Solid-state Relay G3R-I/O Compact SSRs for I/O Interface with High Dielectric Strength Requirements High-speed models with optimum input ratings for a variety of sensors are available. Input Modules and Output Modules that can be used for the G2R are available. Using a coupler approved by VDE 0884 and assuring an I/O dielectric strength of 4 kV. Incorporating an easy-to-see monitoring indicator. Approved by UL, CSA, and TÜV with -UTU Version. RCE Ordering Information Input Module Isolation Indicator Response speed Logic level Rated input Model Supply voltage Supply current voltage Photocoupler Yes --- 4 to 32 VDC 0.1 to 100 mA 100 to 240 VAC G3R-IAZR1SN High-speed g s eed 5 VDC G3R-IDZR1SN (1 (1 kHz) kH ) 12 to 24 VDC Low-speed o s eed 5 VDC G3R-IDZR1SN-1 (10 (10 Hz) H ) 12 to 24 VDC Output Module Isolation Indicator Zero cross Applicable output Rated input Model function load Phototriac Yes Yes 2 A at 75 to 264 VAC 5 to 24 VDC G3R-OA202SZN No G3R-OA202SLN Photocoupler --- 2 A at 4 to 60 VDC G3R-ODX02SN 1.5 A at 40 to 200 G3R-OD201SN VDC Note: When ordering a TÜV approved model, add “-UTU” to the model number as shown below: Example: G3R-OA202SZN-UTU. Accessories (Order Separately) Track/Surface Mounting Sockets Model Number of poles P2RF-05-E 1 pole (G2R: 1 pole usage) Connecting Socket Attaching Plate Model Applicable Socket P2R-P P2R-05A 204 G3R-I/O G3R-I/O I/O Indication I/O module classification and AC/DC use are indicated on the mark affixed to the top of the product. Mark indication Specification AC IN Input module, AC input DC IN Input module, DC input AC OUT Output module, AC output DC OUT Output module, DC output Mark attached to the top of the product Specifications Ratings Input Module Input Model Rated voltage Operating voltage Input current Must operate Must release voltage voltage G3R-IAZR1SN 100 to 240 VAC 60 to 264 VAC 15 mA max. 60 VAC max. 20 VAC min. G3R-IDZR1SN 5 VDC 4 to 6 VDC 8 mA max. 4 VDC max. 1 VDC min. 12 to 24 VDC 6.6 to 32 VDC 6.6 VDC max. 3.6 VDC min. G3R-IDZR1SN-1 5 VDC 4 to 6 VDC 4 VDC max. 1 VDC min. 12 to 24 VDC 6.6 to 32 VDC 6.6 VDC max. 3.6 VDC min. Output Model Logic level supply voltage Logic level supply current G3R-IAZR1SN 4 to 32 VDC 0.1 to 100 mA G3R-IDZR1SN G3R-IDZR1SN-1 Output Module Input Model Rated voltage Operating voltage Input current Must operate Must release voltage voltage 15 mA max. 5a G3R-OA202SZN 5 to 24 VDC 4 to 32 VDC 4 VDC max. 1 VDC min. (t (at 25 25° °C) C) G3R-OA202SLN G3R-ODX02SN 8 mA max. G3R-OD201SN Output Model Load voltage Load current (see note) Inrush current G3R-OA202SZN 75 to 264 VAC 0.05 to 2 A 30 A (60 Hz, 1 cycle) G3R-OA202SLN G3R-ODX02SN 4 to 60 VDC 0.01 to 2 A 8 A (10 ms) G3R-OD201SN 40 to 200 VDC 0.01 to 1.5 A 8 A (10 ms) Note: The minimum current value is measured at 10°C min. 205 G3R-I/O G3R-I/O Characteristics Input Module Item G3R-IAZR1SN G3R-IDZR1SN G3R-IDZR1SN-1 Operate time 20 ms max. 0.1 ms max. 15 ms max. Release time 20 ms max. 0.1 ms max. 15 ms max. Response frequency 10 Hz 1 kHz 10 Hz Output ON voltage drop 1.6 V max. Leakage current 5 μA max. Insulation resistance 100 MΩ min. between input and output Dielectric strength 4,000 VAC, 50/60 Hz for 1 min between input and output Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude 2 Shock resistance 1,000 m/s Ambient temperature Operating: –30°C to 80°C (with no icing) Storage: –30°C to 100°C (with no icing) Approved standards UL508 File No. E64562 CSA C22.2 (No. 14, No. 950) File No. LR35535 TÜV File No. R9650094 (EN60950) Ambient humidity Operating: 45% to 85% Weight Approx. 18 g Output Module Item G3R-OA202SZN G3R-OA202SLN G3R-ODX025N G3R-OA201SN Operate time 1/2 of load power source cycle + 1 ms max. 1 ms max. Release time 1/2 of load power source cycle + 1 ms max. 2 ms max. Response frequency 20 Hz 100 kHz Output ON voltage drop 1.6 V max. 2.5 V max. Leakage current 1.5 mA max. 1 mA max. Insulation resistance 100 MΩ min. between input and output Dielectric strength 4,000 VAC, 50/60 Hz for 1 min between input and output Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude 2 Shock resistance 1,000 m/s Ambient temperature Operating: –30°C to 80°C (with no icing) Storage: –30°C to 100°C (with no icing) Approved standards UL508 File No. E64562 CSA C22.2 (No. 14, No. 950) File No. LR35535 TÜV File No. R9650094 (EN60950) Ambient humidity Operating: 45% to 85% Weight Approx. 18 g 206 G3R-I/O G3R-I/O Engineering Data Load Current vs. Ambient Temperature Characteristics G3R-OA202SZN/OA202SLN G3R-ODX02SN (4 to 60 VDC) G3R-OD201SN (40 to 200 VAC) 4-point mounting (see note 1) 4-point mounting (see note 1) 2 2 2 4-point mounting (see note 1) 16-point mounting (see note 2) 16-point mounting (see note 2) 1.5 1.5 1.5 1.4 1.4 Single-point Single-point mounting mounting 1.1 Single-point 1 1 1 mounting 16-point mounting 0.7 (see note 2) 0.6 0.5 0.5 0.5 –30 –20 0 20 30 40 55 60 80 100 –30 –20 0 20 40 55 60 80 100 –30 –20 0 20 40 55 60 80 100 Ambient temperature (°C) Ambient temperature (°C) Ambient temperature (°C) Note: 1. When G730-Z0M04-B is mounted. 2. When G70A-Z0C16 is mounted. Inrush Current Resistivity Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.) G3R-OA202SZN/OA202SLN G3R-ODX02SN G3R-OD201SN 10 10 9 9 30 8 8 7 7 6 6 20 5 5 4 4 3 3 10 2 2 1 1 0 0 10 30 50 100 200 500 1000 5000 10 30 50 100 300 500 1000 2000 10 30 50 100 300 500 1000 2000 Energizing time (ms) Energizing time (ms) Energizing time (ms) Operation Precaution of Mounting Output Modules With up to four G3R SSRs mounted closely and With a G3R SSRs mounted every other slot, side by side, 2-A loads can be switched. 2-A loads can be switched. ÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉÉ G3R G3R G3R 207 Inrush current (A) Load current (A) Inrush current (A) Load current (A) Inrush current (A) Load current (A) G3R-I/O G3R-I/O Dimensions Note: All units are in millimeters unless otherwise indicated. G3R Terminal Arrangement/ 1 Internal Connections 5.2 (Bottom View) 3 3 4 0.5 (+) 9.6 29 max. (–) 17.4 4 4.75 Load 15 13 max. 5 7.5 28 max. 4.7 0.5 4.75 Input 4 1 5 10 (–) (+) 2 20 Connecting Sockets Connecting Socket Attaching Plates P2RF-05 G3RZ Relay 4 dia. 4.2-dia. hole 71.5 max. P2RF-05 Socket 58.5 * M3 (M3 x16) or 3.2-dia. hole 19.5 max. 30 max. 54 max. * Indicates a value when using the PFP-�N Supporting Rail. The value is 67.5 when using the PFP-�N2. G3RZ Relay 59 max. M3.5 screw P2RF-05-E 48 max. PFRF-05-E Socket 3.2-dia. hole 3.5-dia. 62.5 ** hole (66.5)*** 85.5 max. ** Indicates a value when using the PFP-�N M3 or 3.5-dia. hole Supporting Rail with the P2RF-05-E The value is 71.5 when using the PFP-�N2. *** Indicates a value when using the PFP-�N 61 max. Supporting Rail with the P2RF-08-E The value is 75.5 when using the PFP-�N2. P2R-05A 14.5 max. G3RZ Relay 35.5 max. P2R-05A Socket Five, 3x1.5-dia. hole (Panel thickness must be 1.6 to 2.0 mm.) 36 max. 208 G3R-I/O G3R-I/O 14.5 max. P2R-05P Five, 1.6-dia. hole G3RZ Relay 35.5 max. P2R-05P Socket Dimensional tolerance is ±0.1. 36 max. 14 max. Five, 1.6-dia. hole P2R-057P G3RZ Relay 32 max. P2R-057P Socket 41 max. Socket Mounting Plate Use the Socket Mounting Plate when arranging several Sockets in a row. R2.25 10 ellipses Square hole 209 G3R-I/O G3R-I/O G70A I/O Block Base Ordering Information Classification Internal I/O circuit common Rated voltage Model Output NPN (+ common) 24 VDC G70A-ZOC16-3 PNP (– common) 24 VDC G70A-ZOC16-4 Input NPN/PNP 110 VDC max., 240 VAC max. G70A-ZIM16-5 (see note) Note: Each relay to be mounted must incorporate a coil that has proper specifications within the maximum rated voltage range. Dimensions Note: All units are in millimeters unless otherwise indicated. G70A-ZOC16 (Output) 234 64 +0.2 75 35.3 –0 28.6 9.2 19.6 M3.5 20.7 34.2 48.7 G70A-ZIM16 (Input) 234 48.7 10.2 +0.2 35.3 –0 75 9.2 19.6 M3.5 20.7 34.2 54 210 G3R-I/O G3R-I/O Installation Terminal Arrangement/Internal Connection G70A-ZOC16-3 (NPN) – – + + Connector Terminal Arrangement (Top View) G70A-ZOC16-4 (PNP) – – + + Connector Terminal Arrangement (Top View) 211 G3R-I/O G3R-I/O G70A-ZIM16-5 (NPN/PNP) 1A1 2A1 3A1 4A1 5A1 6A1 7A1 8A1 9A1 10A1 11A1 12A1 13A1 14A1 15A1 16A1 – – 1A2 2A2 3A2 4A2 5A2 6A2 7A2 8A2 9A2 10A2 11A2 12A2 13A2 14A2 15A2 16A2 + + COM. Connector Terminal Arrangement (Top View) Precautions Refer to pages 11 to 19 for general precautions. Protective Element Since the SSR does not incorporate an overvoltage absorption Connection component, be sure to connect an overvoltage absorption compo- With the SSR for DC switching, the load can be connected to either nent when using the SSR under an inductive load. positive or negative output terminal of the SSR. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. K091-E1-1A 212