MURATA POWER SOLUTIONS PWR1301AC

PWR13xxC www.murata-ps.com 1.5 Watts Unregulated DC/DC Converters FEATURES ■■ ROHS COMPLIANT ■■ HIGH ISOLATION - 4000V RATING ■■ 8000V ISOLATION TEST VOLTAGE ■■ BARRIER 100% PRODUCTION TESTED ■■ LOW BARRIER CAPACITANCE - 10pF ■■ LOW LEAKAGE CURRENT - 2μA MAX ■■ 24-PIN DIP PACKAGE ■■ INTERNAL FILTERING APPLICATIONS PRODUCT OVERVIEW The PWR13XXC Series offers a broad line of Reliability is further enhanced by the use of ■■ BIOMEDICAL DATA ACQUISITION low-cost, high-isolation voltage, unregulated, MOSPOWER transistors. These rugged devices ■■ INDUSTRIAL PROCESS CONTROL single and dual output DC/DC converters in a permit higher frequency operation with less ■■ ANALYTICAL MEASUREMENTS 24-pin DIP package. These small converters complicated drive circuitry than is possible with offer a 4000V isolation rating in a 1.25" x bipolar power transistors. Reduced parts count ■■ GROUND LOOP ELIMINATION 0.8" package area. adds to the reliability of the PWR13XXC Series. ■■ INTRINSIC SAFETY SYSTEMS The dielectric withstand characteristics of The high efficiency of the PWR13XXC Series each converter is tested in production to ensure means less internal power dissipation. With barrier integrity. During the development of the less heat to dissipate, the PWR13XXC Series PWR13XXC Series extensive testing was done can operate over a wider ambient temperature to verify that subjecting the barrier to as many range with no degradation of reliable operation. as ten barrier tests will not destroy the barrier. The PWR13XXC Series offers the user low The PWR13XXC Series uses advanced circuit cost without sacrificing reliability. The use of design and packaging technology to realize surface mounted devices and manufacturing superior reliability and performance. A 220kHz technologies make it possible to offer premium driven push-pull oscillator is used to ensure performance and low cost. Testing of the stable frequency and non-saturating operation PWR13XXC isolation barrier is performed per of the input stage. This means there are no the methods set forth by UL544, VDE750, CSA high peak voltages or currents like other design 22.2 and IEC 601-1. topologies, which can reduce unit reliability. ISO9001 CERTIFIED For full details go to www.murata-ps.com/rohs www.murata-ps.com/support MDC_PWR13xxC.C02 Page 1 of 4 PWR13xxC 1.5 Watts Unregulated DC/DC Converters ELECTRICAL SPECIFICATIONS Specifications typical at T = +25°C, nominal input voltage, rated output current unless otherwise noted. A INPUT CURRENT NOMINAL RATED RATED REFLECTED INPUT VOLTAGE OUTPUT VOLTAGE OUTPUT CURRENT NO LOAD RATED LOAD RIPPLE CURRENT MODEL (VDC) (VDC) (mA) (mA) (mA) (mAp-p) PWR1300AC 5 5 300 50 400 30 PWR1301AC 5 12 125 50 400 30 PWR1302AC 5 15 100 50 400 30 PWR1303AC 5 ± 5 ±150 50 400 30 PWR1304AC 5 ±12 ±63 50 400 30 PWR1305AC 5 ±15 ±50 50 400 30 PWR1306AC 12 5 300 30 167 25 PWR1307AC 12 12 125 30 167 25 PWR1308AC 12 15 100 30 167 25 PWR1309AC 12 ± 5 ±150 30 167 25 PWR1310AC 12 ±12 ±63 30 167 25 PWR1311AC 12 ±15 ±50 30 167 25 PWR1312AC 15 5 300 30 133 20 PWR1313AC 15 12 125 30 133 20 PWR1314AC 15 15 100 30 133 20 PWR1315AC 15 ± 5 ±150 30 133 20 PWR1316AC 15 ±12 ±63 30 133 20 PWR1317AC 15 ±15 ±50 30 133 20 COMMON SPECIFICATIONS Specifications typical at T = +25°C, rated input voltage, rated output current unless otherwise noted. A PARAMETER CONDITIONS MIN TYP MAX UNITS INPUT Voltage Range 4.5 5 5.5 VDC 10.8 12 13.2 VDC 13.5 15 16.5 VDC ISOLATION Rated Voltage 4,000 VDC Test Voltage 60 Hz, 60 Seconds 8,000 Vpk Resistance 10 GW Capacitance 10 pF Leakage Current VISO= 240VAC, 60Hz 1 2 µArms OUTPUT Rated Power 1.5 Watts Voltage Setpoint Accuracy Rated Load, Nominal Vin ±5 % Ripple & Noise BW = DC to 10MHz 40 mVp-p BW = 10Hz to 2MHz 10 mVrms REGULATION Line Regulation High Line to Low Line 1.5 %/% Load Regulation See Performance Curves GENERAL Efficiency 75 % Switching Frequency 220 kHz Package Weight 12 g MTTF per MIL-HDBK-217, Rev. E Circuit Stress Method Ground Benign TA = +25°C 2,000,000 Hr TA = +85°C 90,000 Hr Fixed Ground TA = +35°C 540,000 Hr Naval Sheltered TA = +35°C 300,000 Hr Airborne Uninhabited Fighter TA = +35°C 55,000 Hr TEMPERATURE Specification -40 +25 +85 °C Storage -55 +110 °C www.murata-ps.com/support MDC_PWR13xxC.C02 Page 2 of 4 PWR13xxC 1.5 Watts Unregulated DC/DC Converters ORDERING INFORMATION ABSOLUTE MAXIMUM RATINGS PWR 13XX A C Output Short-Circuit Duration ..................................................... 5 seconds Internal Power Dissipation .............................................................. 750mW Device Family Lead Temperature (soldering, 10 seconds max) .............................+300°C PWR indicates DC/DC converter Model Number Selected from Table of Electrical Characteristics Package RoHS Compliant MECHANICAL TOP VIEW PIN CONNECTIONS PIN SINGLE MODELS DUAL MODELS 1 +V +V IN IN 2 +V +V IN IN 1.270±0.010" 11 +V +V OUT OUT (32.26) 12 +V +V OUT OUT 13 -V Common OUT 14 -V Common OUT SIDE VIEW 15 No Pin -V OUT 0.400±0.010" 23 -V -V IN IN (10.16) .010±0.005" 24 -V -V IN IN (0.25) 0.170" MIN Notes: 0.100±0.015" .020±0.002" (4.32) All dimensions are in inches (millimeters). (2.54) (0.51) GRID: 0.100 inches (2.54 millimeters) * Common pins not present on single output models. BOTTOM VIEW PIN PLACEMENT TOLERANCE: ± 0.015" 1 2 11 12 Marked with: specific model ordered, date code, job code. MATERIAL: Units are encapsulated in a low thermal resistance molding compound which has excellent chemical resistance, wide operating temperature range, and good electrical properties under high humidity environments. The encapsulant and outer shell of the unit have UL94V-0 ratings. Lead material is matte tin 100 microinches .1025" min., over nickel, 40-80 microinches. (.267) 24 23 15 14 13 SOLDERING INFORMATION The PWR13XXC devices are intended for wave soldering or manual soldering. They are not intended to be subject to surface mount processes under any circumstances. The normal wave soldering process can be used with these devices where the device is subjected to a maximum wave temperature of 260°C for a period of no more than 10 seconds. Within this time and temperature range, the integrity of the device’s plastic body will not be compromised and internal temperatures within the converter will not exceed 175°C. Care should be taken to control manual soldering limits identical to that of wave soldering. www.murata-ps.com/support MDC_PWR13xxC.C02 Page 3 of 4 .805±0.010" (20.45) 0.600" (15.23) PWR13xxC 1.5 Watts Unregulated DC/DC Converters TYPICAL PERFORMANCE CURVES ° Specifications at T = +25 C, nominal input voltage, rated output current A V VS LOAD V VS LOAD V VS LOAD OUT OUT OUT (5VOUT MODELS) (12VOUT MODELS) (15VOUT MODELS) 5.8 14.00 16.00 5.6 13.50 15.75 5.4 13.00 15.50 5.2 12.50 15.25 5.0 12.0 15.0 0 25% 50% 75% 100% 0 25% 50% 75% 100% 0 25% 50% 75% 100% Load (% of Rated) Load (% of Rated) Load (% of Rated) V VS LOAD V VS LOAD V VS LOAD OUT OUT OUT (±15VOUT MODELS) (±5VOUT MODELS) (±12VOUT MODELS) 16.00 5.8 14.00 5.6 15.75 13.50 15.50 5.4 13.00 15.25 12.50 5.2 5.0 15.0 12.00 0 25% 50% 75% 100% 0 25% 50% 75% 100% 0 25% 50% 75% 100% Load (% of Rated) Load (% of Rated) Load (% of Rated) This product is subject to the following operating requirements Murata Power Solutions, Inc. and the Life and Safety Critical Application Sales Policy: 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Refer to: http://www.murata-ps.com/requirements/ ISO 9001 and 14001 REGISTERED Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2017 Murata Power Solutions, Inc. www.murata-ps.com/support MDC_PWR13xxC.C02 Page 4 of 4 V (VDC) V (VDC) OUT OUT V (VDC) V (VDC) OUT OUT V (VDC) V (VDC) OUT OUT