Knob-type Selector Switch (Detachable) (Cylindrical 16-dia.) A165S/W CSM_A165S_W_DS_E_4_3 Separate Construction with Cylindrical 16-dia. Body • Same separate construction as the A16-series Pushbuttons with Miniature Design of 28.5 mm • The same contacts can be used for both standard loads and microloads. • Oil-resistant IP65 models • Conforms to EN60947-5-1. Refer to Safety Precautions for All Pushbutton Switches/ Indicators and Safety Precautions on page 15. List of Models Model Rectangular Square Round Solder A165@-J Series A165@-A Series A165@-T Series terminals Voltage- reduction A165@-J Series A165@-A Series A165@-T Series lighting Screw- less A165@-J Series A165@-A Series A165@-T Series clamp connector 1 A165S/W Model Number Structure Model Number Legend ..... The model numbers used to order sets of Units are illustrated below. One set comprises the Selector, Lamp (lighted models only), and Switch. For information on combinations, refer to Ordering Information on page 3. (1) (2) (3) (4) (5) (6) A165W - A 2A R - 24D - 1 (6) Contact Configuration Symbol Type Terminal 1 SPDT Solder terminal (1) Lighted/ 2DPDT Non-lighted 1P SPDT PCB terminal 2P DPDT Symbol Type 2S DPDT Screw-less Clamp Non- S lighted Note: 1. Only DPDT contacts are available with 3-notch models and Screw-less Clamp W Lighted models. (3) Number of Notches/ (4) Color of Selector 2. PCB terminals are available only with Resetting Method Symbol Color 2-notch models. (2) Shape of No. of Reset Black Selector Symbol No (5) Light Source notches method (non-lighted symbol Symbol Shape models only) Symbol Type Manual 2M Rectan- RRed No symbol Non-lighted J 2 notches gular Automatic G Green 24D 24-V LED 2A A Square YYellow T Round Manual 3M Voltage Reduction Unit (24-V Built-in LED) 3 notches Automatic 3A Symbol Type Operating voltage Rated voltage T1 100/110 VAC/VDC 110 VAC/VDC LED T2 200/220 VAC/VDC 220 VAC/VDC Note: 1. Solder terminals are only available with 100-V models. 2. The Voltage Reduction Unit is not available for models with PCB terminals. 3. "T2" is available only for the Screw-less Clamp type. 2 A165S/W Ordering Information Ordering as a Set .................The model numbers used to order sets of Units are given in the following tables. One set comprises the Selector, Lamp (lighted models only), and Switch. Solder Terminals Rectangular A165@-J Oil-resistant IP65 No. of notches Output Reset method Lighting method Model LED A165W-J2M@-24D-1 Manual Non-lighted A165S-J2M-1 SPDT LED A165W-J2A@-24D-1 Automatic Non-lighted A165S-J2A-1 2 notches LED A165W-J2M@-24D-2 Manual Non-lighted A165S-J2M-2 DPDT LED A165W-J2A@-24D-2 Automatic Non-lighted A165S-J2A-2 LED A165W-J3M@-24D-2 3 notches DPDT Manual Non-lighted A165S-J3M-2 Note: Enter the desired color symbol for the Selector in @: R (red); Y (yellow); G (green). The Selector for non-lighted models is black. Square A165@-A Oil-resistant IP65 No. of notches Output Reset method Lighting method Model LED A165W-A2M@-24D-1 Manual Non-lighted A165S-A2M-1 SPDT LED A165W-A2A@-24D-1 Automatic Non-lighted A165S-A2A-1 2 notches LED A165W-A2M@-24D-2 Manual Non-lighted A165S-A2M-2 DPDT LED A165W-A2A@-24D-2 Automatic Non-lighted A165S-A2A-2 LED A165W-A3M@-24D-2 3 notches DPDT Manual Non-lighted A165S-A3M-2 Note: Enter the desired color symbol for the Selector in @: R (red); Y (yellow); G (green). The Selector for non-lighted models is black. Round A165@-T Oil-resistant IP65 No. of notches Output Reset method Lighting method Model LED A165W-T2M@-24D-1 Manual Non-lighted A165S-T2M-1 SPDT LED A165W-T2A@-24D-1 Automatic Non-lighted A165S-T2A-1 2 notches LED A165W-T2M@-24D-2 Manual Non-lighted A165S-T2M-2 DPDT LED A165W-T2A@-24D-2 Automatic Non-lighted A165S-T2A-2 LED A165W-T3M@-24D-2 3 notches DPDT Manual Non-lighted A165S-T3M-2 Note: Enter the desired color symbol for the Selector in @: R (red); Y (yellow); G (green). The Selector for non-lighted models is black. 3 A165S/W Ordering Information Ordering Individually......... Selectors, Lamps, and Switches can be ordered separately. Combinations that are not available as sets can be created using individual Units. Also, store the parts as spares for maintenance and repairs. Selector (Listed on Page 5.) Rectangular Models Square Models Round Models Lighted Models Non-lighted Models Lamp LED only Note: Temperature rises in incandescent lamps can cause heat deformation. Switch (Listed on Page 7.) Solder terminals PCB terminals (no transformer) Lighted/non-lighted Lighted/non-lighted Note: Switch Units that combine a Lamp and a Switch are also available. 4 A165S/W Ordering Information Ordering Individually .........Selectors, Lamps, and Switches (Sockets) can be ordered separately. Combinations that are not available as sets can be created using individual Units. Also, store the parts as spares for maintenance and repairs. Selectors (Oil-resistant IP65 Models Only) Number of Selector color Appearance Reset method Lighting method Model notches symbol Rectangular LED A165W-J2M@ Manual (A165@-J) Non-lighted A165S-J2M 2 notches Enter the desired color LED A165W-J2A@ symbol for the Selec- Automatic Non-lighted A165S-J2A tor in @. R (red), LED A165W-J3M@ Manual Y (yellow), Non-lighted A165S-J3M G (green) 3 notches LED A165W-J3A@ Fully automatic Non-lighted A165S-J3A Square LED A165W-A2M@ Manual (A165@-A) Non-lighted A165S-A2M 2 notches Enter the desired color LED A165W-A2A@ symbol for the Selec- Automatic Non-lighted A165S-A2A tor in @. R (red), LED A165W-A3M@ Manual Y (yellow), Non-lighted A165S-A3M G (green) 3 notches LED A165W-A3A@ Fully automatic Non-lighted A165S-A3A Round LED A165W-T2M@ Manual (A165@-T) Non-lighted A165S-T2M 2 notches Enter the desired color LED A165W-T2A@ symbol for the Selec- Automatic Non-lighted A165S-T2A tor in @. R (red), LED A165W-T3M@ Manual Y (yellow), Non-lighted A165S-T3M G (green) 3 notches LED A165W-T3A@ Fully automatic Non-lighted A165S-T3A Note: The selector for non-lighted models is black. 5 A165S/W Ordering Information Sets .............................................. Select an Operation Unit and a Switch Unit (Lamp and Switch). Operation Unit Set with Knob-type Selector Switch Rectangular Models Square Models Round Models Lighted Models Lighted/Non-lighted Models Switch Unit with Voltage-reduction Lighting Switch Unit with Screw-less Clamp Connectors Lamp Lamp Voltage- reduction Lighting Lighted/ Non-lighted Models Note: The LED has a 24-VAC/VDC circuit Note: Non-lighted models do not include a built in. Lamp. Switch Units (A Switch Unit includes a Switch and a Lamp.) Appearance Number of notches Classification Model SPDT A16W-2N@-24D-1 2 notches DPDT A16W-2N@-24D-2 24 V Solder terminals 3 notches DPDT A16W-3N@-24D-2 Switch Units with Voltage Reduction Units (Solder Terminals) Appearance Classification Operating voltage Model 2 notches SPDT A16L-@-T1-1 Standard loads and 100/110 VAC/VDC microloads 2 notches A16L-@-T1-2 DPDT 3 notches A16W-3N@-T1-2 Note: The LED has a 24-VAC/VDC circuit built in. Insert one of the following letters into the box (@). Symbol Light color RRed YYellow G Green 6 A165S/W Ordering Information Switch Units with Screw-less Clamp Connectors Appearance Classification Model Remarks Non-lighted A16-2S Used for Pushbutton No voltage-reduction lighting A16L-Δ-@-2S 2 notches Switches and DPDT Knob-type Selector Lighted 100/110 VAC/VDC A16L-Δ-T1-2S Voltage-reduction Standard Switches. lighting 200/220 VAC/VDC A16L-Δ-T2-2S loads and Non-lighted A16S-3N-2LS microloads No voltage-reduction lighting A16W-3NΔ-@-2S 3 notches DPDT Lighted 100/110 VAC/VDC A16W-3N-Δ-T1-2S Voltage-reduction lighting 200/220 VAC/VDC A16W-3N-Δ-T2-2S Note: The 100-V models and 200-V models have a 24-VAC/VDC Insert symbols in Δ and @. circuit built in. Δ @ Symbol Light color Symbol Type Operating voltage R Red 5D 5 VDC Y Yellow 12D LED 12 VAC/VDC G Green 24D 24 VAC/VDC Ordering Individually Switches Appearance Classification Model SPDT A16S-2N-1L 2 notches Lighted DPDT A16S-2N-2L 3 notches DPDT A16S-3N-2L Solder terminal SPDT A16S-2N-1 2 notches Switches (without Non-lighted DPDT A16S-2N-2 voltage-reduction 3 notches DPDT A16S-3N-2 lighting) SPDT A16S-2N-1LP Lighted DPDT A16S-2N-2LP 2 notches PCB terminal SPDT A16S-2N-1P Non-lighted DPDT A16S-2N-2P Lamps Operating voltage Super-bright 5 VDC 12 VAC/VDC 24 VAC/VDC Light color Red A16-5DSR A16-12DSR A16-24DSR Yellow A16-5DSY A16-12DSY A16-24DSY Green A16-5DSG A16-12DSG A16-24DSG Accessories and Tools (Order Separately) Accessories Name Appearance Classification Model Remarks Rectangular A16ZJ-3003 Used for covering the panel cut- Panel Plugs Square A16ZA-3003 outs for future panel expansion. Degree of protection: IP40 Round A16ZT-3003 Tools Applicable types Name Appearance Model Remarks Pushbutton Knob-type Key-type Emergency Indicator Switch Selector Switch Selector Switch Stop Switch Convenient for ganged installation. Screw Fitting A16Z-3004 Yes Yes Yes Yes Yes Tighten to a torque of 0.39 N·m min. Convenient for Extractor A16Z-5080 Yes Yes Yes Yes Yes extracting the Switches and Lamps. ■ Specifications and dimensions: Refer to pages 8 to 10. Ordering as a Set: Refer to page 3. ■ Accessories, replacements, and tools: Refer to this page 7 A165S/W Specifications Approved Standard Ratings UL, cUL (File No. E41515) TÜV (EN60947-5-1) (Low Voltage Directive) CCC (GB14048.5) 5 A at 125 VAC, 3 A at 250 VAC (general use) 3 A at 250 VAC 5 A at 125 VAC 3 A at 30 VDC 3 A at 250 VAC 3 A at 30 VDC (resistive) 3 A at 30 VDC Note: Certification has been obtained for the Switch. For detailed information on individual products that have received certification, consult your supplier. Ratings Switch Ratings Contact Form Rated voltage Resistive load Name Contact form 125 VAC 5 A NC SPDT COM 250 VAC 3 A NO 30 VDC 3 A Minimum applicable load: 1 mA at 5 VDC Super-bright LED Rated values are obtained from tests conducted under the following conditions. Rated Rated Operating Internal limiting 1. Load: Resistive load 2. Mounting conditions: No vibration and no shock voltage current voltage resistor 3. Temperature: 20±2°C Red, yellow: 300 Ω 4. Operating frequency: 20 times/min 5 VDC 5 VDC±5% Green: 160 Ω 8 mA Red, yellow: 1 kΩ 12 VAC/VDC 12 VAC/VDC±5% Green: 910 Ω 24 VAC/VDC 24 VAC/VDC±5% 2.4 kΩ Characteristics Socket Unit Screw-less Clamp Item Type Knob-type Selector Switch Item Type Screw-less Clamp Allowable Mechanical 20 operations/minute max. Recommended 2 0.5 mm twisted wire or 0.8 mm-dia. solid wire operating wire size Electrical 10 operations/minute max. frequency Twisted 2 2 2 2 0.3 mm 0.5 mm 0.75 mm 1.25 mm Usable Insulation resistance 100 MΩ min. (at 500V DC) wire wires Contact resistance 100 mΩ max. (initial value) Solid and 0.5 mm dia. 0.8 mm dia. 1.0 mm dia. --- wire Between termi- tensile nals of same 1,000 VAC, 50/60 Hz for 1 min Tensile strength 10 N 20 N 30 N 40 N polarity strength Between ter- Length of exposed 10 ±1 mm minals of dif- 2,000 VAC, 50/60 Hz for 1 min wire Dielectric ferent polarity Compliant strength JIS C 2811 Terminal Blocks for Industrial Use Between each standards terminal and 2,000 VAC, 50/60 Hz for 1 min ground Operating Characteristics Between lamp 1,000 VAC, 50/60 Hz for 1 min* terminals Knob-type Selector Switch Type Vibration 10 to 55 Hz, 1.5-mm double amplitude Characteristics 2 notches 3 notches Malfunction resistance (malfunction within 1 ms) Operating torque (OF) max. 0.1 N·m 2 Destruction 500 m/s max. Shock +10 Set position (SP) 90±5° 45° 2 0 150 m/s max. resistance Malfunction (malfunction within 1 ms) Mechanical 250,000 operations min. Durability Electrical 100,000 operations min. Electric shock protection Class II class PTI (tracking characteristic) 175 Degree of contamination 3 (IEC60947-5-1) Approx. 13 g Weight (in the case of a lighted DPDT switch) Ambient operating −10°C to 55°C temperature (with no icing or condensation) Ambient operating 35% to 85%RH humidity Ambient storage −25°C to 65°C temperature (with no icing or condensation) * With LED not mounted. (Perform testing with the LED not mounted.) 8 A165S/W Specifications Operation Angle Contact Form Two notches Three notches Contact from (75°) FP No. of SPDT DPDT (45°) (45°) 90° notches 45° 45° Posi- Posi- FP SW SW2 SW1 tion tion 2 notches Note: The angle used for automatic reset is shown in parentheses. 3 notches --- FP: Free Position SW2 SW1 Nomenclature Model structure Selector ●Flange Shape ●Color of Selector Rectangular · LED models (A165@-J) Red Yellow Green · Non-lighted models Black Square ●Lighting Method (A165@-A) · Lighted (LED) models (The upper face of the knob is illuminated.) · Non-lighted models Round (A165@-T) ●Number of Notches and Reset Method · 2 Notches: Manual reset, Automatic reset · 3 Notches: Manual reset, Automatic reset ●Protective Structure Oil-resistant IP65 Switch ●Switch Specifications 5 A at 125 VAC 5 A at 250 VAC 3 A at 30 VDC ●Terminal Type Minimum applicable load: Solder terminals 1 mA at 5 VDC PCB terminals The flange can be rotated to easily change the operation angle of the knob. For information on rotating the flange, refer to page 14. Example: Knob-type Selector Switch with Two Notches FP (75°) 90° 90° 90° (Standard condition when shipped) Note: The angle is 75° for self-resetting models. 9 A165S/W Dimensions • The Dimension shows 2-switch outputs. • The lamp terminal is not provided with non-lighted models. (Unit: mm) M16×1 Rectangular A165@-J Solder terminals (tab terminals #110) 18 12.2 4 Lamp terminal 10.8 9.5 21.1 18.5 28.5 24 6 18 4.85 12.4 15.8 Model, ratings, standard Packing (t0.5) Mounting nut Note: See page 12 for panel cutouts. Lock ring M16×1 Square A165@-A Solder terminals (tab terminals #110) 12.2 18 4 Lamp terminal 10.8 9.5 21.1 18 18.5 28.5 6 4.85 12.4 15.8 18 Model, ratings, standard Packing (t0.5) Mounting nut Note: See page 12 for panel cutouts. Lock ring M16×1 Round A165@-T Solder terminals (tab terminals #110) 12.2 18 4 Lamp terminal 10.8 9.5 21.1 18 18.5 28.5 6 18 4.85 12.4 15.8 Model, ratings, standard Packing (t0.5) Mounting nut Note: See page 12 for panel cutouts. Lock ring 10 A165S/W Dimensions • The Dimension shows 2-switch outputs. • A rectangular model is listed as an example. (Unit: mm) M16×1 Rectangular A165@-J PCB terminals 20.4 18.4 6.3 0.5 4 10.8 9.5 21.1 24 18.5 28.3 • The lamp terminal is not 18 4.85 12.4 18.6 also provided with non- 0.5 lighted models. Mounting nut Note: See page 12 for panel cutouts. Packing (t0.5) Lock ring Rectangular A165W@-T 50.1 42.7 Reduced-voltage lighting 18.5 28.5 solder terminals 9.5 21.1 10.8 (tab terminals #110) Panel Cutouts 4 +0.2 Direction-indication arrow 24 min. 0.5 16 dia. 0 12.2 9.8 18 0.5 Selector 0.5 M16×1 23 min. Case Lock ring Packing (t0.5) Mounting nut 6 Switch (22.4) 8.8 16.6 18 20.6 2.8 2.8 12.4 24 Rectangular A165@-2S Screw-Less Clamp 48.9 18.5 10.8 Panel Cutouts 9.5 42 +0.2 25 min. 16 dia. 0 24 23.9 M16×1 6 Switch dismounting lever Lock ring 33 min. Mounting nut 18 (31.7) 27.4 23.5 • The lamp terminal is also provided with non- lighted models. Packing (t0.5) 24 11 6 A165S/W Dimensions (Unit: mm) Panel Cutouts Models with Solder Terminals and Models with Screw-less Clamp Connectors Rectangular A165@-J Square A165@-A, Round A165@-T (Top View) (Top View) +0.2 16 dia. 0 19 min. 24 min. +0.2 16 dia. 0 (25 min.) (25 min.) 19 min. 19 min. (33 min.) (33 min.) Note: 1. Make sure the thickness of the mounting panel is 0.5 to 3.2 mm. 2. If the panel is to be finished with coating, etc., make sure that the panel meets the specified dimensions after coating. 3. Figures in parentheses are for screw-less clamp connectors. Models with PCB Terminals Rectangular A165@-J Square A165@-A, Round A165@-T (Top View) (Top View) +0.2 24 min. +0.2 16 dia. 0 16 dia. 0 24 min. 9.1±0.05 9.1±0.05 14.7±0.05 dia. 24 min. 24 min. 14.7±0.05 dia. 5.1±0.05 5.1±0.05 Note: 1. Ensure that the variation in the distance between the centers of neighboring mounting holes is less than ±0.1 mm. 2. Make sure the thickness of the mounting panel is 0.5 to 3.2 mm. If, however, a Switch Guard or Dust Cover is used, the thickness of the mounting panel must be 0.5 to 2 mm. 3. If the panel is to be finished with coating, etc., make sure that the panel meets the specified dimensions after coating. Terminal Arrangement Models with Solder Terminals without Reduced-voltage Lighting (Lamp terminals are not provided with the Non-lighted Knob-type Selector Switches and Key-type Selector Switches.) Lighted SPDT Switches Lighted DPDT Switches Terminal Arrangement Terminal Arrangement (Bottom View) (Bottom View) Dimensions of Dimensions of Terminal Holes Terminal Holes NC NC NC L- L- NO NO NO 2.6 7.4 2.6 7.4 0.9 0.9 COM COM COM SW1 SW2 SW1 12.2 1.5 12.2 1.5 Lamp terminal 18 2.8 Lamp terminal 18 2.8 Note: The L+ is not shown Note: The L+ is not shown on the Switch. on the Switch. Non-lighted SPDT Switches Non-lighted DPDT Switches Terminal Arrangement Terminal Arrangement (Bottom View) (Bottom View) Side with TOP Side with TOP indicated indicated Dimensions of Dimensions of Terminal Holes Terminal Holes 2.6 2.6 7.4 7.4 NC NC NC 0.9 0.9 NO NO NO 12.2 12.2 1.5 1.5 COM COM COM 18 18 2.8 2.8 SW1 SW1 SW2 12 A165S/W Dimensions (Unit: mm) Models with PCB Terminals Lighted SPDT Switches Lighted DPDT Switches Terminal Arrangement Terminal Arrangement Model, rating, and lot number indication (Bottom View) (Bottom View) Side with TOP Dimensions of Dimensions of Side with TOP indicated indicated PCB Terminals PCB Terminals 5.3 5.3 3.5 3.5 NC NC NC L- L- 1.5 1.5 NO NO NO COM COM COM 0.8 0.8 SW1 SW1 SW2 4.85 4.85 2.7 2.7 12.4 12.4 18.6 18.6 Lamp terminal (t=0.5) Lamp terminal (t=0.5) PCB Cutouts PCB Cutouts (Bottom View) (Bottom View) Side with TOP indicated Side with TOP indicated A±0.1 A±0.1 12.4±0.05 12.4±0.05 20±0.1 20±0.1 4.85±0.05 4.85±0.05 L±0.1 L±0.1 6.3±0.05 6.3±0.05 Five, 1 dia. Two, 5 dia. 6.3±0.05 Two, 5 dia. A = 24 min.: Rectangular A = 24 min.: Rectangular A = 21 min.: Square/Round A = 21 min.: Square/Round L = 24 min. L = 24 min. Use t = 1.6 for the PCB. Use t = 1.6 for the PCB. Eight, 1 dia. Note: Secure the panel to the board using stud bolts if force will Note: Secure the panel to the board using stud bolts if force will be applied to the board after wiring. be applied to the board after wiring. Note: For details of the terminal arrangement for Screw-Less Clamps, refer to the corresponding section for the A16. 13 A165S/W Dimensions (Unit: mm) Non-lighted Models with PCB Terminals (Lamp terminals are not provided with the Non-lighted Knob-type Selector Switches and Key-type Selector Switches.) Non-lighted SPDT Switches Non-lighted DPDT Switches Terminal Arrangement Terminal Arrangement (Bottom View) (Bottom View) Model, rating, and lot Dimensions of Dimensions of Side with TOP number indication Side with TOP PCB Terminals indicated PCB Terminals indicated 5.3 5.3 NC NC NC 3.5 3.5 NO 1.5 1.5 NO NO COM COM COM SW1 SW1 SW2 0.8 0.8 12.4 12.4 2.7 2.7 18.6 18.6 PCB Cutouts PCB Cutouts (Bottom View) (Bottom View) Side with TOP indicated Side with TOP indicated A±0.1 A±0.1 20±0.1 20±0.1 12.4±0.05 12.4±0.05 L±0.1 L±0.1 6.3±0.05 6.3±0.05 Three, 1 dia. 6.3±0.05 Two, 5 dia. Two, 5 dia. A = 24 min.: Rectangular A = 24 min.: Rectangular A = 21 min.: Square/Round A = 21 min.: Square/Round L = 24 min. L = 24 min. Use t = 1.6 for the PCB. Use t = 1.6 for the PCB. Six, 1 dia. Note: Secure the panel to the board using stud bolts if force will Note: Secure the panel to the board using stud bolts if force will be applied to the board after wiring. be applied to the board after wiring. For details on mounting the Switch to a panel, and mounting and dismounting the Switch, refer to installation details for the A16 Pushbutton Switch. Flange Rotation (All Selector Switches) A165 Knob-type Selector Switch A165 Key-type Selector Switch Fix the Switch screw and rotate the flange in Fix the Switch screw and rotate the flange in 45° turns. 45° turns. Flange Flange Lock ring Lock ring Switch screw Switch screw 14 A165S/W Safety Precautions Refer to Safety Precautions for All Pushbutton Switches/Indicators. WARNING Do not apply a voltage between the incandescent Using the Microload lamp and the terminal that is greater than the rated • Insert a contact protection circuit, if necessary, to prevent the voltage. If the incandescent lamp is broken, the reduction of life expectancy due to extreme wear on the contacts operating part may pop out. caused by loads where inrush current occurs when the contact is opened and closed. Always turn OFF the power and wait for 10 minutes • The A16 allows both a standard load (125 V at 5A, 250 V at 3 A) before replacing the incandescent lamp. If the lamp is and a microload. If a standard load is applied, however, the replaced immediately after the power is turned OFF, microload area cannot be used. If the microload area is used with a the remaining heat may cause burns. standard load, the contact surface will become rough, and the opening and closing of the contact for a microload may become unreliable. • The minimum applicable load is the N-level reference value. This Precautions for Correct Use value indicates the malfunction reference level for the reliability Mounting level of 60% (λ 60) (conforming to JIS C5003). -6 • Always make sure that the power is turned OFF before mounting, The equation, λ 60 = 0.5 × 10 /operations indicates that the removing, or wiring the Switch, or performing maintenance. estimated malfunction rate is less than 1/2,000,000 operations with • Do not tighten the mounting nut more than necessary using tools a reliability level of 60%. such as pointed-nose pliers. Doing so will damage the mounting nut. The tightening torque is 0.29 to 0.49 N·m. 0.15 mA 30 Wiring • Solder terminals and quick-connect terminals (#110) are commonly used for terminals. 24 • Be sure to use electrical wires that are a size appropriate for the applied voltage and carry current (conductor size is 0.5 to 0.75 Microload area 2 mm ). Perform soldering according to the conditions provided below. If the soldering is not properly performed, the lead wires will 12 become detached, resulting in short-circuits. Invalid 1. Hand soldering: 350°C, within 3 s area 2. Dip soldering: 350°C, within 3 s 5 1 mA Wait for one minute after soldering before exerting any external 0 force on the solder. 0.1 1 10 100 1,000 • Use non-corrosive resin fluid as the flux. Current (mA) • Make sure that the electric cord is wired so that it does not touch LED the Unit. If the electric cord touches the Unit, then electric wires with a heat resistance of 100°C min. must be used. • The LED current-limiting resistor is built-in, so external resistance • After wiring the Switch, maintain an appropriate clearance and is not required. creepage distance. Rated voltage Internal limiting resistor Operating Environment Red, yellow: 300 Ω 5 VDC • The IP65 model is designed with a degree of protection so that it Green: 160 Ω will not sustain damage if it is subjected to water from any direction Red, yellow: 1 kΩ 12 VAC/VDC to the front of the panel. Green: 910 Ω 24 VAC/VDC 2.4 kΩ 15 Voltage (V) A165S/W Others • The oil-resistant IP65 uses NBR rubber and is resistant to general cutting oil and cooling oil. Some particular oils cannot be used with the oil-resistant IP65, however, so contact your OMRON representative for details. • If the panel is to be finished with coating, etc., make sure that the panel meets the specified dimensions after the coating. • Do not subject the Switch to extreme shock or vibration. Doing so will cause malfunctions and damage to the Switch. Do not let sharp objects come into contact with the Switches that are made of resin. Doing so will damage the Switches, causing scratches on the outside of the operating parts, and malfunction. When handling the Switches, do not throw or drop them. Do not allow the Switch to drop and hit the ground. Do not place or drop heavy objects on the Switch. Do not operate the Switch with hard or sharp objects. Hammer Screwdriver 16 Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 2015.9 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2015 All Right Reserved.