N2POWER N2POWER XL125 AC-DC SERIES XL125 SERIES 125 Watt Open Frame Power Supply POWER SOLUTIONS ULTRA SMALL, HIGH EFFICIENCY POWER SUPPLIES Measures: 5.00 x 3.00 x 1.25” POWER SUPPLY DESIGN LEADER N2Power continues to lead the power density race with its new small, high efficiency XL125 Series AC-DC power supplies. Our patented technology yields a very small footprint, reduces wasted power, and offers the highest power density in the marketin the 125 watt range. This unique design means reduced energy costs, a greater return on your investment, higher reliability and longer product life. HIGHLIGHTS .225 5.00 (5.7) (127.0) 4.55 • .225 125 W AC-DC (115.6) (5.7) • Up to 92% Efficiency • 3 High Power Density: 6.7 W / in Typical Mechanical Drawing: • Universal AC input XL125 AC - DC Inches (millimeters), connectors and 3.00 2.55 Height = 1.25 (31.8) (76.2) (64.8) pinouts may vary with model. Refer to • Active PFC (90-264 VAC) XL125 Product Specification for Safety ground connection point • Built in OR-ing Diodes for N+1 (Optional) complete information. at plated through hole • 3” X 5” Small Footprint • <1U High: 1.25" Lock washer Screws shown for reference only • No Load Operation 1.25 1.00 0.06 0.19 • RoHS Compliant (31.8) (25.4) (1.5) (4.8) Printed Circuit Board HIGH EFFICIENCY IN A SMALL PACKAGE Reduced heat generation and greater reliability are key design REPEATABLE QUALITY requirements. The XL125 Series provides up to 92% efficiency We use advanced PCB technology to deliver the highest density and in a 125 watt power supply. Our unique design reduces energy best performance in the industry. Our packaging design incorporates consumption and generates less waste heat. It requires little SMT technology to automate processes, ensure reliability, and reduce forced air cooling, decreases AC loads and increases reliability cost. Each power supply undergoes a complete functional test and a and economy of operation. multi-hour burn-in to insure that every unit meets our stringent quality requirements. Detailed statistical production records are maintained and UNMATCHED POWER DENSITY rigid quality and AVL control insures the highest quality product With an overall height of 1.25" and a 3" x 5" footprint, the XL125 available. Each power supply design is also rigorously tested by UL, with Series boasts a power density of 6.7 watts per cubic inch. It is scheduled factory audits to ensure ongoing compliance. ideally suited for OEMs using industry standard 1U chassis. N2Power’s small form factor power supplies allow you to work PFC READY, SAVE ENERGY with additional “real estate” for more functionality inside your Many countries already require Power Factor Corrected (PFC) power product. Decreased space, reduced thermal loads and lower supplies, which lessen loads at generating stations. All XL125 products costs will increase your competitive edge in the market. incorporate active PFC technology with universal input to provide superior efficiency in each supply. Comparisons of power loading show that our supplies can reduce consumption up to 50%. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/n2power-XL125-power-supply.html h t t p: / / pow e r. sa ge r. c om 1 1 1 N2POWER N2POWER XL125 AC-DC SERIES XL125 SERIES POWER SOLUTIONS 125 Watt Open Frame Power Supply ULTRA SMALL, HIGH EFFICIENCY POWER SUPPLIES Measures: 5.00 x 3.00 x 1.25” PART REGULATION MAXIMUM RIPPLE & MODEL OUTPUT VOLTAGE NUMBER (%) CURRENT (A) NOISE (P-P) XL125-03 400010-03-9 V1 3.3 ±3 32.0 50 mV XL125-03 CS 400010-01-3 V2 12 ±5 0.5 120 mV XL125-05 400003-08-3 V1 5 ±3 25.0 50 mV XL125-05 CS 400003-01-8 V2 12 ±5 0.5 120 mV XL125-12 400004-67-7 V1 12 ±3 10.4 120 mV XL125-12 CS 400004-61-0 V2 12 ±5 1.0 120 mV XL125-15 400005-62-5 V1 15 ±3 8.3 150 mV XL125-15 CS 400005-61-7 V2 12 ±5 1.0 120 mV XL125-24 400006-68-0 V1 24 ±3 5.2 240 mV XL125-24 CS 400006-61-5 V2 12 ±5 1.0 120 mV XL125-28 400006-66-4 V1 28 ±3 4.5 280 mV XL125-28 CS 400006-64-9 V2 12 ±5 1.0 120 mV XL125-48 400007-63-9 V1 48 ±3 2.6 480 mV XL125-48 CS 400007-61-3 V2 12 ±5 1.0 120 mV V1 3.3 ±2 10.0 50 mV V2 5 ±4 15.0 50 mV XL125-1 400002-61-4 V3 12 ±5 5.0 120 mV V4 –12 ±5 1.0 120 mV V1 2.5 ±2 13.2 50 mV V2 5 ±4 15.0 50 mV XL125-7 400008-61-1 V3 12 ±5 5.0 120 mV V4 –12 ±5 1.0 120 mV V1 5 ±4 16.5 50 mV XL125-8 400009-61-9 V2 12 ±5 5.0 120 mV V3 –12 ±5 1.0 120 mV CS = Current Sharing OUTPUT SPECIFICATIONS OPERATING SPECIFICATIONS INPUT SPECIFICATIONS 125 W Operating Temperature: –25 to +50 C Total Power: Nominal Input Voltage: 100 – 240 VAC ˚ Hold-up Time: Temperature Derating: 2.5% / degree C to 70 C Minimum 28 mS Maximum AC Input: 90 – 264 VAC ˚ at all input voltages Storage Temperature: –40 to +85 C Input Frequency Range: 47 – 63 Hz ˚ † Efficiency: Up to 92% Forced Air Cooling: 5 CFM Input Current: 1.8 A @ 100 VAC † Minimum Load: No load Convection Cooling: See Product Input Protection: 3.15 A fuse Specification Over / Under Shoot: Maximum 10% at turn-on Safety Isolation: 3000 VAC input to output MTBF: 627,221 hours @ 25 C* 1500 VAC input to ground ˚ Inrush Current: 33 A @ 115 VAC PROTECTION SIGNALS †Δ Overvoltage Protection: On all main outputs Leakage Current: <.75 mA Remote Sense: On main output Power Factor Active PFC circuitry, meets Overpower Protection: Protected / Auto-recovery Current Sharing: Active current sharing Correction: or exceeds EN61000-3-2 with OR-ing diode Short Circuit Protection: All outputs protected †Δ or MOSFETs against short circuit 1 Compliance: † Power Good: Provided Thermal Shutdown: Protected against USA/Canada: † Safety: Underwriters Laboratories: UL 60950-1:2007 (2nd Edition) / overtemperature conditions PS_OK: Output C22.2 No. 60950-1-07 Safety of Information Technology † LED: Some models Equipment (ITE) † See Product Specification EMC: FCC part 15, subpartB See MTBF Report for additional temperature values * 1 Europe: See Product Specification for additional information International: 2006/95/EC - “Low Voltage (Safety) Directive” IEC 60950-1:2005 (2nd Edition) Safety of Information Technology Demko: EN 60950-1:2006+A11:2009 Equipment nd (2 Edition) 2004/108/EC “Electromagnetic Compatibility (EMC) Directive” IEC 61204-3 Class B EN 61204-3 Class B For complete specifications on all models, please visit our website at: www.qualstar.com All information and specifications are based on our Qualstar and the Qualstar logo are registered XL125 products are protected by knowledge of the products at the time of printing. trademarks of Qualstar Corporation. N2Power patent number 6, 163, 139. N2Power reserves the right to change specifications and the N2Power logo are trademarks of Qualstar without notice. Corporation. All other trademarks are the property of their respective owners. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 QUALSTAR CORPORATION power@sager .com http://power.sager.com/n2power-XL125-power-supply.html h t t p: / / pow e r. sa ge r. c om 3990-B Heritage Oak Court Simi Valley, CA 93063 NASDAQ: QBAK www.qualstar.com Tel: 805-583-7744 Fax: 805-583-7749