Output Input Output Input DIP G3VM-61AR/DR G3VM-61AR/DR MOS FET Relays Higher power, 2-A switching with a 60-V load voltage, DIP package. Low 80 mΩ ON Resistance. • Continuous load current of 2 A.  Switches minute analog signals.  Dielectric strength of 2,500 Vrms between I/O. RoHS compliant Note: The actual product is marked differently from the image shown here. ■Application Examples ■ Terminal Arrangement/Internal Connections 43  Communication equipment Mold pin mark ∗ OMRON logo  Test & Measurement equipment Model name Pin 1 mark 932 LOT No.  Security equipment  Factory Automation equipment 12  Power circuit Note: The actual product is marked differently from the image shown here. ∗ The indentation in the corner diagonally opposite from the pin 1 mark is from a pin on the mold. ■ List of Models Minimum package quantity Load voltage Package type Contact form Terminals Model (peak value) * Number per stick Number per tape and reel PCB terminals G3VM-61AR 100 --- 1a DIP4 60 V G3VM-61DR (SPST-NO) Surface-mounting terminals G3VM-61DR (TR) --- 1,500 * The AC peak and DC value are given for the load voltage. ■Absolute Maximum Ratings (Ta = 25°C) Item Symbol Rating Unit Measurement conditions LED forward current IF 30 mA Repetitive peak LED forward current IFP 1 A 100 µs pulses, 100 pps LED forward current reduction rate ∆IF/°C −0.3 mA/°C Ta ≥ 25°C LED reverse voltage VR 5 V Connection temperature TJ 125 °C Load voltage (AC peak/DC) VOFF 60 V Continuous load current (AC peak/DC) IO 2A ON current reduction rate ∆IO/°C −20 mA/°C Ta ≥ 25°C Pulse ON current Iop 6 A t = 100 ms, Duty = 1/10 Connection temperature TJ 125 °C Dielectric strength between I/O (See note 1.) VI-O 2500 Vrms AC for 1 min Note: 1. The dielectric strength between the input and Operating temperature Ta −40 to +85 °C With no icing or condensation output was checked by applying voltage Storage temperature Tstg −55 to +125 °C With no icing or condensation between all pins as a group on the LED side and Soldering temperature --- 260 °C 10 s all pins as a group on the light-receiving side. ■Electrical Characteristics (Ta = 25°C) Item Symbol Minimum Typical Maximum Unit Measurement conditions LED forward voltage VF 1.18 1.33 1.48 V IF = 10 mA Note: 2. Turn-ON and Turn-OFF Times Reverse current IR --- --- 10 µA VR = 5 V IF 1 4 RL Capacity between terminals CT --- 70 --- pF V = 0, f = 1 MHz VDD VOUT Trigger LED forward current IFT --- 0.5 3 mA IO = 1 A 2 3 Maximum resistance with output ON RON --- 80 200 mΩ IF = 5 mA, IO = 2 A, t < 1s Current leakage when the relay is open ILEAK --- --- 1.0 µA VOFF = 60 V Capacity between terminals COFF --- 250 --- pF V = 0, f = 1 MHz IF Capacity between I/O terminals CI-O --- 0.8 --- pF f = 1 MHz, VS = 0 V Insulation resistance between I/O terminals RI-O 1000 --- --- MΩ VI-O = 500 VDC, ROH ≤ 60% 90% VOUT Turn-ON time tON --- 0.8 5 ms IF = 5 mA, RL = 200 Ω, 10% t ON t OFF VDD = 20 V (See note 2.) Turn-OFF time tOFF --- 0.3 1 ms 1 DIP G3VM-61AR/DR G3VM-61AR/DR MOS FET Relays ■Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage VDD --- --- 48 V (AC peak/DC) Operating LED forward current IF 510 25 mA Continuous load current IO --- --- 2 A (AC peak/DC) Operating temperature Ta −20 --- 65 °C ■Engineering Data LED forward current vs. Continuous load current vs. LED forward current vs. Ambient temperature Ambient temperature LED forward voltage I - Ta I - Ta I - V F O F F 50 3 100 Ta = 25°C 40 10 2 30 1 20 1 0.1 10 0 0 0.01 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 0 0.5 1 1.5 2 Ambient temperature Ta (°C) Ambient temperature Ta (°C) LED forward voltage VF (V) Continuous load current vs. On-state resistance vs. Trigger LED forward current vs. On-state voltage Ambient temperature Ambient temperature I - V R - Ta I - Ta O ON ON FT 3 150 2 Ta = 25°C I = 2A O I = 1A O I = 5mA F I = 5mA, t < 1s F t < 1s 2 100 1 0 1 -1 50 -2 -3 0 0 -0.2 -0.1 0 0.1 0.2 -40 -20 0 20406080 100 -40 -20 0 20406080 100 On-state voltage VON (V) Ambient temperature Ta (°C) Ambient temperature Ta (°C) Turn ON, Turn OFF time vs. Turn ON, Turn OFF time vs. Current leakage vs. LED forward current Ambient temperature Ambient temperature t , t - I t , t - Ta I - Ta ON OFF F ON OFF LEAK 100 100 100 V = 20V V = 20V DD DD V = 60V OFF R = 200Ω R = 200Ω L L Ta = 25°C I = 5mA F 10 10 10 t on 1 1 1 t off t off 0.1 0.1 0.1 t on 0.01 0.01 0.01 1 10 100 -40 -20 0 20406080 100 -40 -20 0 20 40 60 80 100 LED forward current IF (mA) Ambient temperature Ta (°C) Ambient temperature Ta (°C) ■Safety Precautions  Refer to "Common Precautions" for all G3VM models. 2 LED forward current IF (mA) Turn ON, Turn OFF time tON, tOFF (ms) Continuous load current IO (A) Turn ON, Turn OFF time tON, tOFF (ms) On-state resistance RON (mΩ) Continuous load current IO (A) Current leakage ILEAK (nA) Trigger LED forward current IFT (mA) LED forward current IF (mA) Appearance/Dimensions DIP4 ■Appearance DIP (Dual Inline P DIP (Dual Inline Pa ac ck ka ag ge) e) DIP4 Mold pin mark∗ OMRON logo Model name Pin 1 mark 932 LOT No. Note: The actual product is marked differently from the image shown here. ∗ The indentation in the corner diagonally opposite from the pin 1 mark is from a pin on the mold. ■Dimensions (Unit: mm) PCB Terminals Surface-mounting Terminals PCB Dimensions (Bottom View) Weight: 0.25 g Weight: 0.25 g Four, 0.8-dia. holes 2.54 (0.61) 2.54 ±0.25 4.58 4.58±0.25 (0.61) ±0.25 6.4 (1.52) (1.52) ±0.25 6.4 ±0.25 Actual Mounting Pad Dimensions 7.62 0.8±0.25 ±0.25 7.62 (Recommended Value, Top View) +0.15 3.65 −0.25 2.54 +0.15 +0.25 +0.1 3.65 4.0 −0.25 −0.2 0.25 −0.05 1.0 min. ±0.15 1.2 2.5 min. 1.2±0.15 8.3 to 8.8 7.85 to 8.80 1.0 min. ±0.1 0.5 10.0 max. ±0.25 2.54±0.25 2.54 1.3 Note: The actual product is marked differently from the 1.5 image shown here. • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. • Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation ELECTRONIC AND MECHANICAL COMPONENTS COMPANY Contact: www.omron.com/ecb Cat. No. K139-E1-02 0412(0412)(O)