE0512DC / NME0512DC HPR102VC 5 15 50 20 212 5 71 NKE0515DC / NME0515DC HPR103VC 5 ±5 ±72 20 218 5 68 NMA0505DC / MEA1D0505DC HPR104VC 5 ±12 ±30 20 212 5 68 NMA0512DC / MEA1D0512DC HPR106VC 12 5 150 10 90 5 69 NKE1205DC / NME1205DC HPR107VC 12 12 62 10 81 5 77 NKE1212DC / NME1212DC HPR108VC 12 15 50 10 81 5 77 NKE1215DC / NME1215DC HPR109VC 12 ±5 ±72 10 88 5 71 NMA1205DC / MEA1D1205DC HPR110VC 12 ±12 ±30 10 81 5 74 NMA1212DC / MEA1D1212DC HPR111VC 12 ±15 ±25 10 81 5 77 NMA1215DC / MEA1D1215DC HPR112VC 15 5 150 8 72 5 69 MEV1S1505DC HPR113VC 15 12 62 8 72 5 69 MEV1S1512DC HPR114VC 15 15 50 8 72 5 69 MEV1S1515DC HPR115VC 15 ±5 ±72 8 72 5 69 MEA1D1505DC HPR116VC 15 ±12 ±30 8 63 5 76 MEA1D1512DC HPR118VC 24 5 150 8 48 15 65 NME2405DC / MEV1S2405DC HPR119VC 24 12 62 8 48 15 65 NME2412DC / MEV1S2412DC HPR120VC 24 15 50 8 45 15 76 NME2412DC / MEV1S2415DC HPR121VC 24 ±5 ±72 8 45 15 69 MEA1D2405DC HPR122VC 24 ±12 ±30 8 45 15 67 MEA1D2412DC HPR123VC 24 ±15 ±25 8 45 15 69 MEA1D2415DC * For full details go to www.murata-ps.com/rohs www.murata-ps.com/support TDC_HPR1XXVC.D03 Page 1 of 4 HPR1XXVC 0.75 Watt Single Output DC/DC Converter SPECIFICATIONS, ALL MODELS Specifications are at T = +25°C nominal input voltage unless otherwise specified. A PARAMETER CONDITIONS MIN TYP MAX UNITS INPUT Voltage Range 4.5 5 5.5 VDC 10.8 12 13.2 VDC 13.5 15 16.5 VDC 21.6 24 26.4 VDC Voltage Rise Time See Typical Performance Curves & Application Notes: “Capacitive Loading Effects on Start-Up of DC/DC Converters” OUTPUT Rated Power 750 mW Voltage Setpoint Accuracy Rated Load, Nominal V ±5 % IN Ripple & Noise BW = DC to 10MHz 150 200 mVp-p BW =10Hz to 2MHz 30 40 mVrms Voltage (Over Input Voltage Range) 1mA to Rated Current, V = 5V 4.75 7 VDC OUT 1mA to Rated Current, V = 12V 11.40 15 VDC OUT 1mA to Rated Current, V = 15V 14.25 18 VDC OUT Temperature Coefficent .01 .05 %/ °C REGULATION Load Regulation (All other modes) Rated Load to 1mA Load 3 % GENERAL ISOLATION Rated Voltage 750 VDC Test Voltage 60 Hz, 10 Seconds 750 Vrms Resistance 10 GW Capacitance 25 100 pF Leakage Current V = 240VAC, 60Hz 2 8.5 mArms ISO Switching Frequency 170 kHz Frequency Change Over Line and Load 24 % Package Weight 3 g MTTF per MIL-HDBK-217, Rev. F* Circuit Stress Method Ground Benign T = +25°C 7.9 MHr A Fixed Ground T = +35°C 1.9 MHr A Naval Sheltered T = +35°C 1.2 MHr A Airborne Uninhabited Fighter T = +35°C 300 kHr A TEMPERATURE Specification -25 +25 +85 °C Operation -40 +100 °C Storage -40 +110 °C SOLDERING INFORMATION The HPR1XXVC devices are intended for wave soldering or manual soldering. They are not intended to be subject to surface mount processes under any circumstances. The normal wave soldering process can be used with these devices where the device is subjected to a maximum wave temperature of 260°C for a period of no more than 10 seconds. Within this time and temperature range, the integrity of the device’s plastic body will not be compromised and internal temperatures within the converter will not exceed 175°C. Care should be taken to control manual soldering limits identical to that of wave soldering. www.murata-ps.com/support TDC_HPR1XXVC.D03 Page 2 of 4 GENERAL OUTPUT INPUT HPR1XXVC 0.75 Watt Single Output DC/DC Converter TYPICAL PERFORMANCE CURVES Specifications are at T = +25°C nominal input voltage and nominal load. A VOUT VS LOAD VOUT VS LOAD VOUT VS LOAD (5Vout Models) (±5Vout Models) (12Vout Models) 5.7 5.4 12.5 12.4 5.5 5.2 12.3 12.2 5.3 5.0 12.1 5.1 4.8 12.0 4.6 4.9 11.9 040 80 120 160 020406080 020406080 Output Current (mA) Output Current each load (mA) Output Current each load (mA) VOUT VS LOAD VOUT VS LOAD VOUT VS LOAD (±12Vout Models) (15Vout Models) (±15Vout Models) 16.5 12.6 15.9 12.5 16.0 15.7 12.4 15.5 15.5 12.3 15.0 15.3 14.5 12.2 15.1 12.1 14.0 12.0 14.9 13.5 010203040 0204060800 0.2 0.4 0.6 0.8 1.0 Output Current each load (mA) Output Current each load (mA) Output Power each load (Watts) OSCILLATION FREQUENCY VS EFFICIENCY VS LOAD TEMPERATURE 90 220 75 200 60 45 180 30 160 15 0 140 60 0 20 40 80 100 -30 0306090 % of Rated Load (%) Temperature (°C) SAFE OPERATING AREA LOAD CAPACITANCE vs INPUT RISE TIME LOAD CAPACITANCE vs INPUT RISE TIME (5 Vout models) (15 Vout models) 600 60 50 500 40 400 30 300 SAFE OPERATING AREA SAFE OPERATING AREA 20 200 10 100 0 0 0 5 10 15 20 25 30 35 40 45 50 0 5 10 15 20 25 30 35 40 45 50 Rise Time of Input Voltage (mS) Rise Time of Input Voltage (mS) LOAD CAPACITANCE vs INPUT RISE TIME (12 Vout models) NOTES: 90 80 1.) When operated within the SAFE OPERATING AREA as defined 70 by the above curves, the output voltage of HPR1XXC devices is 60 guaranteed to be within 95% of its steady‑state value within 100 50 40 milliseconds after the input voltage has reached 95% of its steady‑ SAFE OPERATING AREA 30 state value. 20 10 2.) For dual output models, total load capacitance is the sum of the 0 capacitances on the plus and minus outputs. 0 5 10 15 20 25 30 35 40 45 50 Rise Time of Input Voltage (mS) www.murata-ps.com/support TDC_HPR1XXVC.D03 Page 3 of 4 Total Load Capacitance (uF) Total Load Capacitance (uF) Efficiency (%) Vout Vout Frequency (KHz) Vout Vout Total Load Capacitance (uF) Vout Vout HPR1XXVC 0.75 Watt Single Output DC/DC Converter MECHANICAL PACKAGE/PINOUT “V” DIP PACKAGE 0.785±0.010" (19.94±0.25) 1413 1110 98 TOP VIEW 0.695±0.015" 0.525±0.010" (17.65±0.38) (13.34±0.25) 1 2 3 47 5 6 0.375±0.005" SIDE VIEW (9.52±0.13) 0.015±0.005" 0.020±0.002" (0.38±0.13) (0.51±0.05) 0.100±0.010" (2.54±0.25) 0.125+0.030" 0°-15° -0.000" BOTTOM VIEW (3.18+0.76) 0.600" ( -0.00) (15.24) PIN CONNECTIONS NOTES: PIN# SINGLES DUALS PIN# SINGLES DUALS NC = Do Not Connect. 1 +VIN +VIN 7 +VOUT +VOUT Duplicate pin functions are internally connected. 2 -VIN -VIN 8 NC NC All dimensions are in inches (millimeters). 3 NC NC 9 NC NC 4 NC NC 10 NC NC GRID: 0.100 inches (2.54 millimeters) 5 -VOUT -VOUT 11 NC NC 6 NC Common 13 NC NC MATERIAL: Lead material is phosphor bronze; lead 14 NC NC finish is 100-300 microinches of matte tin over a nickel barrier layer of 5-40 microinches. ABSOLUTE MAXIMUM RATINGS ORDERING INFORMATION HPR 1XX V C Internal Power Dissipation ........................................ 450mW Device Family Short Circuit Duration ................................................ Momentary HPR Indicates DC/DC Converter Model Number Selected from Table of Electrical Characteristics Package Option V = DIP Package RoHS Compliant Version This product is subject to the following operating requirements Murata Power Solutions, Inc. and the Life and Safety Critical Application Sales Policy: 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Refer to: http://www.murata-ps.com/requirements/ ISO 9001 and 14001 REGISTERED Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. 2017 Murata Power Solutions, Inc. www.murata-ps.com/support TDC_HPR1XXVC.D03 Page 4 of 4