D2JW Sealed Subminiature Basic Switch Ultra-small and Highly Sealed ● Degree of protection conforms to JIS Waterproof standard and IEC IP67. (Excluding the terminals on terminal models) ● Wide range of operating temperatures from −40°C to +85°C. D 2 ● Gold-alloy crossbar contact and coil spring offer J long durability and high contact reliability. W RoHS Compliant Model Number Legend D2JW-01 1 2 3 @@@ 1. Actuator 2. Contact form None : Pin plunger 1: SPDT K1A : Short hinge lever 2: SPST-NC (Molded lead wire models only) K1 : Hinge lever 3: SPST-NO (Molded lead wire models only) K2 : Hinge roller Lever 3. Terminals K3 : Simulated roller hinge lever None : Solder terminals -MD : Molded lead wires List of Models Actuator Terminals Contact form Model Solder terminals SPDT D2JW-011 SPDT D2JW-011-MD Pin plunger Molded lead SPST-NC D2JW-012-MD wires SPST-NO D2JW-013-MD Solder terminals SPDT D2JW-01K1A1 SPDT D2JW-01K1A1-MD Short hinge lever Molded lead SPST-NC D2JW-01K1A2-MD wires SPST-NO D2JW-01K1A3-MD Solder terminals SPDT D2JW-01K11 SPDT D2JW-01K11-MD Hinge Lever Models Molded lead SPST-NC D2JW-01K12-MD wires SPST-NO D2JW-01K13-MD Solder terminals SPDT D2JW-01K21 SPDT D2JW-01K21-MD Hinge Roller Lever Molded lead Models SPST-NC D2JW-01K22-MD wires SPST-NO D2JW-01K23-MD Solder terminals SPDT D2JW-01K31 SPDT D2JW-01K31-MD Simulated Roller Hinge Molded lead Lever Models SPST-NC D2JW-01K32-MD wires SPST-NO D2JW-01K33-MD Contact form ●SPDT ●SPST-NC ●SPST-NO COM NO NC COM NC COM NO (Black) (Blue) (Red) (Black) (Red) (Black) (Blue) The color in parentheses indicates the color of the lead wire. 1 D2JW Sealed Subminiature Basic Switch Contact Specifications Characteristics 1 mm to 250 mm/s Specification Crossbar Permissible operating speed (for pin plunger models) Material Gold alloy Permissible Mechanical 240 operations/min Contact operating Gap (standard Electrical 30 operations/min 0.5 mm frequency value) 100 MΩ min. Insulation resistance NC 0.1A max. (at 500 VDC with insulation tester) Inrush current Contact Solder terminal models 100 mΩ max. NO 0.1A max. resistance Minimum applicable load (see Molded lead wire models 140 mΩ max. (initial value) 5 VDC 1 mA note) Between terminals of the same 600 VAC 50/60 Hz 1min polarity D Dielectric Between current-carrying metal 1,000 VAC 50/60 Hz 1min Ratings strength * 1 parts and ground 2 Between each terminal and J 1,000 VAC 50/60 Hz 1min non-current-carrying metal parts W Rated voltage Resistive load Vibration 10 to 55 Hz, 1.5 mm double Malfunction 30 VDC 0.1A resistance * 2 amplitude 2 Shock Durability 1,000 m/s {approx. 100G} max. Note. The above rating values apply under the following test conditions. 2 resistance Malfunction * 2 200 m/s {approx. 20G} max. (1) Ambient temperature: 20±2°C 1,000,000 operations min. (2) Ambient humidity: 65±5% Mechanical (60 operations/min) (3) Operating frequency: 30 operations/min Durability * 3 100,000 operations min. Electrical (30 operations/min) IEC IP67 (excluding the terminals Degree of Solder terminal models on terminal models) protection Molded lead wire models IEC IP67 −40°C to +85°C (at ambient Ambient operating temperature humidity of 60% max.) (with no icing or condensation) Ambient operating humidity 35% to 98% (for +5°C to +35°C) Approx. 0.6g (for pin plunger Weight models with terminals) Note. The data given above are initial values. *1. The dielectric strength values shown apply for use with Separator (refer to page 4). *2. For the pin plunger models, the above values apply for use at the free position and total travel position. For the lever models, they apply at the total travel position. Close or open circuit of the contact is 1ms max. *3. For testing conditions, consult your OMRON sales representative. Mounting Holes (Unit: mm) M2.3 mounting screw hole ±0.1 4.8 Dimensions (Unit: mm) /Operating Characteristics Dimensions and operating characteristics of other actuator models for lead wire models are omitted in the illustration below, as the dimensions other than the termial part and operatiing characteristics is common with Solder terminal models. ●Pin plunger models 1.6 dia. PT D2JW-011 A Operating characteristics Operating Force OF Max. 2.45 N {250 gf} OP Releasing Force RF Min. 0.98 N {100 gf} 9.4 12.3 Pretravel PT Max. 0.6 mm 2.8 Overtravel OT Min. 0.3 mm +0.05 2.35 −0.025 1.3 Movement Differential MD Max. 0.1 mm 0.5 0.4 +0.05 1 2.35 dia. Operating Position OP 8.1±0.3 mm −0.025 +0.05 2.5 dia. 2 −0.025 ±0.1 5.3 3.95 4.8±0.05 3.95 3.95 12.7 1.8 7.95 ●Short hinge lever models t0.3 Stainless-steel PT A lever D2JW-01K1A1 R11.5 3 Operating Force OF Max. 1.15 N {117 gf} OP Releasing Force RF Min. 0.23 N {23 gf} 6.15 9.4 Pretravel PT Max. 5.4 mm 12.3 Overtravel OT Min. 0.7 mm 2.8 Movement Differential MD Max. 0.5 mm +0.05 2.35 −0.025 1.3 Operating Position OP 8.4±0.8 mm 0.5 0.4 +0.05 1 2.35 dia. −0.025 +0.05 2.5 dia. 2 −0.025 ±0.1 5.3 ±0.05 4.8 3.95 3.95 3.95 12.7 Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note 2. The operating characteristics are for operation in the A direction ( ). 2 D2JW Sealed Subminiature Basic Switch ●Hinge lever models 7.95 1.8 D2JW-01K11 A PT t0.3 Stainless-steel R16.5 lever 3 Operating Force OF Max. 0.80 N {82 gf} OP Releasing Force RF Min. 0.15 N {16 gf} 6.15 9.4 Pretravel PT Max. 6.4 mm 12.3 2.8 Overtravel OT Min. 1.4 mm +0.05 Movement Differential MD Max. 0.7 mm 2.35 1.3 −0.025 Operating Position OP 8.4±0.8 mm 0.5 0.4 +0.05 1 2.35 dia. −0.025 +0.05 2.5 dia. 2 −0.025 ±0.1 5.3 D 4.8±0.05 3.95 2 3.95 3.95 J 12.7 W ●Simulated roller lever hinge models D2JW-01K31 PT 1.8 7.95 5.35 t0.3 Stainless-steel 1.3 1.9 3 lever R1.3 A Operating Force OF Max. 0.95 N {97 gf} OP Releasing Force RF Min. 0.19 N {20 gf} 6.15 9.4 Pretravel PT Max. 5.5 mm 12.3 Overtravel OT Min. 1.1 mm 2.8 Movement Differential MD Max. 0.6 mm +0.05 2.35 −0.025 1.3 Operating Position OP 10.3±0.8mm 0.5 0.4 +0.05 1 2.35 dia. −0.025 +0.05 2 2.5 dia. −0.025 5.3±0.1 ±0.05 3.95 4.8 3.95 3.95 12.7 ●Hinge roller lever models 7.95 1.8 4.8×2.2 dia. D2JW-01K21 Polyacetal resin roller PT A R13.5 OP Operating Force OF Max. 0.98 N {100 gf} 6.15 Releasing Force RF Min. 0.19 N {20 gf} 9.4 12.3 Pretravel PT Max. 5.2 mm 2.8 Overtravel OT Min. 1.1 mm +0.05 2.35 −0.025 1.3 Movement Differential MD Max. 0.5 mm 0.5 0.4 Operating Position OP 14.6±0.8 mm +0.05 1 2.35 dia. −0.025 +0.05 2.5 dia. 2 −0.025 ±0.1 5.3 ±0.05 4.8 3.95 3.95 3.95 12.7 ●Molded lead wire models 1.6 dia. D2JW-01@@@-MD PT A + 0.05 2.35 dia. −0.025 +0.05 2.35 − 0.025 OP Operating Force OF Max. 2.45 N {250 gf} Releasing Force RF Min. 0.98 N {100 gf} 15.3 Pretravel PT Max. 0.6 mm +0.05 2.5 dia. 8.7 − Overtravel OT Min. 0.3 mm 0.025 3.95 4.8±0.05 Movement Differential MD Max. 0.1 mm Operating Position OP 8.1±0.3 mm AVS 0.3 ±10 300 ±2 5 Note. When ordering, replace @ with the code COM NO NC for the actuator and contact form that (Black) (Blue) (Red) 5.3±0.1 you need. 12.7 Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note 2. The operating characteristics are for operation in the A direction ( ). 3 D2JW Sealed Subminiature Basic Switch Precautions ★Please refer to "Basic Switches Common Precautions" for correct use. Cautions Correct Use ●Terminal Connection ●Mounting Before soldering the lead wire to the terminal, first insert the lead Use M2.3 mounting screw with plane washers or spring washers wire conductor through the terminal hole. to securely mount the Switch. Tighten the screws to a torque of Complete the soldering at the iron tip temperature till 250°C 0.20 to 0.29 N·m {2 to 3 kgf·cm}. within 3 seconds, and do not apply any external force for 1 ●Wiring Molded Lead Wire Models D minute after soldering. Soldering at an excessively high 2 When wiring molded lead wire models, ensure that there is no temperature or soldering for more than 3 seconds may J weight applied on the wire and that the wire is not bent. deteriorate the characteristics of the Switch. W Otherwise, damage to the Switch or deterioration in the sealing ●Degree of Protection may result. • The Switch was tested and found to meet the conditions necessary to meet the following standard given below. The ●Using Micro Loads test checks for water intrusion after immersion for a specified Even when using micro load models within the operating range time period, not for switching operation underwater. shown below, if inrush/surge current occurs, it may increase the JIS C0920: contact wear and so decrease durability. Therefore, insert a Degrees of protection provided by enclosures of electrical contact protection circuit where necessary. apparatus (IP Code) IEC 60529: Degrees of protection provided by enclosures (IP Code) Degree of protection: IP67 (check water intrusion after immersion for 30 min. submerged 1m underwater) ●Protection Against Chemicals Prevent the Switch from coming into contact with oil or chemicals. Otherwise, damage to or deterioration of Switch materials may result. Separator (sold separately) SEPARATOR FOR D2JW ±0.1 2-2.4 dia. 10.4 5.2 4.8±0.1 3.6 12 t=0.18 Note. The material of the separator is EAVTC (epoxy alkyd/varnish tetron cloth). Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation Electronic and Mechanical Components Company Contact: www.omron.com/ecb Cat. No. B040-E1-05 0417(0207)(O) 4