Sensing Distance Amplifiers E3S-X3, E3X, E3XA, E3A2-X, E3XR, E3C-X Fiber-optic Cables E32 Extensive Selection of Fiber-optic Sensing Heads Offers Many Unique Solutions for Tough Problems � Fiber-optic sensors detect small, fast-moving objects in space-confined installations and harsh environments � For a custom fit in the field, most plastic filament cables can be cut to length � For detection in hard-to-reach places, sensing heads with bendable stainless steel tubing retain complex shapes � Coiled and ultra-flexible cables are ideal for flexing and reciprocating machinery such as robots � Periscope sensing heads or accessories save space in right angle detection � Convergent beam sensing heads allow accurate positioning, even for shiny objects � Narrow detection zone of concentric beam sensing heads helps eliminate background objects and gives consistant sensing, regardless of object direction � Most fiber cables offer IP67 protection and temperature ratings of -40°Cto 70°C (-40°F to 158°F) E32 E32 Application Examples Detect small holes in machine Detecting presence of printed Detects metal or non-metal Detects when tape roll has parts circuit board components chips within a sensing area as reached selected diameter large as 2 x 11-mm Chips need not be in a straight line. Outputs a signal when selected Sensor, used vertically, will detect diameter is reached. object as tiny as 1.3 mm. Ordering Information � THROUGH-BEAM TYPE General Purpose Pa art Nu umbe ber Appearanc ea a ce e Cabl Cab e e Lengt e g h S Se ens sing g Minimu um Fiber Material Rem e a arks s D Diist tance O Ob bje j ct t Size Si Core Sheath 2m E32-T11 18 cm (7 in) 0.5 mm PMMA PE 1.5 mm ID fiber 1 m (3.28 ft) (0.02 in) dia. Ultra flexible cable M4 threaded head with E39-F1 x 11.7 mm (0.46 in) L E32-T11L 35 cm (13.8 in) 1.4 mm ID fiber 1 m (3.28 ft) M4 threaded head x with E39-F1 11.7 mm (0.46 in) L lens kit E32-T12L 35 cm 1 mm ID fiber (13.8 in) 3 mm dia. (0.12 in) x 14 mm (0.55 in) E32-T17L 10 m 7m (23ft) 1 mm ID fiber Long distance M4 threaded head x 23 mm (0.91 in) L E32-T21 2m 5 cm (1.97 in) 0.2 mm Plastic 0.5 mm ID fiber (0.01 in) dia. extra Ultra flexible cable M3 threaded head x 11 mm (0.43 in) L flexible E32-T21L 10 cm PE 0.5 mm ID fiber (3.94 in) M3 threaded head x 9 mm (0.35 in) L E32-T22 5cm (2in) 0.5 mm ID fiber Easy to align 2 mm dia. (0.8 in) x 22 mm (0.87 in) E32-T22L 10 cm 0.5 mm ID fiber (3.94 in) 2 mm dia. (0.8 in) x 22 mm (0.87 in) E32-TC50 50 cm (19 in) 20 0 c cm (7. ( 8 88 8 in) ) 1 mm ID fib ber e 1 1 m ( (3 3.2 28 8 ft) ft) L Low costt, generall E32-TC200 2 m (6.4 ft) M4 M4 threaded threaded h head ead x x w wiitth h E E3 39 9- -F F1 1 p pur urp po os se e 14 mm (0.55 in) L E32-TC500 5 m (16.4 ft) lle ens ns k kiitt E32-TC1000 10 m (32.8 ft) E32 E32 Pa art Nu umbe ber Appearanc ea a ce e Cabl Cab e e Lengt e g h S Se ens sing g Minimu um Rem e a arks s Fiber Material D Diist tance O Ob bje j ct t Size Si Core Sheath E32-TC200A 2m 12 cm (4.72 in) 0.2 mm PMMA PE 1 mm ID fiber (0.01 in) dia. M3 threaded head x 12.5 mm (0.49 in) L E32-TC200C Coiled 56.5 10 cm (3.9 in) cm (22.2) L; 60 cm (2.0 ft) 2 m extended with E39-F1 M4 threaded head x lens kit 11 mm (0.43 in) L E32-TC200E 2m 3.5 cm 0.5 mm ID fiber (1.38 in) Easy to align M3 threaded head x 11 mm (0.43 in) L Armored Type Fiber Material Part Number Appearance Cable Lengt g h Sensing g Minimum Remarks D Diist tance O Ob bje j ct t Size Si Core Sheath E32-UTAT1-3F 0.91 m (3 ft) 20 cm (7.9 in) 0.2 mm Glass Stainless General purpose (0.01 in) dia. steel Can withstand tte em mperat eratu ures res t to o 150°C (302°F) 5/16 -- 24 thread x E32-UTAT1-6F 1.83 m (6 ft) 17 cm (6.7 in) 3.8 mm (1.5 in) L E32-UTBT1-3F* 0.91 m (3 ft) 40 cm (15.7 0.25 mm General purpose in in) ) (0. (0.0 01 1 iin n) ) d diia a Can Can w wiit th hs st ta and nd 5/16-- 24 thread x 38.1 temperatures to E32-UTBT1-6F* 1.83 m (6 ft) mm (1.5 in) L 200°C (392°F) *For use with E3JU-X only Probe Type Part Number Appearance Cable Lengt g h Sensing g Minimum Fiber Material Remarks D Diist tance O Ob bje j ct t Size Si Core Sheath 0.8 mm dia 2m PMMA PE E32-T33-1 15 mm 0.15 mm 0.25 mm ID fiber (0.59 in) (0.06 in) dia. Ultra small sensing 3mmdia 18 cm (7 in) 0.2 mm E32-TC200B 1 mm ID fiber (0. (0.0 01 1 iin n) ) d diia a. . Probe = 90 mm M4 th d d h d M4 threaded head E32-TC200B4 Probe = 40 mm E32-TC200D 0.56 m (3.3 m) 15 cm (5.9 in) 1 mm ID fiber when e e exte ended ded Probe = 90 mm E32-TC200D4 M4 threaded head Probe = 40 mm E32-TC200F 2m 5cm (2 in) 0.5 mm ID fiber Probe = 90 mm M M3 3 tth hr rea ead de ed d h he ea ad d E32-TC200F4 Probe = 40 mm E32 E32 � THROUGH-BEAM TYPE, CONTINUED Side Beam Type Fiber Material Part Number Appearance Cable Length Sensing Minimum Remarks D Diis st ta anc nce e O Ob bje jec ct t Size Size Core Sheath E32-T14 2m 90 cm (3 ft) 0.1 mm PMMA PE 1 mm ID fiber (0.004 in) dia. Built-in lens offers long sensing distance 12 cm (4.7 in) 1 mm ID fiber E32-T14L 3mm dia. E32-T16 75 cm (29 in) ___ 1 mm ID fiber includes 0.5 mm and 1.0 mm slit masks E32-T16P 20 cm (8 in) ___ E32-T24 4.5 cm (1.8 in) 0.1 mm 0.5 mm ID fiber 1mm dia. (0.004 in) dia. 2mm dia. High Temperature Type Part Number Appearance Maximum Sensing g Minimum Fiber Material Remarks T Temperat ture D Diist tance O Ob bje j ct t Size Si Core Sheath E32-T51 150°C 15 cm (5.9 in) 1mm PMMA PE 1.5 mm ID fiber (302°F) (0.04 in) dia. M3 threaded head E32-T61 300°C 15 cm (5.9 in) 0.2 mm Glass SUS 304 1 mm ID fiber (572°F) 1.5 m (4.9 ft) (0.01 in) dia. with E39-F1 M4 threaded head lens Special Purpose Type Pa art Nu umbe ber Appearanc ea a ce e Cabl Cab e e Lengt e g h S Se ens sing g Minimu um Fiber Material Rem e a arks s D Diist tance O Ob bje j ct t Size Si Core Sheath E32-G14 2m 10 mm 0.5 mm PMMA PE 1 mm ID fiber (0.39 in) (0.02 in) dia. Ideal for mark sensing or belt alignment 10 mm E32-M21 15 cm (6 in) 0.3 mm 0.5 mm ID fiber (0.01 in) dia. Use with E3XA-CC4A for shape recognition M3 threaded head E32-T12F 60 cm (23.6 in) 0.9 mm Teflon 1 mm ID fiber (0.04 in) dia. Ideal for harsh chemical 5mmdia. environments E32-T22S 500 mm 0.5 mm PVC Ideal for sensing (0.02 in) dia. silicon wafers 3.0 mm dia. Ultra-narrow beam E32-T24S 350 mm Side-view 3.5 x 3 mm dia. Ideal for sensing silicon wafers Ultra-narrow beam E32-T84S 450-480 mm 0.3 mm Glass SUS Angled head ideal 304 for sensing silicon wafers E32 E32 � DIFFUSE TYPE General Purpose Fiber Material Pa art Nu umbe ber Appearanc ea a ce e Cabl Cab e e Lengt e g h S Se ens sing g Minimu um Rem e a arks s D Diist tance O Ob bje j ct t Size Si Core Sheath E32-CC200 2m 7.5 cm 0.03 mm PMMA PE 1 mm ID fiber (3 in) (0.001 in) dia. Concentric beam M6 threaded head x 20 mm (0.79 in) L E32-D11 4.5 cm 0.25 mm ID fiber (1.8 in) Ultra-flexible cable M6 threaded head x 17 mm (0.67 in) L E32-D11L 10 cm (4 in) 0.015 mm 1 mm ID fiber (0.0006 in) dia. Long distance M6 threaded head x 17 mm (0.67 in) L E32-D21 0.7 cm 0.03 mm 0.25 mm ID fiber (0.28 in) (0.001 in) dia. Ultra-flexible cable M3 threaded head x 11 mm (0.43 in) L E32-D21L 2.5cm (1in) 0.5 mm ID fiber M4 threaded head x 12 mm (0.47 in) L E32-D22L . 3 mm (0.12 in) dia. x 15 mm (0.59 in) L E32-D32 2 cm (0.79 in) 0.25 mm ID fiber Concentric beam 2mm dia. E32-D32L 4 cm (1.57 in) 0.04 mm Long distance (0.002 in) dia. Concentric beam 3mm dia. E32-DC50 0.5m (19in) 7.5 5c cm ( (3i 3 n) ) 0. 0 0 015 5 mm 1 mm ID fib ber e ( (0. 0 0 0006 006 iin) ) d diia. L Low costt, generall E32-DC200 2 m (6.4 ft) purpos ur ose e E32-DC500 M6 threaded head x 5 m (16.4 ft) 1 12 2 m mm m (0.47 (0 47 iin n) ) L L E32-DC1000 10 m (32.8 ft) E32-DC200C 0.64 m 7.5cm (3in) 0.03 mm 1 mm ID fiber 2.49 m when (0.001 in) dia. extended M6 threaded head x 17 mm (0.67 in) L E32-DC200E 2m 1.8 cm 0.5 mm ID fiber (0.71 in) M3 threaded head x 11 mm (0.43 in) L Armored Type Pa art Nu umbe ber Appearanc ea a ce e Cabl Cab e e Lengt e g h S Se ens sing g Minimu um Fiber Material Rem e a arks s D Diist tance O Ob bje j ct t Size Si Core Sheath E32-UDAT1-3F 0.91 m (3 ft) 8 cm (3.1 in) 0.03 mm Glass Stainless General purpose ( (0 0.0 001 01 iin n) ) d diia a. s ste tee ell C Ca an n w wiitth hs sta tan nd d 5/16 -- 24 thread x E32-UDAT1-6F 1.83 m (6 ft) 6.5 cm temperatures to 150°C 38.1 mm (1.5 in) L (2.6 in) (302°F) 0.05 mm. General purpose E32-UDBT1-3F* 0.91 m (3 ft) 9 cm (3.5 in) ( (0 0.0 .00 02 2 in in) ) d dia ia Can Can w wiit th hs st ta and nd 5 5/16 /16 - -- - 2 24 4 tthread hread x x temperatures to 200°C 38.1 mm (1.5 in) L E32-UDBT1-6F* 1.83 m (6 ft) 8 cm (3.1 in) °F) (392 *For use with E3JU-X only E32 E32 � DIFFUSE TYPE, CONTINUED Probe Type Fiber Material Pa art Nu umbe ber Appearanc ea a ce e Cabl Cab e e Lengt e g h S Se ens sing g Minimu um Rem e a arks s D Diist tance O Ob bje j ct t Size Si Core Sheath E32-D33 2m 5mm (0.2in) 0.015 mm PMMA PE 0.25 mm ID fiber (0.0006 in) dia. Ultra small sensing 3mmdia. 0.8 mm dia. 7.5cm (3in) 0.03 mm 1 mm ID fiber E32-DC200B ( (0 0.0 00 01 in) ) d dia a. Probe = 90 mm M M6 6 threaded threaded h head ead E32-DC200B4 Probe = 40 mm E32-DC200D 0.64 m 2.2 cm 1 mm ID fiber (2. (2.4 49 9 w wh hen en (0. (0.8 87 7 iin n) ) Probe = 90 mm exttended) d d) M6 threaded head E32-DC200D4 Probe = 40 mm 2m 1.8 cm E32-DC200F 0.5 mm ID fiber (0. (0.7 71 1 iin n) ) Probe = 90 mm M3 threaded head E32-DC200F4 Probe = 40 mm E32-DC9G No cable 3cm (1.2in) N/A 1 mm ID fiber Probe = 90 mm E32-DC9G4 1.2 mm dia. Probe = 40 mm Side Beam Type Pa art Nu umbe ber Appearanc ea a ce e Cabl Cab e e Lengt e g h S Se ens sing g Minimu um Fiber Material Rem e a arks s D Diist tance O Ob bje j ct t Size Si Core Sheath E32-D14L 2m 4cm (1.6in) 0.03 mm PMMA PE 1 mm ID fiber 6mmdia. (0.001 in) dia. 0.5 mm ID fiber E32-D24 1.5 cm (0.6 in) 2mmdia. 3mmdia. High Temperature Type Part Number Appearance Maximum Sensing g Minimum Fiber Material Remarks T Temperat ture D Diist tance O Ob bje j ct t Size Si Core Sheath 0.03 mm E32-D51 150°C 6cm (2.4in) PMMA PE 1.5 mm ID fiber (302°F) (0.001 in) dia. M6 threaded head E32-D61 300°C 4.5 cm (1.8 in) Glass SUS 304 1.4 mm ID fiber (572°F) M6 threaded head E32-D73 400°C 3cm (1.2in) 1 mm ID fiber (752°F) 1.25 mm dia. M4 threaded head E32 E32 Convergent Type and Special Purpose Pa art Nu umbe ber Appearanc ea a ce e Cabl Cab e e Lengt e g h S Se ens sing g Minimu um Fiber Material Rem e a arks s D Diist tance O Ob bje j ct t Size Si Core Sheath E32-D12F 2m 5cm (2 in) 0.03 mm PMMA Teflon 1 mm ID fiber (0.01 in) dia. Ideal for harsh 6-mm dia. chemical environ- ments 4 ±2mm 0.15 mm PE Side view E32-L24L (0.16 ±0.07 (0.006 in) dia. Convergent beam in) Ideal for sensing silicon wafers E32-L25 3.3 mm 0.25 mm Convergent beam (0. ( 13 in) ) (0. ( 01 in) ) dia. Ideal for sensing g silico ili n waffers E32-L25A E32-L25L 7.2 ±1.8 mm 0.15 mm (0.28 ±0.07 (0.006 in) dia. in) � RETROREFLECTIVE TYPE Special Purpose Part Number Appearance Cable Sensing g Minimum Fiber Material Remarks L Lengtth h D Diist tance O Ob bje j ct t Size Si Core Sheath E32-R16 2m 15 to 150 cm 0.03 mm PMMA PE For detection of (5.91 to 59.05 (0.001 in) dia. shiny transparent or in) with E39-R1 opaque objects Reflector E39-R1 reflector E39-R1 included E32-R21 1to25 cm For detection of (0.39to9.84in) shiny transparent or with E39-R3 opaque objects M6 threaded Reflector head E39-R3 reflector E39-R3 included E32 E32 Specifications � FIBER UNIT Through-beam (Separate) Sensors Part Number Operating Ambient Operating Ambient Permissible Sheath Material Enclosure Rating Temperature Humidity Bending Radius E32-M21 --40°Cto70°C(--40°Fto 35% to 85% 25 mm min. Black polyethylene IEC IP67 1 158 58° °F F) ) wiitth h no icin i i g E32-T11 4mm min. Vinyl chloride E32-T11L 25 mm min. Black polyethylene E32-T12F --30°Cto70°C(--22°Fto 40 mm min. Teflon-covered 158°F) with no icing black polyethylene E32-T12L --40°Cto70°C(--40°Fto 25 mm min. Black polyethylene 1 158 58° °F F) ) wiitth h no icin i i g E32-T14 E32-T14L E32-T16 E32-T16P 10 mm min. Vinyl chloride IEC IP50 E32-T17L 25 mm min. Black polyethylene IEC IP67 E32-T21 4mm min. Vinyl chloride E32-T21L 25 mm min. Black polyethylene E32-T22 E32-T22L E32-T24 E32-T51 --40°C to 150°C* (--40°Fto 35 mm min. Fluoride resin 302°F) with no icing E32-T61 --40°C to 300°C(--40°Fto 25 mm min. SUS 572°F) with no icing E32-TC200 --40°Cto70°C(--40°Fto Black polyethylene 1 158 58° °F F) ) wiitth h no icin i i g E32-TC200A E32-TC200B E32-TC200B4 E32-TC200C E32-TC200D E32-TC200D4 E32-TC200E E32-TC200F E32-TC200F4 *When used continuously between --40°C and 130°C(--40°F and 266°F) E32 E32 Reflective Sensors Part Number Differential Travel Operating Operating Permissible Material Enclosure Rating Ambient Ambient Bending Radius Temperature Humidity E32-CC200 20% of max. --40°Cto70°C 35% to 85% 25 mm min. Black polyethylene IEC IP67 d det etec ecttiion on s sens ensiin ng g ( (--40 40° °F F t to o 1 158 58° °F) F) E32-D11 4mm min. Vinyl chloride di dis sttanc ance e ( (A Ad djju us stt- w wiith th n no o icin icing g able in a range of E32-D11L 25 mm min. Black polyethylene 0 0% % tto o 2 20 0% % w wh he en n E32-D12F --30°Cto70°C 40 mm min. Teflon-covered black the E3X-H11 is (--22°F to 158°F) polyethylene* used.) with no icing E32-D14L --40°Cto70°C 25 mm min. Black polyethylene ( (--40 40° °F F t to o 1 158 58° °F) F) E32-D21 4mm min. Vinyl chloride w wiith th n no o icin icing g E32-D21L 25 mm min. Black polyethylene E32-D22L E32-D24 E32-D32 E32-D32L E32-D33 E32-D51 --40°C to 150°C 35 mm min. Fluoride resin (--40°F to 302°F) with no icing** --40°C to 300°C 25 mm min. SUS E32-D61 (--40°F to 572°F) with no icing E32-D73 --40°C to 400°C (--40°F to 752°F) with no icing E32-DC200 E32-DC200B E32-DC200B4 E32-DC200C E32-DC200D E32-DC200D4 E32-DC200E E32-DC200F E32-DC200F4 E32-DC9G --40°Cto70°C Black polyethylene E32-DC9G4 (--40°F to 158°F) with no icing E32-L24L*** --40°C to 105°C 10 mm min. Reinforced IEC IP50 (--40°F to 221°F) (average at 10% polyethylene with no icing decrease of sensing distance) *Teflon is a registered trademark of the Dupont Company and the Mitsui Dupont Chemical Company for their fluoride resin. **When used continuously between --40°C and 130°C(--40°F and 266°F) ***Beam size: 2 mm dia. E32 E32 Part Number Differential Travel Operating Operating Permissible Material Enclosure Rating Ambient Ambient Bending Radius Temperature Humidity E32-L25 20% of max. --40°Cto70°C 35% to 85% 25 mm min. Black polyethylene IEC IP50 d de ette ec cttiio on n s sens ensiin ng g ( (-- --4 40 0° °F F tto o 1 15 58 8° °F F) ) E32-L25A distance (Adjust- with no icing a abl ble e iin n a a r range ange of of E32-L25L*** --40°C to 105°C 10 mm min. Reinforced 0% to 20% when (--40°F to 221°F) (average at 10% polyethylene the E3X-H11 is with no icing decrease of used.) sensing distance) E32-R16 --25°Cto55°C 25 mm min. Black polyethylene IEC IP66 E39-R1 (--13°F to 131°F) with no icing E32-R21 --40°Cto70°C IEC IP67 E39-R3 (--40°F to 158°F) with no icing *Teflon is a registered trademark of the Dupont Company and the Mitsui Dupont Chemical Company for their fluoride resin **When used continuously between --40°C and 130°C(--40°F and 266°F) ***Beam size: 2 mm dia. Fine Through-beam Sensors Part Beam Size Differential Horizontal Operating Operating Permissible Material Enclosure Number Travel Positioning Ambient Ambient Bending Rating Accuracy Temperature Humidity Radius* 13 mm dia. --- --- --40°Cto70°C 35% to 85% 10 mm min. Reinforced IEC IP67 E32-T22S ( (a att a a d diis sttanc ance e ( (- -- -4 40 0° °F F t to o 1 158 58° °F F) ) lla am miin nat ate ed d E32-T24S of 200 mm) with no icing vinyl chloride E32-T84S --40°C to 200°C 25 mm min. SUS (--40°F to 392°F) with no icing *Average at 30% of sensing distance Slot Sensors Part Number Operating Ambient Operating Ambient Permissible Material Enclosure Rating Temperature Humidity Bending Radius E32-G14 --40°Cto 70°C(--40°Fto 35% to 85% 25 mm min. Black polyethylene IEC IP67 158°F) with no icing E32 E32 Engineering Data � EXCESS GAIN RATIO Through-beam Type E32-T22 E32-T21L, E32-T22L E32-T11L, E32-T12L 6 Sensing distance Sensing distance 5 W/E3X-A 4 3 E3X-A E3X-A 2 E3X-F E3X-FOperating level 1 Operating level Operating level E3X-VG E3X-VG 0 200 400 600 800 1000 Sensing distance (mm) Sensing distance (mm) Sensing distance (mm) E32-TC200E, E32-TC200F E32-T21 E32-TC50/200/500/1000, E32-TC200A, E32-TC200F4 E32-TC200B, E32-TC200B4 100 50 30 10 5 1 Operating level Operating level Operating level 0 20 40 60 80 100 120 Sensing distance (mm) Sensing distance (mm) Sensing distance (mm) E32-TC200 + E39-F1 E32-TC200 + E39-F2 E32-T11 100 50 30 10 5 1 Operating level Operating level Operating level 0 50 100 150 200 250 300 350 400 Sensing distance (m) Sensing distance (mm) Sensing distance (mm) Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio E32 E32 E32-UTAT1-3F E32-UTAT1-6F E32-T17L 100 6 Sensing distance 100 50 50 30 5 30 10 4 10 5 5 3 2 1 1 Operating level Operating level 1 0 50 100 150 200 250 300 350 01 5015202530 0 50 100 150 200 250 300 350 Sensing distance (mm) Sensing distance (mm) Sensing distance (m) E32-M21 E32-TC200B E32-T24 E32-TC200B4 E3X-A Operating level Operating level Sensing distance (mm) Sensing distance (mm) Sensing distance (mm) E32-T14L E32-T14 E32-T16 6 5 4 3 E3X-A 2 E3X-F 1 Operating level E3X-VG 0 50 100 200 250 300 Sensing distance (mm) Sensing distance (mm) Sensing distance (cm) Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio E32 E32 E32-T51 E32-T61 E32-T12F 6 Sensing distance 5 E3X-A 4 3 E3X-A 2 E3X-F Operating level Operating level 1 Operating level E3X-VG 0 40 80 120 160 200 Sensing distance (mm) Sensing distance (mm) Sensing distance (mm) Diffuse Type E32-D32, E32-DC9G E32-D21L, E32-D22L E32-D21 100 Sensing distance 50 30 Sensing object 10 5 E3X-A 1 Operating level E3X-F Operating level Operating level E3X-VG 0 246 8 10 12 14 16 Sensing distance (mm) Sensing distance (mm) Sensing distance (mm) E32-DC50, E32-DC200, E32-D11 E32-D11L E32-DC500, E32-DC1000 6 100 Sensing distance 50 30 5 Sensing object 10 4 5 3 1 2 E3X-A Operating level E3X-FOperating level 1 Operating level E3X-VG 0 10 20 30 40 50 60 70 0 40 80 120 160 200 Sensing distance (mm) Sensing distance (mm) Sensing distance (mm) Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio E32 E32 E32-UDAT1-3F E32-UDAT1-6F E32-D33 100 100 50 50 30 30 10 10 5 5 1 1 Operating level Operating level Operating level w/E3X-A 0 50 100 150 200 0 50 100 150 200 Sensing distance (mm) Sensing distance (mm) Sensing distance (mm) E32-D24 E32-D14L E32-D51 6 Sensing distance 5 4 3 E3X-A 2 Operating level E3X-FOperating level 1 E3X-VG 0 40 80 120 160 200 Sensing distance (mm) Sensing distance (mm) Sensing distance (mm) E32-D61 E32-D73 E32-D12F 6 Sensing distance 5 Sensing object 4 E3X-A 3 E3X-A 2 E3X-F Operating level Operating level 1 Operating level E3X-VG 0 40 80 120 160 200 Sensing distance (mm) Sensing distance (mm) Sensing distance (mm) Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio Excess gain ratio E32 E32 Convergent Type Retroreflective Type E32-R21 E32-R16 E32-L25, E32-L25A Operating level 0.1 01 2 3 4 Set distance (mm) Sensing distance (mm) Sensing distance (m) � OPERATING RANGE Through-beam Type Operating range with E3X-A11 amplifier E32-T11L + E39-F3 4 E3X-A 3 Y X 2 E3X-F 1 0 1 2 Set distance X (mm) 3 4 Note: With E3X-A: Adjust the angle of E39-F3 so that the sensor can detect an object at a distance of 90 mm. (For E3X-F: 50 mm). E32-T22, E32-T24 E32-T14 E32-T16 with E3X-A11 amplifier with E3X-A11 amplifier with E3X-A11 amplifier Excess gain ratio Operating position Y (mm) Operating position Y (mm) Operating position Y (mm) Excess gain ratio Operating position Y (mm) Excess gain ratio Setting range (mm) E32 E32 E32-T51, E32-T61 E32-M21 with E3X-A11 amplifier with E3X-A11 amplifier Diffuse Type E32-D21L, E32-D22L X Y E3X-VG E3X-A E3X-F Set distance X (mm) E32-D11L X E3X-A Y E3X-F E3X-VG Set distance X (mm) E32-DC200C Operating range with E3X-A11 amplifier 3.0 Parallel offset Y (0.118) E32-DC50 2.0 E32-DC200 (0.079) E32-DC200B E32-CC200 1.0 Detecting distance X (0.039) 0 1.0 (0.039) Detectable object 2.0 (0.079) 3.0 (0.118) 8 16 24 (0.316) (0.630) (0.945) Detecting distance X [mm (inch)] with 5 x 5 cm (2 x 2 in) 90% reflective mat paper Operating position Y (mm) Operating position Y (mm) Operating position Y (mm) Parallel offset Y [mm (inch)] Operating position Y (mm) Setting range (mm) E32 E32 E32-D12F 16 E3X-A X 12 Y E3X-VG 8 E3X-F 4 0 20 40 60 80 100 4 Set distance X (mm) 8 12 16 E32-UDAT1-3F with E3X-A amplifier E32-D24, E32-D32, E32-D33 20 15 E32-UDAT1-3F 10 5 Sensing distance X (mm) 0 120 30 60 90 5 E32-UDAT1-6F 10 52 20 Set distance X (mm) E32-D14L X E3X-AY E3X-F E3X-VG Set distance X (mm) E32-D51, E32-D61, E32-D73 E32-D51 Operating position Y (mm) Operating position Y (mm) Operating position Y (mm) Operating position Y (mm) Operating position Y (mm) E32 E32 Convergent Type Retroreflective Type E32-L25, E32-L25A E32-R21 with E3X-A11 amplifier Set distance (mm) Sensing distance (mm) Dimensions Unit: mm (inch) � THROUGH-BEAM TYPE (Sold in pairs) General Purpose E32-T11 Sensing head (nickel-plated Sixteen, Two hexagon clamping nuts brass) 0.265 M4 x 0.7 Two toothed washers (0.01) dia. Optical fiber, 2.2 (0.086) dia. Protective tube M2.6 x 0.45 2.4 3.2 3.3 15 2 m (6.56 ft.) 14 7 (0.28) (0.55) E32-T11L Two hexagon clamping nuts (T = 2.4) 1.4 Two toothed washers (for M4) M2.6 x (0.06) dia. 0.45 Sensing head Optical fiber, 2.2 (0.086) dia. (nickel-plated brass) M4x0.7 3 11 3.2 (0.12) 2 m (6.56 ft.) 7 14 (0.28) (0.55) E32-T12L 2.4 dia. 1.4 Sensing head dia. (0.09) Optical fiber, 2.2 (0.086) dia. (nickel-plated brass) 3 dia. 3 11 2 m (6.56 ft.) 14 (0.55) Operating position Y (mm) Set range (mm) E32 E32 E32-T17L Sensing head (ABS) M14 x 1 Two hexagon clamping nuts 10-mm dia. Optical fiber, lens (PMMA) 2.2 (0.086) dia. 5 19 (0.75) 23 42 10 m (32.8 ft.) E32-T21 Fiber attachment Sensing head (nickel-plated brass) M3 x 0.5 (E39-F9) Two hexagon clamping nuts Four, 0.25 25 (0.99) Two toothed washers (0.01) dia. 10 Protective tube Optical fiber, 1 dia. 15 2.5 1.8 11 2 m (6.56 ft.) 5.5 (0.43) (0.22) E32-T21L Two hexagon clamping nuts Fiber attachment Two toothed washers (E39-F9) Sensing head M3 x 0.5 0.9 25 (0.99) (nickel-plated brass) (0.04) dia. 10 Optical fiber, 1 dia. 1.7 2.5 1.8 (0.07) 11 2 m (6.56 ft.) 5.5 (0.04) (0.22) E32-T22 Fiber attachment Heat-shrinkable tubing (E39-F9) 25 (0.99) Sensing head Optical fiber, 0.5 dia. 1.4 dia. SUS303 1dia. 10 17 12 2 22 (0.86) 2 m (6.56 ft.) (0.08) dia. E32-T22L Fiber attachment (E39-F9) Sensing head, 2 dia. (stainless) 25 (0.99) Heat-shrinkable tubing 1.8 0.9 dia. (0.07) dia. Optical fiber, 1.0 dia. 10 2 (0.07) 17 12 22 2 m (6.56 ft.) (0.86) E32 E32 E32-TC50, E32-TC200, E32-TC500, E32-TC1000 Two hexagon clamping nuts 1.0 Two toothed washers (0.04) dia. M2.6 x 0.45 Sensing head M4 x 0.7 (nickel-plated brass) 2.4 Optical fiber, 2.2 dia. 3 3.2 14 * 2 m (6.56 ft.) 7 (0.55) (0.28) * This length is 50 cm for E32-TC50, 5 m for E32-TC500 and 10 m for E32-TC10000. E32-TC200A Two hexagon clamping nuts 1.0 (0.04) dia. Two toothed washers 2.6 dia. Sensing head M3 x 0.5 (nickel-plated brass) 3dia. Optical fiber, 2.2 dia. 1.8 5.5 7 2 m (6.56 ft.) 1.5 (0.22) 14 (0.28) (0.55) E32-TC200C Two hexagon clamping nuts 75 (3.0) 1.0 Two toothed washers Sensing head (0.04) dia. M2.6 x 0.45 M4x0.7 (nickel- plated brass) 22 (0.87) dia. Optical fiber, 7 2.4 2.2 dia. (0.28) 3 11 90 2 m (6.56 ft.) 400 (0.12) (15.8) (0.43) (3.54) when straight E32-TC200E Two hexagon clamping nuts Two toothed washers Fiber attachment (E39-F9) 0.5 Sensing head M3 x 0.5 25 (0.99) (0.02) dia. (nickel-plated brass) 10 Optical fiber, 1 dia. 2.5 1.8 (0.10) 11 2 m (6.56 ft.) (0.43) 5.5 (0.22) Armored Type E32-UTAT1-3F E32-UTAT1-6F Ø8.0 (0.315) (5/16 -- 24) thread 5.1 (0.2) Ø5.0 (0.197) (ABS) (Stainless Steel) (Stainless Steel) (Stainless Steel) 12.7 (0.5) Ø2.2 (0.087) 4.0 (0.157) 4.0 (0.157) 38.1 (1.5) 5.0 (0.197) Ø1.27 (0.05) 17.0 (0.669) 15.0 (0.59) 50.8 (2) (Fiber Bundle) A B L Note: Distance A can withstand 150°C (302°F); Distance B can withstand 70°C (158°F); L=3ft. or 6ft. E32 E32 E32-UTBT1-3F Ø7.1 (0.281) E32-UTBT1-6F (5/16 -- 24) thread 5.9 (0.234) Ø4.7 (0.187) (Stainless Steel) (Brass) (Stainless Steel) 12.7 (0.5) 12.7 (0.5) 15.2 (0.6) 0.9 (0.035) Ø3.2 (0.125) (Fiber Bundle) 38.1 (1.5) 25.4 (1.0) A B L Note: Distance A can withstand 200°C (392°F); Distance B can withstand 70°C (158°F); L=3ft. or 6ft. Probe Type E32-T33-1 Fiber attachment (E39-F9) 25 Sensing head Heat-shrinkable (0.98) (SUS303) Optical fiber, Two, 0.25 0.8 3 (0.12) dia. tubing two, 1 (0.04) dia. (0.01) dia. (0.03) dia. 10 15 15 12 35 (1.38) 2 m (6.56 ft.) E32-TC200B E32-TC200B4 Two hexagon clamping nuts 1.0 Two toothed washers (0.04) dia. Stainless tube Sensing head M4 x 0.7 (nickel-plated brass) (SUS304) 1.2 dia. max. Optical fiber, 2.2 (0.086) dia. 2.4 3.2 11 90 (3.5) 2 m (6.56 ft.) 7 [40 (1.57)] (0.28) (see note) Note: The values in the brackets are for the E32-TC200B4. E32-TC200D E32-TC200D4 Two hexagon clamping nuts Two toothed washers 75 Stainless tube Sensing head M4 x 1.0 dia. 1.2 (SUS304) 0.7 (nickel-plated dia. brass) 22 max. (0.87) dia. Optical fiber, 2.4 3.2 2.2 dia. 7 11 90 400 2m (6.56ft.) (3.53) (15.8) 90 (3.5) when straight [40 (1.57)] See note Note: The values in the brackets are for the E32-TC200D4. E32 E32 E32-TC200F E32-TC200F4 Two hexagon clamping nuts Fiber attachment Two toothed washers (E39-F9) Stainless tube 0.5 (SUS304) Sensing head M3 x 0.5 25 (0.99) (0.02) dia. (nickel-plated brass) 0.9 dia. 10 Optical fiber, 1 dia. min. 2.5 1.8 (0.10) 90 11 2 m (6.56 ft.) 5.5 (3.5) (0.43) (0.22) [40 (1.57)] (See note) Note: The values in the brackets are for the E32-TC200F4. Side Beam Type E32-T14 Heat resistive ABS Lens unit 8.2 (PMMA) 4.4 dia. 7 (0.28) Optical fiber, Optical axis R3.5 Two, 3.2 dia. 2.2 (0.086) dia. 8 7 10.5 100.2 2.5 9.2 11.2 16 2m (0.63) (6.56 ft.) E32-T14L Sensing head, 3 dia. Heat-shrinking tubing (stainless) Optical fiber, 2.2 (0.086) dia. 45° 2.8 1.5 11.5 3 (0.12) dia. 30 (1.18) 12 2 m (6.56 ft.) 35 (1.38) Sensing surface E32 E32 E32-T16 20 (0.79) Two, R2 0.5-mm (0.02) Wide Slit Seal 10.2 4 3.2 (Sold in Pairs) 6 Mounting Holes (0.23) 2 4 (0.79) 0.5 20 4 Sensing Two, (R) 1.2 Two, (R) 11 15.5 head (0.43) 15 4.5 (0.61) (ABS) 23 Two, M3 8.4 2.3 (0.90) 8.85 3 5.5 3.2 Black 25 20 27 1-mm (0.04) Wide Slit Seal (1.06) (Sold in Pairs) 6 Lens 1 58 (2 x 10) 6dia. 4 43.2 Two, 3.2 (0.16) dia. 23 2m (0.90) (6.56 ft.) Mounting bracket 15 E39-L4 Black Fiber 33 (1.30) 2.2 (0.08) dia. E32-T16P E32-T16P + E39-L94 Mounting Two, 3.2 dia., 0.5-mm (0.02) wide Seal Slit 6 dia counter 4 sinking (Two slits are provided) 14.5 (0.15) (0.57) 3.4 35 (0.13) 10.7 (1.38) 20 (0.79) 2 0.5 (0.02) 4 4.8 13.4 19 Two, M3 27 (0.75) (1.06) 20 20 4 (0.79) Sensing (0.79) 26.4 head (1.04) (2 x 11) (PMMA) 4 Black 12.2 (0.48) 3.2 (0.13) Sensing head (heat-resistive ABS) 1-mm (0.04) wide Seal Slit (Two slits are provided) Sensing head 19 3.4 (0.75) 2m (0.13) (6.56 ft.) 52 (2.04) 1 4 2.2 (0.09) dia. 43.2 optical fiber (1.7) 13.4 23.2 26.4 (0.91) E39-L94 Mounting Bracket (1.04) 2.2-dia. (sold separately) fiber Black E32 E32 E32-T24 Fiber attachment Sensing head 1 (0.04) dia. (E39-F9) SUS304 2 (0.07) dia. 25 (0.99) Protective tube 10 1.4 dia. Optical fiber, 1 dia. 45° (0.39) 1 0.5 1.5 15 15 (0.59) 12 2 m (6.56 ft.) 35 (1.38) High Temperature Type E32-T51 Two hexagon clamping nuts 1.5 Two toothed washers (0.06) dia. Sensing head M4 x 0.7 (nickel-plated brass) 2.85 dia. 2.4 Optical fiber, 2.2 dia. 7 (0.28) 15 1 17 2 m (6.56 ft.) (0.67) Note: Resistant temperature is 150°C (302°F). Resistant temperature is 130°C (266°F) when used continuously. E32-T61 Two hexagon clamping nuts SUS flexible tube Two toothed washers 1.0 Hexagon clamping screw (0.04) dia. Sensing head M4 x 0.7 M2.6 x 0.45 2.8 dia. 4 dia. 5 dia. Sleeve (SUS303) (See note) 4dia. 72 3.4 13 (0.51) 5 (0.28) 10 2 m (6.56 ft.) 28 (1.10) 20 (0.79) A B Note: Section A resists 300°C and section B (which is inserted to the amplifier) resists 110°C. The operating temperature of section B must also be within the withstand temperature range of the amplifier. Special Purpose E32-G14 Sensing head (ABS) 36.3 (1.43) 22 (6.56 ft.) 25.2 (0.99) 20 (0.79) 9.2 R1.6 R1.6 Mounting Holes Two, M3 Lens R3.5 (PMMA) 10 Optical axis 24 3.2 9.0 (0.35) (0.95) 9.4 (0.37) Optical fiber 4 1.6 1.6 2.2 (0.86) dia. 9.4 23.5 (0.92) (0.37) 7.4 7.0 (0.29) E32 E32 E32-M21 Two hexagon clamping nuts Sensing head Two toothed washers M3 x 0.35 Plastic fibers, four, 1 (0.04) dia. Silicone tube (SUS303) Sleeve 13 28 (1.10) 1.8 11 2 m (6.56 ft.) 23 (0.90) Note: One set of silicone tubes is black while the other set is gray for easy identification when they are connected to the light source and receiver. E32-T12F 4-mm (0.16) Optical fiber, dia. lens Sensing head, 5 dia. 4dia. 2.2 (0.086) dia. Fluoride resin 20 100 2 m (6.56 ft.) (3.93) E32-T22S Sensing head Optical fiber, 1.7 dia. (nickel-plated brass) 2.2 (0.086) dia. 3 (0.12) dia. 15 2 m (6.56 ft.) (0.59) E32-T24S 0.4 (0.02) 1.8 (0.07) Sensing head 3.5 dia. Optical fiber, (nickel-plated brass) 2.2 (0.086) dia. 17.6 11 3.2 (0.69) (0.43) Mounting bracket (attachment) 3.2 3 10 2 m (6.56 ft.) 20.5 (0.81) 2 (0.08) dia. Sensing surface 2 (0.08) E32 E32 E32-T84S A B 20 2.000 13 14.2 12 (0.79) (0.47) 15 (0.51) (0.56) (78.74) (0.59) 2.2 mm dia. 3 φ 2.9 mm R8 φ φ 4 φ 5 4 (0.12) SUS 304 90° 3.5 φ (0.14) φ 3 � DIFFUSE TYPE General Purpose E32-CC200 Sixteen, 0.25 Two hexagon clamping nuts 1.0 dia. for light (0.01) dia. for emission Two toothed washers light reception Optical fiber, Sensing head M6 x 0.75 2.5 dia. two, 2.2 dia. (nickel-plated brass) 3 5.2 2.4 2 m (6.56 ft.) 23 10 (0.90) E32-D11 Sixteen, Sensing head Two hexagon clamping nuts 0.265 (SUS303) Two toothed washers (10 teeth) dia.(0.01) Optical fiber, two, M6 X 0.75 Protective tube 2.2 dia. 5.2 2.4 15 10 17 2 m (6.56 ft.) (0.39) (0.67) E32-D11L Two hexagon clamping nuts Two toothed washers Two, 1.4 dia. Sensing head (nickel-plated brass) M6 x 0.75 4dia. Two optical fiber,2.2 dia. 5.2 2.4 3 10 20 2 m (6.56 ft.) (0.39) (0.79) E32-D21 Sensing head Fiber attachment (nickel-plated (E39-F9) brass) M3 x 0.5 25 (0.98) Two hexagon clamping nuts Four, 0.25 10 Two toothed washers (0.01) dia. (0.39) Optical fiber, two, 1 dia. Protective tube 2.5 1.8 15 11 2 m (6.56 ft.) 5.5 (0.43) E32 E32 E32-D21L Two fiber attachments (E39-F9) Two hexagon clamping nuts Two toothed washers 25 (0.98) Two, 0.9 10 Sensing head M4 x 0.75 (0.04) dia. (nickel-plated brass) (0.39) Optical fiber, two, 1.0 dia. 3 2.4 3.2 7 15 2 m (6.56 ft.) (0.28) (0.59) E32-D22L Two fiber attachments (E39-F9) 25 (0.98) 10 Two, Sensing head 3 dia. (0.39) 2.7 dia. 0.9 dia. Optical fiber, two, 1 dia. (nickel-plated brass) 3 15 2 m (6.56 ft.) (0.59) E32-D32 Two fiber attachments (E39-F9) 25 (0.98) Sensing Light source 10 head fiber 0.5 dia. 2 (0.08) Optical fibers, Heat-shrinkable (0.39) SUS303 3 (0.12) dia. two, 1 (0.04) dia. tubing dia. 15 (0.59) 2 12 Receive fiber 22 (0.87) 2 m (6.56 ft.) (0.25 dia.) x 4 E32-D32L 2 m (6.56 ft.) standard length 15 (0.59) Light source 15 (0.59) 400 (15.75) 1,570 (61.81) (1 dia.) Receive (0.265 dia.) x 16 Sensing head, Optical 3 dia (0.12). Branching box, fibers, two, (stainless) 6 dia. (heat-resistive 2.2 (0.09) dia. ABS black resin) E32-DC50, E32-DC200, E32-DC500, E32-DC1000 Part number L Two hexagon clamping nuts Two, 4 Two toothed washers 1.0 dia. E32-DC50 50 cm (19 in) (0.16) dia. Sensing head M6 x 0.75 (ADC) E32-DC200 2 m (6.56 ft.) E32-DC500 5 m (16.3 ft.) Optical fiber,2.2 dia. E32-DC1000 10 m (32.8 ft.) 3 4.8 2.4 17 10 L (0.67) (0.39) E32 E32 E32-DC200C 150 (5.90) Two hexagon clamping nuts Two toothed washers Two, 1.0 dia. Sensing head (nickel-plated brass) M6 x 0.75 22 dia. (0.87) Optical fiber, 2.2 5.2 x 2 dia. 2.4 10 2 m (6.56 ft.) 17 (0.67) 90 (3.54) 400 (15.8) (0.39) when straight E32-DC200E Two fiber attachments (E39-F9) Two hexagon clamping nuts 25 (0.98) Two toothed washers 10 Sensing head M3 x 0.5 (SUS304) (0.39) Two, 0.5 dia. Optical fiber, two, 1 dia. 2.5 1.8 (0.10) 11 2 m (6.56 ft.) 5.5 (0.43) (0.22) Armored Type E32-UDAT1-3F E32-UDAT1-6F (ABS) (Stainless Steel) Ø8.0 (0.315) (5/16 -- 24) thread 5.1 (0.2) (Epoxy-filled PVC) 12.7 (0.5) (Stainless Steel) (Stainless Steel) Ø5.0 (0.197) Ø2.2 (0.087) 4.0 (0.157) Ø1.7 (0.066) 4.0 (0.157) (Fiber Bundle) 5.0 (0.197) 17.0 (0.669) 15.0 (0.59) 38.1 (1.5) 38.1 (1.5) 50.8 (2.0) 190.5 (7.5) A B L Note: Distance A can withstand 150°C (302°F); Distance B can withstand 70°C (158°F); L=3ft. or 6ft. E32--UDBT1--3F E32--UDBT1--6F (5/16 -- 24) thread 5.9 (0.234) (Stainless Steel) Ø7.1 (0.281) (PVC) 12.7 (0.5) (Brass) (Stainless Steel) Ø4.7 (0.187) 12.7 (0.5) 15.2 (0.6) Ø3.2 (0.125) 0.9 (0.035) (Fiber Bundle) 25.4 (1.0) 152.4 (6.0) 38.1 (1.5) 38.1 (1.5) A B L Note: Distance A can withstand 200°C (392°F); Distance B can withstand 70°C (158°F); L=3ft. or 6ft. E32 E32 Probe Type E32-D33 Fiber attachment (E39-F9) 25 (0.98) Sensing head 0.8 Optical fiber, two, 10 Two, 0.25 (SUS303) Heat-shrinkable (0.03) 3 (0.12) 1 (0.04) dia. (0.39) tubing (0.01) dia. dia. dia. 12 (0.47) 15 (0.59) 15 (0.59) 2 m (6.56 ft.) 35 (1.38) E32-DC200B E32-DC200B4 Two hexagon clamping nuts Stainless Two toothed washers Two, 1.0 dia. tube Sensing head M6 x 0.75 (fine screw) 2.5 dia. (SUS304) max. Optical fiber,2.2 dia. 5.2 2.4 17 10 2 m (6.56 ft.) 90 (3.54) (0.67) (0.39) [40 (1.57)] See note Note: The values in the brackets are for the E32-DC200B4. E32-DC200D E32-DC200D4 Two hexagon clamping nuts 150 (5.90) Two, 1.0 Two toothed washers Stainless (0.04) dia. Sensing head M6 tube 2.5 dia. x 0.75 (SUS304) (SUS304) max. 22 dia. (0.87) Optical fiber, 2.4 5.2 two, 2.2 dia. 400 17 90 10 2 m (6.56 ft.) (15.8) (0.67) (3.54) (0.39) 90 (3.54) when straight [40 (1.57)] See note Note: The value in the brackets is for the E32-DC200D4. E32-DC200F E32-DC200F4 Fiber attachment Two hexagon clamping nuts (E39-F9) Two toothed washers 25 (0.98) Sensing head M3 x 0.5 Stainless tube Two, 0.5 (SUS304) 10 (SUS304) (0.02) dia. (0.39) Optical fiber, two, 1 dia. 1.2 dia. min. 2.5 1.8 2 m (6.56 ft.) 11 90 (3.5) 5.5 (0.43) [40 (1.57)] (0.22) See note. Note: The values in the brackets are for the E32-TC200F4. E32 E32 E32-DC9G E32-DC9G4 Sleeve 1.2 (0.05) 4 (0.16) Stainless tube dia. max. 15 (0.59) 8 Do not bend the stainless tube in this range. 10 7.5 6 (0.39) 13 (0.24) 90 (3.54) 17 (0.51) [40 (1.57)] (0.67) See note Note: The values in the brackets are for the E32-DC9G4. Side Beam Type E32-D14L Optical fiber, two, 2.2 Sensing head (0.09) dia. (stainless) Heat-shrinkable tubing 45° 5.7 1.5 6 (0.24) 2 1 dia. 30 (1.18) 12 (0.47) 35 (1.38) 2 m (6.56 ft.) Light baffle Sensing surface E32-D24 Two fiber attachments (E39-F9) Sensing 25 (0.98) head 3 (0.12) Optical fibers, two, 10 (SUS304) Heat-shrinkable (0.39) dia. 1 (0.04) dia. tubing 2 (0.08) dia. 45° 1 0.5 1.5 12 15 (0.59) 15 (0.59) (0.47) 2 m (6.56 ft.) 35 (1.38) Light baffle Sensing surface High Temperature Type E32-D51 Two hexagon clamping nuts Optical fiber, 2.2 Two toothed washers Two, 1.5 dia. (0.09) d ia. Sensing head,M6 x 0.75* 4.9 3.1 2.4 10 3 13 (0.51) (0.39) 17 2 m (6.56 ft.) (0.67) *nickel-plated brass Note: Resistant temperature is 150 C (302 F). Resistant temperature is 130 C (266 F) when used ° ° ° ° continuously. E32 E32 E32-D61 Two hexagon clamping nuts Two toothed washers SUS flexible tube SUS304 1.4 Sensing head (SUS303) Sleeve (0.06) dia. M3 x 0.75 M4 x 0.7 Hexagon clamping screw 5dia. 3.5 dia. 8 15 (0.59) 10 5 6.5 See note 3 3 6.4 22.4 (0.39) 13 5 2 m (6.56 ft.) 16.5 (0.65) (0.25) 20 (0.79) B A Note: Section A resists 300°C (572°F) and section B (which is inserted to the amplifier) resists 110°C (230°F). The operating temperature of section B must also be within the withstand temperature range of the amplifier. E32-D73 Two hexagon clamping nuts SUS303 Two toothed washers Sleeve Sensing head 1.0 Hexagon SUS flexible tube 1.25 dia. 2.5 dia. M4 x 0.7 (SUS303) (0.04) dia. 5dia. clamping 4 dia. 2.8 dia. 1.65 dia. screw 8 15 (0.59) 7 See note 55 6.4 2.4 5 6.5 (0.25) 16.5 (0.65) 13 (0.51) 60 (2.36) 20 (0.79) 10 2 m (6.56 ft.) A C B Note: Section A resists 400°C (752°F), section B resists 300°C (572°F) and section C (which is inserted to the amplifier) resists 110°C (230°F). The operating temperature of section C must also be within the withstand temperature range of the amplifier. Convergent Type and Special Purpose E32-D12F Sensing head, Optical fiber, two, 6 (0.24) dia. Fluoride resin 5 (0.20) dia. 2.2 (0.09) dia. 16 2 m (6.56 ft.) 100 (3.94) E32-L24L 4 (0.16) 3.6 (0.14) 18 (0.71) Side view prism (PC) 3.3 1.5 Two fiber attachment 3.3 4 (E39-F9) Optical 6 25 20 axis (0.98) (0.79) Two, 1 dia. optical fibers 10 6.5 (0.26) (0.39) Sensing head (PC) Two, 3.2 dia, 6 dia. 2m (6.56 ft.) counter sinking E32 E32 E32-L25 20 (0.79) 5 4 10 (0.39) Note: The fiber for the light source is 4.8 6.5 identified by a white line. White line 20 Optical fiber, two, 2.2 dia. 6.5 (0.26) (0.79) 2 m (6.56 ft.) Two, 3.2 dia., Sensing head (ABS) 6 dia. spot facing E32-L25A 20 (0.79) 5 4 10 6.5 4.8 (0.26) 6.5 20 (0.26) (0.79) Sensing head (ABS) Two, 3.2 dia., 6 dia. spot facing 2m (6.56 ft.) White line Optical fiber, two, 2.2 dia. E32-L25L 18 (0.71) Two fiber attachment 4 (E39-F9) 25 6 (0.24) (0.98) 16 Two, 1 dia. optical fibers 10 (0.63) 6.5 (0.26) (0.39) Sensing head (PC) Two, 3.2 dia, 6 dia. 2m (6.56 ft.) counter sinking E32 E32 � RETROREFLECTIVE TYPE Special Prupose E32-R16 Nameplate 15 27 (1.06) (0.59) 7 (0.28) 13 (0.51) 10 1.5 (0.06) 3.2 (0.39) 1.5 3.2 (0.13) 16 7.2 6 4 15.2 8 (0.60) 21.5 (0.85) Optical fiber, 21 two, 2.2 (0.09) dia. (0.83) Standard length: 2 m 16±0.2 Lens (PMMA) Two, M3 screws 17 22.5 (attachment) 1 (0.67) (0.88) Mounting bracket (attachment) E32-R21 Two fiber attachments (E39-F9) Two hexagon clamping nuts 25 (0.98) Lens Two washers Sensing head Silicone tube 10 (PMMA) M6 x 0.75 Optical fibers, two, 1 dia. 5dia. 2.2 (0.09) 10 3 (0.39) 2.8 11 14 (0.11) 17.8 2 m (6.56 ft.) 27.8 (1.09) E32 E32 Installation � CUTTING FIBER � BENDING RADIUS Insert a fiber into the Fiber Cutter and determine the length of the E39-F11 Sleeve Bender fiber to be cut. The bending radius of the stainless tube should be as large as pos- Press down the Fiber Cutter in a single stroke to cut the fiber. sible. The smaller the bending radius becomes, the shorter the sensing distance will be. When the fiber is cut, an insertion mark is inscribed on the fiber. Insert the tip of the stainless sleeve to the Sleeve Bender and bend For a 2.2-mm dia. standard fiber only. the stainless sleeve slowly alongthe curve of the Sleeve Bender (re- fer to the figure). Insertion mark 12.6 1.2 dia. 1.2 dia. 1.3 dia. max. max. min. R10 2.2-dia. R 12.5 R5 R7.5 Insert a fiber into the Fiber Cutter in the direction indicated by the Fiber tip position mark arrow (refer to the following figure). 2 Stainless tube 1 The cutting holes cannot be used twice. If the same hole is used twice, the cutting face of the fiber will be rough and the sensing dis- o 10 90 max. tance will be reduced. Always use an unused hole. Use either one of the two holes on the right (refer to the following figure) to cut a thin fiber as follows: 10 1. An attachment is temporarily fitted to a thin fiber before Do not bend here. shipment. Temporarily fitted 2. Secure the attachment after adjusting the position of it in the direction indicated by the arrow. 3. Insert the fiber into the E39-F4 to cut. Cutter E39-F4 Two holes for thin fiber Three holes for standard fiber (2.2 mm dia.) Note: Insert the fiber in the direction indicated by the arrow. E32 E32 Stainless Steel Tube with a 90° Bend at the Base � FIBER UNITS WITH 90° BEND IN STAINLESS Length STEEL TUBE Applicable Models 2 R E32-TC200B/TC200F/DC200F Appearance Stainless Steel Tube with a 90° Bend at the Tip Bending radius(1) Length 1 R5.0 5.0 mm 10.0 mm R 1 R7.5 7.5 mm 17.5 mm R 10.0 10.0 mm 20.0 mm R 12.5 12.5 mm 22.5 mm Bending radius(1) 1 The length overall is 120 mm max. R5.0 10.0 mm 15.0 mm is required, use the E39-F11 Sleeve Bender. Note: If larger2 R7.5 12.5 mm 17.5 mm R 10.0 15.0 mm 20.0 mm R 12.5 17.5 mm 22.5 mm The length overall is 120 mm max. Note: If largeris required, use the E39-F11 Sleeve Bender. 1 Sensing Distance for Tubes with 90° Bends Bending Radius Part Number Amplifier Standard R5.0 R7.5 R10.0 R12.5 E32-TC200B E3X-H11 400 mm 260 mm 330 mm 360 mm 400 mm E3X-A180 mm 110 mm 140 mm 160 mm 180 mm E32-TC200F 3 C 00 E3X-H11 100 mm 55 mm 100 mm 100 mm 100 mm E3X-A50 mm 30 mm 50 mm 50 mm 50 mm E3 32-DC200F C 00 E3X-H11 36 mm 30 mm 36 mm 36 mm 36 mm E3X-A18 mm 10 mm 18 mm 18 mm 18 mm E32-T14/-G14 � FIBER UNIT WITH LONGER FIBER Applicable Models Seal E32-TC200/-DC200 E32-TC200B/-DC200B E32-TC200E/-DC200E E32-L25 (A) Wafer Sensor E32-TC200F/-DC200F Insert the fiber with a white line into the light projection side of the E32-TC200A Amplifier. Appearance The tightening force of the sensor head is 8 kgfcm (0.75 Nm). Avoid places where water could be sprayed onto the E32-L25(A). E32-T16 Slit Seal (Attachment) Peel the E32-T16 Slit Seal off the ground paper and affix the Slit Seal to the sensing face of the sensor so that the corners of the Slit The length can be ordered in increments of 1 m between 6 m min. and 20 m max.. (2-m and 5-m fiber length types are Seal fit in with the corners of the sensing face. To sense an object at standard for E32-TC200, E32-DC200.) a distance of 30 cm max., a 0.5-mm wide Slit Seal must be used. E32-T16 Sensing Head � HANDLING Attachment slit E32-D51/-T51 Heat-resisting Fiber The bending radius of the fibers should be 35 mm min. Connecting fibers via the E39-F10 Fiber Connector is not possible. The withstand temperature of the Heat-Resisting Fibers is 150°C max. In continuous operation, the ambient temperature should be 130°Cmax. E32-T14/-T51 If the sensor is ON because some object in front of the lenses re- flects light, attach the black seals (sold together) to the lenses. E32 E32 Mounting panel � ATTACHMENT UNITS Hexagon clamping nut Applications E39-F10 Fiber Connector Use the following procedure (refer to the figure) to connect fibers via Fiber Unit the Fiber Connector. Protective spiral Toothed washer tube Splice Use the attached saddle to secure the end cap of the Protective Spi- Retention Unit ral Tube. To secure the Protective Spiral Tube at a position other Retention Unit than the end cap, apply tape to the tube so that the portion becomes thicker in diameter. Each fiber should be as close as possible before they are con- Saddle nected. Tube Sensing distance will be reduced by approximately 25% when fibers are connected. Only fibers with 2.2 mm dia. can be connected. End cap Protective Spiral Tube Inserta fiber to the Protective Spiral Tube from the head connector side (screwed) of the tube. E39-F3A Reflective Unit Lens When the E39-F3A is attached to the fiber, the E3X can sense the light reflected from the interior of the E39-F3A. If this happens, ad- just the sensitivity of the E3X Amplifier with Sensitivity Adjustor. Fiber Unit Protective spiral Placea sensing object or white paper at the sensing distance set tube and adjust the insertion length of the Fiber Unit to the E39-F3A so that the light spot is as small as possible. Then fix the position of the Push the fiber into the Protective Spiral Tube. The tube should be Fiber Unit with the hexagonal wrench (attachment) straight so that the fiber is not twisted when inserted. Then turn the end cap of the spiral tube. Tighten Fiber Unit Protective spiral A Loosen tube Lens B Secure the Protective Spiral Tube on a suitable place with the at- Insertion tached nut. Fiber Unit (E32-D32) A: The focus is farther than the E39-F3A. B: The focus is closer than the E39-F3A NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4. Omron Europe B.V. EMA-ISD, tel:+31 23 5681390, fax:+31 23 5681397, http://www.eu.omron.com/ema Cat. No. CEDSAX2 3/97 Specifications subject to change without notice. Printed in U.S.A.