G3VM-81GR1 MOS FET Relays MOS FET Relays Designed for Switching Minute Signals and Analog Signals. • Low Output Capacitance and ON Resistance (C × R = 32.5 pF • Ω) RoHS compliant Note: The actual product is marked differently from the image shown here. ■ Application Examples ■ Terminal Arrangement/Internal Connections • Semiconductor test equipment 43 • Test & Measurement equipment Mold pin mark * • Communication equipment OMRON logo Model name • Data loggers Pin 1 mark 932 LOT.No. 12 Note: The actual product is marked differently from the image shown here. * The indentation in the corner diagonally opposite from the pin 1 mark is from a pin on the mold. ■ List of Models Minimum package quantity Load voltage Package type Contact form Terminals Model (peak value) * Number per tube Number per tape and reel G3VM-81GR1 100 - 1a SOP4 Surface-mounting Terminals 80 V (SPST-NO) G3VM-81GR1 (TR) -2,500 * The AC peak and DC value are given for the load voltage. ■ Absolute Maximum Ratings (Ta = 25°C) Item Symbol Rating Unit Measurement conditions LED forward current IF 50 mA Repetitive peak LED forward current IFP 1 A 100 µs pulses, 100 pps LED forward current reduction rate ∆IF/°C −0.5 mA/°C Ta ≥ 25°C LED reverse voltage VR 5 V Connection temperature TJ 125 °C Load voltage (AC peak/DC) VOFF 80 V Continuous load current (AC peak/DC) IO 200 mA ON current reduction rate ∆IO/°C −2.0 mA/°CTa ≥ 25°C Connection temperature TJ 125 °C Dielectric strength between VI-O 1500 Vrms AC for 1 min I/O (See note 1.) Note: 1. The dielectric strength between the input and Ambient operating temperature Ta −20 to +85 °C With no icing or condensation output was checked by applying voltage Ambient storage temperature Tstg −40 to +125 °C With no icing or condensation between all pins as a group on the LED side and Soldering temperature -260 °C10 s all pins as a group on the light-receiving side. ■ Electrical Characteristics (Ta = 25°C) Item Symbol Minimum Typical Maximum Unit Measurement conditions LED forward voltage VF 1.0 1.15 1.3 V IF = 10 mA Note: 2. Turn-ON and Turn-OFF Times Reverse current IR - - 10 µA VR = 5 V IF 1 4 RL VDD Capacity between terminals CT - 15 - pF V = 0, f = 1 MHz VOUT 2 3 Trigger LED forward current IFT - - 3 mA IO = 200 mA Maximum resistance with output ON RON -5 8 Ω IF = 5 mA, IO = 200 mA Current leakage when the relay is open ILEAK -- 1 nA VOFF = 80 V, Ta = 50 °C Capacity between terminals COFF - 6.5 11 pF V = 0, f = 100 MHz, t < 10 s IF Capacity between I/O terminals CI-O - 0.7 - pF f = 1 MHz, VS = 0 V Insulation resistance between I/O terminals RI-O 1000 - - MΩ VI-O = 500 VDC, ROH ≤ 60 % 90% VOUT Turn-ON time tON -0.13 0.5 ms IF = 5 mA, RL = 200 Ω, 10% t ON t OFF VDD = 10 V (See note 2.) Turn-OFF time tOFF -0.17 0.5 ms 1 Output Input Output Input G3VM-81GR1 MOS FET Relays ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) VDD - - 64 V Operating LED forward current IF 5 - 30 mA Continuous load current (AC peak/DC) IO -- 200 mA Ambient operating temperature Ta 25 - 60 °C ■ Engineering Data LED forward current vs. Ambient temperature Continuous load current vs. Ambient temperature LED forward current vs. LED forward voltage IF - Ta IO - Ta IF - VF 100 500 100 50 Ta = 25 °C 30 80 400 10 60 300 5 3 200 40 1 0.5 100 20 0.3 0 0 0.1 -20 020 40 60 80 100 120 -20 020 40 60 80 100 120 0.6 0.8 1 1.2 1.4 1.6 1.8 Ambient temperature Ta (°C) Ambient temperature Ta (°C) LED forward voltage VF (V) Continuous load current vs. On-state voltage On-state resistance vs. Ambient temperature Trigger LED forward current vs. Ambient temperature IO - VON RON - Ta IFT - Ta 20 1.5 Ta = 25 °C IO = 200 mA IO = 200 mA 200 IF = 5 mA t < 1s IF = 5 mA, t < 1s 15 100 1.0 10 0 0.5 -100 5 -200 0 0 -20 020 40 60 80 100 -20 020 40 60 80 100 -1 -0.5 0 0.5 1 Ambient temperature Ta (°C) Ambient temperature Ta (°C) On-state voltage VON (V) Turn ON, Turn OFF time vs. LED forward current Turn ON, Turn OFF time vs. Ambient temperature Current leakage vs. Load voltage tON, tOFF - Ta ILEAK - VOFF tON, tOFF - IF 400 30 3000 Ta = 25 °C VDD = 10 V, RL = 200 Ω Ta=25 Ta = 25 °C ? VDD = 10 V, RL = 200 Ω 1000 IF = 5 mA 25 300 300 20 tOFF 100 tOFF 15 200 30 tON 10 tON 10 100 5 3 1 0 0.1 0.3 1 3 10 30 100 20 40 60 80 100 0 -20 020 40 60 80 100 LED forward current IF (mA) Load voltage (V) Ambient temperature Ta (°C) Output terminal capacitance vs. Load voltage COFF - VOFF 1.2 Ta = 25 °C Ta = 25 °C 1.0 0.8 0.6 0.4 0.2 0 010 20 30 40 Load voltage (V) ■ Safety Precautions • Refer to "Common Precautions" for all G3VM models. 2 Output terminal capacitance COFF/COFF (0V) Continuous load current IO (mA) LED forward current IF (mA) Turn ON, Turn OFF time tON, tOFF (µs) Turn ON, Turn OFF time tON, tOFF (µs) On-state resistance RON (Ω) Continuous load current IO (mA) Trigger LED forward current IFT (mA) LED forward current IF (mA) Current leakage ILEAK (pA) Appearance/Dimensions SOP4 type ■ Appearance SOP (Small Outline P SOP (Small Outline Pa ac ck kage) age) SOP4 Mold pin mark * OMRON logo Model name 932 LOT.No. Pin 1 mark Note: The actual product is marked differently from the image shown here. * The indentation in the corner diagonally opposite from the pin 1 mark is from a pin on the mold. ■ Dimensions (Unit: mm) Surface-mounting Terminals Actual Mounting Pad Weight: 0.1 g Dimensions 4.4±0.25 (Recommended Value, TOP VIEW) ±0.2 3.9 2.1 max. 6 to 6.3 0.15 1.2 ±0.1 ±0.3 0.8 0.4 0.6 ±0.1 0.1 ±0.4 7.0 2.54 ±0.25 2.54 Note: The actual product is marked differently from the image shown here. • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. • Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation ELECTRONIC AND MECHANICAL COMPONENTS COMPANY Contact: www.omron.com/ecb Cat. No. K189-E1-01 0412(0412)(O)