Pushbutton Switch (Cylindrical 30-dia.) ZAP CSM_ZAP_DS_E_4_1 Long Service Life with Built-in Z-series Basic Switch • Using a Basic Switch enables direct switching of large-capacity loads Shock-absorbing construction of Operation Unit protects the Switch Drip-proof Pushbutton construction enab les use in locations subject to splashing water and oil and scattering dust. Pushbuttons are available in three shapes and six colors. Refer to Safety Precautions for All Pushbutton Switches/ Indicators and Safety Precautions on page 3. Ordering Information Operation Unit color Shape of Operation Classification Output Unit Blue (-A) Black (-B) Green (-G) Red (-R) White (-W) Yellow (-Y) 1 ZAP-A ZAP-B ZAP-G ZAP-R ZAP-W ZAP-Y 36 dia. 25 dia. 2 2ZAP-A 2ZAP-B 2ZAP-G 2ZAP-R 2ZAP-W 2ZAP-Y 1 ZAP-1A ZAP-1B ZAP-1G ZAP-1R ZAP-1W ZAP-1Y Momentary 36 dia. 25 dia. operation 2 2ZAP-1A 2ZAP-1B 2ZAP-1G 2ZAP-1R 2ZAP-1W 2ZAP-1Y 1 ZAP-2A ZAP-2B ZAP-2G ZAP-2R ZAP-2W ZAP-2Y 40 dia. 2 2ZAP-2A 2ZAP-2B 2ZAP-2G 2ZAP-2R 2ZAP-2W 2ZAP-2Y Note: Models with special specifications are available for use in environments with high humidity or outdoors. Contact your OMRON representative for information. Specifications Ratings Item Non-inductive load (A) Inductive load (A) Rated voltage (V) Resistive load Lamp load Inductive load Motor load Built-in Switch NC NO NC NO NC NO NC NO 125 VAC 15 3 1.5 15 5 2.5 200 VAC 15 2.5 1.25 15 3 1.5 500 VAC 10 1.5 0.75 6 1.5 0.75 8 VDC 15 3 1.5 15 5 2.5 Z-15G5-B 14 VDC 15 3 1.5 10 5 2.5 30 VDC 6 3 1.5 5 5 2.5 125 VDC 0.5 0.5 0.5 0.05 0.05 0.05 250 VDC 0.25 0.25 0.25 0.03 0.03 0.03 Note: 1. The above values are for steady-state currents. 2. Inductive load: Power factor = 0.4 (AC); time constant = 7 ms (DC). 3. The lamp load has an inrush current of 10 times the steady-state current. 4. The motor load has an inrush current of 6 times the steady-state current. 5. Standard testing condition. (1) Ambient temperature: 20 ±2°C (2) Ambient humidity: 65% ±5%RH (3) Operating frequency: 20 times/min 1 ZAP Specifications Characteristics Operating Characteristics Operat- Mechanical 60 operations/min Model ZAP-@@ 2ZAP-@@ ing fre- Operating characteristics Electrical 20 operations/min quency Approx. 5.88 to Approx. 9.81 to Operating force OF Insulation resistance 100 MΩ min. (at 500 VDC) 14.71 N 17.70 N Contact resistance 30 mΩ max. (initial value) Note: Operating force may vary depending on thickness of mounting panel. Between terminals of same 1,000 VAC, 50/60 Hz for 1 min polarity Contact Form Dielectric Between current-carrying metal part strength Name Contact form 2,000 VAC, 50/60 Hz for and ground, and between each termi- 1 minute NC nal and non-current-carrying metal part Double-throw contacts COM NO Vibra- 10 to 55 Hz, 1.5-mm double tion re- Malfunction amplitude (1 ms max.) sistance Approved Safety Standards 2 Destruction 500 m/s Shock re- • The built-in Z-15G5-B Switch is approved for UL and CSA. 2 sistance Malfunction 200 m/s max. (1 ms max.) Mechanical 1,000,000 operations min. Durabili- ty Electrical 500,000 operations min. Weight Approx. 130 to 210 g NC 30 A max. Inrush current NO 15 A max. −25 to 80°C (with no icing or Ambient operating temperature condensation) Ambient operating humidity 35% to 85%RH −25 to 80°C (with no icing or Ambient storage temperature condensation) Degree of protection IP65 (Operation Unit only) Electric shock protection class Class II PTI (proof tracking index) 175 Pollution degree 3 (IEC947-5-1) Dimensions Insert one of the following letters into the box (@) at the end of the model number. Refer to Ordering Information for color symbols. (Unit: mm) Mounting panel thickness: ZAP-@ 1.6 to 6 mm ZAP-@ 2ZAP-@ Z-15G5-B Basic Switch Rubber packing 2ZAP-@ Washer 26 24.6 36 dia. 25 dia. 25 dia. 49.2 52 24.6 26 37 * 9.75 43.5 19 51.8 max. Three, M4 ✕ 5.5 10.8 t Terminal screws 40 dia. (with toothed washer) * Chromed plating ZAP-1@ ZAP-2@ 2ZAP-1@ 2ZAP-2@ 40 dia. 36 dia. 36 dia. 25 dia. Mounting panel thickness: * * Mounting panel thickness: 1.6 to 6 mm 1.6 to 6 mm t t 27.6 15.8 * Chromed plating * Chromed plating 2 ZAP Dimensions (Unit: mm) Panel Cutouts Accessories Rubber Cap 5.2 dia. • Use the special rubber cap to use the Switch in locations subject to significant splashing water and oil or scattering dust. 15 Cannot be used, however, with the (2) ZAP-2. 30.5±0.3 dia. hole Color Model Blue (-A) ZB-A Black (-B) ZB-B Green (-G) ZB-G Red (-R) ZB-R White (-W) ZB-W Yellow (-Y) ZB-Y Safety Precautions Refer to Safety Precautions for All Pushbutton Switches/Indicators. Precautions for Correct Use Insulation • After wiring the Switch, ensure an appropriate insulating distance. Wiring • Tighten the terminal screws to a torque of 0.78 to 1.18 N·m. Mounting • Tighten the face nut to a torque of 0.98 to 1.76 N·m. • For panel mounting, always use a washer (or a nameplate) and rubber packing. Washer (or nameplate) Rubber packing Mounting panel t = 1.6 to 6 mm 3 Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. part of all quotes, agreements, purchase orders, acknowledgments, price lists, BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE catalogs, manuals, brochures and other documents, whether electronic or in PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR writing, relating to the sale of products or services (collectively, the "Products") INTENDED USE. Omron further disclaims all warranties and responsibility of by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron any type for claims or expenses based on infringement by the Products or oth- objects to any terms or conditions proposed in Buyer’s purchase order or other erwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obli- documents which are inconsistent with, or in addition to, these Terms. gation hereunder shall be, at Omron’s election, to (i) replace (in the form 2. Prices; Payment Terms. All prices stated are current, subject to change with- originally shipped with Buyer responsible for labor charges for removal or out notice by Omron. Omron reserves the right to increase or decrease prices replacement thereof) the non-complying Product, (ii) repair the non-complying on any unshipped portions of outstanding orders. Payments for Products are Product, or (iii) repay or credit Buyer an amount equal to the purchase price of due net 30 days unless otherwise stated in the invoice. the non-complying Product; provided that in no event shall Omron be responsi- 3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices ble for warranty, repair, indemnity or any other claims or expenses regarding sent to Buyer after deducting transportation charges, taxes and duties, and will the Products unless Omron’s analysis confirms that the Products were prop- be allowed only if (i) the invoice is paid according to Omron’s payment terms erly handled, stored, installed and maintained and not subject to contamina- and (ii) Buyer has no past due amounts. tion, abuse, misuse or inappropriate modification. Return of any Products by 4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or Buyer must be approved in writing by Omron before shipment. Omron Compa- the maximum legal rate, whichever is less, on any balance not paid within the nies shall not be liable for the suitability or unsuitability or the results from the stated terms. use of Products in combination with any electrical or electronic components, 5. Orders. Omron will accept no order less than $200 net billing. circuits, system assemblies or any other materials or substances or environ- 6. Governmental Approvals. Buyer shall be responsible for, and shall bear all ments. Any advice, recommendations or information given orally or in writing, costs involved in, obtaining any government approvals required for the impor- are not to be construed as an amendment or addition to the above warranty. tation or sale of the Products. See http://www.omron247.com or contact your Omron representative for pub- 7. Taxes. All taxes, duties and other governmental charges (other than general lished information. real property and income taxes), including any interest or penalties thereon, 14. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE imposed directly or indirectly on Omron or required to be collected directly or FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, indirectly by Omron for the manufacture, production, sale, delivery, importa- LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY tion, consumption or use of the Products sold hereunder (including customs WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS duties and sales, excise, use, turnover and license taxes) shall be charged to BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. and remitted by Buyer to Omron. Further, in no event shall liability of Omron Companies exceed the individual 8. Financial. If the financial position of Buyer at any time becomes unsatisfactory price of the Product on which liability is asserted. to Omron, Omron reserves the right to stop shipments or require satisfactory 15. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and security or payment in advance. If Buyer fails to make payment or otherwise their employees from and against all liabilities, losses, claims, costs and comply with these Terms or any related agreement, Omron may (without liabil- expenses (including attorney's fees and expenses) related to any claim, inves- ity and in addition to other remedies) cancel any unshipped portion of Prod- tigation, litigation or proceeding (whether or not Omron is a party) which arises ucts sold hereunder and stop any Products in transit until Buyer pays all or is alleged to arise from Buyer's acts or omissions under these Terms or in amounts, including amounts payable hereunder, whether or not then due, any way with respect to the Products. Without limiting the foregoing, Buyer (at which are owing to it by Buyer. Buyer shall in any event remain liable for all its own expense) shall indemnify and hold harmless Omron and defend or set- unpaid accounts. tle any action brought against such Companies to the extent based on a claim 9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation that any Product made to Buyer specifications infringed intellectual property unless Buyer indemnifies Omron against all related costs or expenses. rights of another party. . Omron shall not be liable for any delay or failure in delivery Any intellectual property in the Products is the exclu- 10. Force Majeure 16. Property; Confidentiality. resulting from causes beyond its control, including earthquakes, fires, floods, sive property of Omron Companies and Buyer shall not attempt to duplicate it strikes or other labor disputes, shortage of labor or materials, accidents to in any way without the written permission of Omron. Notwithstanding any machinery, acts of sabotage, riots, delay in or lack of transportation or the charges to Buyer for engineering or tooling, all engineering and tooling shall requirements of any government authority. remain the exclusive property of Omron. All information and materials supplied 11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron: by Omron to Buyer relating to the Products are confidential and proprietary, a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship and Buyer shall limit distribution thereof to its trusted employees and strictly except in “break down” situations. prevent disclosure to any third party. b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall 17. Export Controls. Buyer shall comply with all applicable laws, regulations and constitute delivery to Buyer; licenses regarding (i) export of products or information; (iii) sale of products to c. All sales and shipments of Products shall be FOB shipping point (unless oth- “forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of erwise stated in writing by Omron), at which point title and risk of loss shall regulated technology or information. pass from Omron to Buyer; provided that Omron shall retain a security inter- 18. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right est in the Products until the full purchase price is paid; and no course of dealing between Buyer and Omron shall operate as a waiver d. Delivery and shipping dates are estimates only; and of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder e.Omron will package Products as it deems proper for protection against nor- without Omron's written consent. (c) Law. These Terms are governed by the mal handling and extra charges apply to special conditions. law of the jurisdiction of the home office of the Omron company from which 12. Claims. Any claim by Buyer against Omron for shortage or damage to the Buyer is purchasing the Products (without regard to conflict of law princi- Products occurring before delivery to the carrier must be presented in writing ples). (d) Amendment. These Terms constitute the entire agreement between to Omron within 30 days of receipt of shipment and include the original trans- Buyer and Omron relating to the Products, and no provision may be changed . If any provi- portation bill signed by the carrier noting that the carrier received the Products or waived unless in writing signed by the parties. (e) Severability from Omron in the condition claimed. sion hereof is rendered ineffective or invalid, such provision shall not invalidate 13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the any other provision. (f) Setoff. Buyer shall have no right to set off any amounts Products will be free from defects in materials and workmanship for a period of against the amount owing in respect of this invoice. (g) Definitions. As used twelve months from the date of sale by Omron (or such other period expressed herein, “including” means “including without limitation”; and “Omron Compa- in writing by Omron). Omron disclaims all other warranties, express or implied. nies” (or similar words) mean Omron Corporation and any direct or indirect (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, subsidiary or affiliate thereof. EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL- Certain Precautions on Specifications and Use 1. Suitability of Use. Omron Companies shall not be responsible for conformity ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROP- with any standards, codes or regulations which apply to the combination of the ERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE Product in the Buyer’s application or use of the Product. At Buyer’s request, OVERALL EQUIPMENT OR SYSTEM. Omron will provide applicable third party certification documents identifying 2. Programmable Products. Omron Companies shall not be responsible for the ratings and limitations of use which apply to the Product. This information by user’s programming of a programmable Product, or any consequence thereof. itself is not sufficient for a complete determination of the suitability of the Prod- 3. Performance Data. Data presented in Omron Company websites, catalogs uct in combination with the end product, machine, system, or other application and other materials is provided as a guide for the user in determining suitabil- or use. Buyer shall be solely responsible for determining appropriateness of ity and does not constitute a warranty. It may represent the result of Omron’s the particular Product with respect to Buyer’s application, product or system. test conditions, and the user must correlate it to actual application require- Buyer shall take application responsibility in all cases but the following is a ments. Actual performance is subject to the Omron’s Warranty and Limitations non-exhaustive list of applications for which particular attention must be given: of Liability. (i) Outdoor use, uses involving potential chemical contamination or electrical 4. Change in Specifications. Product specifications and accessories may be interference, or conditions or uses not described in this document. changed at any time based on improvements and other reasons. It is our prac- (ii) Use in consumer products or any use in significant quantities. tice to change part numbers when published ratings or features are changed, (iii) Energy control systems, combustion systems, railroad systems, aviation or when significant construction changes are made. However, some specifica- systems, medical equipment, amusement machines, vehicles, safety equip- tions of the Product may be changed without any notice. When in doubt, spe- ment, and installations subject to separate industry or government regulations. cial part numbers may be assigned to fix or establish key specifications for (iv) Systems, machines and equipment that could present a risk to life or prop- your application. Please consult with your Omron’s representative at any time erty. Please know and observe all prohibitions of use applicable to this Prod- to confirm actual specifications of purchased Product. uct. 5. Errors and Omissions. Information presented by Omron Companies has been NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS checked and is believed to be accurate; however, no responsibility is assumed RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT for clerical, typographical or proofreading errors or omissions. ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO OMRON AUTOMATION AND SAFETY • THE AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com OMRON CANADA, INC. • HEAD OFFICE OMRON ARGENTINA • SALES OFFICE Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com Cono Sur • 54.11.4783.5300 OMRON ELECTRONICS DE MEXICO • HEAD OFFICE OMRON CHILE • SALES OFFICE México DF • 52.55.59.01.43.00 • 01-800-226-6766 • mela@omron.com Santiago • 56.9.9917.3920 OMRON ELECTRONICS DE MEXICO • SALES OFFICE OTHER OMRON LATIN AMERICA SALES Apodaca, N.L. • 52.81.11.56.99.20 • 01-800-226-6766 • mela@omron.com 54.11.4783.5300 OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br OMRON EUROPE B.V. • Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. • +31 (0) 23 568 13 00 • www.industrial.omron.eu Authorized Distributor: Automation Control Systems • Machine Automation Controllers (MAC) • Programmable Controllers (PLC) • Operator interfaces (HMI) • Distributed I/O • Software Drives & Motion Controls • Servo & AC Drives • Motion Controllers & Encoders Temperature & Process Controllers • Single and Multi-loop Controllers Sensors & Vision • Proximity Sensors • Photoelectric Sensors • Fiber-Optic Sensors • Amplified Photomicrosensors • Measurement Sensors • Ultrasonic Sensors • Vision Sensors Industrial Components • RFID/Code Readers • Relays • Pushbuttons & Indicators • Limit and Basic Switches • Timers • Counters • Metering Devices • Power Supplies Safety • Laser Scanners • Safety Mats • Edges and Bumpers • Programmable Safety Controllers • Light Curtains • Safety Relays • Safety Interlock Switches CSM_ZAP_DS_E_4_1 07/13 Note: Specifications are subject to change. © 2014 Omron Electronics LLC Printed in U.S.A. Printed on recycled paper.