Mounting Brackets E39-L/F39-L Slits/Reflectors E39-S/E39-R CSM_E39-L_F39-L_E39-S_E39-R_DS_E_15_1 Mounting Brackets [Refer to Dimensions on page 5.] Accessories Applicable sensor Page Fitting Model Count (mounting pitch on materials Description Material Count Dimensions sensor side) Hexagonal bolts M4 × 12 E3S-RS30E4@ (25.4) Iron, zinc plating 1 Iron, zinc plating 2 E39-L2 (with spring and plain washers) E3S-R1E4@ (25.4) Slotted/Phillips screws M3 × 12 E39-L4 Iron, zinc plating 1 Iron, zinc plating 2 E32-T16 (20) (with spring and plain washers) Hexagonal bolts M4 × 12 E3S-RS30E4@ (25.4) E39-L6 Iron, zinc plating 1 Iron, zinc plating 2 5 (with spring and plain washers) E3S-R1E4@ (25.4) Slotted/Phillips screws, M3 × 12 E39-L31 Iron, zinc plating 1 Iron, zinc plating 2 E3C-S50 (8) (with spring washers) Phillips screws M4 × 25 Iron, zinc plating 2 (with spring and plain washers) E39-L40 Iron, zinc plating 1 E3JK Nuts M4 Iron, zinc plating 2 Phillips screws M3 × 14 Iron, zinc plating 4 Iron, zinc plating 2 (with spring washers) E39-L41 E3C-1 (10) Plain washer M3 Iron, zinc plating 4 E3C-2 (20) Phillips screws M3 × 10 Iron, zinc plating 4 Iron, E3C-DS10 (19) E39-L42 2 (with spring washers) black coating E3C-VS1G (19) Plain washer M3 Iron, zinc plating 4 E3C-VS3R (19) Stainless steel Slotted/Phillips screws M3 × 8 E3Z pre-wired model E39-L43 1 Stainless steel (SUS304) 2 (SUS304) (with spring and plain washers) (25.4) 6 Stainless steel Slotted/Phillips screws M3 × 8 E3Z pre-wired model 1 Stainless steel (SUS304) 2 E39-L44 (SUS304) (with spring and plain washers) (25.4) Slotted/Phillips screws M4 × 30 Iron, zinc plating 2 (with spring and plain washers) E39-L51 Iron, zinc plating 1 E3JM (40) Nuts M4 Iron, nickel plating 2 Iron, zinc plating 1 --- --- --- E39-L53 E3JM (40) Stainless steel E39-L54V 1 --- --- --- E32-T54V (SUS304) Stainless steel Slotted/Phillips screws M3 × 12 E3S-R1@ (20) E39-L69 1 Stainless steel (SUS304) 2 (SUS304) (with spring and plain washers) E3S-R3@ (20) Stainless steel Slotted/Phillips screws M3 × 12 E3S-R6@ (20) 1 Stainless steel (SUS304) 2 E39-L70 (SUS304) (with spring and plain washers) E3S-R8@ (20) E32-T24S E39-L83 Stainless steel 1 --- --- --- 6 E32-A03 Stainless steel Hexagonal bolts M4 × 12 E39-L85 1 Iron, zinc plating 2 E3S-C (25.4) (SUS304) (with spring and plain washers) Stainless steel Hexagonal bolts M4 × 12 E39-L86 1 Iron, zinc plating 2 E3S-C (25.4) (SUS304) (with spring and plain washers) Stainless steel Hexagonal bolts M4 × 12 E3S-C (25.4) E39-L87 1 Iron, zinc plating 2 (SUS304) (with spring and plain washers) E3S-CR62/67 (25.4) Note: Applicable models that appear shaded come with the Mounting Brackets at left as accessories. 1 E39-L/F39-L/E39-S/E39-R Accessories Applicable sensor Page Fitting Model Count (mounting pitch on materials Description Material Count Dimensions sensor side) Holder (upper) Heat-resistant ABS resin 1 Stainless steel E39-L93FH 1 Holder (lower) 66 nylon 1 (SUS304) Pipe Stainless steel (SUS304) 1 Bolts M4 × 12 with Hexagonal Iron, nickel plating 2 Stainless steel holes E39-L93FV 1 E3Z (25.4) (SUS304) Bolts M4 × 30 with hexagonal Iron, nickel plating 1 E3S-R1@/R3@ 8 holes /R6@/R8@ (20) Stainless steel E39-R1/E39-R3 E39-L93H 1 Phillips screws M3 × 12 Stainless steel (SUS304) 2 (SUS304) (with spring and plain washers) Spring washer M4 Iron, nickel plating 1 Stainless steel E39-L93V 1 Plain washer M4 Iron, nickel plating 1 (SUS304) Nuts M4 Iron, nickel plating 3 Holder 66 nylon 1 E3Z (25.4) Pipe Stainless steel (SUS304) 1 E3S-R1@/R3@ --- --- E39-L93XY /R6@/R8@ (20) Bolts M5 × 16 with hexagonal holes Stainless steel (SUS304) 2 E39-R1/E39-R3 Nuts M5 Stainless steel (SUS304) 2 Phillips screws M3 × 10 Iron, zinc plating 4 E39-L94 Iron, zinc plating 2 E32-T16P (19) Nuts M3 Iron, zinc plating 4 E39-L96 * For installation 9 Stainless steel Phillips screws M3 × 6 1 Iron, nickel plating 2 E39-R1 of Sensor (SUS304) (with spring and plain washers) Adjuster E39- L93 Stainless steel Slotted/Phillips screws M3 × 12 E39-L97 1 Stainless steel (SUS304) 2 E3S-R1@/R3@ (20) (SUS304) (with spring and plain washers) E3Z pre-wired model Stainless steel Slotted/Phillips screws M3 × 12 E39-L98 1 Stainless steel (SUS304) 2 (25.4) (SUS304) (with spring and plain washers) E3S-R6@/R8@ (20) Stainless steel Hexagonal bolts M4 × 12 E3S-C (horizontal type) E39-L102 1 Iron, zinc plating 2 (SUS304) (with spring and plain washers) (25.4) Stainless steel Hexagonal bolts M4 × 12 E3S-C (vertical type) (25.4) E39-L103 1 Iron, zinc plating 2 (SUS304) (with spring and plain washers) E3S-CR62/67 (25.4) E3Z pre-wired model Stainless steel Slotted/Phillips screws M3 × 8 (25.4) 1 Stainless steel (SUS304) 2 E39-L104 (SUS304) (with spring and plain washers) E32-R21 (for installation of 10 E39-R3) (25.4) Stainless steel E39-L109 1 --- --- --- E32-S15-@ (13.2) (SUS430) Stainless steel E39-L114 2 Phillips screws M5 × 10 Iron, zinc plating 4 E3MC (28) (SUS430) Stainless steel Phillips screws M5 × 8 Iron, zinc plating 4 1 E3MC E39-L115 (SUS304) Slotted/Phillips screws M3 × 8 Iron, nickel plating 2 Stainless steel E39-L116 1 --- --- --- E3T-S (9/15) (SUS304) Stainless steel E39-L117 1 --- --- --- E3T-S (9/15) (SUS304) Stainless steel E39-L118 1 --- --- --- E3T-S (9/15) (SUS304) Stainless steel E39-L119 1 --- --- --- E3T-F (8) (SUS304) 11 Stainless steel E39-L120 1 --- --- --- E3T-F (8) (SUS304) Phillips screws M2.3 × 8 Iron, zinc plating 4 E39-L127-T1 Iron, zinc plating 1 Spring washer M2.3 Iron, zinc plating 4 Phillips screws M2.3 × 8 Iron, zinc plating 4 E39-L127-T2 Iron, zinc plating 1 E3C-S10 (7.5) Spring washer M2.3 Iron, zinc plating 4 Phillips screws M2.3 × 8 Iron, zinc plating 4 E39-L127-T3 Iron, zinc plating 1 Spring washer M2.3 Iron, zinc plating 4 Note: Applicable models that appear shaded come with the Mounting Brackets at left as accessories. 2 E39-L/F39-L/E39-S/E39-R Accessories Applicable sensor Page Fitting Model Count (mounting pitch on materials Description Material Count Dimensions sensor side) Slotted/Phillips screws M4 × 25 Stainless steel (SUS304) 2 Stainless steel Spring washer M4 Stainless steel (SUS304) 2 E3G-R1@ (25) 1 E39-L131 (SUS304) E3G-L7@ (25) Plain washer M4 Stainless steel (SUS304) 2 Nuts M4 Stainless steel (SUS304) 2 Slotted/Phillips screws M4 × 25 Stainless steel (SUS304) 2 Stainless steel Spring washer M4 Stainless steel (SUS304) 2 E3G-R1@ (25) 1 E39-L132 (SUS304) E3G-L7@ (25) Plain washer M4 Stainless steel (SUS304) 2 Nuts M4 Stainless steel (SUS304) 2 Slotted/Phillips screws M4 × 35 Stainless steel (SUS304) 2 Stainless steel Spring washer M4 Stainless steel (SUS304) 2 E3G-MR19 (T) E39-L135 1 (SUS304) E3G-ML79 (T) Plain washer M4 Stainless steel (SUS304) 2 12 Nuts M4 Stainless steel (SUS304) 2 Slotted/Phillips screws M4 × 35 Stainless steel (SUS304) 2 Stainless steel Spring washer M4 Stainless steel (SUS304) 2 E3G-MR19 (T) 1 E39-L136 (SUS304) E3G-ML79 (T) Plain washer M4 Stainless steel (SUS304) 2 Nuts M4 Stainless steel (SUS304) 2 Stainless steel Slotted/Phillips screws M3 × 8 E3Z pre-wired model E39-L142 1 Stainless steel (SUS304) 2 (SUS304) (with spring and plain washers) (25.4) E3X-DA-S/MDA E3X-NA Stainless steel E39-L143 1 None --- --- E3C-LDA (SUS304) E2C-EDA E4C-UDA Stainless steel Slotted/Phillips screws M3 × 12 E3Z pre-wired model E39-L144 1 Stainless steel (SUS304) 2 (SUS304) (with spring and plain washers) (25.4) Stainless steel E39-L148 1 None --- --- E3X-NA (SUS304) Iron, E39-L149 1 None --- E3Z-G black coating Holder/bracket PBT (polybutylene tereph- 1 thalate) Shaft (brace) Stainless steel (SUS304) 1 E3Z (25.4) Stainless steel 1 Bolt with hexagonal hole Stainless steel (SUSXM7) 1 E3S-R6@/R8@ (20) E39-L150 (SUS304) E39-R3 Nut Stainless steel (SUS304) 1 13 Phillips screw Stainless steel (SUSXM7) 1 Slotted/Phillips screws Stainless steel (SUS304) 2 Holder/bracket PBT (polybutylene tereph- 1 thalate) Shaft (brace) Stainless steel (SUS304) 1 E3Z (25.4) Stainless steel 1 Bolt with hexagonal hole Stainless steel (SUSXM7) 1 E3S-R6@/R8@ (20) E39-L151 (SUS304) E39-R3 Nut Stainless steel (SUS304) 1 Phillips screw Stainless steel (SUSXM7) 1 Slotted/Phillips screws Stainless steel (SUS304) 2 Stainless steel Slotted/Phillips screws M3 × 8 Stainless steel (SUSXM7) E3Z pre-wired model E39-L153 1 2 (SUS304) (with spring and plain washers) Stainless steel (SUS304) (25.4) Note: Applicable models that appear shaded come with the Mounting Brackets at left as accessories. 3 E39-L/F39-L/E39-S/E39-R Contact Mounting Plates [Refer to Dimensions on page 13.] Page Model Material Count Applicable type Dimensions E39-L60 PBT (polybutylene terephthalate) 1 E3S-R@613 Note: Applicable models that appear shaded come with the Mounting Brackets at left as accessories. Slits Model Slit width Installation procedure Applicable type E3JM-10@4 (T)-N E39-S39 Width 1 × 20 mm Seal type E3JK-5@@-N E39-S60 Width 0.5, 1 × 15 mm Seal type E32-T16 E39-S61 Width 0.5, 1, 2, 4 × 11 mm E3S-CT@1 E39-S63 0.5-mm dia., 1 mm E3T-ST1@ E39-S64 0.5-mm dia., 1 mm E3T-FT1@ E39-S65A 0.5 mm dia. E39-S65B 1-mm dia. Plug-in type E39-S65C 2-mm dia. E3Z-T@@ E39-S65D Width 0.5 × 10 mm E39-S65E Width 1 × 10 mm E39-S65F Width 2 × 10 mm E32-T16P E39-S68 Width 0.5, 1 × 13.4 mm Seal type E32-T16PR Note: Applicable models that appear shaded come with the Slits at left as accessories Reflectors (Refer to Dimensions on page 14.) Non-fogging Special Reflec- Name Reflectors Reflectors reflective plate tor for E3ZM-B Item Model E39-R1 E39-R1S E39-R1K E39-R2 E39-R6 E39-R10 E39-RP1 Directional angle 30° min. *130° min. *230° min. Ambient operating −25 to 55°C −40 to 60°C temperature range Ambient storage −40 to 70°C −40 to 55°C −40 to 70°C temperature range Ambient operating 35% to 85% 35% to 95% 35% to 85% humidity range Ambient storage 35% to 95% humidity range Degree of protection IEC IP67 Accessories --- *1. 40° or higher for E3JM-R and E3JK-R. *2. 40° or higher for E3G-R. Name Small reflector Tape reflector * E39-RS1 E39-RS2 E39-RS3 Item Model E39-R9 E39-R3 E39-R4 E39-R37-CA * E39-RS1-CA E39-RS2-CA E39-RS3-CA Directional angle 30° min. Ambient operating −25 to 55°C temperature range Ambient storage −40 to 70°C 0 to 40°C temperature range Ambient operating 35% to 95% 35% to 85% humidity range Ambient storage 35% to 95% 35% to 85% humidity range Degree of protection IEC IP67 Mounting Brack- Phillips screws M3 Accessories --- ets E39-L104 --- × 3, spring wash- --- (with screws) ers M3, nuts M3 * Models ending in the suffix “-CA” are reflectors only for E3T-SR4@. Name Laser Reflectors Short-distance transpar- Standard Sheets ent object detection Item Model E39-R12 E39-R13 E39-R14 E39-RS4 E39-RS5 Ambient operating −10 to 55°C (No icing) temperature range Ambient storage −25 to 70°C (No icing) temperature range Ambient operating 35 to 85% (No condensation) humidity range Ambient storage 35 to 85% (No condensation) humidity range 4 E39-L/F39-L/E39-S/E39-R (Unit: mm) Mounting Bracket Dimensions Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. E39-L2 E39-L4 Four, R1.6 4 5 3.2 20 33 4 3.2 Four, 20 R1.6 11 1.2 2.3 3.2 5.5 92.1 82.1 Material: Iron 20±0.2 10.2 58 20.2 Optical axis Material: Iron 5 41 25.4 Two, 4.2 3.2 dia. Two, M4 4.2 slotted, hexagonal 5 1.6 5.6 bolts 2.1R 25 25.4 9 29.1 E39-L6 E39-L31 Four, R1.6 6.5 25.4 3.2 4.2 17 12 20 10.5 5 4.2 3.2 3.9 5 4.2 6 6 1.6 5 4.2 Material: Iron (R2.1) 3.9 1 Material: Iron 4.2 3.2 10.5 4.2 20 17 12 5 3.2 6.5 25.4 12 39 R3 8 Two, M3 6 4.5 dia. max. Pushing out height: 0.6 min. 1 E39-L40 18±0.1 R3.2 6 dia. R3.2 12 22 10±0.1 6.4 49 6.4 Two, R5 7 42±0.1 50 Two, R5 2 Material: Iron 40±0.1 5 Two, 4.4 dia. Two, R5.6 Two, R5 Two, R5 60 R2.2 R56.6±0.1 31.2 21.9 60° 45° R2.2 4.4 24 10° 58 5 E39-L/F39-L/E39-S/E39-R E39-L41 E39-L42 R1.6 R1.6 5.5 7 3.2 11 6.5 8 12 3.2 5 3.2 4.5 13.5 3.2 1 5 23 3.2 3.2 R1.6 27 1 3.2 4.5 R1.6 Material: Iron 15.5 3.2 11.5 10 Material: Iron 17.5 21 17 15.5 10±0.1 R3 2-M3 6 4.5 dia. max. Pushing out height: 0.6 min. 1 E39-L43 E39-L44 30 1.2 3.5 3.5 R2 7 16.2 8.7 23.2 3.5 R3.5 1.2 1.2 Four, 3.2 dia. 25.4 40 9 R2 6 3.2 dia. Material: Stainless 18 36 20° 7.5 steel (SUS304) 20° R2 3.4 15 3.2 6 14 Material: Stainless steel (SUS304) 13 6 5 R1 3.4 R1 31.2 R1 3.4 E39-L51 E39-L53 6.5 Two, 3 dia. 20 35.5 R3.2 12 E3A2 22 12.4 E3A-M E3A3 45 6.4 6 dia. R3.2 6.4 OA-5, OA-5N 12.4 18 6 39.5 Material: Iron 37.5 35 1.6 4.5 4.5 dia. R2.25 Material: Iron 13.5 E3A2, OA-5N 6.5 29.5 E3A-M, OA-5 20 70 E3A3 ±0.2 40 5 54.5 58 E39-L54V E39-L69 3.2 5 ±0.2 20 3.1 10.7 4.5 8 16.5 7.2 4.1 7.2 3.1 Material: Stainless steel (SUS304) 3.2 1.2 4 23 15 3.1 7.2 7.2 16.5 10.7 Material: Stainless steel (SUS304) 3.1 4.1 5 20±0.2 0.5 30 6 ±0.1 R20 R25.4±0.1 E39-L/F39-L/E39-S/E39-R E39-L70 E39-L83 16.3 20±0.2 Six, R1.2 1.8 0.4 16.3 20±0.2 3.1 3.2 10.7 16.5 7.2 3.5 4.3 11 17.6 Two, R1.6 3.1 7.2 7.2 Material: Stainless steel (SUS304) 3.1 2.05 R1.6 Material: Stainless steel 2.8 3.2 2.05 31.7±0.1 2.05 1.2 10 3.1 11.4 3.1 7.2 7.2 16.5 10.7 41.7 E39-L85 E39-L86 9.8 15.6 4.2 20 2.6 37 32 4.2 (44.7) 15 8 32.2 39 9.2 4.2 4.2 8 9.2 12.9 2.6 Material: Stainless steel (SUS304) 4.2 16 4.2 Material: Stainless steel (SUS304) 31 12.9 31 43.8 43.8 31 12.9 1.5 19 4.2 9.2 20 12 4.2 32.2 28.9 15.1 1.5 E39-L87 10 9.2 4.2 41 25.4 4.2 4.2 10 25 12.4 4.1 1.5 6.2 8.2 7.2 25.4 4.2 Material: 75.6 Stainless steel (SUS304) 43.7 2.6 15 7 E39-L/F39-L/E39-S/E39-R E39-L93FH E39-L93FV 26.3 26.3 20.9 20.9 48 48 8 E3Z 8 E3Z 15° 15° 15° 15° 12 dia. 12 dia. 208 215 188 183 181 176 59 53 54 48 6 30 24 12 Two, 6.6 dia. 35 50 35 Two, 6.6 dia. 53 50 45 29 26 22.5 48 E39-L93H E39-L93V 26.3 26.3 20.9 48 20.9 48 8 E3Z 8 E3Z 15° 15° 15° 15° 12 dia. 12 dia. 208 216 181 189 176 184 59 54 49 44 30 20 10 8 32 Two, 6.6 dia. 46 Two, 6.6 dia. 15 10 34 27 48 24 8 14 32 45 8 E39-L/F39-L/E39-S/E39-R E39-L93XY E39-L94 4 Four, R1.6 197 4.8 3.2 165 8 +0.2 20 0 22 35 4 23 Pipe (B) 3.2 38 15 20 1.2 Two, R1.6 20.9 26.3 2.3 3.2 5.8 E3Z 40 ±0.2 19 Holder (A) 170 52 15°15° 8 Material: Iron 12 dia. 3.2 dia. 11 24 48 E39-L96 Two, M3 Tap processing 4.3 dia. 213 189 45° 17.5° 60 17.5° 45° E39-R1 reflector E39-L96 9.5 27 Center (order separately) 15.5 of pole 29.5 34.5 12 dia. brace Material: Stainless steel Note: The E39-L93XY consists of only the one joint holder (SUS304) (A) and pipe, and the two hexagonal bolts and nuts. It 2-mm-thick cannot be mounted to the Sensor alone. E39-L97 E39-L98 Mounting Holes Mounting Holes 30° 30° Two, M6 30° 30° Stainless steel Two, M6 Two, R28 (SUS 304) ±0.2 44 56 dia. ±0.2 44 56 dia. Stainless steel (SUS 304) Four, R3.3 Two, R22 8.2 Four, R3.3 E3S-R Two, R22 4 6.5 (For E3S-B) 13.5 16 (For E3Z) (For E3S-R) 20 E3S-R An attached An attached screw 25.4 20 screw 2.6 16 61 34 48 26 38.5 20 25 16 2 3 20 16 2 8 20 56 (A)* 15 56 24 50 (E3S-R) 34 * Mounting Bracket can be attached to side (A) 9 4.6 4.6 E39-L/F39-L/E39-S/E39-R E39-L102 E39-L103 25.4±0.1 31±0.1 4.2 12 12 20 20 9.2 9.2 4.2 4.2 4.2 8.3 6.2 12.9 6.2 12.9 1.5 1.5 8.3 4.2 4.2 Material: 9.2 9.2 17.3 20 Material: Stainless steel (SUS304) 9.3 4.2 12 4.2 Stainless steel (SUS304) ±0.1 25.4 31±0.1 38.2 43.8 E39-L104 E39-L109 R1.7 R1.7 3.4 Mounting Holes 5.8 Two, M3 14° 12.5 (13.7) 10.6 R20 5.4 36 R1 6 4.5 3.4 3.4 29 6 8.2 8.2 3.2 1.2 Two, 3.2 dia. R3.5 46 16 36 12 Material: Stainless steel 3.5 Material: 3.4 (SUS430) Stainless steel R25.4 (14.7) 37.8 (39) 6 (SUS304) 26 32.6 3.2 45.8 8.8 R1.6 R1 10° E39-L114 E39-L115 6.8 6.8 Two, M3 58 28 22 Four, 5.5 dia. 5.2 7 10 11 28 8.4 37 26 21 35 5.2 Six, R2.6 33.2 15° 15° 100 5.2 33 70 R28 R28 54 5 15 R1 11.5 Material: 3 Stainless steel (SUS430) 42 Material: Stainless steel (SUS304) 50 10 E39-L/F39-L/E39-S/E39-R E39-L116 E39-L117 Nut Plate Nut Plate (Four, R2) (Four, R2) (Two, R1.7) 3 3 Three, Three, 9 9 M2 (17.8) M2 15 20.5 15 20.5 7.5 Two, 3.4 R1 4.1 max. 90° 1.6 (Two, R2) 7 7 1.2 (Two, R2) 5 (Two, R2) (Two, R1.7) Two, R2 2.4 4 11.2 2.2 3.1 11 4 (Two, R1.1) 9 31.2 9.5 11.518 (23) 15 9 90° Material: Material: Stainless steel (SUS304) Stainless steel (SUS304) 3.1 (Two, R1.2) Two, 2.2 3.4 5 1.2-mm-thick 1.2-mm-thick (Two, R1.7) 1.2 2.4 5 (Two, R1.1) R1.5 max. 4.5 10 10 (11.2) E39-L118 E39-L119 Nut Plate 1.2 (Four, R2) 11.5 90° 3 10.5 90° 1.2 11.5 Three, 9 90° M2 15 15 20.5 22.7 Four, M2 Tap processing 3.2 8 2.4 (Two, R1.7) 5 7 4.5 2.4 3.1 16 12 8 4 9 2.4 9 15 (23) 11.518 7 9 Two, 2.2 Material: 3.1 Material: (Two, R1.1) 5 3.4 Stainless steel (SUS304) (Four, R2) Stainless steel (SUS304) 1.2-mm-thick 1.2-mm-thick E39-L120 E39-L127-T1 Four, 3.2 dia. E39-L127-T2 (Mounting 4.2 bracket holes) 20 E39-L127-T3 (5.4) 4 10 14 1.2 Four, M2.3 22.5 12 A (Mounting sensor 1.6 5.6 5.6 screws) Four, M2 Tap processing 2.3 8 3.2 7.5 15 2.4 30 16 12 8 9 2.4 Two, 5 dia. 20 6 13.5 A+24 Material: Iron Material: Stainless steel (SUS304) Model Dimension A (mm) 1.2-mm-thick E39-L127-T1 10 E39-L127-T2 20 E39-L127-T3 30 11 E39-L/F39-L/E39-S/E39-R E39-L131 E39-L132 6.4 22 5.5 Two, R3.2 ±1° 1.5 90° 11.5 15° 23.5 6.4 23.5 23.5 2-R3.2 11.5 11.5 R34 Two, R3.2 35 6.4 8.5 Two, R2.2 ±0.1 1.5 25 Four, R1 5.5 10 22 4.4 ±0.1 25 45 R25 R25 ±0.1 25 4.2 4.2 65.5 R34 Four, R2.1 6.4 4.2 dia. Two, Two, R3.2 35.5 15° 4.2 dia. Material: 23.5 90°±1° Stainless steel (SUS304) 8.5 Material: Stainless steel (SUS304) 45 E39-L135 E39-L136 6.4 Two, R3.2 90 6.4 15 2 28 18° ±1 90° Two, R3.2 R44 32 7 2° 5° 48 88 2 Two, 4.2 dia. 37±0.1 83 28 74 15 72 Eight, 4.2 Two, 6.4 5.5 37 R3.2 20.5 ±0.1 74 5° 2-4.2 32 123 118 Two, 85 74 R3.2 R82.7 Four, R2.1 Material: 10° 6.4 R82.8 54.62 R82.7 Stainless steel (SUS304) R44 5° ±1° 90° R82.7 18° 5° Fourteen, 2° R2.1 Material: Stainless steel (SUS304) 58 E39-L142 E39-L143 14 8.7 7 22 15.8 Four, 3.4-dia. holes 14 34.8 22 (10.3) 2.5 3 16 37 25.4 7.3 5.3 55 26.8 7 4.5 15.3 Two, 3.2 dia. R12 14° 7 3 16 3 Four, R1.7 4.5 1.5 10.3 10 max. 7 3.4 12 5 Material: Stainless steel (SUS304) 4 1 4.5 3.4 1 Material: Stainless steel (SUS304) 7.8 12 E39-L/F39-L/E39-S/E39-R E39-L144 E39-L148 25 16 R1.7 R1.7 Two, R17 23 12 12 max. 9 3.4 Two, 50° 21 2 2 Four, R1.6 3.4 14.2 3.5 Four, R1.6 22 Two, 3.2 dia. 9.5 16 7.3 4.3 25.4 Two, R25.4 38.5 1.5 3 3 9.1 1.5 27 7.3 4 35 Material: Stainless steel (SUS304) Material: Stainless steel (SUS304) 5° E39-L149 E39-L150 20 5.5 E39-L151 14 4.5 Two, 3.5 52 13.6 45 Polybutylene Four, 4.5 dia. 5.4 terephthalate 35 22.7 6.8 Four, R3 42.5 24 19 40.5 Two, 3.5 dia. 10 dia. Stainless steel (SUS 304) L 5.5 10.5 8 Two, 6.5 dia. 21 4.5 1 Polybutylene 32 34 19 terephthalate 46 Length (mm) Model L E39-L150 65 E39-L151 165 E39-L153 14 8 3.5 7 7 4 3.5 Two, R1.75 4-3 4 Eight, R1.75 Four, 3.5 25.4 41 10 1.2 22 (Unit: mm) Contact Mounting Plate Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. E39-L60 (33) 11.75 6.5 6.5 20 2.5 11.75 3.4 dia. 5 2.5 3.4 dia. 5 Material: PBT (polybutylene terephthalate) 13 Two, 3.5 dia. E39-L/F39-L/E39-S/E39-R (Unit: mm) Reflector dimensions Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. E39-R1 E39-R2 E39-R9 30.9 × 30.9 E39-R1S E39-R1K * 42.3 (21) 8 4 15 3.5 Two, Material, 25 5.5 3.6 dia. Material, reflective surface: acrylic 35.4 8 reflective surface: acrylic Material, Rear surface: ABS Rear surface: ABS reflective surface: acrylic Rear surface: ABS 40.3 80.8 34 Two, 3.5 dia. 74.5 7.5 Four, 3.5 dia. 7.5 E39-R10 7 7 7 47 × 47 8 59.9 52 61.4 59.9 52 (30.4) 8 10 5 1.6 2.7 30 3.5 Two, 7 2.7 1.6 * E39-R1K only 40 5.5 4 dia. Material, 6.5 34 Coating on reflective surface 51.6 8 reflective surface: acrylic Rear surface: ABS E39-R3 E39-R4 E39-R6 13.7 4 4.9 2 9.7 23 19 Material, reflective surface: acrylic 4 Rear surface: ABS Material, 29 Material, 1.4 2 Two, 2.2 dia. 3.4 6 4.5 reflective surface: acrylic reflective surface: acrylic 3.4 R20 Rear surface: ABS Rear surface: ABS 14° 13.7 7 40 18.45 4.8 0.2 34 E39-R37-CA 22.9 20 0.2 Mounting bracket Reflector 13.7 Adhesive tape side 11 8.7 13.7 Eight, R1 (1.1) 22.5 19.3 16 Two, 3.2 dia. 60 5240 23 18.3 10.2 18.3 23 R25.4 Two, 25.4 34.8 38 34 Reflector: t0.5 41.8 3.2 M3 Two, R1.55 (adhesive tape side) 3.5 Two, 3.1 dia. Mounting Material: 1.2 Bracket: t 0.5 10.1 Stainless Mounting plate: stainless steel (SUS301) 3.5 steel 2.6 Reflective surface: acrylic (SUS304) 10° 1.2 Note: The reflective plate and mounting plate (1) come as a set. Reflectors only for E3T-SR4@. Retroreflector for E3ZM-B E39-RP1 8.5 44 3 0.2 80 72 63.6 Reflector 14 R3.7 R3.2 Four, R1.4 R3.7 E39-L/F39-L/E39-S/E39-R E39-RS1 E39-RS3 E39-RS1-CA * E39-RS3-CA * 35 0.5 10 80 0.5 Adhesive Four, R1 tape side Material: Acrylics E39-RS2 E39-RS2-CA * 70 40 0.5 35 Adhesive Four, R1 Material: Acrylics tape side Adhesive Material: Acrylics Four, R1 tape side E39-R13 E39-R12/R14 5.5 4 24 45 2.9 23 1.6 7 15 6 7 12 30 23 17.2 37 E39-RS4 E39-RS5 0.4 0.4 108 195 46 22 Adhesive Adhesive tape side tape side * Models ending in the suffix “-CA” are reflectors only for E3T-SR4@. (Unit: mm) Sensitivity Adjuster Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. E39-G1 4 9.3 dia.13 dia. Material: Polycarbonate (Unit: mm) Sensitivity Adjustment Driver Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. E39-G2 8 dia. 0.8 1 (12.6) 7 dia. Material: Polycarbonate 15 Four, R1 Two, 3.4 dia. Two, 3.4 dia. Four, R3 Four, R2 R3.2 E39-L/F39-L/E39-S/E39-R (Unit: mm) Lens Unit Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. E39-F1V 0.5-dia. hole 8.9 4 dia. M2.6 × 0.45 6 Effective depth: 3.8 Countersunk with straight edge, depth: 0.9 (Unit: mm) Connection Sockets Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. Front Connection Socket Terminal arrangement/Inter- Eleven, M3.5 × 7 4 Sems screw 22 7 nal connections (top view) PF113A Mounting Holes 2 1 11 10 Two, M4 or 4.5 dia. 3 9 52 max. 35.4 34±0.2 4 4 Note: Rail mounting also possible. 5 34 4 3.5 2 5 6 7 8 43 max. 31 max. Front Connection Socket Terminal arrangement/Inter- Mounting Holes 3.4 nal connections (top view) PYF08A 6 Two, M3 or M4 Two, 4.2 × 5 mounting holes Eight, M3 × 8 or 4.5 dia. Sems screw 4 1 8 5 ±0.3 72 max. 35.4 59 12 9 14 13 4 15±0.2 6 23 max. 16.5 Note: Rail mounting also possible. 30 max. Front Connection Socket PCB Cutout Dimensions Terminal arrangement/Internal connections (bottom view) PY08 Mounting Holes 13.2 Eight, 3 × 1.2 ellipse hole 4.1 1 4 5.8 25.5 max. ±0.2 5 8 25.8 12.65 29.5 max. 6.35 6.4 9 12 Eight, 1.3 dia. holes 2.7 7.7 2.6 4.2 13 14 +0.2 21.4 0 24 max. 20 max. 16 Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. part of all quotes, agreements, purchase orders, acknowledgments, price lists, BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE catalogs, manuals, brochures and other documents, whether electronic or in PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR writing, relating to the sale of products or services (collectively, the "Products") INTENDED USE. Omron further disclaims all warranties and responsibility of by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron any type for claims or expenses based on infringement by the Products or oth- objects to any terms or conditions proposed in Buyer’s purchase order or other erwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obli- documents which are inconsistent with, or in addition to, these Terms. gation hereunder shall be, at Omron’s election, to (i) replace (in the form 2. Prices; Payment Terms. All prices stated are current, subject to change with- originally shipped with Buyer responsible for labor charges for removal or out notice by Omron. Omron reserves the right to increase or decrease prices replacement thereof) the non-complying Product, (ii) repair the non-complying on any unshipped portions of outstanding orders. Payments for Products are Product, or (iii) repay or credit Buyer an amount equal to the purchase price of due net 30 days unless otherwise stated in the invoice. the non-complying Product; provided that in no event shall Omron be responsi- 3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices ble for warranty, repair, indemnity or any other claims or expenses regarding sent to Buyer after deducting transportation charges, taxes and duties, and will the Products unless Omron’s analysis confirms that the Products were prop- be allowed only if (i) the invoice is paid according to Omron’s payment terms erly handled, stored, installed and maintained and not subject to contamina- and (ii) Buyer has no past due amounts. tion, abuse, misuse or inappropriate modification. Return of any Products by 4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or Buyer must be approved in writing by Omron before shipment. Omron Compa- the maximum legal rate, whichever is less, on any balance not paid within the nies shall not be liable for the suitability or unsuitability or the results from the stated terms. use of Products in combination with any electrical or electronic components, 5. Orders. Omron will accept no order less than $200 net billing. circuits, system assemblies or any other materials or substances or environ- 6. Governmental Approvals. Buyer shall be responsible for, and shall bear all ments. Any advice, recommendations or information given orally or in writing, costs involved in, obtaining any government approvals required for the impor- are not to be construed as an amendment or addition to the above warranty. tation or sale of the Products. See http://www.omron247.com or contact your Omron representative for pub- 7. Taxes. All taxes, duties and other governmental charges (other than general lished information. real property and income taxes), including any interest or penalties thereon, 14. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE imposed directly or indirectly on Omron or required to be collected directly or FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, indirectly by Omron for the manufacture, production, sale, delivery, importa- LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY tion, consumption or use of the Products sold hereunder (including customs WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS duties and sales, excise, use, turnover and license taxes) shall be charged to BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. and remitted by Buyer to Omron. Further, in no event shall liability of Omron Companies exceed the individual 8. Financial. If the financial position of Buyer at any time becomes unsatisfactory price of the Product on which liability is asserted. to Omron, Omron reserves the right to stop shipments or require satisfactory 15. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and security or payment in advance. If Buyer fails to make payment or otherwise their employees from and against all liabilities, losses, claims, costs and comply with these Terms or any related agreement, Omron may (without liabil- expenses (including attorney's fees and expenses) related to any claim, inves- ity and in addition to other remedies) cancel any unshipped portion of Prod- tigation, litigation or proceeding (whether or not Omron is a party) which arises ucts sold hereunder and stop any Products in transit until Buyer pays all or is alleged to arise from Buyer's acts or omissions under these Terms or in amounts, including amounts payable hereunder, whether or not then due, any way with respect to the Products. Without limiting the foregoing, Buyer (at which are owing to it by Buyer. Buyer shall in any event remain liable for all its own expense) shall indemnify and hold harmless Omron and defend or set- unpaid accounts. tle any action brought against such Companies to the extent based on a claim 9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation that any Product made to Buyer specifications infringed intellectual property unless Buyer indemnifies Omron against all related costs or expenses. rights of another party. . Omron shall not be liable for any delay or failure in delivery Any intellectual property in the Products is the exclu- 10. Force Majeure 16. Property; Confidentiality. resulting from causes beyond its control, including earthquakes, fires, floods, sive property of Omron Companies and Buyer shall not attempt to duplicate it strikes or other labor disputes, shortage of labor or materials, accidents to in any way without the written permission of Omron. Notwithstanding any machinery, acts of sabotage, riots, delay in or lack of transportation or the charges to Buyer for engineering or tooling, all engineering and tooling shall requirements of any government authority. remain the exclusive property of Omron. All information and materials supplied 11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron: by Omron to Buyer relating to the Products are confidential and proprietary, a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship and Buyer shall limit distribution thereof to its trusted employees and strictly except in “break down” situations. prevent disclosure to any third party. b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall 17. Export Controls. Buyer shall comply with all applicable laws, regulations and constitute delivery to Buyer; licenses regarding (i) export of products or information; (iii) sale of products to c. All sales and shipments of Products shall be FOB shipping point (unless oth- “forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of erwise stated in writing by Omron), at which point title and risk of loss shall regulated technology or information. pass from Omron to Buyer; provided that Omron shall retain a security inter- 18. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right est in the Products until the full purchase price is paid; and no course of dealing between Buyer and Omron shall operate as a waiver d. Delivery and shipping dates are estimates only; and of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder e.Omron will package Products as it deems proper for protection against nor- without Omron's written consent. (c) Law. These Terms are governed by the mal handling and extra charges apply to special conditions. law of the jurisdiction of the home office of the Omron company from which 12. Claims. Any claim by Buyer against Omron for shortage or damage to the Buyer is purchasing the Products (without regard to conflict of law princi- Products occurring before delivery to the carrier must be presented in writing ples). (d) Amendment. These Terms constitute the entire agreement between to Omron within 30 days of receipt of shipment and include the original trans- Buyer and Omron relating to the Products, and no provision may be changed . If any provi- portation bill signed by the carrier noting that the carrier received the Products or waived unless in writing signed by the parties. (e) Severability from Omron in the condition claimed. sion hereof is rendered ineffective or invalid, such provision shall not invalidate 13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the any other provision. (f) Setoff. Buyer shall have no right to set off any amounts Products will be free from defects in materials and workmanship for a period of against the amount owing in respect of this invoice. (g) Definitions. As used twelve months from the date of sale by Omron (or such other period expressed herein, “including” means “including without limitation”; and “Omron Compa- in writing by Omron). Omron disclaims all other warranties, express or implied. nies” (or similar words) mean Omron Corporation and any direct or indirect (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, subsidiary or affiliate thereof. EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL- Certain Precautions on Specifications and Use 1. Suitability of Use. Omron Companies shall not be responsible for conformity ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROP- with any standards, codes or regulations which apply to the combination of the ERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE Product in the Buyer’s application or use of the Product. At Buyer’s request, OVERALL EQUIPMENT OR SYSTEM. Omron will provide applicable third party certification documents identifying 2. Programmable Products. Omron Companies shall not be responsible for the ratings and limitations of use which apply to the Product. This information by user’s programming of a programmable Product, or any consequence thereof. itself is not sufficient for a complete determination of the suitability of the Prod- 3. Performance Data. Data presented in Omron Company websites, catalogs uct in combination with the end product, machine, system, or other application and other materials is provided as a guide for the user in determining suitabil- or use. Buyer shall be solely responsible for determining appropriateness of ity and does not constitute a warranty. It may represent the result of Omron’s the particular Product with respect to Buyer’s application, product or system. test conditions, and the user must correlate it to actual application require- Buyer shall take application responsibility in all cases but the following is a ments. Actual performance is subject to the Omron’s Warranty and Limitations non-exhaustive list of applications for which particular attention must be given: of Liability. (i) Outdoor use, uses involving potential chemical contamination or electrical 4. Change in Specifications. Product specifications and accessories may be interference, or conditions or uses not described in this document. changed at any time based on improvements and other reasons. It is our prac- (ii) Use in consumer products or any use in significant quantities. tice to change part numbers when published ratings or features are changed, (iii) Energy control systems, combustion systems, railroad systems, aviation or when significant construction changes are made. However, some specifica- systems, medical equipment, amusement machines, vehicles, safety equip- tions of the Product may be changed without any notice. When in doubt, spe- ment, and installations subject to separate industry or government regulations. cial part numbers may be assigned to fix or establish key specifications for (iv) Systems, machines and equipment that could present a risk to life or prop- your application. Please consult with your Omron’s representative at any time erty. Please know and observe all prohibitions of use applicable to this Prod- to confirm actual specifications of purchased Product. uct. 5. Errors and Omissions. Information presented by Omron Companies has been NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS checked and is believed to be accurate; however, no responsibility is assumed RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT for clerical, typographical or proofreading errors or omissions. ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO OMRON INDUSTRIAL AUTOMATION • THE AMERICAS HEADQUARTERS Schaumburg, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com OMRON CANADA, INC. • HEAD OFFICE OMRON ARGENTINA • SALES OFFICE Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com Cono Sur • 54.11.4783.5300 OMRON ELECTRONICS DE MEXICO • HEAD OFFICE OMRON CHILE • SALES OFFICE México DF • 52.55.59.01.43.00 • 001.800.556.6766 • mela@omron.com Santiago • 56.9.9917.3920 OMRON ELECTRONICS DE MEXICO • SALES OFFICE OTHER OMRON LATIN AMERICA SALES Apodaca, N.L. • 52.81.11.56.99.20 • 001.800.556.6766 • mela@omron.com 54.11.4783.5300 OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br OMRON EUROpE B.V. • Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. • Tel: +31 (0) 23 568 13 00 Fax: +31 (0) 23 568 13 88 • www.industrial.omron.eu Cat. No. &60B(/B)/B(6B(5B'6B(BB 0/12 Note: Specifications are subject to change. © 2012 Omron Electronics LLC Printed in U.S.A.