Solid-state Relay G3FM 100-μA-max. Leakage Current, No Bleeder Resistor Required 1 mA to 500 mA micro-load switching. Switches to both AC and DC with no polarity. Switches for a wide range of voltages; 19.2 to 264 VAC, 19.2 to 125 VDC. Switches full- and half-wave rectifier AC loads. Same sizes and terminal arrangement as OMRON Power Relay MY Series. Operating indicator provided. Switches MY Series (without bleeder resistor). Superior surge absorption with a built-in varistor. Optimum SSR to control minute load, valves, and solenoids. Ordering Information Isolation Zero cross Indicator Applicable output load Rated input voltage Model function Photo-voltage o o o age No o Ye es s 0.5 A at 19.2 to 264 V 05 a 9 o 6 AC C 5 VDC G3FM-2R5SLN G3 5S coupler l 0.5 A at 19.2 to 125 VDC 0.5 A at 19.2 to 125 VDC 12 VDC 24 VDC Accessories (Order Separately) Connecting Socket Refer to page 244 for details. Item PYF08A-E PY08 PY08-02 PY08QN(2) Connecting Front connecting Back connecting Mounting method/ Track mounted/ Solder terminals PCB terminals Wrapping terminals Terminal type screw terminals Hold-down clip PYC-A1 PYC-P Specifications Ratings Model Input Output Rated Operating Impedance Voltage levels Applicable load voltage voltage Must Must Rated Load Load Inrush operate release load voltage curent current voltage voltage voltage G3FM-2R5SLN 5 VDC 4 to 6 VDC 250 Ω±20% 4 VDC 1 VDC min. 24 to 19.2 to 1 to 6 A max. 240 VAC 264 VAC 500 mA (10 ms) 12 VDC 9.6 to 600 Ω±20% 9.6 VDC 24 to 19.2 to 14.4 VDC max. 110 VDC 125 VDC 24 VDC 19.2 to 1.2 kΩ±20% 19.2 VDC 28.8 VDC 191 G3FM G3FM Characteristics Operate time 5 ms max. Release time 10 ms max. Output ON voltage drop 3 V (RMS) max. Leakage current 0.1 mA max. Insulation resistance 100 MΩ min. (at 500 VDC) Dielectric strength 1,500 VAC, 50/60 Hz for 1 min Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude 2 Shock resistance 1,000 m/s Ambient temperature Operating: –30°C to 80°C (with no icing or condensation) Storage: –30°C to 100°C (with no icing or condensation) Ambient humidity Operating: 45% to 85% Weight Approx. 50 g Engineering Data Load Current vs. Ambient Inrush Current Resistivity Temperature Characteristics Non-repetitive (Keep the inrush current to half the rated val- ue if it occurs repetitively.) G3FM-2R5SLN G3FM-2R5SLN Ambient temperature (°C) Energizing time (ms) Dimensions Note: All units are in millimeters unless otherwise indicated. Terminal Arrangement/ Internal Connections (Bottom View) 1 4 28 max. 5 8 Load Load Load power supply 9 12 21.5 max. 36.5 max. 42.5 max. 13 14 Input – + – + Input voltage 192 Load current (A) Inrush current (A. Peak) G3FM G3FM Precautions Refer to pages 11 to 19 for general precautions. The SSR case serves to dissipate heat. Install the relays so that they are adequately ventilated. If poor ventilation is unavoidable, re- duce the load current by half. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. K072-E1-1A 193