MURATA POWER SOLUTIONS OKR-T/50-W12-C

OKR-T/50-W12-C www.murata-ps.com Adjustable Output 50-Amp SIP-mount DC-DC Converters T Typical unit ypical unit FEATURES PRODUCT OVERVIEW The OKR-T/50-W12-C series are miniature SIP non-isolated Point-of-Load (PoL) DC-DC power convert-  Wide input range: 6.5V to 13.8V ers measuring only 1.45 x 0.64 x 1.1 inches (36.8 x 16.2 x 27.9 mm). The wide input range is 6.5 to  Wide trim range: 0.6V to 2.5V 13.8 Volts DC. Based on 450 KHz synchronous buck topology, the high power conversion effi cient Point  High power density design means reduced of Load (PoL) module features programmable output voltage and On/Off control, under voltage lock out board space requirement (UVLO), overcurrent and over temperature protections. This unit is designed to meet all standard UL/EN/IEC  60950-1 safety certifi cations and RoHS-6 hazardous substance compliance. Power good output signal (open collector)  Operating ambient temperature up to +70°C with suitable derating and forced air cooling  Remote ON/OFF (active high)  Input undervoltage lockout  RoHS-6 hazardous substance compliance Figure 1. Connection Diagram +Vin +Vout • Switching F1 On/Off Control • Filters Controller • Current Sense External Trim DC Power Reference and Source Error Amplifier Common Common For full details go to www.murata-ps.com/rohs www.murata-ps.com/support MDC_OKR-T/50-W12-C.A05 Page 1 of 14 OKR-T/50-W12-C Adjustable Output 50-Amp SIP-mount DC-DC Converters PERFORMANCE SPECIFICATIONS SUMMARY AND ORDERING GUIDE Output Input IOUT R/N (mVp-p) ➁ Regulation (Max.) IIN, IIN, Effi ciency ➂ VOUT (Amps Power VIN Nom. Range no load full load Root Model (Volts) max) (Watts) Max. Line Load (Volts) (Volts) (mA) (Amps) ➂ Typ. Dimensions ➀ 1.45 x 0.64 x 1.1 OKR-T/50-W12-C 0.6-2.5 50 125 25 ±0.25% ±0.25% 12 6.5-13.8 150 8.5 88.5% (36.8 x 16.2 x 27.9) ➀ Dimensions (L x W x H) are in inches (mm). ➁ Ripple and Noise is shown at Vout = 1.8V. See specs for details. ➂ All specifi cations are at nominal line voltage, Vout = 1.8V and full load, +25°C. unless otherwise noted. Output capacitors are 10μF and two ceramic in parallel. Input cap is 22 μF. See detailed specifi cations. I/O caps are necessary for our test equipment and may not be needed for your application. PART NUMBER STRUCTURE OK R-/ T 50- W12 - C Okami Non-isolated PoL RoHS Hazardous Substance Compliance C = RoHS-6 (does not claim EU RoHS exemption 7b–lead in solder) Wide Input Voltage Range SIP-Mount W12 = 6.5-13.8 Volts Output Voltage Range Maximum Rated Output T = Trimmable, 0.6-2.5 Volts Current in Amps www.murata-ps.com/support MDC_OKR-T/50-W12-C.A05 Page 2 of 14 OKR-T/50-W12-C Adjustable Output 50-Amp SIP-mount DC-DC Converters FUNCTIONAL SPECIFICATIONS ABSOLUTE MAXIMUM RATINGS Conditions Minimum Typical/Nominal Maximum Units Input Voltage, Continuous Full power operation 6.5 12 15 Vdc Output Power 127 W Current-limited, no damage, Output Current 050A short-circuit protected On/Off Control Vin Vdc Power Good Pin 7 Vdc Storage Temperature Range Vin = Zero (no power) -40 125 °C Absolute maximums are stress ratings. Exposure of devices to greater than any of these conditions may adversely affect long-term reliability. Proper operation under conditions other than those listed in the Performance/Functional Specifi cations Table is not implied or recommended. INPUT Operating voltage range 6.5 12 13.8 Vdc Recommended External Fuse Fast blow 40 A Turn On/Start-up threshold Rising input voltage 5.8 6.1 6.4 Vdc Undervoltage Shutdown 4.8 5.3 5.8 Internal Filter Type C-Type Input current Full Load Conditions Vin = nominal (1.8Vset) 8.5 A Low Line Vin @ min, 1.8Vset 15.6 A 2 Inrush Transient 2A -Sec. Short Circuit Input Current 300 mA No Load Input Current 1.8V 150 mA Shut-Down Mode Input Current 20 mA Measured at input with specifi ed fi lter Refl ected (back) ripple current 12 mA, pk-pk Cin = 100μF, Cbus = 1000μF, Lbus = 1μH GENERAL and SAFETY Effi ciency 12Vin, 1.8Vout, 50A 87 88.5 % Certifi ed to UL-60950-1, CSA-C22.2 Safety Yes No.60950-1, IEC/60950-1, 2nd edition Per Telcordia SR332, issue 1 class 3, ground Calculated MTBF 7,476,403 Hours fi xed, Tambient = +25˚C Calculated MTBF Per Mil-HDBK-217N2 Method 11,076,048 Hours DYNAMIC CHARACTERISTICS Fixed Switching Frequency 450 KHz Startup Time 69 mS 1.8Vout (50% Load Step within 2% of Vset @ Dynamic Load Response 25 50 μSec 1A/μS; Cext = 10μF POSCAP) Dynamic Load Peak Deviation 150 200 mV Capacitive Loading Peak Deviation Settling Time 330μF Ceramic 180mV 30 μsec 830μF Cermaic, 1410μF Poscap 120mV 45 μsec FEATURES and OPTIONS Remote On/Off Control Positive Logic, ON state Pin pulled high 1.2 5 V Control Current, ON state 0.04 1.3 mA Positive Logic, OFF state Pin open or pulled low 0 0.7 V Control Current, OFF state open collector/drain 0 6 μA Remote Sense mV Power Good Option PGOOD, Open Drain Confi guration, Sinking: Vout window for PGOOD: Upper limit +8.3 +12.5 +16.2 % Vout window for PGOOD: Lower limit -15 -12.5 -9.2 % www.murata-ps.com/support MDC_OKR-T/50-W12-C.A05 Page 3 of 14 OKR-T/50-W12-C Adjustable Output 50-Amp SIP-mount DC-DC Converters FUNCTIONAL SPECIFICATIONS (CONT.) OUTPUT Conditions Minimum Typical/Nominal Maximum Units Total Output Power 0 125 W Voltage Nominal Output Voltage Range See trim formula 0.6 2.5 Vdc Setting Accuracy At 50% load ±1 % of Vnom. Output Voltage Overshoot-Startup 0.5 % Vo set Current Output Current Range Continuous 0 50 A Current Limit Inception 98% of Vnom., after warmup 55 70 85 A Short Circuit Hiccup technique, autorecovery within ±1% Short Circuit Current 10 A of Vout Short Circuit Duration (remove short for Output shorted to ground, no damage recovery) Regulation Total Regulation Band -3 3 % Vo set Line Regulation Vin = min to max, output @ nominal load ±0.25 % Load Regulation Min load to max load ±0.25 % Ripple and Noise 1.8Vo, 12Vin 15 25 mV pk-pk Temperature Coeffi cient 0.02 % of Vnom./°C Maximum Capacitive Loading 1.8Vo 15000 μF MECHANICAL Outline Dimensions L x W x H 1.45 x 0.64 x 1.1 Inches 36.8 x 16.2 x 27.9 mm Weight 0.70 Ounces 20 Grams ENVIRONMENTAL full power, all output voltages, see derating Operating Ambient Temperature Range 070°C curves Storage Temperature Vin = Zero (no power) -40 125 °C RoHS rating RoHS-6 www.murata-ps.com/support MDC_OKR-T/50-W12-C.A05 Page 4 of 14 OKR-T/50-W12-C Adjustable Output 50-Amp SIP-mount DC-DC Converters OKR-T/50-W12-C PERFORMANCE DATA Effi ciency vs. Line Voltage and Load Current @ 25°C Maximum Current Temperature Derating @ Sea Level Vout = 1.8V (VIN = 12V, VOUT = 1.8V) 51 93 50 91 49 48 89 47 87 46 VIN = 6.5V 45 85 44 1.0 m/s (200 LFM) VIN = 12V 83 43 1.5 m/s (300 LFM) VIN = 13.8V 42 81 2.0 m/s (400 LFM) 41 2.5 m/s (500 LFM) 79 40 3.0 m/s (600 LFM) 39 77 38 75 37 36 73 35 71 34 33 69 32 2468 101214161820222426283032343638404244464850 30 35 40 45 50 55 60 65 70 75 80 85 Load Current (Amps) Ambient Temperature (°C) Thermal reference point 120°C max. Start-up from ENABLE: 1 Vin, 1.5 Vout, 0 A Iout 2100 μF (external Cout: [10 x 22uF]+[4 x Output Ripple and Noise (Vin = 12V, Vout = 1.8V, Iout = 50A, Cout = 10μ, Ta = +25°C) 47uF]). Trace 1 = Vin, Trace 2 = ENABLE, Trace 3 = Vout, Trace 4 =Power Good www.murata-ps.com/support MDC_OKR-T/50-W12-C.A05 Page 5 of 14 Efficiency (%) Output Current (Amps) OKR-T/50-W12-C Adjustable Output 50-Amp SIP-mount DC-DC Converters OSCILLOGRAMS – Vout = 1.8V Step Load Transient Response (Vin = 6.5V, Vout = 1.8V, Cload = 10μF Step Load Transient Response (Vin = 6.5V, Vout = 1.8V, Cload = 10μF POSCAP, Iout = 0A to 25A [5A/μSec]) Top trace = Vout, Bottom trace = Iout POSCAP, Iout = 25A to 50A [5A/μSec]) Top trace = Vout, Bottom trace = Iout Step Load Transient Response (Vin = 12V, Vout = 1.8V, Cload = 10μF Step Load Transient Response (Vin = 12V, Vout = 1.8V, Cload = 10μF POSCAP, Iout = 0A to 25A [5A/μSec]) Top trace = Vout, Bottom trace = Iout POSCAP, Iout = 25A to 50A [5A/μSec]) Top trace = Vout, Bottom trace = Iout Step Load Transient Response (Vin = 13.8V, Vout = 1.8V, Cload = 10μF Step Load Transient Response (Vin = 13.8V, Vout = 1.8V, Cload = 10μF POSCAP, Iout = 0A to 25A [5A/μSec]) Top trace = Vout, Bottom trace = Iout POSCAP, Iout = 25A to 50A [5A/μSec]) Top trace = Vout, Bottom trace = Iout www.murata-ps.com/support MDC_OKR-T/50-W12-C.A05 Page 6 of 14 OKR-T/50-W12-C Adjustable Output 50-Amp SIP-mount DC-DC Converters OSCILLOGRAMS – Vout = 1.5V Step Load Transient Response (Vin = 6.5V, Vout = 1.5V, Cload = 2240μF Step Load Transient Response (Vin = 6.5V, Vout = 1.5V, Cload = 2240μF 15 x 22μF = 330μF ceramic; 5 x 100μF = 500μF ceramic; 3 x 470μF = 1410μF POSCAP, 15 x 22μF = 330uF ceramic; 5 x 100μF = 500μF ceramic; 3 x 470μF = 1410μF POSCAP, Iout = 0A to 25A [5A/μSec]) Top trace = Vout, Bottom trace = Iout Iout = 25A to 50A [5A/μSec]) Top trace = Vout, Bottom trace = Iout Step Load Transient Response (Vin = 12V, Vout = 1.5V, Cload = 2240μF, Step Load Transient Response (Vin = 12V, Vout = 1.5V, Cload = 2240μF, 15 x 22μF = 330μF ceramic; 5 x 100μF = 500μF ceramic; 3 x 470μF = 1410μF POSCAP, 15 x 22μF = 330μF ceramic; 5 x 100μF = 500μF ceramic; 3 x 470μF = 1410μF POSCAP, Iout = 0A to 25A [5A/μSec]) Top trace = Vout, Bottom trace = Iout Iout = 25A to 50A [5A/μSec]) Top trace = Vout, Bottom trace = Iout Step Load Transient Response (Vin = 13.8V, Vout = 1.5V, Cload = 2240μF, Step Load Transient Response (Vin = 13.8V, Vout = 1.5V, Cload = 2240μF, 15 x 22μF = 330μF ceramic; 5 x 100μF = 500μF ceramic; 3 x 470μF = 1410μF POSCAP, 15 x 22μF = 330μF ceramic; 5 x 100μF = 500μF ceramic; 3 x 470μF = 1410μF POSCAP, Iout = 0A to 25A [5A/μSec]) Top trace = Vout, Bottom trace = Iout Iout = 25A to 50A [5A/μSec]) Top trace = Vout, Bottom trace = Iout www.murata-ps.com/support MDC_OKR-T/50-W12-C.A05 Page 7 of 14 OKR-T/50-W12-C Adjustable Output 50-Amp SIP-mount DC-DC Converters OSCILLOGRAMS – Vout = 1.2V Step Load Transient Response (Vin = 6.5V, Vout = 1.2V, Cload = 15 x 22μF/6.3V 1206 Step Load Transient Response (Vin = 6.5V, Vout = 1.2V, Cload = 15 x 22μF/6.3V 1206 ceramic caps for a total of 330μF, Iout = 0A to 25A [5A/μSec]) ceramic caps for a total of 330μF, Iout = 25A to 50A [5A/μSec]) Top trace = Vout, Bottom trace = Iout Top trace = Vout, Bottom trace = Iout Step Load Transient Response (Vin = 12V, Vout = 1.2V, Cload = 15 x 22μF/6.3V 1206 ceramic Step Load Transient Response (Vin = 12V, Vout = 1.2V, Cload = 15 x 22μF/6.3V 1206 ceramic caps for a total of 330μF, Iout = 0A to 25A [5A/μSec]) caps for a total of 330μF, Iout = 25A to 50A [5A/μSec]) Top trace = Vout, Bottom trace = Iout Top trace = Vout, Bottom trace = Iout Step Load Transient Response (Vin = 13.8V, Vout = 1.2V, Cload = 15 x 22μF/6.3V 1206 Step Load Transient Response (Vin = 13.8V, Vout = 1.2V, Cload = 15 x 22μF/6.3V 1206 ceramic caps for a total of 330μF, Iout = 0A to 25A [5A/μSec]) ceramic caps for a total of 330μF, Iout = 25A to 50A [5A/μSec]) Top trace = Vout, Bottom trace = Iout Top trace = Vout, Bottom trace = Iout www.murata-ps.com/support MDC_OKR-T/50-W12-C.A05 Page 8 of 14 OKR-T/50-W12-C Adjustable Output 50-Amp SIP-mount DC-DC Converters MECHANICAL SPECIFICATIONS TOP VIEW INPUT/OUTPUT CONNECTIONS Pin Function J1 Vout+1 J2 Vout+1 J3 Vout+1 J4 PGND J5 PGND J6 Enable END VIEW J7 (-) Trim J8 Trim 16.2 J9 PGood 0.64 J10 -Sense FRONT VIEW J11 +Sense 36.8 11.6 J12 Vin+ 1.45 0.46 J13 Vin+ J14 Mechanical Support J15 Mechanical Support 27.9 1.10 2.92±0.25 2x 0.115±0.010 12345 678 910 11 12 13 2.06 14 15 0.081 0.76±0.05 2.00 13x 0.030±0.002 1.35 0.079 TYP 0.053 1.27 6.7 2x 0.050 20.00 2.85±0.25 0.27 0.787 13x 0.112±0.010 4.39 26.00 10.3 0.173 1.024 0.41 34.29 1.350 DIMENSIONS ARE IN INCHES [mm] TOLERANCES: 2 PLACE 0.02 ANGLES: 1 3 PLACE 0.010 COMPONENTS SHOWN ARE FOR REFERENCE ONLY MATERIAL: 0.030 HEADER PINS: COPPER ALLOY SUPPORT PINS: TIN PLATED BRASS Dimensions are in inches (mm shown for ref. only). FINISH: (ALL HEADER PINS) Third Angle Projection 200μ" MIN MATTE TIN OVER NICKEL (40μ" MIN) Tolerances (unless otherwise specified): .XX ± 0.02 (0.5) .XXX ± 0.010 (0.25) Angles ± 2˚ Components are shown for reference only. www.murata-ps.com/support MDC_OKR-T/50-W12-C.A05 Page 9 of 14 OKR-T/50-W12-C Adjustable Output 50-Amp SIP-mount DC-DC Converters MECHANICAL SPECIFICATIONS 37.34 1.470 0.89±0.08 13x 0.035±0.003 1.52 34.29 0.060 1.350 1.98±0.08 2x 0.078±0.003 2.06 0.081 2.06 0.081 5.92 17.96 0.233 12.12 0.707 0.477 2.00 0.079 TYP 4.39 26.00 0.173 1.024 www.murata-ps.com/support MDC_OKR-T/50-W12-C.A05 Page 10 of 14 OKR-T/50-W12-C Adjustable Output 50-Amp SIP-mount DC-DC Converters STANDARD PACKAGING )2$03$'6 ($&+67$7,&',66,3$7,9( 32/<(7+