Liquid Leakage Point Sensor F03-16PS CSM_F03-16PS_DS_E_2_5 A New Liquid Leakage Point Sensor Has Been Added to the K7L Series. Fluoroplastic Coating on the Bottom Electrode Ensures Chemical Resistance. • Can be used in conjunction with Sensing Bands. • Stud screw mounting requires no tools for installation. • No tools means the Sensor can be wiped clean quickly and easily. • The optional Mounting Bracket enables faster installation than three-screw mounting. • Connect multiple Sensors to one K7L Amplifier for significant cost savings. Indicates models that allow free cutting. Ordering Information Sensors Product name Main material Cable material Electrode material Model Liquid Leakage Point Sensor Polyethylene Outer sheath: PVC SUS304 F03-16PS Inner sheath: Fluoroplastic SUS304 and fluoroplastic coating F03-16PS-F (See note 1.) Mounting Brackets (See note 2.) --- --- F03-26PS Terminal Block (See note 3.) Nylon 6.6 --- --- F03-20 Note: 1. The electrode is fluoroplastic-coated. 2. Use a commercially available bonding agent for PVC. One bag contains 10 Brackets. 3. One bag contains 10 Blocks. Specifications Wiring Diagram Any number of Sensors can be connected in parallel up to an overall Material Sensor Am- Polyethylene cable length of 400 m. Leakage areas cannot be specified with the plifier K7L. Conductor Outer sheath: PVC, Inner sheath: Fluorine resin K7L-AT50 (operating resistance: 50 MΩ max.): 60 m max. Core F03-16PS: SUS304 stainless steel K7L-U (operating resistance: 1 MΩ max.): 400 m max. F03-16PS-F: SUS304 and fluorine coating However, the leakage area cannot be identified with the K7L-AT50. Ambient operating −10 to 60°C 5 4 temperature range 4 4 6 3 3 3 Weight Approx. 30 g 7 2 2 2 F03-16PS Maximum number of Any number of Point Sensors can be connected 8 1 Liquid Leakage Point Sensor Point Sensors per as long as the following conditions are met. 4 4 Amplifier K7L-AT50 or K7L-U K7L-AT50 (K7L-AT50D cannot be used): 60 m 3 3 Liquid Leakage max. 2 2 Sensor Amplifier K7L-U (-UD cannot be used): 400 m max. F03-16PS 61F-GPN-V50: 200 m max. Liquid Leakage Point Sensor 4 4 3 3 2 2 Sensing Band F03-20 Terminal Block Total of 60 m max. (Sensing Band: 10 m max.) for the K7L-AT50 Total of 400 m max. for the K7L-U Mounting Methods Stud Screw Mounting Special Bracket Mounting Securing the Sensor with a Nut Securing the Sensor with a Wing Nut (See note.) Note: Use a commercially available bonding agent for PVC. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. 1 Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 2016.11 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2016 All Right Reserved.