J Ultra Subminiature Basic Switch Subminiature Models Capable of Large-capacity load of 7A ● Snap-action switch allows large-capacity switching (7A at 250 VAC) in spite of its small J size. ● Particularly suitable as control switches for applications where there are restrictions on installation space and weight. RoHS Compliant Model Number Legend Contact Form ●SPDT 1 J-7- @ 1. Actuator None : Pin plunger V : Short hinge lever COM NO NC V22 : Short hinge roller lever V2 : Hinge roller lever Contact Specifications V3 : Hinge lever V4 : Long hinge lever Specification Rivet Contact Material Silver alloy + Gold plated List of Models Gap (standard value) 0.35 mm Minimum applicable load (reference value) 5 VDC 1 mA Actuator Model Pin plunger J-7 Ratings Short hinge lever J-7-V Rated voltage Resistive load 125 VAC 7 A Short hinge roller lever J-7-V22 250 VAC 7 A Note. The above rating values apply under the following test conditions. Hinge roller lever J-7-V2 (1) Ambient temperature: 20±2°C (2) Ambient humidity: 65±5% Hinge lever J-7-V3 (3) Operating frequency: 30 operations/min Long Hinge Lever J-7-V4 Approved Safety Standards Note. Consult your OMRON sales representative for specific models with safety Consult your OMRON sales representative for specific standard approvals. models with safety standard approvals. UL (UL508)/CSA (CSA C22.2 No.55) Rated voltage Model J-7 125 VAC 7 A 250 VAC 7 A 1 J Subminiature Basic Switch Characteristics Permissible operating speed 0.05 mm to 1 m/s (for pin plunger models) Mechanical 400 operations/min max. Permissible operating frequency Electrical 30 operations/min max. Insulation resistance 100 mΩ min. (at 500 VDC with insulation tester) Contact resistance (initial value) 15 mΩ max. Between terminals of the same polarity 600 VAC 50/60 Hz for 1 min Dielectric strength Between current-carrying metal parts and ground 1,500 VAC 50/60 Hz for 1 min Between each terminals and non-current-carrying metal parts 1,500 VAC 50/60 Hz for 1 min J Vibration resistance *1 Malfunction 10 to 55 Hz, 1.5 mm double amplitude 2 Durability 1,000 m/s max. Shock resistance *1 2 Malfunction 200 m/s max. (pin plunger models) Mechanical 10,000,000 operations min. (60 operations/min) Durability *2 Electrical 50,000 operations min. (30 operations/min) Degree of protection IEC IP40 -10°C to +80°C (at ambient humidity of 60% max.) Ambient operating temperature (with no icing or condensation) Ambient operating humidity 85% max. (for +5°C to +35°C) Weight Approx. 1 g (pin plunger models) Note. The data given above are initial values. *1. For the pin plunger models, the above values apply for use at the free position, operating position, and total travel position. For the lever models, they apply for the total travel position. Close or open circuit of the contact is shorter than 1 ms. *2. For testing conditions, consult your OMRON sales representative. Dimensions (Unit: mm) and Operating Characteristics 3.5 dia. ●Pin Plunger 1.5 dia. 1.5 dia. 1.5 dia. J-7 A PT R0.8 Models Operating Characteristics J-7 Operating Force OF Max. 1.37 N {140 gf} Releasing Force RF Min. 0.27 N {28 gf} OP Pretravel PT Max. 0.6 mm 8.9 Overtravel OT Min. 0.1 mm 2.3 Movement Differential MD Max. 0.15 mm 5.1 +0.05 2.35 -0.025 Operating Position OP 8.1±0.3 mm + +0.05 0.05 0.05 2.5 2.5 2.5 dia. dia. dia. -0.025 -0.025 -0.025 1 dia. 3.95 +0.05 1.5 dia. 2.35 dia. ±0.05 -0.025 4.8 12.7 ±0.1 5.1 ●Short Hinge Lever 9.3 A t=0.3* PT J-7-V 2.3 R12.7±0.4 Models J-7-V Operating Characteristics Operating Force OF Max. 0.49 N {50 gf} Releasing Force RF Min. 0.09 N {9 g} ±0.4 9.15 8 OP Pretravel PT Max. 1.7 mm 6.6 Overtravel OT Min. 0.35 mm 2.3 Movement Differential MD Max. 0.5 mm 5.1 +0.05 2.35 Operating Position OP 8.3±1.2 mm -0.025 +0.05 +0.05 +0.05 2.5 2.5 2.5 dia. dia. dia. -0.025 -0.025 -0.025 1 dia. 3.95 1.5 dia. +0.05 2.35 dia. -0.025 ±0.05 4.8 12.7 ±0.1 5.1 14.7 * Stainless-steel lever t=0.3* A PT ●Hinge Lever 9.3 2.3 ±0.4 R22 J-7-V3 Models Operating Characteristics J-7-V3 Operating Force OF Max. 0.29 N {30 gf} 9.15±0.4 OP 8 Releasing Force RF Min. 0.05 N {5 gf} 6.6 Pretravel PT Max. 2.9 mm 2.3 Overtravel OT Min. 0.5 mm 5.1 +0.05 Movement Differential MD Max. 0.7 mm 2.35 -0.025 + +0.05 0.05 0.05 2.5 2.5 2.5 dia. dia. dia. -0.025 -0.025 -0.025 Operating Position OP 8.3±1.9 mm 1 dia. 3.95 1.5 dia. +0.05 2.35 dia. -0.025 4.8±0.05 12.7 5.1±0.1 14.7 * Stainless-steel lever Note 1. Unless otherwise specified, a tolerance of ±0.2 mm applies to all dimensions. Note 2. The operating characteristics are for operation in the A direction ( ). 2 J Subminiature Basic Switch ●Long Hinge Lever t=0.3* A PT 9.3 2.3 ±0.4 Models J-7-V4 R33.8 Operating J-7-V4 Characteristics Operating Force OF Max. 0.20 N {20 gf} Releasing Force RF Min. 0.03 N {3 gf} ±0.4 9.15 8 OP 6.6 Pretravel PT Max. 4.5 mm Overtravel OT Min. 0.8 mm 2.3 5.1 Movement Differential MD Max. 1.2 mm +0.05 2.35 -0.025 + +0.05 0.05 0.05 Operating Position OP 8.3±2.9 mm 2.5 2.5 2.5 dia. dia. dia. -0.025 -0.025 -0.025 1 dia. 3.95 +0.05 1.5 dia. 2.35 dia. -0.025 J ±0.05 4.8 12.7 ±0.1 5.1 14.7 * Stainless-steel lever PT ●Short Hinge Roller Lever 9.3 A 2 4.8x2.2* dia. J-7-V22 Models Operating J-7-V22 Characteristics R11.5±0.4 1 t=0.3* Operating Force OF Max. 0.54 N {55 gf} Releasing Force RF Min. 0.05 N {5 gf} OP Pretravel PTMax. 1.6 mm ±0.4 9.15 8 Overtravel OT Min. 0.25 mm 8.9 Movement Differential MD Max. 0.4 mm 2.3 Operating Position OP 14.7±1 mm +0.05 2.8 2.35 -0.025 + +0.05 0.05 0.05 2.5 2.5 2.5 dia. dia. dia. -0.025 -0.025 -0.025 dia. 1 3.95 +0.05 1.5 dia. 2.35 dia. -0.025 ±0.05 4.8 12.7 ±0.1 5.1 14.7 *1 Stainless-steel lever *2 Stainless-steel roller A PT ●Hinge Roller Lever 2 4.8x2.2* dia. J-7-V2 Models Operating J-7-V2 ±0.4 R20.5 Characteristics 9.3 Operating Force OF Max. 0.33 N {33 gf} 1 t=0.3* Releasing Force RF Min. 0.03 N {3 gf} OP Pretravel PT Max. 2.7 mm ±0.4 9.15 Overtravel OT Min. 0.45 mm 8 6.6 Movement Differential MD Max. 0.7 mm Operating Position OP 14.7±1.9 mm 2.3 5.1 +0.05 2.35 -0.025 + +0.05 0.05 0.05 2.5 2.5 2.5 dia. dia. dia. - -0.025 0.025 0.025 1 dia. 3.95 +0.05 1.5 dia. 2.35 dia. -0.025 ±0.05 4.8 12.7 ±0.1 5.1 14.7 *1 Stainless-steel lever *2 Stainless-steel roller Note 1. Unless otherwise specified, a tolerance of ±0.2 mm applies to all dimensions. Note 2. The operating characteristics are for operation in the A direction ( ). Precautions ★Please refer to "Common Precautions" for correct use. Caution Correct Use ●Soldering ●Mounting Terminal connection Use M2.3 mounting screw with plane washers or spring washers When soldering, make sure that the temperature of the to securely mount the Switch. Tighten the screws to a torque of soldering iron tip is not higher than 280°C, and complete the 0.2 to 0.29 N·m {2 to 3 kgf·cm}. soldering within 3 seconds. Leave it for 1 minute without applying any external force to the terminal after the soldering. Soldering at an excessively high temperature or soldering for more than 3 s may deteriorate the characteristics of the Switch. 3 J Subminiature Basic Switch J Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation Electronic and Mechanical Components Company Contact: www.omron.com/ecb Cat. No.B033-E1-05 1014(0207)(O) 4