Solid-state Relay G3NE Compact, Low-cost, SSR Switching 5 to 20 A Wide load voltage range: 75 to 264 VAC Dedicated, compact aluminum PCB and power elements used. Built-in varistor effectively absorbs external surges. Quick-connect #110 input terminals and #250 output connections. Approved by UL and CSA. RCE Ordering Information Isolation Zero cross Indicator Rated output load Rated input voltage Model function (applicable output load) Phototriac Yes No 5 A at 100 to 240 VAC 5, 12, 24 VDC G3NE-205T-US (5 A at 75 to 264 VAC) G3NE-205T-2-US 10 A at 100 to 240 VAC G3NE-210T-US (10 A at 75 to 264 VAC) G3NE-210T-2-US 20 A at 100 to 240 VAC G3NE-220T-US (20 A at 75 to 264 VAC) G3NE-220T-2-US No 5 A at 100 to 240 VAC G3NE-205TL-US (5 A at 75 to 264 VAC) G3NE-205TL-2-US 10 A at 100 to 240 VAC G3NE-210TL-US (10 A at 75 to 264 VAC) G3NE-210TL-2-US 20 A at 100 to 240 VAC G3NE-220TL-US (20 A at 75 to 264 VAC) G3NE-220TL-2-US Note: When ordering, specify the input voltage. Accessories (Order Separately) Heat Sink The following heat sinks are thin and can be track-mounted. See Dimensions for details. Model Applicable SSR Y92B-N50 G3NE-205T(L)/-210T(L) Y92B-N100 G3NE-220T(L) Specifications Ratings Input Rated voltage Operating voltage Voltage level Input impedance Must operate Must release With zero cross Without zero cross function function 5 VDC 4 to 6 VDC 4 VDC max. 1 VDC min. 250 Ω±20% 300 Ω±20% 12 VDC 9.6 to 14.4 VDC 9.6 VDC max. 600 Ω±20% 800 Ω±20% 24 VDC 19.2 to 28.8 VDC 19.2 VDC max. 1.6 kΩ±20% Note: Each model has 5-VDC, 12-VDC, and 24-VDC input versions. 176 G3NE G3NE Output Model Applicable load Rated load Load voltage Load current Inrush current voltage range g With heat sink Without heat sink G3NE-205T(L)-(-2)US 100 to 240 VAC 75 to 264 VAC 0.1 to 5 A 0.1 to 5 A 60 A (60 Hz, 1 cycle) G3NE-210T(L)-(-2)US 0.1 to 10 A 0.1 to 5 A 150 A (60 Hz, 1 (see note) cycle) G3NE-220T(L)-(-2)US 0.1 to 20 A 0.1 to 5 A 220 A (60 Hz, 1 (see note) cycle) Note: These values apply when using a dedicated radiator or a radiation plate of specified size. Characteristics Item G3NE-2��T-(-2)US G3NE-2��TL-(-2)US Operate time 1/2 of load power source cycle + 1 ms max. 1 ms max. Release time 1/2 of load power source cycle + 1 ms max. Output ON voltage drop 1.6 V (RMS) max. Leakage current 5 mA max. (at 100 VAC) 10 mA max. (at 200 VAC) Insulation resistance 100 MΩ min. (at 500 VDC) Dielectric strength 2,000 VAC, 50/60 Hz for 1 min Vibration resistance Malfunction: 10 to 55 Hz, 1.5-mm double amplitude 2 Shock resistance Malfunction: 1,000 m/s Ambient temperature Operating: –30°C to 80°C (with no icing nor condensation) Storage: –30°C to 100°C (with no icing nor condensation) Ambient humidity Operating: 45% to 85% Approved standards UL508 File No.E64562/CSA C22.2 (No.0, No.14) File No. LR35535 TÜV R9051064 (VDE0435) (EN60950) Weight Approx. 37 g Engineering Data Load Current vs. Ambient Temperature Characteristics G3NE-205T(L)-(-2)US G3NE-210T(L)-(-2)US G3NE-220T(L)-(-2)US With standard heat sink (Y92B-N100) or With standard heat sink (Y92B-N50) or aluminum plate measuring 100 mm aluminum plate measuring 300 mm x Without heat sink 300 mm x 2 mm (W x H x D) x 100 mm x 2 mm (W x H x D) Without heat sink Without heat sink Ambient temperature (°C) Ambient temperature (°C) Ambient temperature (°C) 177 Load current (A) Load current (A) Load current (A) G3NE G3NE Inrush Current Resistivity Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.) G3NE-205T(L)-(-2)US G3NE-210T(L)-(-2)US G3NE-220T(L)-(-2)US Energizing time (ms) Energizing time (ms) Energizing time (ms) Dimensions Note: All units are in millimeters unless otherwise indicated. G3NE-205T(L)/210T(L)/220T(L)-(-2)US 3.5 dia. hole Terminal Arrangement/ 47.5 max. Internal Connections (Top View) 37.5 max. 14.5 3 + 1 30±0.5 Input Input Input Load voltage Two #250 (t = 0.8) (Faston 6.5 Two #110 (t = 0.5) (Faston tab or equivalent) 4 – 2 Load power tab or equivalent)* supply 7.1 7.95 2.9 11.5 max. 6 3 Mounting Holes * G3NE-2��T(L)-2-US: Two, #187 (t=0.5) (Faston tab or equivalent) Two, 3.5-dia. or M3 holes 30±0.2 Heat Sink Mounting Holes Y92B-N50 Two, M3 holes 4.6 dia. hole Two, 3.2-dia. Two, M4 holes holes 44 max. 30 47 max. 35 30.5±0.3 90±0.4 Two, 4.4-dia. or M4 holes 47.6 5.6 5 4.5 6 77 max. 51 max. 90±0.3 Weight: approx. 200 g 100 max. 35±0.2 Y92B-N100 Two, M4 Two, M3 holes Two, 3.2-dia. holes 4.6 dia. hole holes Mounting Holes 71 max. 35 30.5±0.3 30 75 max. 90±0.4 Two, 4.4-dia. or M4 holes 47.6 5 4.5 5.6 28 13 100 max. 77 max. 90±0.3 100 max. Weight: approx. 400 g 35±0.2 178 Inrush current (A. Peak) Inrush current (A. Peak) Inrush current (A. Peak) G3NE G3NE Precautions Refer to pages 11 to 19 for general precautions + R Although the LOAD terminals are internally connected to a snubber circuit that absorbs noises, do not wire power lines or high-tension SSR C Input lines with the load connecting lines of the G3NE in the same conduit or the G3NE may be damaged or malfunction. – Because the operation time of the G3NE is extremely short, take measures to suppress noise induced between the INPUT terminals. Do not apply excessive force to the terminals. Exercise care when If generation of strong noise is expected, connect an external noise absorber such as an RC circuit. pulling or inserting the terminal clips. When attaching a heat sink to the G3NE, apply heat conductive grease on the heat sink. Tighten the mounting screws of the heat sink with a torque of 0.59 to 0.98 N � m. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. K062-E1-2A 179