Indicator (Rectangular) M2P CSM_M2P_DS_E_4_1 Large Rectangular-bodied Indicators • Excellent illumination with even surface brightness. Three-color models (green, orange, red; chameleon lighting) included in lineup. Refer to Safety Precautions for All Pushbutton Switches/ Indicators and Safety Precautions of A3P. List of Models Model Appearance 52 max. 6.7 M2PJ 25 (Rectangular) 32 52 max. 6.7 M2PA 25 (Square) 25 52 max. 6.4 M2PT (Round) 32 dia. ■ Panel cutout dimensions: Refer to page 12. ■ Dimensions: Refer to page 11. ■ Accessories, replacements, and tools: Refer to the A3P. ■ Specifications: Refer to the A3P. 1 M2P Model Number Structure Model Number Legend ..... The model numbers used to order sets of Units are illustrated below. One set comprises the Display, Lamp, and Socket. For information on combinations, refer to Ordering Information. (4) (5) 24E R ..........Single screen (1) (2) (3) Upper Lower M2P J -90A 1 1 - 24E RW ........................... Horizontal 2-split screen R (Red) Upper W (White) Lower (1) Shape of Display (2) Screen Pattern (3) Case Color (5) Color of Display For LED Symbol Shape Illumination-only models Symbol Color J Rectangular Symbol Screen pattern 1Black Symbol Color RRed A Square Single screen 2 Light gray T Round O Orange 1 Note: M2PT model is available in light gray only. G Green W White 2-split screen K Chameleon 2 • The chameleon screen pattern is not (4) Lighting Method available with M2PT models. LED-lighted Models • The chameleon screen pattern is only Chameleon *1 available with 12 or 24-VDC models. (M2PJ and M2PA Only) Symbol Rated voltage For Incandescent Lamp Note: The chameleon screen 05E 5 VDC Symbol Color G pattern is not available 12E 12 VDC with M2PT models. Red, Orange, The chameleon screen 24E 24 VDC No symbol White, Blue, pattern is only available Green with 12 or 24-VDC LED Lamp-lighted • Includes colored plate. Refer to page 8 models. Models (M2PT Only) for details. *1. With chameleon models, the whole screen • (Low-power incandescent lamp) lights red, green, or orange. When not lit, the Symbol Rated voltage display is white. 05C 5 VDC • The available rectangular models are shown 12C 12 VDC below. Select from among the individual products shown on page 7. 24C 24 VDC Vertical 2-split 4-split screen Note: M2PJ and M2PA can also be ordered separately. Refer to screen models models page 7 for details. Incandescent Lamp lighted Models Horizontal 3-split Vertical 3-split screen models screen models Symbol Rated voltage 06 6 VAC/VDC 14 14 VAC/VDC The above diagrams show the Sockets with 28 28 VAC/VDC the “ ” mark facing down. Colored-illumination models up to the 4-split screen models are available as Number of Built-in Number of Built-in individual LED Lamps Incandescent Lamps Units. Refer to page 7. Screen Screen A3PJ A3PA A3PT A3PJ A3PA A3PT “Colored-illumination” models operate pattern pattern in the way shown Single screen 2 Single screen 2 1 2 Built-in LED below: Horizontal 2- Horizontal 2- models --- 2--- Unlit Lit split screen split screen 4 (Low- White Color Vertical 2-split Vertical 2-split --- --- power screen screen The built-in incan- Horizontal 3- 4 3-split, descent LED is colored. split screen --- --- *2 E shape/ --- --- lamp) Vertical 3-split T shape *2 screen 4-split screen 4-split screen --- --- *2. These split screen models are available only as individual Units. They cannot be ordered as sets. 2 M2P Ordering Information Ordering as a Set ................................. The model numbers used to order sets of Units are given in the following tables. One set comprises the Display, Lamp, and Socket. M2PJ (Rectangular) Single Screen Models Rectangular (Single Screen) Single (1) screen Case color Black Light gray Display color symbol Lighting method 5 VDC M2PJ-90A11-05E(1) M2PJ-90A12-05E(1) R O LED 12 VDC M2PJ-90A11-12E(1) M2PJ-90A12-12E(1) G 24 VDC M2PJ-90A11-24E(1) M2PJ-90A12-24E(1) W 12 VDC M2PJ-90AG1-12EK M2PJ-90AG2-12EK Chameleon *1 24 VDC M2PJ-90AG1-24EK M2PJ-90AG2-24EK 6 VDC/VAC M2PJ-90A11-06 M2PJ-90A12-06 Incandescent 14 VDC/VAC M2PJ-90A11-14 M2PJ-90A12-14 *2 lamp 28 VDC/VAC M2PJ-90A11-28 M2PJ-90A12-28 Note: Enter the desired color symbol for the Display in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White. Example: Red MPJ-90A11-24E R *1. You can change the screen colors of chameleon models between red, green, and orange by changing the terminal wiring. Refer to page 14 for details. *2. Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milk-white and transparent). Use the appropriate combination. Rectangular (Single Screen) (1) 2-split screen (2) Case color Black Light gray Display color symbol Lighting method LED 24 VDC M2PJ-90A21-24E(1)(2) M2PJ-90A22-24E(1)(2) R O G W 6 VDC/VAC M2PJ-90A21-06 --- Incandes- 14 VDC/VAC M2PJ-90A21-14 M2PJ-90A22-14 * cent lamp 28 VDC/VAC M2PJ-90A21-28 M2PJ-90A22-28 Note: Enter the desired color symbols for the Display in (1) and (2). (R) = Red, (O) = Orange, (G) = Green, (W) = White. Example: Red Upper M2PJ-90A21-24E R W White Lower Red White * Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milk-white and transparent). Use the appropriate combination. Individual models: Refer to pages 6 to 8. ■ Specifications: Refer to the A3P. (The Display, Lamp, and Socket can be ordered separately.) ■ Dimensions: Refer to page 11. Accessories: Refer to the A3P. 3 M2P Ordering Information Ordering as a Set ..................................The model numbers used to order sets of Units are given in the following tables. One set comprises the Display, Lamp, and Socket. M2PA (Square) Single Screen Models Square Single (1) screen (Single Screen) Case color Black Light gray Display color symbol Lighting method 5 VDC M2PA-90A11-05E(1) M2PA-90A12-05E(1) LED 12 VDC M2PA-90A11-12E(1) M2PA-90A12-12E(1) ROGW 24 VDC M2PA-90A11-24E(1) M2PA-90A12-24E(1) 12 VDC M2PA-90AG1-12EK M2PA-90AG2-12EK Chameleon *1 24 VDC M2PA-90AG1-24EK M2PA-90AG2-24EK 6 VDC/VAC M2PA-90A11-06 M2PA-90A12-06 Incandescent 14 VDC/VAC M2PA-90A11-14 M2PA-90A12-14 *2 lamp 28 VDC/VAC M2PA-90A11-28 M2PA-90A12-28 Note: Enter the desired color symbol for the Display in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White. Example: Red M2PA-90A11-24E R *1. You can change the screen colors of chameleon models between red, green, and orange, by changing the terminal wiring. Refer to page 14 for details. *2. Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milk-white and transparent). Use the appropriate combination. (1) Square 2-split screen (Horizontal 2-split screen) (2) Case color Black Light gray Display color symbol Lighting method LED 24 VDC M2PA-90A21-24E(1)(2) M2PA-90A22-24E(1)(2) R O G W 6 VDC/VAC M2PA-90A21-06 M2PA-90A22-06 Incandescent 14 VDC/VAC M2PA-90A21-14 M2PA-90A22-14 * lamp 28 VDC/VAC M2PA-90A21-28 M2PA-90A22-28 Note: Enter the desired color symbols for the Display in (1) and (2). (R) = Red, (O) = Orange, (G) = Green, (W) = White. Example: Red Upper M2PA-90D21-24E R W White Lower Red White * Incandescent lamps are supplied with colored plates (white, red, green, blue, and orange) and legend plates (milk-white and transparent). Use the appropriate combination. M2PT (Round) Single Screen Models Round Single (1) (Single Screen) screen Case color Light gray Display color symbol Lighting method 5 VDC M2PT-90A12-05C(1) LED 12 VDC M2PT-90A12-12C(1) ROGW 24 VDC M2PT-90A12-24C(1) Incandescent 28 VDC/VAC M2PT-90A12-28 * lamp Note: Enter the desired color symbol for the Display in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White. Example: Red M2PT-90A12-24C R * Incandescent lamps are supplied with a colored plates (white, red, green, blue, and orange). Use the appropriate combination. Models A3PT and M2PT (round models), however, are not supplied with legend plates. Individual models: Refer to pages 6 to 8. ■ Specifications: Refer to the A3P. (The Display, Lamp, and Socket can be ordered separately.) ■ Dimensions: Refer to page 11. Accessories: Refer to the A3P. 4 M2P Ordering Information Illumination-only and Colored-illumination LED Models “Illumination only” describes LED models for which the screen color is the same whether the LED is lit or not. The screen simply becomes brighter when the LED lights. Example: Red LED Not lit Cap (transparent) Red Lit Legend plate (transparent) Red Display Colored plate (red) Lamp holder LED lamp (red) - - - Lamp “Colored illumination” describes LED models for which the screen color is white when the LED is not lit and changes to the color of the LED lamp when the LED is lit. Example: Red LED Not lit Cap (transparent) White Lit Legend plate (transparent) Red Display Colored plate (white) Lamp holder LED lamp (red) - - - Lamp Ordering: For a colored-illumination Indicator, order the Display, Lamp, and Socket as shown in the following table. Display Lamp Socket • Select the LED lamp-lighted model required • Select the LED lamps to suit your desired • Select from the Sockets on page 8. from the selection on page 7. Each assembly coloration from the selection on page 8. includes the number of white colored plates • Number of necessary LED lamps (standard): required to enable colored illumination for M2PJ (rectangular): 4 the corresponding screen-split configuration. M2PA (square): 2 For example, 4-split screen models includes M2PT (round): 2 4 white colored plates. 5 M2P Ordering Information Ordering Individually....... Displays, Lamps, and Sockets can be ordered separately. Combinations that are not available as sets can be created using individual Units. Also, store the parts as spares for maintenance and repairs. LED-lighted/Chameleon Models LED Lamp-lighted Models Incandescent Lamp-lighted Models (LED is built into the Display.) (LED lamp and Display are separate.) (Incandescent lamp and Display are separate.) Display Display Display Round (M2PT) models not available. • M2P@-5@@@-@@E • M2P@-502@ • M2P@-501@ (for Indicator) (for Indicator) (for Indicator) Lamp (LED Lamp) *1 Lamp (Incandescent Lamp) *2 • Standard lamp: SLL-@@ • Low-power lamp: SLL-@@H SLL-@@E@ Socket * Socket * Socket * • M2P@-7@@@-@ • M2P@-7@@@-@ • M2P@-7@@@-@ (for Indicator) (for Indicator) (for Indicator) * The Socket is compatible with LED-lighted, LED lamp-lighted, and incandescent lamp-lighted models. *1. Number of necessary LED lamps. *2. Number of necessary incandescent lamps. Screen pattern M2PJ M2PA M2PT Screen pattern M2PJ M2PA M2PT Single screen 2 2 Single screen 2 1 2 Horizontal 2-split Horizontal 2-split 2--- 2 --- screen screen 4 (low- Vertical 2-split Vertical 2-split 4 --- --- --- --- power in- screen screen candes- Vertical 3-split screen Vertical 3-split screen cent --- --- --- --- Horizontal 3-split screen Horizontal 3-split screen lamp) 4-split screen --- --- 4-split screen --- --- Ordering set combinations: Refer to pages 3 to 4. ■ Specifications: Refer to the A3P. ■ Dimensions: Refer to page 11. Accessories: Refer to the A3P. 6 M2P Ordering Information Ordering Individually .......Displays, Lamps, and Sockets can be ordered separately. Combinations that are not available as sets can be created using individual Units. Also, store the parts as spares for maintenance and repairs. Display LED-lighted Models (LED is built-in.) Split-screen color Appearance White (W) Red (R) Green (G) Orange (O) Selection precautions (color symbol) Single • Enter the voltage to be Rectangular M2PJ-5701-@@E M2PJ-5702-@@E M2PJ-5703-@@E M2PJ-5706-@@E screen used in the @@ at the models end of the model White M2PJ-5711-@@E M2PJ-5712-@@E M2PJ-5713-@@E M2PJ-5716-@@E number. Red Horizontal M2PJ-5721-@@E M2PJ-5722-@@E M2PJ-5723-@@E M2PJ-5726-@@E Examples of voltage 2- 2 split used: Green M2PJ-5731-@@E M2PJ-5732-@@E M2PJ-5733-@@E M2PJ-5736-@@E screen 5 V= 0 5 E Orange 12 V= 1 2 E M2PJ-5741-@@E M2PJ-5742-@@E M2PJ-5743-@@E M2PJ-5746-@@E 24 V= 2 4 E Single M2PA-5701-@@E M2PA-5702-@@E M2PA-5703-@@E M2PA-5706-@@E Horizontal 2-split Square screen models screen models White M2PA-5711-@@E M2PA-5712-@@E M2PA-5713-@@E M2PA-5716-@@E support only 24V. • For the color of the Red Horizontal M2PA-5721-@@E M2PA-5722-@@E M2PA-5723-@@E M2PA-5726-@@E shaded part, select the 2-split Green M2PA-5731-@@E M2PA-5732-@@E M2PA-5733-@@E M2PA-5736-@@E model according to the screen colors given at the top Orange M2PA-5741-@@E M2PA-5742-@@E M2PA-5743-@@E M2PA-5746-@@E of the table. Note: 1. A cap, legend plate (transparent), colored plate, white plunger case, and LED (with a current-limiting resistor) are built into the standard lighting unit. 2. Split-screen coloring configurations are given with the “ ” mark on the Sockets facing down. LED Lamp-lighted Models (LED is not built-in.) Rectan- Square Round Model gular models models Selection precautions models Screen pattern Screen Model Screen Model Screen Model • Colored plates (white, red, green, and orange), a legend Single screen M2PJ-5021 M2PA-5021 M2PT-5021 plate (transparent), and a light baffle (split-screen models only) are included. Use the appropriate combination for the LED coloring required. Horizontal 2-split • The number of white colored plates required to enable M2PJ-5022 M2PA-5022 --- screen colored illumination for the corresponding screen-split configuration is included. (For example, 4-split screen Vertical 2-split models include 4 white colored plates). M2PJ-5023 --- --- screen • The number of colored plates included for each model are shown in the following table. Horizontal 3-split M2PJ-5024 --- --- Screen pattern White Red Green Orange screen Single screen 1 1 1 1 Vertical 3-split Horizontal 2-split screen M2PJ-5025 --- --- 2 111 screen Vertical 2-split screen Horizontal 3-split screen 3 222 Vertical 3-split screen * 4-split screen M2PJ-5026 --- --- 4-split screen 4 1 1 1 * The following types of colored plates are included with Horizontal and Vertical 3-splitScreen Switches. White: One colored plate for a 2-split screen and two colored plates for a 4-split screen. Red, green, or orange: One colored plate for a 2-split screen and one colored plates for a 4-split screen. Ordering set combinations: Refer to pages 3 to 4. ■ Specifications: Refer to the A3P. ■ Dimensions: Refer to page 11. Accessories: Refer to the A3P. 7 M2P Ordering Information Ordering Individually...........Displays, Lamps, and Sockets can be ordered separately. Combinations that are not available as sets can be created using individual Units. Also, store the parts as spares for maintenance and repairs. Display Incandescent Lamp-lighted Models (Incandescent lamp is not built-in.) Rectan- Square Round Model gular models models Selection precautions models Screen pattern Screen Model Model Model Model Model • Colored plates (white, red, green, orange, and blue), a legend Single screen M2PJ-5011 M2PA-5011 M2PT-5011 * plate (transparent), and a light baffle (split-screen models only) are supplied. Horizontal 2- * M2PT (round) models do not contain a legend plate. M2PJ-5012 M2PA-5012 --- split screen • The number of colored plates supplied is shown in the following Vertical 2-split table. M2PJ-5013 --- --- screen Screen pattern White Red Green Orange Blue Horizontal 3- M2PJ-5014 --- --- Single screen 11 11 1 split screen Horizontal 2-split screen 11 11 1 Vertical 3-split M2PJ-5015 --- --- Vertical 2-split screen screen Horizontal 3-split screen 22 22 2 Vertical 3-split screen * 4-split screen M2PJ-5016 --- --- 4-split screen 2 2 2 2 2 * The following types of colored plates are included with Horizontal and Vertical 3-splitScreen Switches. All colors: One colored plate for a 2-split screen and one colored plate for a 4-split screen. Chameleon Models (with Built-in LED) Shape Rated voltage Chameleon indicator 12 VDC M2PJ-5800-12E Rectangular 24 VDC M2PJ-5800-24E 12 VDC M2PA-5800-12E Note: 1. With the chameleon models, the whole screen lights red, green, Square or orange (i.e., red and green simultaneously). 2. A cap, legend plate (transparent), white colored plate, and LED 24 VDC M2PA-5800-24E (with a current-limiting resistor) are built into the Display. Lamp (For mounting, refer to the A3P.) LED Lamp Voltage 5 VDC 12 VDC 24 VDC Applicable cap (color) Selection precautions (colored plate) Color Model (DC only) Model (DC only) Model (DC only) Red SLL-05ER SLL-12ER SLL-24ER Red In the standard setup, 4 LED lamps are Yellow SLL-05EY SLL-12EY SLL-24EY Orange used with M2PJ models and 2 LED lamps Green SLL-05EG SLL-12EG SLL-24EG Green are used with M2PA and M2PT models. White SLL-05EW SLL-12EW SLL-24EW White Incandescent Lamp Voltage Lamp type Standard lamp Low-voltage lamp Selection precautions • In the standard setup for M2PJ models, 2 lamps are used with single screen models, and 5 VAC/VDC SLL-06 SLL-06H 4 lamps are used with split-screen models. If 3 or 4 lamps are lit continuously, use low- power lamps. 12 VAC/VDC SLL-14 SLL-14H • In the standard setup for M2PA models, 1 lamp is used with single screen models, and 2 lamps are used with split-screen models. 24 VAC/VDC SLL-28 SLL-28H • In the standard setup for M2PT models, 2 lamps are used. Socket (common to both incandescent lamp-lighted and LED-lighted models) Rectangular Square Round Selection precautions Model Model Model • The end digit denotes the color of the flange: -1 denotes a M2PJ-7010-1 M2PA-7010-1 M2PT-7010-2 black flange, and -2 denotes a light gray flange. Round switches are available only in light gray, and not in black. Ordering set combinations: Refer to pages 3 to 4. ■ Specifications: Refer to the A3P. ■ Dimensions: Refer to page 11. Accessories: Refer to the A3P. 8 M2P Ordering Information Accessories Accessories are the same as those for the A3P Lighted Pushbutton Approved Standard Ratings Switches. Refer to the A3P. UL (File No. E41515), CSA (File No. LR45258) LED: 24 VDC max. LED and Incandescent Lamp Ratings and Incandescent lamp: 28 VAC/VDC,1.2 W max. Characteristics Note: Certification has been obtained for the Indicator. Ratings and characteristics the same as those for the A3P Lighted For detailed information on individual products that have received Pushbutton Switches. Refer to the A3P. certification, consult your supplier. Nomenclature Construction Lighting LED-lighted models LED lamp-lighted models Incandescent lamp-lighted models method (LED is built-in.) (LED is not built-in.) (Incandescent lamp is not built-in.) Models M2PJ M2PA M2PJ M2PA M2PT M2PJ M2PA M2PT Single Single Single Vertical 3-split Single Single Single Vertical 3-split Single Single screen screen screen screen screen screen screen screen screen screen Horizontal 2- Horizontal 2- Horizontal 2- Horizontal 3- Horizontal Horizontal 2- Horizontal 3- Horizontal split screen split screen split screen split screen 2-split split screen split screen 2-split Screen pat- screen screen tern Chameleon Chameleon Vertical 2- Vertical 2- 4-split 4-split (3-color) (3-color) split screen split screen screen screen Incandescent LED-lighted models LED lamp-lighted models lamp-lighted models Chameleon models (full screen LED-lighted models illumination in one of three colors) Cap Cap Cap (transparent) (transparent) (transparent) Display (Split-screen models Legend plate * Legend plate contain light baffles.) Legend plate (transparent) (transparent) ●Display Colors: (transparent) · LED-lighted and LED Colored plate Colored plate Colored plate lamp-lighted models White, Red, Green, Orange · Incandescent lamp-lighted models LED Unit LED Unit Lamp holder White, Red, Green, Blue, Orange 3-color emitter Built-in * Incandescent lamp-lighted LED M2PT models do not contain legend plates. Lamp ●Case Color Socket Select either black or light gray to suit your panel design. (The round M2PT models are available in light gray only.) Note: The above diagram for LED lamp-lighted and incandescent lamp-lighted models shows the M2PJ model. 9 M2P Nomenclature M2P Lighting Method Diagram Single screen Horizontal 2-split LED-lighted • As a set: See page 3. models screen models models • Individually: See page 6. Single screen Horizontal 2-split Vertical 2-split models screen models screen models LED LED lamp-lighted • Individually: See page 6. models models (Not available as a set.) Vertical 3-split Horizontal 3-split 4-split screen screen models screen models models M2PJ Single screen models (rectangular) • As a set: See page 3. Chameleon • Individually: See page 6. models (Full screen illumination in one of three colors) Single screen Horizontal 2-split Vertical 2-split models screen models screen models* As a set: See page 3. Incandescent Individually: See page 6. lamplighted models *Models indicated with an asterisk are only Vertical 3-split Horizontal 3-split 4-split screen available individually. screen models* screen models* models* Single screen Horizontal 2-split models screen models • As a set: See page 3. LED-lighted • Individually: See page 6. models Single screen Horizontal 2-split models screen models • Individually: See page 6. LED LED lamp-lighted (Not available as a set.) models models Single screen models M2PA • As a set: See page 3. (square) Chameleon • Individually: See page 6. models Single screen Horizontal 2-split models screen models • As a set: See page 3. Incandescent • Individually: See page 6. lamplighted models Single screen models • As a set: See page 3. LED LED lamp-lighted • Individually: See page 6. models models M2PT (round) Single screen models • As a set: See page 3. Incandescent • Individually: See page 6. lamplighted models 10 M2P Dimensions (Unit: mm) M2PJ (Rectangular) Models M2PA (Square) Models 22 29.9±0.2 26.1 2.8 OMRON logo #110 quick connect terminal OMRON logo #110 quick connect terminal /soldered terminal /soldered terminal 0.5 25±0.1 18.9 22.9±0.2 @19.1 25±0.1 22.9±0.2 6.7 43.6 32±0.1 43.6 6.7 25±0.1 52 max. 52 max. M2PT (Round) Models #110 quick connect terminal/soldered terminal 22.4 28.5 dia. OMRON logo 32 dia. 23.8 24.9 dia. 6.4 43.6 52 max. Note: Use a panel thickness of 0.5 mm for tab terminals #110 and solder terminals. Accessory Mounting Dimensions Dimensions for mounting accessories are the same as those for the A3P Lighted Pushbutton Switches. Refer to the A3P. 11 M2P Dimensions (Unit: mm) Panel Cutout M2PJ (Rectangular) Models Classification Mounting design Panel cutout Remarks ±0.3 30.5 ±0.1 25 Individual mount- ing (Horizontal) ±0.3 23.5 32±0.1 Panel cutout spacing between rows of 32n-1.5±0.3 ±0.1 Multiple mount- 25 12 n Units: ing (Horizontal) 23.5±0.3 32n±0.5 Flange 3 min. mount ±0.3 23.5 Mount to long mount- models ±0.1 Individual mount- 32 6 min. ing plate (A3PJ- ing (Vertical) 30.5±0.3 3002) before use. ±0.1 25 ±0.3 25n-1.5 Mount to long mount- Multiple mount- ±0.1 32 12n ing plate (A3PJ- ing (Vertical) ±0.3 3002) before use. 30.5 ±0.5 25n 36.4±0.3 Individual mount- 27 ing (Horizontal) ±0.3 23.5 39 For barrier mount models, refer to Ac- cessories on the A3P. Panel cutout spacing between rows of ±0.3 32.9n+3.5 27 1 2 n Multiple mount- Units: ing (Horizontal) 23.5±0.3 Dotted line indicates the position of each Barrier 33n+6±1 mounting barrier. mount ±0.3 29.4 models Mount to long mount- 1.3 6 min. Individual mount- 34 ing plate (A3PJ- ing (Vertical) 30.5±0.3 3002) before use. ±0.1 32 6 min. ±0.3 25.9n+3.5 Mount to long mount- Multiple mount- 12 n 34 ing plate (A3PJ- ing (Vertical) 30.5±0.3 3002) before use. ±1 26n+6 Note: 1. n: Number of Units 2. Recommended panel thickness: 1 to 5 mm 3. Mount the panel before mounting the Switch Guard. 4. If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the coating. M2PA (Square) Models Classification Mounting design Panel cutout Remarks ±0.3 Panel cutout spacing between rows of ±0.1 23.5 25 Individual mount- Units: ing ±0.3 ±0.1 22.5 25 Flange 33 min. mount models 23.5±0.3 6 min. Multiple mount- ±0.1 12 n 25 ing 25n±0.1 25n-2.5±0.3 Panel cutout spacing between rows of ±0.3 23.5 Units: Individual mount- 27 Dotted line indicates the position of each ing ±0.3 27.8 32 mounting barrier. Barrier mount 1.3 6 min. models Multiple mount- 23.5±0.3 271n 2 6 min. ing ±0.3 26n+2.5 ±1 26n+6.5 Note: 1. n: Number of Units 2. Recommended panel thickness: 1 to 5 mm 3. If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the coating. M2PT (Round) Models 6.4 dia. +0.2 R11.8 −0 ±0.3 dia. 29 Note: 1. Recommended panel thickness: 1 to 5 mm 2. If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the coating 4 min. 12 M2P Dimensions (Unit: mm) Terminal connections LED-lighted Models Rated voltage 5 VDC 12 VDC 24 VDC Screen Model pattern BOTTOM VIEW TOP VIEW BOTTOM VIEW TOP VIEW BOTTOM VIEW TOP VIEW Single screen NO1 NO1 NO1 L4− L4− L4− L2− L2− L2− L1− L1− L1− NC1 NC1 NC1 L3− L3− L3− LC+ LC+ LC+ C1 C1 C1 Terminal Lighting block Terminal Lighting block Terminal Lighting block arrangement arrangement arrangement M2PJ BOTTOM VIEW TOP VIEW BOTTOM VIEW TOP VIEW 2-split screen NO1 L4− NO1 L4− L2− L2− L1− L1− NC1 NC1 L3− LC+ L3− LC+ C1 C1 Terminal Lighting block Terminal Lighting block arrangement arrangement BOTTOM VIEW TOP VIEW BOTTOM VIEW TOP VIEW BOTTOM VIEW TOP VIEW Single screen NO1 NO1 NO1 LC+ L1− LC+ L1− LC+ L1− NC1 L2− NC1 L2− NC1 L2− C1 C1 C1 Terminal Terminal Lighting block Terminal Lighting block arrangement arrangement arrangement M2PA BOTTOM VIEW TOP VIEW BOTTOM VIEW TOP VIEW 2-split screen NO1 NO1 L1− LC+ LC+ L1− NC1 L2− NC1 L2− C1 C1 Terminal Lighting block Terminal Lighting block arrangement arrangement 13 M2P Incandescent Lamp-lighted/LED Lamp-lighted Models (All are shown with the OMRON logo facing down. The terminal arrangements are the same as for the LED-lighted models.) Model Rectangular M2PJ models Square M2PA models Round M2PT models Type TOP VIEW BOTTOM VIEW TOP VIEW BOTTOM VIEW TOP VIEW BOTTOM VIEW L2− NC LC+ L1− L1− L4− L1− LC+ L2− Indicator LC+ L2− L3− Terminal Lighting block Terminal Lighting block Terminal Lighting block arrangement arrangement arrangement LED Chameleon Models Rated voltage 24 VDC Model Rectangular M2PJ L2− model L1− L4− LC+ L3− Square M2PA model L1− LC+ L2− Terminal Arrangement and Coloring Chameleon Models LC+ LC+ LC+ Wiring L1- and L2- L1- L2- shorted Coloring Green Red Orange Safety Precautions Refer to Safety Precautions for All Pushbutton Switches/Indicators and Safety Precautions for the A3P. 14 Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 2015.5 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2015 All Right Reserved.