MURATA POWER SOLUTIONS MYBEA01210CZTB

MYBEA01210CZT DATA Sheet 1 DC-DC Converter DATA Sheet MYBEA01210CZT/ MYBEA01210CZTB Feature: th 1/8 Brick type Vin 36Vdc-75Vdc Vout 12Vdc Iout 10Adc 120W Application: This specification applies to DC-DC Converter MYBEA01210CZT/ MYBEA01210CZTB for telecommunication equipment. Please contact us before using our products for the application except this application. If any uncertain thing and/or suspicion arise on this English translation, such shall be entirely construed by the Japanese original. 1. Appearance MYBEA01210CZT, MYBEA01210CZTＢ 3. Part Number Part Number Base Plate Option MYBEA01210CZT No Base Plate MYBEA01210CZTB With Base Plate Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.4.9 ④ ①②③ ZT MYBEA 01210C_ _ MYBEA01210CZT DATA Sheet 2 3. Appearance, Dimensions 3.1 MYBEA01210CZT Lot No. Marking of No.1pin 58.4±0.5 MFG,ID 3.80 P=3.81±0.25 50.8±0.2 8 １ 7 ２ 6 5 4 ３ Product No. Last two digits of Product No. Pin No. B: Insert A: Stand-off portion to Via portion hole of PCB 1,2,3,5,6,7 φ1.57±0.15 φ1.02±0.15 4,8 φ2.36±0.15 φ1.57±0.15 Marking Terminal Specification (1) Parts No. MYBEA01210CZT Sn(100%)Plating on Ni over Cupper Base (2) MFG,ID (3) Lot No. □□□□ ①②③④ ①Production Factory (N: Wakura Murata) ②Production Year ③Production Month （1,2,3,…9,O,N,D） ④Revision symbol Blank (no revision) Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.4.9 22.8±0.5 3.78 2P 2P 0.50min P P P P 8.46±0.5 (3.68) MYBEA01210CZT DATA Sheet 3 3.2 MYBEA01210CZTB P=3.81±0.25 ±0.50 58.4 B: Insert A: Stand-off portion to Via Pin No. portion hole on PCB 1,2,3,5,6,7 φ1.57±0.15 φ1.02±0.15 4,8 φ2.36±0.15 φ1.57±0.15 Marking Terminal Specification (1) Parts No. MYBEA01210CZTB Sn(100%), Ni over Cuppoer Base (2) MFG,ID (3) Lot No. □□□□ ①②③④ ① Factory N: Wakura Murata Manufacturing Co., Ltd., T: Murata Electronics (Thailand), Ltd. ② Production Year Last number of year ③ Production Month 1,2,3,…9,X,Y,Z） ④ Revision symbol Blank (no revision) P in Number, Function Pin No. Signal Function 1 Vin(+) Positive Input Voltage 2 ON/OFF Remote ON/OFF 3 Vin(-) Negative Input Voltage 4 Vout(-) Negative output Voltage 5 SENSE(-) Negative Remote Sense 6 TRIM Output Voltage Adjustment 7 SENSE(+) Positive Remote Sense 8 Vout(+) Positive output Voltage Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.4.9 22.8±0.5 Ｐ 3.78 MYBEA 01210 0.5min CZTB (3.68) ①②③④ 11.3±0.5 MYBEA01210CZT DATA Sheet 4 4..Absolute Maximum Ratings Item Unit Absolute Rating Remarks Minimum Input Voltage V 0 Maximum Input Voltage Continuous V 36 Time 100ms V 50 Slew rate 26V/10μs Maximum V 7 ON/OFF pin Control Voltage Minimum V 0 5.Rating 5.1 Operating Temperature Range -40℃ ~ +85℃（Caution: Please refer the temperature derating.） 5.2 Operating Humidity Range 20% ~ 85% （with no dew deposit） 5.3 Storage Temperature Range -45℃ ~ +90℃ 5.4 Storage Humidity Range 10% ~ 95%（with no dew deposit） 5.5 Maximum Wet Bulb temperature 39℃ Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.4.9 MYBEA01210CZT DATA Sheet 5 6.Electrical Characteristics 6.1 General Characteristics Value Item Condition Unit Symbol Min. Typ. Max. Input Voltage Range Vin 18 24 36 V Turn-on Input Voltage Vin=increasing 15 - 18 V Input Voltage difference of 2.0 - - V Turn-on and Turn-off Voltage applied for 1 minute Cutoff Current:1mA 1500 - - Vdc Galvanic Isolation Voltage Ta=25℃±10℃ 60%±15RH Voltage applied Galvanic Isolation Voltage for 1 minute Cutoff Current:1mA 750 Vdc （Input-Base Ta=25℃±10℃ Plate/Output-Base Plate） 60%±15RH 6.2 EMI,Safety Standard Item Standard Note Noise (Radiation, In accordance with VCCI Class A Refer to Test Circuit in clause 10 Conduction) Recognized UL60950(UL/C-UL), UL file No.E190503 Complied IEC 60950 Safety Standard CE Mark is shown on a package CE Marking box. 6.3 Protection Cuircuit Item Value If output is shorted , or output voltage is over the value specified in OVP , or DC-DC converter is heated abnormally, DC-DC converter will enter a hiccup Protection mode where it repeatedly turn on and off. After rejected the abnormal mode, DC-DC converter will automatically restart. However output short, output over voltage, and abnormal heating affect long-term reliability. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.4.9 MYBEA01210CZT DATA Sheet 6 6.4 Specific Characteristics (Ta= -40 to +85℃ with temperature derated.) Test circuit is mentioned in section 7. Value Unit Item Condition Symbol Min. Typ. Max. Vin =Min～Max Output Voltage Vout 11.64 12 12.36 V Iout=Min～Max Output Voltage Adjustable Vout(adj) -20 - +10 % Range Output Current Iout 0 - 10.0 A Ripple Noise Voltage Vripl - - 200 mV(p_p) Vin =24V Efficiency η Iout=10A - 93 - % Ta=25℃ Von 0 - 0.7 V ON/OFF pin Control Voltage Voff 2 - - V Vin =Min～Max Iout=Min～Max RC start up delay time trc - 5 - ms RC connected with –Vin to Vout×90% Setting point of Over OCP Vin =Min～Max 10.3 - - A Current Protection Setting point of Over OVP Vin =Min～Max 14.4 - - V Voltage Protection External Output Ceramic Cout 100 - 2000 μF Capacitance capacitor 6.5 Weight Value Item . Product Name Unit Min Typ. Max. MYBEA01210CZT - 21.4 Weight g MYBEA01210CZTB - 29.7 Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.4.9 MYBEA01210CZT DATA Sheet 7 6.6 To Adjust Output Voltage When TRIM-pin (6pin) is left open, DC-DC converter applies nominal output voltage. Resistors connected between TRIM-pin(6pin) to SENSE(+)-pin (7pin) will increase the output voltage (Vo,adj) between 100% ~ 110% of the nominal output voltage(Vo,nom). (Vout-Up control) Resistors connected between TRIM-pin(6pin) to SENSE(-)-pin (5pin) will decrease the output voltage(Vo,adj) between 80% ~ 100% of the nominal output voltage(Vo,nom). (Vout-Down control) The following equations give the required external-resistor value to adjust the output voltage to Vo,adj. After calculating external resistance, it is necessary to check the output voltage and to adjust of the resistance value at your board conditions. １）When you increase the output voltage,   5.1 Vo100(%)Δ(%) 5.1100(%) Radj- up＝ - -10.22　 kΩ   1.225Δ(%) Δ(%)   where, Vo,adj- Vo,nom Δ 100(%) Vo,nom when you decrease the output voltage, 5.1100(%)  Radj - down＝ -10.22　 kΩ   Δ(%)   where, Vo, nom - Vo, adj Δ 100(%) Vo, nom If you change output voltage, it is necessary to evaluate the characteristics of DC-DC converter at your board conditions. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.4.9 MYBEA01210CZT DATA Sheet 8 6.7 ON/OFF control 1) On control ON/OFF Pin (2Pin) should be connected to Vin(-) Pin (3Pin), or keeps less than 0.7V. 2) Off control ON/OFF Pin (2Pin) should be opened, or the current from ON/OFF Pin (2Pin) to Vin(-) Pin (3Pin) is controlled less than 30uA. MYBEA01210CZT□ 3 2 example Vin(-) ON/OFF or The voltage of maximum 5V appears in the ON/OFF pin at the time of pin opening. 6.8 External input capacitor When a inductance or a switch devise is connected to Input line, or when the transient response of input power supply is bad, input voltage is greatly changed at the time of load sudden change of DC-DC converter. Since the load response of DC-DC converter may not be normally demonstrated by this influence, and DC-DC converter may cause unusual oscillation､in such a case, please connect an external input capacitor. 6.10 Output voltage remote sense It has the remote sense function which corrects a voltage drop by the line drop from the power supply output terminal to the load terminal . A voltage drop by the line drop can be corrected by connecting No.5 pin and No.7 pin to the load terminal part. At the time of a remote sense, a remote sense line is to use a shielding wire, a twist line, a side by side pattern, and so on , and reduce the influence of the noise. A Output Voltage Remote Sense Range is Vout (nom) within +5%. And, use an output voltage within the output adjustment range. Short-circuit No.4 -No.5 terminal and No.7- No.8 terminal respectively when a remote sense shouldn't be necessary. If you use an output voltage remote sense, it is necessary to evaluate the characteristics of DC-DC converter at your board conditions. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.4.9 MYBEA01210CZT DATA Sheet 9 7. Test Circuit In the following test circuit, the initial values in item 6 should be met. Vin(+) Vout(+) 10mΩ 1 8 1mΩ R1 ｖ ｖ ｖ RL C1 MYBEA01210CZT□ Vin ｖ R2 3 Vin(-) Short＝ ON O p e＝ n OFF 2 Vout(-) ON/OFF 4 C1: Low Impedance Electrolytic Capacitor 100μf RL: Electronic Load Device :Model ELL355 KEISOKUGIKEN equivalent Vin: DC Power Supply :Model HP6675A HP equivalent V : Digital Multimeter :Model HP34401A HP equivalent ※When deviating from the above, DC-DC converter may operate abnormally. It should be fully confirmed on your board before use. ※ Ripple Noise Test 50mm DC-DC C1 C2 Terminating resistance LOAD Converter TRC-50F Oscilloscope 1.5m50Ω Coaxial cable BW=150MHz C1 : Ceramic Capacitor 0.1μF C2 : Ceramic Capacitor 10μF Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.4.9 MYBEA01210CZT DATA Sheet 10 ※ Radiation Noise Resistive load 100 24Ｖ １ ３ uF Clamper Clamper※ DCDC Convertor Clamper※ KT10 External input filter (KYORITSU 9pcs MYBEA01210CZT/ 5pcs ４ CORPORATION) ２ MYBEA01210CZTB ※Clamper：ZCAT3035-1330(TDK) ※Conduction Noise Resistive load 100u 24Ｖ １ ３ F LISN DCDC Convertor External input (KNW407) filter MYBEA01210CZT/ ２ ４ MYBEA01210CZTB External input filter 1 PLT10H401 3 4.7uF 4.7uF 4.7uF 4.7uF 4.7uF 2 4 Measurement at Radiation Noise, Conductive Noise, Output ripple & Noise. Please measure Radiation Noise, Conductive Noise and Output ripple & Noise with conforming to the Test Circuit in section 7 Otherwise the noise might not meet the specified values. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.4.9 MYBEA01210CZT DATA Sheet 11 8. Mechanical Tests 8.1 Vibration Vibration frequency ： 10～55Ｈｚ Amplitude ： 1.5mm max 10 to 55Hz，1.5mm amplitude,1 hour for each of X,Y,Z directions. No damage in appearance and no deviation from electrical characteristics. 8.2 Mechanical Shock 20G,1 time for each X,Y,Z directions. No damage in appearance and no deviation from electrical characteristics. 8.3 Soldering Heat Resistance Touch a solder iron to the pin of DC-DC Converter for 3±0.5 seconds. Solder iron : MAX 30W , 350℃ There should be no damage in appearance. Measure the DC-DC Converter after 2 hours and the initial values in item 7 should be met. 8.4 Pull Strength Fasten the body of DC-DC Converter and pull the lead gradually in a radial direction with 5.0N load, keep the load for 5 seconds. The body should not be damaged thereafter. 9. Environmental Tests 1)Humidity Test Subjected to a temperature 40℃土2℃ with 90～95% for 100 hours. Return to room temperature (25℃) for 2 hours and measure. The initial values in item 7 should be met. (JIS-C-0022) 2) Thermal Cycle Test Subjected to 5 cycle of the following. Placed in room temperature (25℃) for 2 hours and are measured. The initial values in item 6 should be met. Step Condition Time 1 -40℃±3℃ 30 minutes 2 Room Temp. 5～10 minutes 3 +85℃±3℃ 30 minutes 4 Room Temp. 5～10 minutes 9.1 MTBF Reliability Prediction (For reference only) MTBF is 2.04million hours = 233 years at 50% nominal output current ,Ambient Temperature Ta=40℃, calculated by Telcordia SR-332. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.4.9 6PS 06PS MYBEA01210CZT DATA Sheet 12 10. Packaging Information 10.1 MYBEA01210CZT 10.1.1 Tray Dimensions DC-DC converters are packaged in the conductive trays. (See Fig.1) Each tray is covered by tray cover.(See Fig.2) 322.5 75.0 75.0 75.0 48.8 6.0 3.5 3.5 3.5 3.5 General tolerance：±1.0 Fig.1 322.6 ESD Mark(IEC60417-5134) 5.0 5.0 刻印2 R5 Tray No. 2 3.0 リサイクル マーク２ Recycle Mark 2 リサイクル マーク1 Recycle Mark 1 A 刻印１ A' Tray No. 1 General tolerance：±1.0 Cross Section A－A’断面図 Fig.2 Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.4.9 14.0 5.0 B' B 0136 21.45 31.0 31.0 31.0 135.9 135.9 Cross Section Ｂ－Ｂ’断面図 MYBEA01210CZT DATA Sheet 13 10.1.2 Pieces of contained products per corrugated box. Maximum contained products pieces 64 pcs/corrugated box. Further plural sheets of corrugated cardboard are placed on the top of the tray cover according to number of contained trays in order to full up the space in a corrugated box. 10. 1.3 Packaging Form ① ② ①Corrugated cardboard 　(Suitable Adjustment) ②Tray　Cover ③ ③Tray Containning products 4 tray max. ① 330 （ ） （68） MURATA PRODUCTS 155 （ ） Lebel Corrugated box Dimension [unit : mm]of corrugated box is reference only. Fig.3 ※ Marking on the box ・MURATA Parts Number ・Quantity ・Inspection No. ・RoHS－Y Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.4.9 MYBEA01210CZT DATA Sheet 14 10.2 MYBEA01210CZTB 10.2.1 Packaging form ①Like the below figure, put the products on a conductive mat. (1row×8column) (See Fig.4) ②Pile these conductive mats and pack maximum 4 units. (See Fig.5) 8pcs in row Conductive matt 1pcs in column Top view Product Corrugated Cardboard（Vary) Bubble wrap （antistatic finish) Product Conductive matt (2sheet) Corrugated Cardboard Side view (1sheet) Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.4.9 MYBEA01210CZT DATA Sheet 15 Item Specification Packaging form typical classification Box Dimensions of packaging box W = 245 ( mm ) H D = 78 ( mm ) H = 104 ( mm ) W D Maximum number in a box 32(pcs) Remark The number of contained products may not reach to the maximum number. Marking on the box 1.MURATA Parts Number 2. Quantity 3. Inspection No. 4. CE Mark 5.ROHS－Y Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.4.9 MYBEA01210CZT DATA Sheet 16 11.Reference data 11 .1 Temperature Derating 11.1.1 No Base Plate MYBEA01210AZT is tested on the evaluation board (size 237x237, 12 layers Cupper), and the output voltage setting is 12V(Trim pin is Open). 237mm 温度測定箇所 Thermal mesurement points A ① B 風 Air flow 12層基板12Layers Cupper Cool the thermal measure points less than 119deg show in the next page. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.4.9 237mm MYBEA01210CZT DATA Sheet 17 11.1.2 With Base Plate MYBEA01210CZTB is tested on the evaluation board (size 101.6x180, 2 layers ) and keep Base Plate surface Temperature under 100degC. The output voltage setting is 12V(Trim pin is Open). Cool the thermal measure points A and B less than 100deg show in the below drawing. Marking of No.1 pin 10.3 34.30 A B Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.4.9 14.2 8.8 MYBEA01210CZT DATA Sheet 18 12. Electrical data(Reference only) 12.1. Efficiency Ta=25℃ 12.2. Output Ripple noise Vin=24Vdc Full Load Ta=25℃ Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.4.9 MYBEA01210CZT DATA Sheet 19 12.3. Remote Control Start Vin=24Vdc Full Load Ta=25℃ RC Signal Output Voltage 12.4. Remote Control Stop Vin=24Vdc Full Load Ta=25℃ RC Signal Output Voltage Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.4.9 MYBEA01210CZT DATA Sheet 20 13 Notice 13.1 Soldering 13.1.1 Flux Please solder the product with Rosin Flux, which contains chlorine 0.2wt% or less. Please do NOT use acid flux or water-soluble flux, which could corrode metals and glass of the product. 13.1.2 Solder Lead Free Solder Please use solder Sn-3Ag-0.5Cu 13.1.3 Please solder under the following condition. ①Flow Solder Preheating ：120±10℃ 60～120 seconds Soldering temperature ：260℃ +0℃/-5℃ Soldering time ：10 seconds max. ②Condition of iron Soldering Preheating ：120±10℃ 30 minutes max Iron temperature ：350℃ max Soldering time ：3 seconds max 13.1.4 Recommendable Solder Land Pattern Pin No Pin Size Hole diameter Land diameter 1.Vin(+) 2.ON/OFF 3.Vin(-) φ1.02 φ1.5 φ3.0 5.Vsens(-) 6.Trim 7.Vsens(+) 4.Vout(-) φ1.57 φ2.0 φ4.0 8.Vout(+) [Unit:ｍｍ] Recommended footprint 50.8±0.25 TROUGH HOLE φ2.0 TROUGH HOLE φ1.5 P PAD φ4.0 PAD φ3.0 P P P=3.81±0.25 P [unit:mm] Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.4.9 MYBEA01210CZT DATA Sheet 21 13.2 Cleaning 13.2 Please don’t clean or wash the products. 13.3 Storage 13.3.1 Please store the products in room where the temperature/humidity is stable and direct sunlight cannot come in and use the products within 6 months after delivery. Avoid damp heated places or such places where there are large temperature changes, because water may condense on the products, the characteristics may be reduced in quality, and/or be degraded in the solderability. If you store the products for a long time (more than 1 year), use caution because the products may be degraded in the solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 13.3.2 Please do not store the products in the places such as: in a dusty place, in a place exposed directly to sea breeze, in an atmosphere containing corrosive gas (Cl2,NH3,SO2,NOX and so on). 13.4 Operational Environment and Operational Conditions 13.4.1 Operational Environment The products are not waterproof, chemical-proof or rustproof. In order to prevent leakage of electricity and abnormal temperature increase of the products, do not use the products under the following circumstances: (1) in an atmosphere containing corrosive gas (Cl2, NH3, SO2, NOX and so on) (2) in a dusty place (3) in a place exposed to direct sunlight (4) in such a place where water splashes or in such a humid place where water condenses (5) in a place exposed to sea breeze (6) in any other places similar to the above (1)through (5) 13.4.2 Operational Conditions Please use the products within specified values (power supply, temperature, input, output and load condition, and so on). Input voltage drop for line impedance, so please make sure that input voltage is included in specified values. If you use the products over the specified values, it may break the products, reduce the quality, and even if the products can endure the condition for short time, it may cause degradation of the reliability. 13.4.3 Note prior to use If you apply high static electricity, over rated voltage or reverse voltage to the products, it may cause defects in the products or degrade the reliability. Please avoid the following items: (1) over rating power supply, reverse power supply or not-enough connection of 0 V(DC)line (2) electrostatic discharge by production line and/or operator (3) electrified product by electrostatic induction Do not give an excessive mechanical shock. If you drop the products on the floor, etc., it may occur a crack to the core of inductors and monolithic ceramic capacitors. Do not give a strong shock such as a drop in handling. Do not bend this product much more than 0.1mm. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.4.9 MYBEA01210CZT DATA Sheet 22 13.5 Transportation If you transport the products, please pack them so that the package will not be damaged by mechanical vibration or mechanical shock, and please educate and guide a carrier to prevent rough handling. If you transport the products to overseas (in particular, by sea), it is expected that the transportation environment will be the worst, so please pack the products, in the package designed on the consideration of mechanical strength, vibration-resistant and humidity-resistant. The package of the products, which Murata sells in Japan, may not resist over sea transport. Please consult us if you are to use the Murata package of the products sold in Japan for transport to overseas. 14 Production factory Wakura Murata Manufacturing.Co.,Ltd. Murata Electronics(Thailand), Ltd. Caution ! 1. Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may be caused by the abnormal function or the failure of our product. 2. Please connect the input terminal by right polarity. If you mistake the connection , it may break the DC-DC converter. In the case of destruction of the DC-DC converter inside, a large input current may flow. Please add a diode and fuse as follows. fuse + + + Load OUT diode IN - - Rated Fuse Current : 12A Please select a diode and fuse after confirming the operation. 3.The intended use 3.1 This product is designed/manufactured for the general applications such as computers, office appliances, communication equipment, machine tools, factory equipment, audiovisual equipment and home appliances, etc. 3.2 Please contact us before using this product for the applications, which require high reliability, such as transportation equipment (aircraft, trains, vehicles, etc.), traffic lights equipment, disaster prevention/crime prevention equipment, etc. 3.3 Please do NOT use this product for the applications which require especially high reliability, such as aerospace equipment, undersea equipment, nuclear power plant control equipment, medical equipment, etc. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.4.9 MYBEA01210CZT DATA Sheet 23 ! Note 1. Please make sure that your product has been evaluated and confirmed against your specifications when our product is mounted to your product. 2. All the items and parameters in this product specification have been prescribed on the premise that our product is used for the purpose, under the condition and in the environment agreed upon between you and us. You are requested not to use our product deviating from such agreement. 3. We consider it not appropriate to include other terms and conditions for transaction warranty in product specifications, drawings or other technical documents. Therefore, if your technical documents as above include such terms and conditions as warranty clause, product liability clause, or intellectual property infringement liability clause, we will not be able to accept such terms and conditions unless they are based on the governmental regulation or they are stated in a separate contract agreement. Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2014.4.9