- SS-P Subminiature Basic Switch SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept S ● One-piece terminal construction to keep out flux. S ● A single leaf movable spring construction. P ● Conforms to North American and European safety Standards. ● 1 mm MIN Contact Gap Models available for Interlock applications RoHS Compliant Model Number Legend 12 3 SS- GP @@@ 1. Ratings 3. Terminals None : Solder terminals 3 : 125 VAC 3 A T : Quick-connect terminals (#110) 01 : 30 VDC 0.1 A D : PCB terminals 2. Actuator None : Pin plunger L : Hinge lever L13 : Simulated roller lever L111 : Long hinge lever List of Models ●0.5 mm Contact Gap Models Terminals Solder terminals Quick-connect terminals (#110) PCB terminals Ratings Actuator Pin plunger SS-3GP SS-3GPT SS-3GPD 3A Hinge lever SS-3GLP SS-3GLPT SS-3GLPD Simulated roller lever SS-3GL13P SS-3GL13PT SS-3GL13PD Pin plunger SS-01GP SS-01GPT SS-01GPD 0.1A Hinge lever SS-01GLP SS-01GLPT SS-01GLPD Simulated roller lever SS-01GL13P SS-01GL13PT SS-01GL13PD ●1 mm MIN Contact Gap Models Terminals Solder terminals Quick-connect terminals (#110) Ratings Actuator Contact form Long hinge 3A SPST-NO SS-3FL111P-3 SS-3FL111P-3T lever Contact Form ●SPDT ●SPST-NO (SS-3FP models) COM NO NC COM NO NC Dummy Separator (Sold Separately), Terminal Connector (Sold Separately) Refer to "Basic Switch Common Accessories" 1 - SS-P Subminiature Basic Switch Contact Specifications Approved Safety Standards UL (UL1054/CSA C22.2 No.55) Item Model SS-3P models SS-01P models SS-3FP models Model SS-3P / SS-3FP SS-01P Specification Rivet Crossbar Rivet Rated voltage Item Resistive load Material Silver Gold alloy Silver Contact 125 VAC 3 A 0.1 A Gap (standard 0.5 mm 0.5 mm 1 mm min. 30 VDC 3 A 0.1 A value) NC VDE (EN61058-1) Inrush 9 A max. - 9 A max. current NO Rated voltage Model SS-3P / SS-3FP SS-01P Minimum applicable load 125 VAC 3 A 0.1 A S 5 VDC 160 mA 5 VDC 1 mA 5 VDC 160 mA (reference value) * S 30 VDC 3 A 0.1 A * Please refer to "Using Micro Loads" in "●Precautions" for more P Testing conditions: 5E4 (50,000 operations) T55 (0 to 55°C) information on the minimum applicable load. Ratings SS-3P / Model SS-01P models SS-3FP models Rated voltage Item Resistive load 125 VAC 3 A 0.1 A 30 VDC 3 A 0.1 A Note 1. The above rating values apply under the following test conditions. (1) Ambient temperature: 20±2°C (2) Ambient humidity: 65±5% (3) Operating frequency: 20 operations/min Note 2. Consult your OMRON sales representative for information on models for other loads. Characteristics Item Model SS-3P models SS-01P models SS-3FP models Permissible operating speed 0.1 mm to 1 m/s (for pin plunger models) Permissible Mechanical 300 operations/min operating Electrical 30 operations/min frequency Insulation resistance 100 MΩ min. (at 500 VDC with insulation tester) Contact resistance (initial value) 50 mΩ max. 100 mΩ max. 50 mΩ max. Between terminals of the 1,000 VAC 50/60 Hz for 1 min same polarity Between current-carrying Dielectric 1,500 VAC 50/60 Hz for 1 min metal parts and ground strength *1 Between each terminals and non-current-carrying 1,500 VAC 50/60 Hz for 1 min metal parts Vibration Malfunction 10 to 55 Hz, 1.5 mm double amplitude resistance *2 2 Durability 1,000 m/s {approx. 100G} max. Shock resistance 2 Malfunction *2 300 m/s {approx. 30G} max. 100,000 operations min. Mechanical 1,000,000 operations min. (60 operations/min) (60 operations/min) 70,000 operations min. Durability *3 (20 operations/min, 125 VAC) 200,000 operations min. 100,000 operations min. Electrical (20 operations/min) (20 operations/min, 30 VDC) 100,000 operations min. (20 operations/min, 30 VDC) Degree of protection IEC IP40 Degree of protection against electric Class I shock Proof tracking index (PTI) 250 Ambient operating temperature -25°C to +85°C (at ambient humidity of 60% max.) (with no icing or condensation) Ambient operating humidity 85% max. (for +5 to +35°C) Weight Approx. 1.6 g (pin plunger models) Note. The data given above are initial values. *1. The values for dielectric strength shown are for models with a Separator (refer to "Micro Switch Common Accessories"). *2. The values are at Free Position and Total Travel Position values for pin plunger, and Total Travel Position value for lever. Close or open circuit of the contact is 1 ms max. *3. For testing conditions, consult your OMRON sales representative. 2 - SS-P Subminiature Basic Switch Terminals/Appearances (Unit: mm) ●Solder terminals ●Quick Connect Terminals (#110) ●PCB terminals (5.25) 1.8 3.9 7.3 11 3.3±0.1 ±0.1 3.3±0.1 3.3 7.1 3.2 1.85 3-1.2 1.3 ±0.2 8.8 3-1.6 dia. holes 0.5 2.15 8.55 3-0.8 0.5 3-2.8 6.4±0.2 0.5 15.5 16.1±0.2 S ±0.2 ±0.2 ±0.2 7.6 7.6 ±0.2 6.4 6.4 S P 16.1±0.1 ±0.1 8.8 3-1.35~1.5 dia. Mounting Holes (Unit: mm) 2-2.4 dia. mounting holes or M2.3 screw holes 9.5±0.1 Dimensions (Unit: mm) and Operating Characteristics The illustrations and dimensions are for models with solder terminals. Refer to "Terminals/Appearances" for details on models with quick connect terminals (#110) or PCB terminals. ●Pin plunger ±0.2 SS-3GP 7.55 Operating characteristics Model SS-3GP SS-01GP 3.5 SS-01GP PT 2 +0.075 ±0.07 . 2.35 dia 2.5 dia -0.05 Operating Force OF Max. 1.50 N {153 gf} A Releasing Force RF Min. 0.2 N {20 gf} +0.075 2.35 -0.05 OP 7.7 6.9 Pretravel PT Max. 0.6 mm Overtravel OT Min. 0.4 mm ±0.1 3.3 Movement Differential MD Max. 0.15 mm 7.3 Operating Position OP 8.4±0.3 mm 2.15 8.55 0.5 3-1.6 dia. holes 15.5 ±0.2 6.4 ±0.1 5.15 9.5 ±0.2 19.8 ●Hinge lever SS-3GLP t=0.3 Stainless-steel lever 3.6 A 14.5 Operating characteristics Model SS-3GLP SS-01GLP SS-01GLP ±0.07 2.5 dia. Operating Force OF Max. 0.5 N {51 gf} +0.075 FP Releasing Force RF Min. 0.05 N {5 gf} 2.35 -0.05 OP 7.7 6.9 Overtravel OT Min. 1.0 mm ±0.1 3.3 Movement Differential MD Max. 0.8 mm 7.3 Free Position FP Max. 13.6 mm +0.075 2.35 dia. -0.05 Operating Position OP 8.8±0.8 mm 2.15 8.55 0.5 3-1.6 dia. holes 15.5 ±0.2 6.4 9.5±0.1 5.15 ±0.2 19.8 ●Long hinge lever t=0.3 Stainless-steel lever 22.6 SS-3FL111P-3 3.6 A Operating characteristics Model SS-3FL111P-3 ±0.07 2.5 dia. Operating Force OF Max. 0.55 N {56 gf} +0.075 FP Releasing Force RF Min. 0.01 N {1 gf} 2.35 -0.05 OP 6.9 7.7 Overtravel OT Min. 1.0 mm 3.3±0.1 Movement Differential MD Max. 3.0 mm 7.3 Free Position FP Max. 16.8 mm +0.075 2.35 dia. -0.05 Operating Position OP 8.8±1.5 mm 3-1.6 dia. holes 2.15 8.55 0.5 15.5 ±0.2 6.4 ±0.1 5.15 9.5 ±0.2 19.8 Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Note 2. The operating characteristics are for operation in the A direction ( ). 3 - SS-P Subminiature Basic Switch ●Simulated roller lever SS-3GL13P 3.6 A 15.8 t=0.3 Stainless-steel lever R1.2 Operating characteristics Model SS-3GL13P SS-01GL13P SS-01GL13P 2.5±0.07 dia. Operating Force OF Max. 0.5 N {51 gf} Releasing Force RF Min. 0.05 N {5 gf} FP +0.075 2.35 OP -0.05 7.7 6.9 Overtravel OT Min. 1.0 mm Movement Differential MD Max. 0.8 mm ±0.1 3.3 7.3 Free Position FP Max. 15.5 mm +0.075 Operating Position OP 10.7±0.8 mm 2.35 dia. -0.05 2.15 8.55 0.5 3-1.6 dia. holes 15.5 6.4±0.2 ±0.1 5.15 9.5 19.8±0.2 S S Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. P Note 2. The operating characteristics are for operation in the A direction ( ). Precautions ★Please refer to "Common Precautions" for correct use. Cautions Correct Use ●Soldering ●Mounting • Connecting to Solder Terminals Use M2.3 mounting screw with plane washers or spring washers Complete the soldering at the iron tip temperature of 350 to to securely mount the Switch. Tighten the screws to a torque of 400°C within 5 seconds, and do not apply any external force 0.23 to 0.26 N·m {2.3 to 2.7 kgf·cm}. for 1 minute after soldering. Soldering at an excessively high ●Using Micro Loads temperature or soldering for more than 5 seconds may Using a model for ordinary loads to open or close the contact of deteriorate the characteristics of the Switch. a micro load circuit may result in faulty contact. Use models that • Connecting to PCB terminals operate in the following range. However, even when using micro When using automatic soldering baths, we recommend load models within the following operating range, if inrush soldering at 260±5°C within 5 seconds. Make sure that the current occurs when the contact is opened or closed, it may liquid surface of the solder does not flow over the edge of increase the contact wear and so decrease durability. Therefore, the board. insert a contact protection circuit where necessary. The N-level When soldering terminals manually, complete the soldering reference value applies for the minimum applicable load. This at the iron tip temperature between 350 to 400°C within 3 value indicates the malfunction reference level for the reliability seconds, and do not apply any external force for 1 minute level of 60% (λ60). after soldering. When applying solder, keep the solder away (JIS C5003) from the case of the Switch and do not allow solder or flux to -6 The equation, λ60=0.5×10 /operation indicates that the flow into the case. 1 estimated malfunction rate is less than operations with 2,000,000 a reliability level of 60%. 0.16 mA 26 mA 100 mA 30 24 Operating range for Operating range for general-load micro-load model model SS-01P SS-3P 12 5 1 mA 100 mA 160 mA 0 0.1 1 10 100 1,000 Current (mA) 4 Voltage (V) - SS-P Subminiature Basic Switch S S P Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation Electronic and Mechanical Components Company Contact: www.omron.com/ecb Cat. No.B108-E1-05 0716(0207)(O) 5