D2RV Miniature Basic Switch High Reliability for Micro Load Applications, Even in Adverse Atmospheres (Dust, High Humidity, Silicon Gas, etc.) D ● The reed switch offers exceptional contact 2 reliability in micro load applications. R V ● Same mounting pitch as for the V Miniature Basic Switch. ● High durability with a bounce time of 1 ms max. RoHS Compliant Model Number Legend Contact Form ●SPST-NO 12 D2RV- @@ Reed switch 1. Actuator NO None : Pin plunger model COM L11 : Short hinge lever L : Hinge lever Ratings L13 : Simulated roller lever L22 : Short hinge roller lever Switching voltage 100 VDC (max.) Switching current 0.25 ADC (max.) L2 : Hinge roller lever Contact capacity 10 WDC (max.) 2. Maximum Operating Force (OF) Note. The above rating values apply under the following test conditions. None : 0.49 N {50 gf} (1) Ambient temperature: 20±2°C (2) Ambient humidity: 65±5% E : 0.25 N {25 gf} (3) Operating frequency: 30 operations/min (for pin plungers only) G : 0.98 N {100 gf} Characteristics Note. These values are for the pin plunger models. Permissible operating speed 0.1mm to 1 m/s (for pin plunger models) List of Models Permissible Mechanical 200 operations/min operating Electrical 200 operations/min frequency Maximum Insulation resistance 100 MΩ min. (at 500 VDC with insulation tester) Operating Model Actuator Force (OF) Contact resistance (initial value) 150 mΩ max. Pin 0.25 N {25 gf} D2RV-E Between terminals of 200 VDC 1 min plunger 0.49 N {50 gf} D2RV the same polarity Between current- 0.98 N {100 gf} D2RV-G Dielectric carrying metal parts and 500 VAC 50/60 Hz for 1 min Short hinge 0.49 N {50 gf} D2RV-L11 strength * 1 ground lever 0.98 N {100 gf} D2RV-L11G Between each terminal Hinge lever 0.25 N {25 gf} D2RV-L and non-current- 500 VAC 50/60 Hz for 1 min 0.49 N {50 gf} D2RV-LG carrying metal parts Simulated 0.25 N {25 gf} D2RV-L13 Vibration Malfunction 10 to 55 Hz, 1.5 mm double amplitude roller lever resistance * 2 0.49 N {50 gf} D2RV-L13G 2 Destruction 500 m/s {approx. 50G} max. Shock Short hinge 0.49 N {50 gf} D2RV-L22 2 resistance Malfunction * 2 200 m/s {approx. 20G} max. roller lever Mechanical 10,000,000 operations min. (60 operations/min) 0.98 N {100 gf} D2RV-L22G Durability * 3 Electrical 3,000,000 operations min. (30 operations/min) Hinge roller 0.25 N {25 gf} D2RV-L2 Degree of protection IEC IP40 lever 0.49 N {50 gf} D2RV-L2G –10°C to +60°C (at ambient humidity of 60% max.) Ambient operating temperature (with no icing or condensation) Ambient operating humidity 80% max. (for +5°C to +35°C) Weight Approx. 7g (for pin plunger models) Note. The data given above are initial values. *1. The values for dielectric strength shown are for models with a Separator (refer to "Basic Switch Common Accessories"). *2. For the pin plunger models, the above values apply for use at the free position and total travel position. For the lever models, they apply at the total travel position. Close or open circuit of the contact is 1ms max. *3. For testing conditions, consult your OMRON sales representative. Separator (Sold Separately), Actuator (Sold Separately), Terminal Connector (Sold Separately) Refer to "Basic Switch Common Accessories" 1 D2RV Miniature Basic Switch Terminals/Appearances (Unit:mm) Mounting Holes (Unit: mm) 6.3 2-3.1 dia. mounting holes t=0.5 or M3 screw holes 3.2 2-Solder terminals 4.8 ±0.1 10.3 2.4 dia. 1.3 dia. ±0.1 22.2 15.9 5.4 D 1 2 (10) R V Dimensions (Unit: mm) /Operating Characteristics ●Pin Plunger A D2RV-E 5.15 ±0.25 Model 20.2 +0.13 R1.5 Operating D2RV-E D2RV D2RV-G D2RV PT 2.8 3.1 dia. holes −0.03 4.3 characteristics D2RV-G 0.25 N 0.49 N 0.98 N Operating Force OF Max. OP 10.3±0.1 15.9 {25 gf} {50 gf} {100 gf} 5.4 Pretravel PT Max. 1.6 mm 2.8 Overtravel OT Min. 0.6 mm +0.13 ±0.15 3.1 3.4 dia. 10.3 −0.03 Movement Differential MD Max. 0.8 mm ±0.1 22.2 1 2.8 27.8 Operating Position OP 14.4±0.6 mm (10) ●Short Hinge Lever D2RV-L11 5.15 Model 22.1 8.1 D2RV-L11G A +0.13 PT 3.1 dia. holes Operating D2RV-L11 D2RV-L11G t=0.5 * −0.03 4.3 characteristics 0.49 N 0.98 N OP Operating Force OF Max. ±0.1 {50 gf} {100 gf} 10.3 15.9 5.4 Pretravel PT Max. 1.8 mm 2.8 Overtravel OT Min. 0.4 mm +0.13 3.1 ±0.15 dia. 3.4 10.3 −0.03 Movement Differential MD Max. 1.0 mm 22.2±0.1 1 2.8 27.8 Operating Position OP 15.0±0.6 mm * Stainless-steel lever (10) ●Hinge Lever Models D2RV-L 5.15 ±0.8 Model 35.6 A PT 8.1 D2RV-LG +0.13 t=0.5 * 3.1 dia. holes Operating D2RV-L D2RV-LG −0.03 4.3 characteristics 0.25 N 0.49 N OP Operating Force OF Max. ±0.1 10.3 15.9 {25 gf} {50 gf} 5.4 Pretravel PT Max. 4.0 mm 2.8 +0.13 Overtravel OT Min. 1.0 mm ±0.15 dia. 3.1 3.4 10.3 −0.03 Movement Differential MD Max. 1.6 mm ±0.1 22.2 1 2.8 27.8 * Stainless-steel lever Operating Position OP 14.4±1.2 mm (10) ●Simulated Roller Lever Models D2RV-L13 R3.5 t=0.5 * 5.15 Model D2RV-L13G PT A ±0.8 32.6 Operating D2RV-L13 D2RV-L13G 8.1 4.3 +0.13 characteristics 3.1 dia. holes −0.03 0.25 N 0.49 N Operating Force OF Max. {25 gf} {50 gf} OP ±0.1 10.3 15.9 Pretravel PT Max. 4.0 mm 5.4 Overtravel OT Min. 1.0 mm 2.8 Movement Differential MD Max. 1.6 mm +0.13 ±0.15 dia. 3.1 3.4 10.3 −0.03 ±0.1 Operating Position OP 18.1±1.2 mm 22.2 1 2.8 27.8 * Stainless-steel lever (10) Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note 2. The operating characteristics are for operation in the A direction ( ). 2 D2RV Miniature Basic Switch ●Short Hinge Roller Lever Models D2RV-L22 t=0.5 *1 4.8 dia.×4.8 *2 Model 5.15 D2RV-L22G PT 20.1 Operating D2RV-L22 D2RV-L22G A 8.1 +0.13 3.1 dia. holes characteristics −0.03 0.49 N 0.98 N Operating Force OF Max. OP {50 gf} {100 gf} ±0.1 10.3 15.9 5.4 Pretravel PT Max. 1.8 mm Overtravel OT Min. 0.4 mm 2.8 +0.13 Movement Differential MD Max. 1.0 mm ±0.15 dia. 3.1 3.4 10.3 −0.03 ±0.1 22.2 1 Operating Position OP 20.4±0.6 mm 2.8 *1. Stainless-steel lever D 27.8 (10) *2. Polyacetal resin roller 2 R V ●Hinge Roller Lever Models D2RV-L2 t=0.5 *1 4.8 dia.×4.8 *2 Model A PT ±0.8 34 D2RV-L2G 5.15 Operating D2RV-L2 D2RV-L2G 8.1 +0.13 characteristics 3.1 dia. holes −0.03 0.25 N 0.49 N Operating Force OF Max. OP {25 gf} {50 gf} ±0.1 10.3 15.9 5.4 Pretravel PT Max. 4.0 mm Overtravel OT Min. 1.0 mm 2.8 Movement Differential MD Max. 1.6 mm +0.13 ±0.15 3.1 3.4 dia. 10.3 −0.03 ±0.1 22.2 1 Operating Position OP 19.9±1.2 mm 2.8 *1. Stainless-steel lever 27.8 (10) *2. Polyacetal resin roller Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note 2. The operating characteristics are for operation in the A direction ( ). Precautions ★Please refer to "Basic Switches Common Precautions" for correct use. Cautions Correct Use ●Handling ●Effect of the External Magnetic Fields Do not drop the Switch or apply strong shock. It may result in If two or more switch units are closely installed, mutual internal mechanism damages and may deteriorate the interference due to the fringing field will occur, resulting in characteristics of the inner Reed Switch. malfunction. Be sure to keep the gap between the switch units 8 mm or more. ●Effect of the External Vibration If you install the switch unit on the iron plate, each operating characteristic will change. Therefore, confirm that the interval When a vibration of 1 kHz or higher is applied, note that false between the switch units should be 2 mm or more. switching operations may occur due to resonant frequency, even Do not use the switch in some area where a strong external with a low acceleration. magnetic field would be applied, otherwise malfunction will be caused. ●Soldering Use nonmagnetic brass or stainless steel (SUS304 alloy) Terminal connections screws for installation. Do not use any iron screw. Complete the soldering at the iron tip temperature between 250 to 350°C (60W) within 5 seconds, and do not apply any external force for 1 minute after soldering. Apply minimum amount of flux required. It may result in contact failure once the flux penetrates into the internal part of the Switch. 3 D2RV Miniature Basic Switch D 2 R V Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation ELECTRONIC AND MECHANICAL COMPONENTS COMPANY Contact: www.omron.com/ecb Cat. No. B056-E1-04 0812(0207)(O) 4